Related
Hi Guys -
First time android user and attempted rooting using the odin method. I followed the instruction listed here http://forum.xda-developers.com/showthread.php?t=1311194 to the "T" before starting. I was doing alright until after flashing the recovery-cwm-hercules.tar, then it gets weird. It didn't flash to recovery but just rebooted to the main screen (where I could see the background picture with the locker pattern), then it immediately shuts off and the cycle begins again.
The weird thing is that I can't even access recovery mode (hold vol. up+down+power), because I'll see the Clockworkmod logo then it flickers and reboot itself. This happens every time I attempted recovery mode.
My attempts to fix it:
1. I flashed the recovery, http://forum.xda-developers.com/showthread.php?t=1315390, to see if it makes any difference. The same story happens with loading to main screen w/locker then it reboots itself again and again. Sometimes I'll be lucky to input the pattern but before soon it will reboot itself again. Same thing with recovery mode as described above.
2. Flashing the stock kernel provided by http://forum.xda-developers.com/showthread.php?t=1311229 to see if it does anything. Nope, same story for both recovery mode/home screen.
3. The insecure kernel, http://forum.xda-developers.com/showthread.php?t=1320946. Same story. nope, nope.
4. Tried these in all order and permutation. Nada.
5. Tried it both ways using samsung driver/kies.
6. Tried it both ways with/without SIM card.
7. Battery is fully charged when attempting any flashing.
8. All the above in my second computer to no avail.
I'm sorry if this might come across as long winded but I just want you guys to get the full picture. I would really appreciate it if you guys could offer any solutions or advice on how to correct this problem. Please be gentle with this first time android user haha, thanks in advance man.
Manually boot into recovery (vol up/down keys) and make a backup (be sure to do this). Then try wipe data/factory reset through recovery. Sounds like a ROM issue not a hardware issue
First off, thanks roman for the quick reply. That's the thing I can't get to recovery manually with the button combinations. When I do that it gives me this message:
[Picture]White dropbox/mail box with a yellow arrow pointing to the Android
"Verifying internal mmc block
Checksum confirmation check (0)
No need checksum confirmation already exceuted
#manual mode#"
It would then reboot and goes to the screen with the locker then immediately repeats that cycle. It doesn't have any wipe options/restart now/etc.
No way to power it down except with battery removal. I've attempted what you suggested many times too to no avail.
redlaws said:
First off, thanks roman for the quick reply. That's the thing I can't get to recovery manually with the button combinations. When I do that it gives me this message:
[Picture]White dropbox/mail box with a yellow arrow pointing to the Android
"Verifying internal mmc block
Checksum confirmation check (0)
No need checksum confirmation already exceuted
#manual mode#"
It would then reboot and goes to the screen with the locker then immediately repeats that cycle. It doesn't have any wipe options/restart now/etc.
No way to power it down except with battery removal. I've attempted what you suggested many times too to no avail.
Click to expand...
Click to collapse
Ok, so if it actually boots into the ROM but reboots, try rebooting to recovery from adb -- "adb reboot recovery"
think it's a no go . i tried using adb recovery method and the same thing would occur, it would restart and seems to load into recovery mode but then I would only see the logo, then it flickers and restart itself.
then the vicious cycle of loading up to the screen-locker and restarting itself begins. guess this is the smartphone version of being friend-zoned.
Have you tried taking battery out then back in and while holding volume up/down plug it back into computer? That has never failed to get me into d/l mode. Man I hope you get it working.
Yeah I tried that and getting to download mode is not the problem. just that recovery mode doesn't boot properly in that it would restarts itself. and when i boot normally to screen, i would see the locker and background picture then within 3 secs, it would restart itself.
Guess last resort is to go to t-mobile store, play dumb, and get samsung on it. only problem is that i worry about the flash rom counter # since mine is like 10 already (my attempts to address this problem). Let's hope those tmobile reps aren't that tech savvy.
Thanks for all the help fellas, great early posting experiences so far.
I'm sorry I've read your post..and i'm confuse, if you're able to go into download mode, then why could you just start Odin and flash the recovery again. If its unsuccessful then check the MD5 to see if you have a bad download. I think you should download the recoveries files again add give Odin another shot..Good luck..
Sent from my SGH-T989 using XDA App
are you able to go into CW recovery ?
if so, you can mount the USB, download a stock ROM, and then flash it using CWR
kt0ce said:
I'm sorry I've read your post..and i'm confuse, if you're able to go into download mode, then why could you just start Odin and flash the recovery again. If its unsuccessful then check the MD5 to see if you have a bad download. I think you should download the recoveries files again add give Odin another shot..Good luck..
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
I'm going to give it another try. I've been trying it with different files for a good 2 days now though.
AllGamer said:
are you able to go into CW recovery ?
if so, you can mount the USB, download a stock ROM, and then flash it using CWR
Click to expand...
Click to collapse
I understand that but that's the a big problem. If I could go to CW it would be a different story but I can't go into CW recovery. I would be able to see the logo CWR and the version number then immediately it shuts off again and reboot. Happens every time without fail.
redlaws said:
I understand that but that's the a big problem. If I could go to CW it would be a different story but I can't go into CW recovery. I would be able to see the logo CWR and the version number then immediately it shuts off again and reboot. Happens every time without fail.
Click to expand...
Click to collapse
did you let go of holding the vol+ & vol- buttons as soon as you see the blue text in CWR ?
it can easily reboot by accident when holding those buttons and hitting power, but the buttons are so responsive it selected the first option to reboot the phone by accident a couple of times on me
I'm positive that I held it properly and long enough. I never got to the blue text, just the CWR logo showing then turns off (like you shutting off a tv) and reboots itself. Trying to flash it again with Odin didn't work either and I tried the recoveries from different sources as well.
I went to the Tmobile store today and seems like they'll mail me a replacement then I'll return my current one to them. Only thing is stocking/processing fee but it's a small price to pay if it resolves everything.
glad they will give you another one..
