[Q] Huawei E169 - 3G dongle - G Pad 8.3 Q&A, Help & Troubleshooting

Hi to all,
I tried to make work this dongle, but with no success.
First i debranded the key (it was branded H3G, italian operator), i rooted the GPad and installed PPP Widget.
When I insert the dongle, PPP Widget says to me that he has no driver. So, where I can find these drivers?
I searched on the internet but it's very difficult to find something about that.
Thank you!

Nickname786 said:
Hi to all,
I tried to make work this dongle, but with no success.
First i debranded the key (it was branded H3G, italian operator), i rooted the GPad and installed PPP Widget.
When I insert the dongle, PPP Widget says to me that he has no driver. So, where I can find these drivers?
I searched on the internet but it's very difficult to find something about that.
Thank you!
Click to expand...
Click to collapse
Sorry you are out of luck. Kernel injection of drivers was dropped after 4.0.4. So unless your kernel supports it...

nightanole said:
Sorry you are out of luck. Kernel injection of drivers was dropped after 4.0.4. So unless your kernel supports it...
Click to expand...
Click to collapse
Yeah, I red about to flash custom kernel with drivers implemented, but can't find those drivers and kernels.
Hoped to find them here!
With Samsung tablets it's possible, even with 4.3. Maybe there is a solution for GPad too.

So... No solutions?

Related

Official Update: V10g

Over on LG-eXpo.com one of our newest members, techi, found an update for the eXpo. Here is the link for those interested.
http://www.lg.com/us/mobile-phones/mobile-support/mobile-lg-gw820-software-update.jsp
thanks very much for posting this. this fixed several annoying issues for me, and improved a2dp audio quality.
Wes
legitttttt!!
Wow I just tried this rom and it is way better then any other rom out for this phone right now. Its fast, has no bugs and gets the job done. LG really did a great job on this rom.
Tried this update last night and it bricked my phone. Called ATT & LG customer service and I now have to send my phone in to LG for repair/replacement. Half way through the update I ran into an error and it asked that I restart (3 times) after which it said contact customer service and exit. Now my computer won't recognize my phone when plugged in thru usb and so I can't try to restart the update. I believe the phone was wiped clean. Anyway, I guess I'll just send it in and let LG figure it out.
Can I use this with the Telus IQ?
tks456 said:
Can I use this with the Telus IQ?
Click to expand...
Click to collapse
Yes, i just flashed my Telus IQ with this rom. It works great, but you'll have to setup your data connection since it is pre-set for AT&T
For those who stuck at 25%, while stuck plug out the cable and quickly replug-in, that's all.
djuroganovic said:
Yes, i just flashed my Telus IQ with this rom. It works great, but you'll have to setup your data connection since it is pre-set for AT&T
Click to expand...
Click to collapse
How is it done ??
Do I still get French language in this rom ?
Thank you.
Anybody home ?????
lg-expo.com/lg-expo-rom-development/how-to-flash-your-expoiq
Thanks. I know how to flash it but how do I set things for TELUS CANADA because V10G is for EXPO and I have LG IQ GW825 from Telus.
Reverting to the official V10g has fixed every problem I met with Dragonstorm 23139. My expo is now running perfectly well, guarantee.
Before this I was convinced that Dark's 23139 is my final resort, and I would nearly buy a new Android phone by now.
Mistral150 said:
How is it done ??
Do I still get French language in this rom ?
Thank you.
Click to expand...
Click to collapse
In connection settings page, go to advance tab. Click new (upper one). It opens up a new windows. After typing name of connection, go to modem tab and type in APN (e.g. for 3 mobile is three.co.uk).

