Hi. Is there firmware for this gamepad anywhere to download? I tried firmwares from similar gamepads but they don't work correctly. Is it possible to "extract" it from another gamepad? If yes, can somebody who has this gamepad, "extract" it for me?
I discovered that firmware for lemon s600 will also work here. Anyone has s600 firmware or the gamepad?
Also Tracer Red Fox firmware should work here.
I also am looking for firmware for these, I have the Terios T-3, I ordered a bunch, I have 13 left with the same MAC address, the issue is I can only connect one at a time on Android. Any one will connect but not more then one, when different MAC address I could connect 4 easy. Thank you
how do you load the firmware in even?
kutysam said:
how do you load the firmware in even?
Click to expand...
Click to collapse
Anyone ever get an answer to this?
Related
Hi to all,
I tried to make work this dongle, but with no success.
First i debranded the key (it was branded H3G, italian operator), i rooted the GPad and installed PPP Widget.
When I insert the dongle, PPP Widget says to me that he has no driver. So, where I can find these drivers?
I searched on the internet but it's very difficult to find something about that.
Thank you!
Nickname786 said:
Hi to all,
I tried to make work this dongle, but with no success.
First i debranded the key (it was branded H3G, italian operator), i rooted the GPad and installed PPP Widget.
When I insert the dongle, PPP Widget says to me that he has no driver. So, where I can find these drivers?
I searched on the internet but it's very difficult to find something about that.
Thank you!
Click to expand...
Click to collapse
Sorry you are out of luck. Kernel injection of drivers was dropped after 4.0.4. So unless your kernel supports it...
nightanole said:
Sorry you are out of luck. Kernel injection of drivers was dropped after 4.0.4. So unless your kernel supports it...
Click to expand...
Click to collapse
Yeah, I red about to flash custom kernel with drivers implemented, but can't find those drivers and kernels.
Hoped to find them here!
With Samsung tablets it's possible, even with 4.3. Maybe there is a solution for GPad too.
So... No solutions?
smile.amazon.com/Standard-Android-Navigation-Bluetooth-Mirrorlink/dp/B01JULCTYE/ref=sr_1_3?ie=UTF8&qid=1504553078&sr=8-3&keywords=android+hizpo"]https://smile.amazon.com/Standard-Android-Navigation-Bluetooth-Mirrorlink/dp/B01JULCTYE/ref=sr_1_3?ie=UTF8&qid=1504553078&sr=8-3&keywords=android+hizpo
I searched on google and on this forum and maybe theres a simple reason i cant find much info about this unit.
what customizations can be done? is there custom software? Id like it so the weather shows when it starts up or something.
Im primarily using the bluetooth feature to play music but im having troubles with the sound quality. can I use a different amp software through bluetooth?
Im also planning to connect 1 or 2 amps to it. I see it has subwoofer control. anyone have any experience using a sub amp or a 4 channel amp with these android units?
I also cant get a 3g dongle to work when I have it connected. im sure its something im overlooking this is the one im using smile.amazon.com/Unlocked-Huawei-E397u-53-Worldwide-Required/dp/B01M0JY15V/ref=sr_1_2?s=electronics&ie=UTF8&qid=1504553313&sr=1-2&keywords=Unlocked+Modem+USB+4G+LTE+Huawei+%27"]Unlocked Modem USB 4G LTE Huawei E397u-53 Worldwide Hotspot Service Required Only T-mobile in US
more or less I want the best sound quality, total control of my amps and just to know what cool stuff you can do with these things. thanks!
Hi,I try all day to find MCU update and stock rom for MTDC-XRC 2GB ANDROID 7.1.2 but no lucky,is this MCU so unusual or what ??????
Please for everyone to try to help me?????
bisy said:
Hi,I try all day to find MCU update and stock rom for MTDC-XRC 2GB ANDROID 7.1.2 but no lucky,is this MCU so unusual or what ??????
Please for everyone to try to help me?????
Click to expand...
Click to collapse
That's the most recent one I coult find (2.66): https://forum.xda-developers.com/showpost.php?p=74833101&postcount=1057
kabelgleichung said:
That's the most recent one I coult find (2.66): https://forum.xda-developers.com/showpost.php?p=74833101&postcount=1057
Click to expand...
Click to collapse
Thanx wery much my friend !!!!
Only one question,do I must use file from (Yandex) or from (attached file) ????
Because this files have different extension and different size !!!!
File from "Yandex" is img.-213 kb. and file from "attached" is cfg.-525 bytes !
Thanx .
bisy said:
Thanx wery much my friend !!!!
Only one question,do I must use file from (Yandex) or from (attached file) ????
Because this files have different extension and different size !!!!
File from "Yandex" is img.-213 kb. and file from "attached" is cfg.-525 bytes !
Thanx .
Click to expand...
Click to collapse
Use the image-file from yandex.
For this MCU update,do we need only img.file or and cfg.file together copy in root folder ???
bisy said:
For this MCU update,do we need only img.file or and cfg.file together copy in root folder ???
Click to expand...
Click to collapse
You only need the image file.
P.S.: You '?' butten seems to be stuck!
kabelgleichung said:
P.S.: You '?' butten seems to be stuck!
Click to expand...
Click to collapse
I don't understood you,what do you think for that ????
