[Q] Now that we have S-Off, CWM or TWRP? Opinions? - Verizon HTC One (M7)

The subject pretty much says it all. Now that we have S-Off again (yay, way to go developers) which would you use and why, CWM or TWRP? Pros? Cons?

twolostminds said:
The subject pretty much says it all. Now that we have S-Off again (yay, way to go developers) which would you use and why, CWM or TWRP? Pros? Cons?
Click to expand...
Click to collapse
I've used both CWM and TWRP pretty extensively over the last few years but I have settled on TWRP just because I like the layout and ease of use. So far I haven't ran into anything that didn't play nice with either one, so for me its an aesthetic choice.

I've only used TWRP once. A lot of people are using it these days because of the theming options and it being faster than CWM but I've read too many reports about various flashes not working properly with it. Stability trumps coolness for me so I'm sticking with CWM.

I've used TWRP since I got my rezound way back when and have used it since then there where some issues fliashing kitkat when it first came out. Philz is a nice recovery too.
Sent from my HTC6500LVW using Tapatalk

Santods twrp is the best.

I wanted to chime in here: I've used both on my HTC one for Verizon and I seem to have a problem with both. After using JCase's root app and successfully getting s-off, I'm not able to get either recoveries to flash the superuser apk so that I can sustain root access. This is preventing me from flashing any rom. I know that a bunch of other people on this forum were able to get their roms flashed on so I was wondering if it's something I've done wrong, or just incompatibility with these 2 recoveries?
Steps I took:
1) installed JCase's weaksauce app, rebooted
2) obtained root, downloaded SU from market
3) proceeded with firewater to obtain s-off (successful)
4) installed clockwork recovery via fastboot.
5) proceeded to install superuser, unsuccessful.
6) rebooted phone, uninstalled SU (from 1st installation prior to s-off)
7) attempted to reinstall SU from Clockwork - fail.
8) flashed TWRP recovery, attempted to install SU, failed.
Not sure if there are other recoveries that I should be trying?
Thanks for the help!

Bobert360 said:
I wanted to chime in here: I've used both on my HTC one for Verizon and I seem to have a problem with both. After using JCase's root app and successfully getting s-off, I'm not able to get either recoveries to flash the superuser apk so that I can sustain root access. This is preventing me from flashing any rom. I know that a bunch of other people on this forum were able to get their roms flashed on so I was wondering if it's something I've done wrong, or just incompatibility with these 2 recoveries?
Steps I took:
1) installed JCase's weaksauce app, rebooted
2) obtained root, downloaded SU from market
3) proceeded with firewater to obtain s-off (successful)
4) installed clockwork recovery via fastboot.
5) proceeded to install superuser, unsuccessful.
6) rebooted phone, uninstalled SU (from 1st installation prior to s-off)
7) attempted to reinstall SU from Clockwork - fail.
8) flashed TWRP recovery, attempted to install SU, failed.
Not sure if there are other recoveries that I should be trying?
Thanks for the help!
Click to expand...
Click to collapse
Are you sure you obtained S-Off? One S-Off is complete, uninstall weaksauce, and flash recovery via fastboot (makes sure your using the latest cwm or TWP. I used this one http://forum.xda-developers.com/showthread.php?t=2416431
Boot into recovery and flash SU. Worked like a champ for me.

dcorrea said:
Are you sure you obtained S-Off? One S-Off is complete, uninstall weaksauce, and flash recovery via fastboot (makes sure your using the latest cwm or TWP. I used this one http://forum.xda-developers.com/showthread.php?t=2416431
Boot into recovery and flash SU. Worked like a champ for me.
Click to expand...
Click to collapse
Thank you so much for your response. Yup, when I hold down the power and volume down button, my hboot says Unlocked at the top (which I believe to be the status of my bootloader) and S-Off.
I flashed recovery via fastboot, and tried what I believe to be the latest versions of both Clockwork and TWRP. I'll check out the link you sent again and will post results.
Question for you, after you uninstalled the weaksauce app, you left SU installed, correct? So the process would be uninstall weaksauce, reboot to fastboot mode, flash recovery, flash rom?
Thanks again!

Bobert360 said:
Thank you so much for your response. Yup, when I hold down the power and volume down button, my hboot says Unlocked at the top (which I believe to be the status of my bootloader) and S-Off.
I flashed recovery via fastboot, and tried what I believe to be the latest versions of both Clockwork and TWRP. I'll check out the link you sent again and will post results.
Question for you, after you uninstalled the weaksauce app, you left SU installed, correct? So the process would be uninstall weaksauce, reboot to fastboot mode, flash recovery, flash rom?
Thanks again!
Click to expand...
Click to collapse
Yep that's what I did. I flashed superuser before flashing the rom though. What error do you get when you try to flash superuser?
Oh wait, I just read your initial post. Youre not trying to flash an .apk through recovery right? You should be flashing a .zip file in recovery.