RadioComm v11.11.11

Here we have it,
RadioComm support tool, used for Motorola Handsets.
I found the link somewhere on the net
This is the latest edition i have found so far,
Good Luck
http://www.mediafire.com/file/62wwr6qw68qvrb6/RadioComm_v11.11.11_Install.msi
Like the availability, Bump the 'Thanks' button. ;]
Guide on how to actually use Radiocomm 11.11.11?
I've only seen screen shots for it but it has a lot of options and looks like a really complex program. All I need it for is to simply flash SPRecovery.spf on my phone when I root it. So could anyone link me to a Radiocomm flashing guide or at least tell me what I need and what to do and if I need to do it before or after rooting? Thanks and I've rooted a lot but never changed recoveries, all the one click root apps give me recoveries that I hate such as RA-eris V1.6.2 because they are a pain. I'm manually rooting my Eris [I've already done manual rooting before] and just choose my own recovery and SPRecovery has gotten a lot more kudos than RA-eris v1.6.2 [Amona Ra?] and ClockworkMod. If anyoen also knows of any other recovieres they like better than please let me know, but for now just a good how to guide for flashing with Radiocomm. Thanks a lot in advance guys! =]
Hi There,
I apologize for not having any links off hand, (though i may be able to update int he future).
I know i have ran across a few guides for radiocomm on the internet... Try using Google.com, and keep an eye out for .pdf files..
I am sure you can tinker around in the menu's also... It is a very robust program...
And, just curious... Did you mean to say .SBF file? instead of .spf?
Good Luck
Here You Go,
I found an older manual for Radiocomm... Idk where i found it, or how helpful it may be... but it's a step in understanding...
Good Luck
yep this tool is interresting...
Here is version 11.12.2
Thanks for posting these files but I can't get them to work. They will not find any of my phones. I have the motorola drivers installed and my puter finds the phone but the radiocomm program won't connect, it stays red. I am running windows 7 with motorola 5.5 drivers, net framework 4 is installed. I tried it in compatability mode, the phones are set to pc mode. my phones are a droid 2 global, and two are a bionic. Can someone please help me out?? Thanks!
For all to know.
The low level tools are written for use with WinXP or lower.
Use with a newer Windows in XP-Mode at your own risk.
That's why to keep an old XP machine (or Win2K) on hand.
Good info everyone!!
Here is a backup link to the version epsylon updated us with.. :]
http://www.4shared.com/archive/0uhGKq5S/RadioComm_v11122_Installmsi.html
Sent from my SGH-T959 using xda app-developers app
anybody radio comm the newest version willing to donate...............thank you
11.12.2 Version
joe zack said:
anybody radio comm the newest version willing to donate...............thank you
Click to expand...
Click to collapse
Here:
https://dl.dropbox.com/u/7632904/RadioComm_v11.12.2_Install.zip
[https://dl.dropbox.com/u/7632904/RadioComm_v11.12.2_Install.zip[/QUOTE]
thank you for the post ,,,,,,,,,,,,sorry i meant leatest version like v11.12.3
but anyway thank you again for posting
lwolf7 said:
For all to know.
The low level tools are written for use with WinXP or lower.
Use with a newer Windows in XP-Mode at your own risk.
That's why to keep an old XP machine (or Win2K) on hand.
Click to expand...
Click to collapse
Well technically the most important thing with these kind of programs is the bits. Most of them are written for 32bit OS.
I'm using win8 32bit and all of my tools work fine. Just used Radiocomm today and yesterday to read some info from some older motorolas.
Granted not *everything* will work. I had to use Blackberry Desktop Manager 6.0 or newer to get it work right.
5.0.1 or older would BSOD on me when I tried to do too much with the RIM Virtual Serial Port.
How to use this program to enable the FM radio on my Motorola phone? Someone claims to have done this using this program but he's not responding to requests for more information. I've installed the program but don't want to brick my phone. In the past I've messed with other programs like QPST and QXDM to enable additional bands so I'm not an entire newbie. Thank you.
Here is a link for using radio comm on droid,https://forum.xda-developers.com/showthr
TimelesslyPrecise said:
Hi There,
I apologize for not having any links off hand, (though i may be able to update int he future).
I know i have ran across a few guides for radiocomm on the internet... Try using Google.com, and keep an eye out for .pdf files..
I am sure you can tinker around in the menu's also... It is a very robust program...
And, just curious... Did you mean to say .SBF file? instead of .spf?
Good Luck
Click to expand...
Click to collapse
,,,https://forum.xda-developers.com/showthread.php?t=2166542