Dude if you can get into download mode then it can most likely be fixed by flashing stock through odin. This would save you some $$. Just saying.
reocej said:
Dude if you can get into download mode then it can most likely be fixed by flashing stock through odin. This would save you some $$. Just saying.
Click to expand...
Click to collapse
Dude, I understand that it should but it's not. I've flashed the stock recovery for more than 10 times and I still can't past the home screen. It would just reboot itself in less than 3 sec. And I'm positive I flashed it properly. Believe me I don't want to spend extra money if I don't have too.
hi, i just decided to root my t mobile note 3 device so the first website was tellin about KINGO 1 step root so i did install KINGO and it said successfully rooted and i clicked finish the phone rebooted and it showed me
Recovery Booting
Set Warranty Bit : Recovery
and this screen keeps looping and i cant even enter recovery mod once the phone turns on it shows me that and it keep looping auto reboot same screen
im not sure if my phone is still alive anymore
any solutions?
thanks.
note 3 t-mobile n900t
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
same prob
Frank Westlake said:
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
Click to expand...
Click to collapse
Same problem as OP, and I can not get into download mode either. If I do as above, it still goes on booting .
saeidzzz said:
hi, i just decided to root my t mobile note 3 device so the first website was tellin about KINGO 1 step root so i did install KINGO and it said successfully rooted and i clicked finish the phone rebooted and it showed me
Recovery Booting
Set Warranty Bit : Recovery
and this screen keeps looping and i cant even enter recovery mod once the phone turns on it shows me that and it keep looping auto reboot same screen
im not sure if my phone is still alive anymore
any solutions?
thanks.
note 3 t-mobile n900t
Click to expand...
Click to collapse
If the advice above didn´t work (nothing happened when pressing the usual VOL down - home - power etc), this is how I managed:
I tried booting around 25 times with the power button released at different times. Did not work.
Tried to insert battery when pressing the 3 buttons. Did not work.
I let the battery run completely empty. Started charging the phone and pressing the 3 buttons. Did not work.
I charged the phone full (with booting the whole time....needed to put it somewhere quiet). After estimating it was full, I pulled out the battery, preparing to send it to mobiletechvideos.com (they saved me before). After a few hours I wanted to see the error message so I could write them. When I inserted the battery, I got the regular download mode! Nowthen, would I dare to boot it since I am not really sure what to flash to my phone?
I rebooted, and now the phone is back to normal. OTOH, I will not try to flash CWM/TWRP again, so goodbye custom roms (Omega )
you are a life saver!
Frank Westlake said:
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
Click to expand...
Click to collapse
I thought I was going to have to factory reset my phone like other forums suggested and lose everything. Thanks to your suggestion I was able to get out of recovery reboot loop. Thank you!
Thanks for your help, you are a lifesaver lol! I saved so much money and time because of you. Have a great day
Frank Westlake said:
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
Click to expand...
Click to collapse
But how to enter recovery it still says set warranty bit recovery
i am facing problem with set warranty bit: recovery in samsung J5 model...
samsung j5 500f
i have the same problem when i flash twrp recovery..any solution ????
Ghats normal
Sent from my SM-N900T using XDA-Developers mobile app
My Fix
I held down the Down volume key along with the power and spammed the home button until the download screen came on, just keep spamming it while holding down the other keys, it will reboot just keep spamming, then I plugged it in to my computer, opened Odin and re installed the Root and it booted up fine
ulop3z said:
I held down the Down volume key along with the power and spammed the home button until the download screen came on, just keep spamming it while holding down the other keys, it will reboot just keep spamming, then I plugged it in to my computer, opened Odin and re installed the Root and it booted up fine
Click to expand...
Click to collapse
Um. U might wanna flash back to stock. Your phone shouldn't do that. Ur messing up your bootloader. Flash newest firmware via Odin
Sent from my Samsung SM-N900T using XDA Labs
Tmobilefan906 said:
Um. U might wanna flash back to stock. Your phone shouldn't do that. Ur messing up your bootloader. Flash newest firmware via Odin
Sent from my Samsung SM-N900T using XDA Labs
Click to expand...
Click to collapse
The phone is fine now, it was just stuck on the loop and spamming home was the only way out, its fine now I've had no problems and it boots up fine
This happens...
This happens to almost everyone at some point of time. There is no need to worry as you just need to flash recovery like TWRP or CWM. To shed some light on this issue... boot loops mainly happen when you uses the incorrect version of software with your ROM or stock firmware. By using youtube you can look at the videos of your phone model and find the recovery version number needed.
For anyone who has a Note 3 T-Mobile phone who is still stuck! I am willing to make a video to show how to fix this and provide all the firmware/version numbers + links in one bundled location to make it easier.
ALL PHONES ARE VERY specific... ONLY USE THE CORRECT FIRMWARE FOR YOUR MODEL PHONE
Again, if you have a Samsung Note 3 T-Mobile, model number SM-N900T and are still lost. Let me know so I can shot a video and bundle files needed.
---------- Post added at 08:44 AM ---------- Previous post was at 08:38 AM ----------
cdresor said:
If the advice above didn´t work (nothing happened when pressing the usual VOL down - home - power etc), this is how I managed:
I tried booting around 25 times with the power button released at different times. Did not work.
Tried to insert battery when pressing the 3 buttons. Did not work.
I let the battery run completely empty. Started charging the phone and pressing the 3 buttons. Did not work.
I charged the phone full (with booting the whole time....needed to put it somewhere quiet). After estimating it was full, I pulled out the battery, preparing to send it to mobiletechvideos.com (they saved me before). After a few hours I wanted to see the error message so I could write them. When I inserted the battery, I got the regular download mode! Nowthen, would I dare to boot it since I am not really sure what to flash to my phone?
I rebooted, and now the phone is back to normal. OTOH, I will not try to flash CWM/TWRP again, so goodbye custom roms (Omega )
Click to expand...
Click to collapse
Don't be scared by this... just choose the correct versions before blindly trying to install a ROM. Also, only use links from main sources if you dont fell like auditing the code!
Hi guys, sorry for might be late about helping you now years later... But recently I've found something interesting about fixing this issue.