TV Model: TCL LED 40D2740
Current firmware : v8-MT56552-LF1V076
Hello community, may i please ask if anyone has the update for this Model of TCL, i can't find it on official website or it's branches on different regions
also Google yielded nothing for me except one close hit v8-mt56552-lf1v192
am not sure if they are compatible or not
Thank you in Advance
silveronin said:
TV Model: TCL LED 40D2740
Current firmware : v8-MT56552-LF1V076
Hello community, may i please ask if anyone has the update for this Model of TCL, i can't find it on official website or it's branches on different regions
also Google yielded nothing for me except one close hit v8-mt56552-lf1v192
am not sure if they are compatible or not
Thank you in Advance
Click to expand...
Click to collapse
So you found v192 version of software, and you currently have v076. Where is the problem? Rest of the file name is identical, its for this model. Also, TCL makes updates for platforms, not for particular models. So usually, if the beginning of firmware name is same, this case mt56, it means its compatible with all devices from that mt56 platform.
Plekst said:
So you found v192 version of software, and you currently have v076. Where is the problem? Rest of the file name is identical, its for this model. Also, TCL makes updates for platforms, not for particular models. So usually, if the beginning of firmware name is same, this case mt56, it means its compatible with all devices from that mt56 platform.
Click to expand...
Click to collapse
thank you for your input and clarification, like i said in the post am not sure if they are compatible, doubt got me cause was thinking it might be like phones where one last letter can mean different hardware that leads to different software
silveronin said:
thank you for your input and clarification, like i said in the post am not sure if they are compatible, doubt got me cause was thinking it might be like phones where one last letter can mean different hardware that leads to different software
Click to expand...
Click to collapse
It wont install if its not compatible. Tv checks firmware before installation.
hello community may i revive this thread by asking how to install the firmware, cause i tried these steps to no avail
pull off power cord
while holding power button plug the power cord
a sad face appears then it shuts down i tried many versions from TCL directly with no success
what made my TV not booting is a failed attempt to install gapps when i placed the gapps i changed their folder permissions when i rebooted it refused to start
thank you immensely in advance
Hey. Im new in the forum, could someone give me the original firmware for the ipega pg9023? I would be very aprecciated because ive done the start+select thing and broke the controller.
I hope someone got that plss.
you could solve it ?
elcriss said:
you could solve it ?
Click to expand...
Click to collapse
Nop, still nothing
Roigo21 said:
Nop, still nothing
Click to expand...
Click to collapse
http://ipega.hk/uploads/201903/5c8f3d92ebddf.zip
ZBXon said:
http://ipega.hk/uploads/201903/5c8f3d92ebddf.zip
Click to expand...
Click to collapse
I cant update with that because my controller has no firmware. I need the first firmware file to inject to the controller and get it Back to life
Roigo21 said:
I cant update with that because my controller has no firmware. I need the first firmware file to inject to the controller and get it Back to life
Click to expand...
Click to collapse
do you know how to inject it?
elcriss said:
do you know how to inject it?
Click to expand...
Click to collapse
yes, with anduoidupdate, i already put the pg9025 firmware but some buttons were not working
AndroidUpdate?
Could you send me the link of the firmware 9025
Its not android update. Its Really anduoidUpdate.
I'll try to find the links
Firmware : http://www.mediafire.com/download/znhlvxxy6idy282/for_ipega_pg9025.psp
Flash tool: http://www.mediafire.com/download/xuh4zwlrvu4ar9c/AnduoidUpdate.rar
Driver for g910: http://www.mediafire.com/?p6glqsl5mras31k
Install the driver and press start+ select and plug the controller
Then, you just select the psp file in the anduoidupdate
I need too bro.
5c8f3d92ebddf.rar
update ipega 9023
drive.google.com
ipega 9023 update (not my link)., its from here:
juraci said:
5c8f3d92ebddf.rar
update ipega 9023
drive.google.com
ipega 9023 update (not my link)., its from here:
Click to expand...
Click to collapse
But that is the software, and the controller needs to be recognized by it, which is impossible for the fact that the controller is without firmware (or at least with pg-95's firmware). What I need is the .psp file for injection on the controller. But thanks for the help as well
I've found a psp file for ipega pg9025. it is attached. never tested. If you tell me how to extract psp file from ipega 9023, i can do that and post file here.
juraci said:
I've found a psp file for ipega pg9025. it is attached. never tested. If you tell me how to extract psp file from ipega 9023, i can do that and post file here.
Click to expand...
Click to collapse
The pg9025 i already have. But let me research on the internet and i give you a message
juraci said:
I've found a psp file for ipega pg9025. it is attached. never tested. If you tell me how to extract psp file from ipega 9023, i can do that and post file here.
Click to expand...
Click to collapse
I havent found nothing on the internet, I guess its only asking ipega to provide me the psp file through email, which I guess its an impossible task to do. But thanks anyway for disposing your controller
can some one please provide firmware for ipega 9028, this select start update method brricked controller.
i used the above firware for 9025 now the controller have lights but i am not able to connect it with any pairing button combination as controller no show in bluetooth devices .please help
ustaadg said:
can some one please provide firmware for ipega 9028, this select start update method brricked controller.
i used the above firware for 9025 now the controller have lights but i am not able to connect it with any pairing button combination as controller no show in bluetooth devices .please help
Click to expand...
Click to collapse
I have the same problem, any solution? I try with diferent fimwares, 9025 and two g910. The result is equal. Sorry my english
Hello, I know that we are already in 2021 but I would like to know if someone could already find a firmware for the PG-9021 since my problem is that I was touching all the buttons when I wanted to connect it to the pc and I stayed in update mode, I could find one workaround with a PG-9025 firmware but not all buttons work the way they want and I was looking for the original firmware or at least one that will make it work as before, thank you very much if you answer
Mod Translation
Did you find it?
Original
Lo encontraste!!!??