sTune doesn't find device

Hi everyone,
sTune doesn't recognize my phone (s8500, bada 2.0, S8500XXKL6) and I have no idea what to do.
I'm sure all the drivers are installed but still it doesn't find my device no matter what I do.
Anyone have any idea what I should do?
Thanks in advance.
use Stune 1.06
http://www.handy-faq.de/forum/bada_forum/145607-stunes_stefandevs_samsung_wave.html
Stune 1.07 does not work with bada 2.0
Tried it, doesn't work as well..
s8500, bada 2.0
Click to expand...
Click to collapse
Please post exact Firmwareversion...
Enter *#1234# in your handset...
Best Regards
S8500xxkl6, though it's modified in Hebrew language.
Kies work ?
Maybe some mistake happens in Mod...
Kies + sTune use same Com Port...
Best Regards
Then how did he flash his firmware originally
Please double check on your device drivers
Maybe try to connect to linux if you got any distro installed
Best Regards
You can use TkFileExplorer...I think its better than Stune..
Drivers fully installed and kies works perfectly.
Tried on windows XP, bur it still doesnt work..
Thanks in advance
sTune works before?
I mean you have sTune expereince?
I am pretty sure that both Versions connects to all bada 2.0 Firmware...
So you can see attached device, IMEI etc. with sTune...
But for fully working you need 1.06 to access folders in every known bada 2.0 Firmware...
You can also try TkFileExplorer_2.4.exe
But if Kies work... then sTune should be also run.
Btw. I have only XP 32 and you?
Best Regards
This problem happened for me too
but i use an other computer and it working (same version )
Mr_W_o_l_f said:
This problem happened for me too
but i use an other computer and it working (same version )
Click to expand...
Click to collapse
Thanks, works on different computer with XP!
Thanks a lot everyone, problem solved.
Do you have Kies in Auto blabla Background?
Maybe Comp Port is then blocked/reserved by Kies...
Anyway, you find one solution.
Best Regards
adfree said:
Do you have Kies in Auto blabla Background?
Maybe Comp Port is then blocked/reserved by Kies...
Anyway, you find one solution.
Best Regards
Click to expand...
Click to collapse
Tried everything, perheps the drivers aren't installed correctly.
Thanks a lot any way!

[CLOSED][Q&A] Galaxy W Questions and Answers - Ask All Questions Here!