*****
Fix: (100% working in Galaxy Grand Prime SM-G530H)
UPDATED: More detailed info!
# Before flashed Recovery or Root:
1. Root device using Odin or any other rooting known workaround.
2. Backup Recovery (optional), and Kernel using Rashr (available on PlayStore).
3. Flash Custom Recovery (TWRP), using Odin PC software or TWRP android app.
4. Flash backed-up Kernel.img file to Boot partition using TWRP install section.
5. Reboot system (It may take a few time to boot)
# After flashed Recovery or Root: (accidentally or without knowing)
1. Search online and download your exact Phone Stock Kernel.
2. Follow *before flashed* above ↑ from 3rd.
Bonus info:
Even after flashing TWRP, you might be able to Boot device yet, by going to TWRP → Advanced → Reboot system. (It bypass bootlooping to Recovery, while: “Set Warranty Bit : Recovery”).
That's all! Try at your own, then share it!
if you are stuck at samsung logo after flashing with odin
here's what you have to do:
1. While on Samsung logo. press power key + volume up and down + home button (all together)
2. When the screen is off. Press Power key + Volume Up + home button to enter recovery mode.
3. Wipe Data
4. Wipe Cache
5. Reboot to system
you should be fine right now ^^
cheers!
lexjay said:
if you are stuck at samsung logo after flashing with odin
here's what you have to do:
1. While on Samsung logo. press power key + volume up and down + home button (all together)
2. When the screen is off. Press Power key + Volume Up + home button to enter recovery mode.
3. Wipe Data
4. Wipe Cache
5. Reboot to system
you should be fine right now ^^
cheers!
Click to expand...
Click to collapse
I'm having that problem now. I followed your instructions and got to the recovery mode or "Odin Mode" and it's been saying it's downloading for about 10 min or so. Any idea on how long it should take ?
casual167 said:
I'm having that problem now. I followed your instructions and got to the recovery mode or "Odin Mode" and it's been saying it's downloading for about 10 min or so. Any idea on how long it should take ?
Click to expand...
Click to collapse
Actually I believe it's the download mode that I'm in. It doesn't seem to get to the recovery mode when I press the Volume up key and power button for some reason.. Am I doing something wrong
casual167 said:
Actually I believe it's the download mode that I'm in. It doesn't seem to get to the recovery mode when I press the Volume up key and power button for some reason.. Am I doing something wrong
Click to expand...
Click to collapse
Follow these instructions implicitly.
Hold POWER + VOL DOWN + HOME.
As soon as it restarts change to VOL UP while still holding the other buttons.
Do NOT let go of any of the buttons until recovery boots.
ashyx said:
Follow these instructions implicitly.
Hold POWER + VOL DOWN + HOME.
As soon as it restarts change to VOL UP while still holding the other buttons.
Do NOT let go of any of the buttons until recovery boots.
Click to expand...
Click to collapse
That's what I've been doing exactly but for some reason it just goes right back to the logo screen. I was able to get into the recovery mode one time out of 100 and I went through the process of factory reset but it didn't solve the problem. Now I can't get back into it. It's weird because I have no problem getting into the download mode pressing the volume down but volume up doesn't seem to work. Not sure why or what to do
I'd try reflashing stock recovery then try booting into it again.
If it flashes then you should be able to boot into it.
http://www.mediafire.com/?qyybs0m1yln443x
ashyx said:
I'd try reflashing stock recovery then try booting into it again.
If it flashes then you should be able to boot into it.
http://www.mediafire.com/?qyybs0m1yln443x
Click to expand...
Click to collapse
How exactly would I do that? I'm not to inclined when it comes to this stuff so any help you can give would be appreciated
Install Samsung usb drivers, put your tab into download mode, connect to pc, run Odin, load the file into the AP slot then click start.
http://forum.xda-developers.com/attachment.php?attachmentid=3109599&d=1420980613
i think i bricked mine...
These are the 2 screens i get whenever i try anything
joker616 said:
i think i bricked mine...
These are the 2 screens i get whenever i try anything
Click to expand...
Click to collapse
You haven't bricked anything, there could be any number of reasons why it won't boot past the logo.
Easiest way to resolve it would be to reinstall the stock rom.
The second image is download mode.
joker616 said:
i think i bricked mine...
These are the 2 screens i get whenever i try anything
Click to expand...
Click to collapse
That's the exact same situation I'm in. Every time I restart it I can't get passed that damn Samsung logo screen. I tried the whole flash with Odin process but I realized that when I connect the tablet to the computer, I get an "MTP Device Driver Failed" message so I'm assuming since the computer doesn't recognize it, even tried with KEIS and it doesn't, that I'm unable to complete the Odin job because that goes until 'Initialization' and stops there. Were you able to fix yours?
casual167 said:
That's the exact same situation I'm in. Every time I restart it I can't get passed that damn Samsung logo screen. I tried the whole flash with Odin process but I realized that when I connect the tablet to the computer, I get an "MTP Device Driver Failed" message so I'm assuming since the computer doesn't recognize it, even tried with KEIS and it doesn't, that I'm unable to complete the Odin job because that goes until 'Initialization' and stops there. Were you able to fix yours?
Click to expand...
Click to collapse
Are you saying you still can't get into recovery mode?
Also what is your device model?
ashyx said:
Are you saying you still can't get into recovery mode?
Also what is your device model?
Click to expand...
Click to collapse
No I can't. I've tried a thousand times in all different sequences of holding the three buttons and it just doesn't go. It's SM-T800. They screen shots on the first page is exactly what I get. Either the logo screen when trying to get into recovery or download mode which it has no problem going into.
casual167 said:
No I can't. I've tried a thousand times in all different sequences of holding the three buttons and it just doesn't go. It's SM-T800. They screen shots on the first page is exactly what I get. Either the logo screen when trying to get into recovery or download mode which it has no problem going into.
Click to expand...
Click to collapse
The two files below should boot you directly into recovery as soon as you start the tablet if you can flash them. Flash with Odin from the AP slot.