You don't have to flash super user to flash a Rom either bro as long as you have custom recovery you can flash wahat ever Rom you want ?
Sent from my HTC6500LVW using Tapatalk

coachcrey said:
You don't have to flash super user to flash a Rom either bro as long as you have custom recovery you can flash wahat ever Rom you want ?
Sent from my HTC6500LVW using Tapatalk
Click to expand...
Click to collapse
Yep, just to clarify I originally flashed superuser because I kept the stock rom, but I quickly went to the debloated rom the next day. But Coach is right, you don't need superuser to flash the rom.

Philz touch is by far the most user friendly. Lots of customization options. Its based on cwm but is much better.
Sent from my HTC6500LVW using Tapatalk

I had cwm corrupt all my backups I had. Since then I ran twrp. As far as Rom issues people seems to have outdated twrp version or something about the Rom. When I had a Rom fail to flash while in recovery I would reboot recovery and would then flash just fine
Sent from my HTC6525LVW using Tapatalk

Twrp all the way. Its faster at backup and restore, and themeable.

I had really good luck with TWRP 2.6.3.4 but when I upgraded to 2.7.0.1 suddenly backups failed. Never got an answer back on why that was happening, so I switched to Phiz and haven't had a problem with it yet so I'm gonna stick with it for now.

Philz Touch Advanced CWM is the best recovery, hands down. Try it. You will see.

ccarr313 said:
Philz Touch Advanced CWM is the best recovery, hands down. Try it. You will see.
Click to expand...
Click to collapse
I tried it and wasn't impressed. Every process seemed to take forever to do. With latest twrp I can do a backup in under a min.
Sent from my HTC6500LVW using Tapatalk

Going with TWRP. It's always just worked for me.
Sent from my HTCM8

Related

Updgrading Clockwork mod

During the summer I rooted my phone and i have Clockworkmod v2.5.0.7 installed.
I am trying to upgrade to the latest version and it never seems to stick.
Using Rom manager. It says that im flashed to v5.0.2.0 yet when i boot to recovery from rom manager it loads to v2.5.0.7. Does the same thing if i choose to flash a rom though ROM MANAGER. each time v2XXX loads
So i fire up recover and try loading the zip. Bingo it works. The screen turns from green to blue and V5.0.2.0 is now there for me to use. But if i reboot and later return to recovery its back to the old V2xxxx..
Any ideas why this is happening? Is it really necessary to move on to the V5xxxx versions? I was going to try out some new roms and they failed to load yesterday through v2.5.0.7 yet the rom i had been using loaded fine.
Thanks in advance..
When you use Rom Manager to flash a rom or reboot into recovery from Rom Manager, it boots the recovery from a downloaded recovery file. It's known as fake flash or in other words, it's temporary. If you want a permanent recovery, you would need to flash a recovery.img through fastboot.
Meaple said:
When you use Rom Manager to flash a rom or reboot into recovery from Rom Manager, it boots the recovery from a downloaded recovery file. It's known as fake flash or in other words, it's temporary. If you want a permanent recovery, you would need to flash a recovery.img through fastboot.
Click to expand...
Click to collapse
if your Desire is s-off, then ROM Manager flashes recovery normally.
Sent from my HTC Desire using XDA App
rom manager now works only if u have s-off..no fake flash anymore is possible
revolutionary.io will upgrade cwm if you want
I think this thread answers one of my own questions but will ask it anyway to confirm; when I rooted my Desire (via Unrevoked) a few months back, the ROM Manager app that continues to be updated via the market offers the option to upgrade the version of CWM... is it OK to proceed with this?
I've been wary of upgrading from the version installed via the rooting process, just in case, but seeing this thread has made me think there isn't actually an issue with whatever version of recovery you have installed?
TKG26 said:
I was going to try out some new roms and they failed to load yesterday through v2.5.0.7 yet the rom i had been using loaded fine.
Click to expand...
Click to collapse
Out of curiosity - what roms you tried to load? As far as I know 2.5.0.7 was the last cwm supporting both amend and edify scripting and it never failed for me personally.
To upgrade recovery (or hboots) I always use Fastboot Commander and it's very easy to use and never let me down.
erklat said:
Out of curiosity - what roms you tried to load? As far as I know 2.5.0.7 was the last cwm supporting both amend and edify scripting and it never failed for me personally.
Click to expand...
Click to collapse
I agree. Unless you need to maintain an ext 4 partition (as 2.5.0.7 converts it to lower apparently when backing up) I see no reason to change from 2.5.0.7.
I use it even today. Best recovery IMHO.

[Q] I have superuser installed on android 4.0.4 but I still can't get root access?