Hi guys,
As there is no Q&A section for the Galaxy W, please feel free to use this sticky to ask your questions, or answer questions posted here.
Please try and keep this thread friendly, helpful and on-topic. Feel free to report anything out of place, and I will clean it up for you.
Cheers! :good:
[Q] [Clock Always Stuck Up]
ok ill start and i think it would be clearer if we put a thread like title on our post
why does my clock always stuck? there are times(honestly most of it) wherein when i wake the phone its stuck on the last time i locked it, i already tried many clock widgets such as the Sensus 4.0, Beautiful Widgets, and many more, still it stucks up. can somebody tell me what the real problem is? i read from other threads that when they use 3rd party clock it doesn't stuck anymore and works well but for me i still stays the same whatever clock i use
[Q] [What do you want from a ROM?]
As the question says. What do users like YOU want from a ROM?
mkcy said:
[Q] [What do you want from a ROM?]
As the question says. What do users like YOU want from a ROM?
Click to expand...
Click to collapse
i think most of users like stable rom, battery drained not so fast and no bugs.
for me, i like kezra's, cow's and tux rom (no oc) those are stable,battery didnt drained fast and fast enough for me..i think oc and mods will make our battery drained so fast,,
regards,
Bluetooth
Hi
how can I change the default directory for files that recieved via bluetooth from sd card to external_sd card
hello .. i got a question to ask from this commnity and to the dev too
im currently using F.a.w rom which is a godly like smoothness and such
but i have a problem .. when i charge my phone my battery heat up , up to 40*
and for the long run , now my simcard cant read the simcard anymore ... is it possible that the heating from the phone to damage my simcard slot ?
Im sorry for my badly english
I can't root my phone??
Hi there,
I've been searching your nice forum, and tried a few methods for rooting my Wonder.
When I try using the recovery mode, I can't get the zip. file on my phone and if I unzip it on my SD card, I can't see "setup" in recovery mode:-( What am I doing wrong?? I also tried super one click, but that doesn't work either...
I'm hoping someone could help me...
Greetz and tnx!
Samsung GT-I8150
Android-versie 2.3.6
Baseband-versie I8150XXKL3
Kernelversie [email protected]#3
Buildnumber GINGERBREAD.XXLA2
Can u help me?
My Galaxy W's USB Debugging mode won't work..
I've already checked the sign at Application => Development => USB Debugging,
but still won't work..
What make this happened?
The KieS won't recognize it too..
Can u guys help me here?
Somebody please..
Thanks a lot..
galaxy w vs iphone (wifi)
these 2 phone can detect the available free wifi..:good:
these 2 phone can connect into this available free wifi..:good:
but
iphone has the network connection,, while
galaxy w cannot access the internet:crying:..
is there something wrong with the unit guys? (galaxy w)
thanks for this thread...
jhun rey said:
these 2 phone can detect the available free wifi..:good:
these 2 phone can connect into this available free wifi..:good:
but
iphone has the network connection,, while
galaxy w cannot access the internet:crying:..
is there something wrong with the unit guys? (galaxy w)
thanks for this thread...
Click to expand...
Click to collapse
You should post more information...
Is your Galaxy W able to see and connect to the network?
Hi fellow SGWers, I wonder does anyone know of a "Diagnostic" app for diagnosing errors/issues/random reboots on an android phone?
I've recently (in the last week or so) started getting random (and not so random) reboots, I could try and diagnose it myself, ie. uninstall apps that seem to make the phone reboot, etc, but I'm too lazy/impatient and would like to use an app that I can possibly set to monitor activity on the phone for a certain length of time.
Heavy battery use isn't an issue at the moment as I'm laid up at home with a stomach bug, so can charge it whenever it needs it.
Thanks in advance for any and all help!
Edit: For reference, I'm running CM9 Alpha 4
CTBadger.
wifi connect
[.::MDT::.] said:
You should post more information...
Is your Galaxy W able to see and connect to the network?
Click to expand...
Click to collapse
i can connect both phone and use internet in some areas..
but it happens twice in def. area that both can connect to a wifi but its only the iphone that can connect to internet..
i change nothing on any settings.. just the on/off of wifi connectivity..
jhun rey said:
i can connect both phone and use internet in some areas..
but it happens twice in def. area that both can connect to a wifi but its only the iphone that can connect to internet..
i change nothing on any settings.. just the on/off of wifi connectivity..
Click to expand...
Click to collapse
Don't know... that's weird.
You should check the settings on the wifi router then (maybe there's a MAC filter and only iPhone is allowed to have internet connection?)...
wifi connect
[.::MDT::.] said:
Don't know... that's weird.
You should check the settings on the wifi router then (maybe there's a MAC filter and only iPhone is allowed to have internet connection?)...
Click to expand...
Click to collapse
That's also what i'm thinking..
guys,,can we do this??
http://forum.xda-developers.com/showthread.php?t=1748588
and maybe some of our dev can take a look of this too..
http://forum.xda-developers.com/showthread.php?t=1762641
I wanna ask,
is galaxy w need link2sd installed?
what setting that would be good if installing link2sd?
ZT-180 adhoc switcher and wifi problem
hello guys, i accidently install the zt-180 adhoc switcher in my galaxy w, and switcing it on.after several moment later, i cant use my wifi-it can only on for several seconds and automatically off, while it is on, it cant detect any wireless network nearby.can anyone help me with this?already uninstall the application but the problem remain
Kernel
Hey guys, how are you doing?
I have a question (is about development, but I can't post anything in development section yet).
I'm modding a stock ROM for my i8150b. I'm doing this because I couldn't found any custom ROM with pt_br support since most custom are based in EUR ROMs, and i8150 have this "special edition" fo us brazilians.
My problem is, can I use a custom kernel in it without losing my language support?
And just to make it clear to me, RTL is the shortenning for something about language?
thanks.
Questions
Guys,
Can some people tell me if we can do this
http://forum.xda-developers.com/showthread.php?t=1088474&page=12
thanks
how to factory reset and restore using titanium
who knows how to restore back application data using titanium backup after doing factory reset using cwm mode in android phone?i think it will delete the titanium backup app and the root.should i backup using titanium-->factory reset using cwm-->root again my phone-->install back titanum-->and restore?...an i already backed up my app data in my external sd.should it be removed 1st b4 doing the factory reset?

Firmware for Terios t3/t3+ gamepad.

Hi. Is there firmware for this gamepad anywhere to download? I tried firmwares from similar gamepads but they don't work correctly. Is it possible to "extract" it from another gamepad? If yes, can somebody who has this gamepad, "extract" it for me?
I discovered that firmware for lemon s600 will also work here. Anyone has s600 firmware or the gamepad?
Also Tracer Red Fox firmware should work here.
I also am looking for firmware for these, I have the Terios T-3, I ordered a bunch, I have 13 left with the same MAC address, the issue is I can only connect one at a time on Android. Any one will connect but not more then one, when different MAC address I could connect 4 easy. Thank you
how do you load the firmware in even?
kutysam said:
how do you load the firmware in even?
Click to expand...
Click to collapse
Anyone ever get an answer to this?

Categories

Resources