Make sure you put the device into DOWNLOAD mode first then connect your usb cable!
You can then do a factory reset and then try and flash the stock rom.
Stock recovery
Twrp recovery
.
ashyx said:
The two files below should boot you directly into recovery as soon as you start the tablet if you can flash them. Flash with Odin from the AP slot.
Make sure you put the device into DOWNLOAD mode first then connect your usb cable!
You can then do a factory reset and then try and flash the stock rom.
Stock recovery
Twrp recovery
.
Click to expand...
Click to collapse
Yeah I tried that too but when I connect the tablet to my comp, I get this 'Samsung Mobile MTP Device Failed' message so my comp doesn't even recognize the tablet. I even tried connecting with KEIS but that doesn't see it either because of that error. Idk if that's related to this issue that I'm having but I'm assuming that since the comp doesn't recognize the tablet because of that error, it won't finish the ODIN job. I get up to 'Initialization' and nothing after. I tried uninstalling and reinstalling the Samsung drivers and that didn't work either. Seems I can't catch a break here
casual167 said:
Yeah I tried that too but when I connect the tablet to my comp, I get this 'Samsung Mobile MTP Device Failed' message so my comp doesn't even recognize the tablet. I even tried connecting with KEIS but that doesn't see it either because of that error. Idk if that's related to this issue that I'm having but I'm assuming that since the comp doesn't recognize the tablet because of that error, it won't finish the ODIN job. I get up to 'Initialization' and nothing after. I tried uninstalling and reinstalling the Samsung drivers and that didn't work either. Seems I can't catch a break here
Click to expand...
Click to collapse
Mtp, kies and anything else is irrelevant, they are OS dependent.
Just put the tablet into download mode. Download mode works in boot loader mode. No need for the os.
ashyx said:
Mtp, kies and anything else is irrelevant, they are OS dependent.
Just put the tablet into download mode. Download mode works in boot loader mode. No need for the os.
Click to expand...
Click to collapse
Ok than Idk why it doesn't go passed the 'Initialization'. I tried multiple times and keep getting stuck on that
casual167 said:
Ok than Idk why it doesn't go passed the 'Initialization'. I tried multiple times and keep getting stuck on that
Click to expand...
Click to collapse
Ok we need to take this step by step as theres something amiss here.
DID YOU AT ANY POINT WHILE THE TABLET WAS WORKING ENABLE 'REACTIVATION LOCK'?
1. Ensure the Samsung drivers are installed (important) Samsung usb driver
2. Before connecting anything to the PC put the tablet in DOWNLOAD mode first.
3. Plug the USB cable into a USB 2 port
4. Wait for the 'ADDED' message (if you dont get this it wont work)
5. Load the tar file into the AP slot.
6. Click START
7. If it doesn't start to flash reboot the tablet directly back into DOWNLOAD mode without touching anything else then unplug and replug the USB cable back in.
8. If it still doesn't flash try ODIN 3.07 ODIN
9. Report back and post a screenshot (if it doesn't work).
ashyx said:
Ok we need to take this step by step as theres something amiss here.
DID YOU AT ANY POINT WHILE THE TABLET WAS WORKING ENABLE 'REACTIVATION LOCK'?
1. Ensure the Samsung drivers are installed (important) Samsung usb driver
2. Before connecting anything to the PC put the tablet in DOWNLOAD mode first.
3. Plug the USB cable into a USB 2 port
4. Wait for the 'ADDED' message (if you dont get this it wont work)
5. Load the tar file into the AP slot.
6. Click START
7. If it doesn't start to flash reboot the tablet directly back into DOWNLOAD mode without touching anything else then unplug and replug the USB cable back in.
8. If it still doesn't flash try ODIN 3.07 ODIN
9. Report back and post a screenshot (if it doesn't work).
Click to expand...
Click to collapse
I know for a fact that I never enabled the Reactivation Lock.. But you know, after literally days and hours including my entire weekend just searching the internet and trying every possible fix scenario that people have tried, I just gave in and sent it to Samsung this afternoon to have them fix it. Nothing I was doing seemed to work and I do believe I tried everything within my little knowledge to try. Let me ask you though, when I get it back in normal working order, would going through the steps to install the TWRP recovery and a ROM prevent me from being in this situation again or at least be able to actually fix it on my own?
If you dont mind tripping Knox and possibly warranty then I believe installing custom recovery is one of the best tools you can Install to a device.
It can get you back to a working state in minutes if you make a full backup.
It's a no brainer to install custom recovery if you intend to root and modify the device in any way.
I have a SM-G925T and it started boot loop today. I tried to get into recovery mode by holding Power+VOL UP+Home but that does nothing. When I tried to go into download mode by holding Power+VOL DOWN+Home, it works fine.
Symptom:
Phone boot loops displaying only the very first Samsung screen with Galaxy s6 edge (no samsung boot animation). Once this very first logo screen comes on, the screen goes black and loops again. Even if I plug the OEM Samsung USB charging cable, screen does not show the battery charging screen, just the same Samsung Galaxy s6 edge screen.
I have already tried the following:
1. Flash stock rom using ODIN, flashed successfully, still boot loop
2. Holding Power+Vol DOWN to reset, still boot loop
3. Flash stock rom using ODIN again, flashed successfully, still boot loop
4. Let battery drain, waited 3 hours for screen to boot loop and battery died, plugged back USB charging cable back, still boot loop
5. Flick the power button many times to loosen any dirt, still boot loop
6. Hold the power button for 1 minute, 2 minute, and 3 minute, still boot loop
Please help, any advice very appreciated!
Hm, I had this 2 month ago with a S4...
Same thing, I go to my provider he checked the Handy and said I have a defect on my Mainboard... He use dos tools for Handy analysis... I flash stock with Odin, too... Success but no boot...
CarHDRom V.27.3 by Carotix S6edge
nyknight77 said:
I have a SM-G925T and it started boot loop today. I tried to get into recovery mode by holding Power+VOL UP+Home but that does nothing. When I tried to go into download mode by holding Power+VOL DOWN+Home, it works fine.
Symptom:
Phone boot loops displaying only the very first Samsung screen with Galaxy s6 edge (no samsung boot animation). Once this very first logo screen comes on, the screen goes black and loops again. Even if I plug the OEM Samsung USB charging cable, screen does not show the battery charging screen, just the same Samsung Galaxy s6 edge screen.
I have already tried the following:
1. Flash stock rom using ODIN, flashed successfully, still boot loop
2. Holding Power+Vol DOWN to reset, still boot loop
3. Flash stock rom using ODIN again, flashed successfully, still boot loop
4. Let battery drain, waited 3 hours for screen to boot loop and battery died, plugged back USB charging cable back, still boot loop
5. Flick the power button many times to loosen any dirt, still boot loop
6. Hold the power button for 1 minute, 2 minute, and 3 minute, still boot loop
Please help, any advice very appreciated!
Click to expand...
Click to collapse
Hold the button combo pwr, vol down and home as if you want to go into download mode, but try to time it that immediately before the download mode screen comes on, use the Vol up, home and pwr combo and keep holding it down, till it goes into recovery. You have to time it so that right begore the download screen lites up you shift to the recovery mode 3 button combo and hold it till it goes into recovery. This works for me and how I do it all the time whether using stock recovery or TWRP.
Docmjldds said:
Hold the button combo pwr, vol down and home as if you want to go into download mode, but try to time it that immediately before the download mode screen comes on, use the Vol up, home and pwr combo and keep holding it down, till it goes into recovery. You have to time it so that right begore the download screen lites up you shift to the recovery mode 3 button combo and hold it till it goes into recovery. This works for me and how I do it all the time whether using stock recovery or TWRP.
Click to expand...
Click to collapse
Thanks for your suggestion Docmjldds but that didn't work either. I think I timed it within 0.5 second of the download mode screen. I always tried cancelling out of download mode and quickly holding the combo vol up, home, and pwr immediately after it and it that did not work either.
nyknight77 said:
Thanks for your suggestion Docmjldds but that didn't work either. I think I timed it within 0.5 second of the download mode screen. I always tried cancelling out of download mode and quickly holding the combo vol up, home, and pwr immediately after it and it that did not work either.
Click to expand...
Click to collapse
What version Odin?
What version stock ROM?
What version Recovery?
Have you tried to simply install latest TWRP 3.1.0 "twrp-3.1.0-0-zeroltetmo.img.tar"
nyknight77 said:
I have a SM-G925T and it started boot loop today. I tried to get into recovery mode by holding Power+VOL UP+Home but that does nothing. When I tried to go into download mode by holding Power+VOL DOWN+Home, it works fine.
Symptom:
Phone boot loops displaying only the very first Samsung screen with Galaxy s6 edge (no samsung boot animation). Once this very first logo screen comes on, the screen goes black and loops again. Even if I plug the OEM Samsung USB charging cable, screen does not show the battery charging screen, just the same Samsung Galaxy s6 edge screen.
I have already tried the following:
1. Flash stock rom using ODIN, flashed successfully, still boot loop
2. Holding Power+Vol DOWN to reset, still boot loop
3. Flash stock rom using ODIN again, flashed successfully, still boot loop
4. Let battery drain, waited 3 hours for screen to boot loop and battery died, plugged back USB charging cable back, still boot loop
5. Flick the power button many times to loosen any dirt, still boot loop
6. Hold the power button for 1 minute, 2 minute, and 3 minute, still boot loop
Please help, any advice very appreciated!
Click to expand...
Click to collapse
I have the solution for you my friend. Flash TWRP using oding (in download mode), then from TWRP install or flash this rom(for this you need to download the rom, connect your phone to the pc and while you have TWRP open in your screen put the file of the rom in the phone)
Rom right here:
https://forum.xda-developers.com/ga...ied-development/noble-nougat-rom-1-0-t3565293
This works because this rom comes with its own bootloader and kernel.
maxter55 said:
I have the solution for you my friend. Flash TWRP using oding (in download mode), then from TWRP install or flash this rom(for this you need to download the rom, connect your phone to the pc and while you have TWRP open in your screen put the file of the rom in the phone)
Rom right here:
https://forum.xda-developers.com/ga...ied-development/noble-nougat-rom-1-0-t3565293
This works because this rom comes with its own bootloader and kernel.
Click to expand...
Click to collapse
Really appreciate your help here. Would flashing TWRP with odin trip knox? I'm afraid to flash anything not stock rom related.
Docmjldds said:
What version Odin?
What version stock ROM?
What version Recovery?
Have you tried to simply install latest TWRP 3.1.0 "twrp-3.1.0-0-zeroltetmo.img.tar"
Click to expand...
Click to collapse
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
nyknight77 said:
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
Click to expand...
Click to collapse
Flashing TWRP WILL trip knox. So, if that's a concern to you, then not much more I can tell you about that. BUT.....3.12.3 is latest ODIN. I would use THAT. Then try flashing complete stock firmware from download mode. QC2 being the last. Here is latest ODIN I attached.
nyknight77 said:
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
Click to expand...
Click to collapse
PS: Have you tried turning phone off. Then power on and then immediately hold the vol up home pwr buttons combo. That should also get you into recovery mode. But that said, I would still try my last.
---------- Post added at 08:08 PM ---------- Previous post was at 08:04 PM ----------
maxter55 said:
I have the solution for you my friend. Flash TWRP using oding (in download mode), then from TWRP install or flash this rom(for this you need to download the rom, connect your phone to the pc and while you have TWRP open in your screen put the file of the rom in the phone)
Rom right here:
https://forum.xda-developers.com/ga...ied-development/noble-nougat-rom-1-0-t3565293
This works because this rom comes with its own bootloader and kernel.
Click to expand...
Click to collapse
He wants to keep stock. NOT a good idea
Docmjldds said:
Flashing TWRP WILL trip knox. So, if that's a concern to you, then not much more I can tell you about that. BUT.....3.12.3 is latest ODIN. I would use THAT. Then try flashing complete stock firmware from download mode. QC2 being the last. Here is latest ODIN I attached.
Click to expand...
Click to collapse
I used the ODIN 3.12.3 that you posted and flashed QC2 again (Passed/succeeded). Still boot loops.
I can easily get into download mode but not recovery mode. I don't know of a way to power off, just reset by holding power button or (power button and vol down). I just realized how ridiculous this sounds but is there any way to actually power off the phone without loading android and holding power button, and selecting power off? As far as I know, there's only soft reset or hard reset.
I'm pretty sure my hardware buttons work fine since I need to hold power button, vol down, and home at the same time to enter download mode perfectly. Then I have to press volume up button to enter download mode. So all the buttons that's needed to enter recovery mode (power, volume down, and home) works.
Wonder if bad battery can be be the cause? I don't get any charging indicator (screen with battery animation) when I plug phone to USB charger. Seems to be able to hold a charge but not that long, no way for me to check battery percentage though.
nyknight77 said:
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
Click to expand...
Click to collapse
It's your only option right now. I was where you were and I have the same phone 925T. I flashed the rom I told you about then I flashed the stock nougat rom that just came out 2 days ago. I'm running the stock nougat and I'm happy at the moment. Battery and performance are great. I tried flashing all of the stock roms using ODIN and nothing would work but flashing that rom I linked you before worked and then I was able to go back to stock. Trip Knox sure but you will have a working phone again.
The reason why I went back to stock is because I need WIFI calling.
---------- Post added at 05:56 AM ---------- Previous post was at 05:46 AM ----------
nyknight77 said:
I used the ODIN 3.12.3 that you posted and flashed QC2 again (Passed/succeeded). Still boot loops.
I can easily get into download mode but not recovery mode. I don't know of a way to power off, just reset by holding power button or (power button and vol down). I just realized how ridiculous this sounds but is there any way to actually power off the phone without loading android and holding power button, and selecting power off? As far as I know, there's only soft reset or hard reset.
I'm pretty sure my hardware buttons work fine since I need to hold power button, vol down, and home at the same time to enter download mode perfectly. Then I have to press volume up button to enter download mode. So all the buttons that's needed to enter recovery mode (power, volume down, and home) works.
Wonder if bad battery can be be the cause? I don't get any charging indicator (screen with battery animation) when I plug phone to USB charger. Seems to be able to hold a charge but not that long, no way for me to check battery percentage though.
Click to expand...
Click to collapse
Before doing all this, if you don't want to void your warranty.
1-Download the stock NOUGAT, flash it using odin and then if it lets you go in recovery mode, factory reset your phone then try to boot. Give it 5-10 minutes to make sure it doesn't actually boot. I know the first boot takes a while so you will be stuck at the t-mobile logo. If after 10 minutes doesn't go on then try number 2.
2-Having the phone in download mode use the software smart switch.
Follow the instructions in this video.
https://www.youtube.com/watch?v=Lwz6bF-aqk4&t=30s
If none of that works, either use your warranty or
Follow the instructions to install TWRP.
https://forum.xda-developers.com/ga...ecovery-official-twrp-galaxy-s6-edge-t3354508
maxter55 said:
It's your only option right now. I was where you were and I have the same phone 925T. I flashed the rom I told you about then I flashed the stock nougat rom that just came out 2 days ago. I'm running the stock nougat and I'm happy at the moment. Battery and performance are great. I tried flashing all of the stock roms using ODIN and nothing would work but flashing that rom I linked you before worked and then I was able to go back to stock. Trip Knox sure but you will have a working phone again.
The reason why I went back to stock is because I need WIFI calling.
---------- Post added at 05:56 AM ---------- Previous post was at 05:46 AM ----------
Before doing all this, if you don't want to void your warranty.
1-Download the stock NOUGAT, flash it using odin and then if it lets you go in recovery mode, factory reset your phone then try to boot. Give it 5-10 minutes to make sure it doesn't actually boot. I know the first boot takes a while so you will be stuck at the t-mobile logo. If after 10 minutes doesn't go on then try number 2.
2-Having the phone in download mode use the software smart switch.
Follow the instructions in this video.
https://www.youtube.com/watch?v=Lwz6bF-aqk4&t=30s
If none of that works, either use your warranty or
Follow the instructions to install TWRP.
https://forum.xda-developers.com/ga...ecovery-official-twrp-galaxy-s6-edge-t3354508
Click to expand...
Click to collapse
So I just flashed the latest nougat stock firmware with ODIN. Flashed passed/succeeded. No difference, still boot loop Still cannot get into recovery mode but can get into download mode fine like before.
My phone is out of warranty so I'm just gonna buy a replacement battery off ebay and see if that makes any difference. Hope someone has other ideas. I'll use TWRP as a last resort. Maybe that will work but I don't know how not being able to get into stock recovery would be fixed by installing TWRP custom recovery. I suspect I would not be able to get into TWRP recovery either.
nyknight77 said:
So I just flashed the latest nougat stock firmware with ODIN. Flashed passed/succeeded. No difference, still boot loop Still cannot get into recovery mode but can get into download mode fine like before.
My phone is out of warranty so I'm just gonna buy a replacement battery off ebay and see if that makes any difference. Hope someone has other ideas. I'll use TWRP as a last resort. Maybe that will work but I don't know how not being able to get into stock recovery would be fixed by installing TWRP custom recovery. I suspect I would not be able to get into TWRP recovery either.
Click to expand...
Click to collapse
Why are you so concerned about tripping knox, since you are out of warranty anyways. And BTW it's a myth that a rooted phone loses warranty. I have had plenty of my phones covered under warranty and they were ALL rooted. With TWRP installed, you can use the advanced wipe actions to basically factory reset and load either Nougat or MM stock. I am rooted using stock just released Android 7 for TMobile firmware. Odin Firmware. Odin TWRP. Then install anything you like. Yes...knox tripped. Yes, you will lose Samsung Pay. For me not a big deal. Otherwise just fine. The warranty comany has to prove that your act of rooting caused the issue the phone has. Samsung will tell people that phone warranty is voind if rooted. But it's ONLY a line they are told to state. Again, I have used Samsung warranty direct...NOT TMobile and obtained free warranty service and my phones were rooted.
Docmjldds said:
Why are you so concerned about tripping knox, since you are out of warranty anyways. And BTW it's a myth that a rooted phone loses warranty. I have had plenty of my phones covered under warranty and they were ALL rooted. With TWRP installed, you can use the advanced wipe actions to basically factory reset and load either Nougat or MM stock. I am rooted using stock just released Android 7 for TMobile firmware. Odin Firmware. Odin TWRP. Then install anything you like. Yes...knox tripped. Yes, you will lose Samsung Pay. For me not a big deal. Otherwise just fine. The warranty comany has to prove that your act of rooting caused the issue the phone has. Samsung will tell people that phone warranty is voind if rooted. But it's ONLY a line they are told to state. Again, I have used Samsung warranty direct...NOT TMobile and obtained free warranty service and my phones were rooted.
Click to expand...
Click to collapse
The biggest concern about tripping knox for me is that I lose Samsung Pay. It's actually the most useful thing I have on the phone. I can do pretty much every thing on my old phones that I need but it doesn't have samsung pay. I understand it's useless for most people, but for me it's the most important feature.
Do you think i would still have the same problem getting into recovery even if I flashed TWRP? Right now I can't even load stock recovery.
nyknight77 said:
The biggest concern about tripping knox for me is that I lose Samsung Pay. It's actually the most useful thing I have on the phone. I can do pretty much every thing on my old phones that I need but it doesn't have samsung pay. I understand it's useless for most people, but for me it's the most important feature.
Do you think I would still have the same problem getting into recovery even if I flashed TWRP? Right now I can't even load stock recovery.
Click to expand...
Click to collapse
I really have no idea why you are having this issue. The one time my phone was so screwed up was I could ONLY fix by doing a complete factory reset including internal memory and that was via TWRP. Installing TWRP WILL kill Knox, therefore no more Samsung Pay...period. Have you tried smart switch out of curiosity?
Docmjldds said:
I really have no idea why you are having this issue. The one time my phone was so screwed up was I could ONLY fix by doing a complete factory reset including internal memory and that was via TWRP. Installing TWRP WILL kill Knox, therefore no more Samsung Pay...period. Have you tried smart switch out of curiosity?
Click to expand...
Click to collapse
I think my problem is worst than what you had before because I cannot even get into recovery mode not just a normal boot loop. This issue is boot loop and not being able to get into recovery mode.
I have not used smart switch yet. I was going to do an emergency software recovery but that would basically just wipe all internal memory and flash the stock rom. I thought I could save some of my data by just flashing stock rom with ODIN, which flashed perfectly every time but still boot loops.
nyknight77 said:
I think my problem is worst than what you had before because I cannot even get into recovery mode not just a normal boot loop. This issue is boot loop and not being able to get into recovery mode.
I have not used smart switch yet. I was going to do an emergency software recovery but that would basically just wipe all internal memory and flash the stock rom. I thought I could save some of my data by just flashing stock rom with ODIN, which flashed perfectly every time but still boot loops.
Click to expand...
Click to collapse
The only thing I can think of is that your setup is so corrupted you basically have no choice here. It's kind of the old adage about knowing it's important to occasionally back up the internal data, but just never get to it. I'm kind of paranoid to every now and then make sure I have copies of stuff around. I know it's zero solace for you, but without getting into recovery mode, there is no way to get to the Internal stuff that I know of. I'm assuming you never used smartswitch to backup or just use a computer to copy paste Internal stuff to a folder for saving.
HMMMM...Password:
ZiDroid.com
Try this stock Recovery. I found a post I made almost two years ago with a link to this file. Use the password to open the file and try ODIN again
nyknight77 said:
I think my problem is worst than what you had before because I cannot even get into recovery mode not just a normal boot loop. This issue is boot loop and not being able to get into recovery mode.
I have not used smart switch yet. I was going to do an emergency software recovery but that would basically just wipe all internal memory and flash the stock rom. I thought I could save some of my data by just flashing stock rom with ODIN, which flashed perfectly every time but still boot loops.
Click to expand...
Click to collapse
I realize I'm kinda grasping at straws here short of a complete nuke of your setup....but sometimes you have to bite the bullet so to speak
Docmjldds said:
I realize I'm kinda grasping at straws here short of a complete nuke of your setup....but sometimes you have to bite the bullet so to speak
Click to expand...
Click to collapse
Really appreciate your help. I'm starting to think more that it's a bad battery now. Hope that's just it instead of the main board.
I left phone on charge for a few hours (constantly boot looping the whole time). I'm able to power off the phone by holding Power button and Volume down for 10 seconds. Screen is completely off, no boot looping.
Step1: When try to simply turn phone on by holding power button for three seconds, the first samsung galaxy s6 edge logo screen pops up but then goes away and phone looks to be off. Like it's trying to get power from the battery but can't.
Step2: If I keep holding the power button, that first logo screen would turn on and off as if it's a boot loop. If I let go, then phone is off again.
Step3: If I go into download mode and select Cancel (restart phone), it goes into boot loop with only first logo screen again. It loops until I hard reset by holding power button and volume down again for 10 seconds. Then phone is off. Same thing repeats if I go back to Step1 again.
Lineage /Oreo was installed thru TWRP 3.xxx, running fine but unhappy , no Viper4Android , so I installed it as a module on Magisk,
after installing the driver, was ask to reboot as directed, but went into bootloop , stuck on a boot loop " Set Warranty Bit : kernel " top left corner and Samsung Galaxy Note 3 on screen ; I tried Vol Up +Home+ power combo and all other combi I could think but no luck , Odin wont recognize my phone, tried Samsung 300k tool with no luck, I fell like a newbie after using so many ROMs on all of my devices, I google how to get back to download mode but no luck, I need help to make my Samsung note 3 work again, PLEASE. THANKS.
Hi,
I have same phone but I'm running Resurrection Remix 6 which is based on LineageOS 15.1 and I'm able to use the Viper module through Magisk 16.3 without any problems. No bootloops, no nothing.
I never would have guessed that a sound mod could brick the device to the point that the buttons no longer function. Hopefully other users will chime in and help you fix it.
Best of luck.
EDIT: Try taking the battery out to force it to shut down and then try the recovery/download mode technique again. Sometimes, it'll end up in a bootloop and the buttons will be become unresponsive. I know it may seem a bit strange, but that scenario is entirely possible given the age of the device.
Sent from my SM-N900T using Tapatalk
AndroidHacker99 said:
Hi,
I have same phone but I'm running Resurrection Remix 6 which is based on LineageOS 15.1 and I'm able to use the Viper module through Magisk 16.3 without any problems. No bootloops, no nothing.
I never would have guessed that a sound mod could brick the device to the point that the buttons no longer function. Hopefully other users will chime in and help you fix it.
Best of luck.
EDIT: Try taking the battery out to force it to shut down and then try the recovery/download mode technique again. Sometimes, it'll end up in a bootloop and the buttons will be become unresponsive. I know it may seem a bit strange, but that scenario is entirely possible given the age of the device.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I did tried RR 6, but I had trouble with 1.) power Button menu option, screenshot/screen record , 2.) Viper4Android , a must have on all my Android devices, and last 3.) latest Android version , if I dont get the first 2 obsession , that's when I switched to a different ROM (LOL), but seriously , all I need is to get HELP to get back to download mode again, Vol Up + Home + Power, did that for 2 days approaching the 3rd day (LOL). HEEEELLLLLPPPPPPP.
Isn't download mode volume down + home + power?
Aykee said:
I did tried RR 6, but I had trouble with 1.) power Button menu option, screenshot/screen record , 2.) Viper4Android , a must have on all my Android devices, and last 3.) latest Android version , if I dont get the first 2 obsession , that's when I switched to a different ROM (LOL), but seriously , all I need is to get HELP to get back to download mode again, Vol Up + Home + Power, did that for 2 days approaching the 3rd day (LOL). HEEEELLLLLPPPPPPP.
Click to expand...
Click to collapse
You need to take the battery out to force it out of the bootloop then push volume DOWN, home & power.
Sent from my SM-N900T using Tapatalk
audit13 said:
Isn't download mode volume down + home + power?
Click to expand...
Click to collapse
Sorry, I mean Vol down but no luck.
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Aykee said:
Sorry, I mean Vol down but no luck.
Click to expand...
Click to collapse
Can you also not boot into TWRP by holding Home+PWR+Volume up? If so you can boot to Download Mode from there.
Sent from my toaster using Magic
audit13 said:
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Click to expand...
Click to collapse
Sounds like a good idea, ordering on amazon..thanks
ludeawakening said:
Can you also not boot into TWRP by holding Home+PWR+Volume up? If so you can boot to Download Mode from there.
Sent from my toaster using Magic
Click to expand...
Click to collapse
I did all button combination, cant get into download nor recovery mode , am not sure if buttons are wack but it feel responsive and clicky but thanks anyway am going for the USB jig, I never had one.
audit13 said:
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Click to expand...
Click to collapse
I got the USB jig but nothing happen after plugging in, any other idea please?
Removed the battery, inserted the jig, and then inserted a charged battery?
audit13 said:
Removed the battery, inserted the jig, and then inserted a charged battery?
Click to expand...
Click to collapse
The jig that I bought didnt do anything so I make my own, I can go to download mode now, installed this ROM/firmware N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar.md5 succesfully but wont go pass beyond the tmobile logo, tried a few more firmware and lately this N900TUVUFOL1 and also , am stuck to Tmobile logo, anybody knows which firmware would likely bring my note 3 back to life, thanks in advance.:
Try this:
Uncheck everything in Odin except f reset time. Flash the latest ROM again. When you see the word "reset" in the status WIndow, remove the USB cable from the phone, remove the battery, replace battery, boot into recovery mode using buttons, factory wipe, and reboot.
audit13 said:
Try this:
Uncheck everything in Odin except f reset time. Flash the latest ROM again. When you see the word "reset" in the status WIndow, remove the USB cable from the phone, remove the battery, replace battery, boot into recovery mode using buttons, factory wipe, and reboot.
Click to expand...
Click to collapse
After "reset" status, I did remove cable, remove batt and boot up to recovery, the blue light lit up as if its going to recovery mode , android logo showed up but phone boot up to normal but not pass beyond tmobile logo, so I did CF-root via odin , but still not booting to recovery.
Try flashing the entire ROM in AP.
audit13 said:
Try flashing the entire ROM in AP.
Click to expand...
Click to collapse
Thanks Audit13,
I manage to restore my Note 3 to TMobile Android 5 using repair firmware , it looks like I wipe out the partition ,My phone runs like new, am just wondering why I cant go to Download mode with button combinations of Volume -/Home/power , tried to install twrp via Odin, it says PASS but Vol +/Home/Power wont lead me to bootloader, did tried CWM , it will boot up but before I could start using it, it will reboot to normal and I could not go back to bootloader with button combo Vol+/Home/Power........HELP...
Download mode is volume down+home+power.
To flash TWRP with Odin, try this:
Open Odin and only check f reset time. Flash TWRP. When you see the word reset in the Odin status window, remove the USB cable from the phone, remove the battery, replace battery, press home + volume up + power.
N900TUVUFOB6_N900TTMBFOB6_TMB and N900 PIT - are the files am using after screwing up my partition( I dont know how I did that ), this Note 3 is running like a hot knife on a butter BUT the only bug I notice is Volume Up + Home + Power ( recovery) NOR Volume Down + Home + Power (download ) does not work, I can only go to download mode using a USB JIG and no other way. I can flash TWRP via Odin with Auto-reboot not ticked , so I could remove cable, battery , hoping to get me to recovery mode but I couldnt. Did I miss a step?I need help.