I rooted my phone at 4.0.2, then applied the update up to 4.0.4 and am still able to flash new versions of clockwork mod through rom manager... However, all my other apps won't be granted root access. In the superuser application, I'm running superuser v3.0.7(41) and my Su binary is at v3.0.3, for which there is an update available. However, when I try to apply the update, it tries to ask for root privileges and gets denied access... I tried reflashing su.zip through clockwork mod touch but I guess I may be flashing an outdated su.zip? Any insight into the matter would be greatly appreciated!
Same here
Same exact scenario, I went from 4.0.2 to 4.0.4, and even after a factory restore I cant seem to get root access for any app. I checked the bootloader, and I still am rooted.
Help appreciated for us both!
try this zip...flash in recovery
http://www.box.com/s/jvcf196j7x8f8vrc9cyt
this worked for me....
if it doesn't clear superuser data first then try it again.
ezcats said:
try this zip...flash in recovery
http://www.box.com/s/jvcf196j7x8f8vrc9cyt
this worked for me....
if it doesn't clear superuser data first then try it again.
Click to expand...
Click to collapse
CWM Recovery is not working for me, and I cant flash it due to no permission for elevated commands although its rooted.
Clockwork recovery does not require root if it is already installed. If not, fastboot clockwork recovery.
I had the same issue and all you have to do is reroot the phone and all will be well then download and install ota rootkeeper for the future. The update breaks root but doesn't block it
evanextreme said:
CWM Recovery is not working for me, and I cant flash it due to no permission for elevated commands although its rooted.
Click to expand...
Click to collapse
Flash from recovery, not an app.....
Sent from my Galaxy Nexus using xda premium
jerseyh22accord said:
I had the same issue and all you have to do is reroot the phone and all will be well then download and install ota rootkeeper for the future. The update breaks root but doesn't block it
Click to expand...
Click to collapse
This did the trick!
Had this same problem earlier
I need help
I am having the same problem. I am a noob and it sucks cause I can't figure it out. I can't even go into recovery since I installed 4.0.4 someone please dumb it down so i can understand
Install busybox free, then install titanium backup free. Open busybox and click inatall. Then run
Titanium backup, it will ask you do you want it to configure root, accept this. please note After completing busybox steps reboot. Then after titanium backup steps reboot again
Did this help?
If not pm me and il see if i can help
I can't use any of my root apps. My SU isn't working. I'm pretty sure that's causing the problem. I tried updating the binary (I read that somewhere) but the process fails. Is there a way I can do it manually?
Sent from my Galaxy Nexus using XDA
brightsideme said:
I can't use any of my root apps. My SU isn't working. I'm pretty sure that's causing the problem. I tried updating the binary (I read that somewhere) but the process fails. Is there a way I can do it manually?
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
Try flashing this:
http://goo.im/superuser/Superuser-3.0.7-efghi-signed.zip
Can you please explain how to flash? I don't want to mess it up lol
Sent from my Galaxy Nexus using XDA
brightsideme said:
Can you please explain how to flash? I don't want to mess it up lol
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
Do you have CWM installed yet?
If not...
I'd recommend simply starting from the top and using my guide.
But if you have CWM:
Just navigate to "Install Zip From SD Card"
"Choose Zip"
And find it.
Yes to install.
I tried going to clockworkmod recovery but I just get that error. Last night I went into recovery using the cmd on my computer. I tried flashing that same file but it just failed.
Sent from my Galaxy Nexus using XDA
brightsideme said:
I tried going to clockworkmod recovery but I just get that error. Last night I went into recovery using the cmd on my computer. I tried flashing that same file but it just failed.
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
boot to clockworkmod manually, than flash the superuser zip from here http://www.box.com/s/jvcf196j7x8f8vrc9cyt (this does not require busybox, that why the other su zip was failing)
I can't go to recovery from my phone. When I try I just get the Droid with a red exclamation point. I'll have to do it from a computer. Only problem is that I'm at work. I'll see if I can get to one ASAP
Sent from my Galaxy Nexus using XDA
brightsideme said:
I can't go to recovery from my phone. When I try I just get the Droid with a red exclamation point. I'll have to do it from a computer. Only problem is that I'm at work. I'll see if I can get to one ASAP
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
That is the stock recovery that you're getting to.
Use my guide.
And navigate to the part about flashing a custom (CWM) recovery and flashing SU.
The SU in my post is updated to work for all users...the one you're using won't work on 4.0.4.
Jubakuba said:
That is the stock recovery that you're getting to.
Use my guide.
And navigate to the part about flashing a custom (CWM) recovery and flashing SU.
The SU in my post is updated to work for all users...the one you're using won't work on 4.0.4.
Click to expand...
Click to collapse
but i think the su zip in ur post, only work if there is busybox installed...and the stock rom doesn't have it...
this the updater-script of ur su.zip: run_program("/sbin/busybox"...
that work only on custom roms, that usually have busybox preinstalled
check the different syntax in the other su zip posted above, it doesn't require busybox
andQlimax said:
but i think the su zip in ur post, only work if there is busybox installed...and the stock rom doesn't have it...
this the updater-script of ur su.zip: run_program("/sbin/busybox"...
that work only on custom roms, that usually have busybox preinstalled
check the different syntax in the other su zip posted above, it doesn't require busybox
Click to expand...
Click to collapse
nope, he was getting a permissions error because rom manager didn't have root access, that was the issue there.
edit: re-read the post, yes, you might be right about busybox in stock recovery, although i believe cwm has a set of minimal busybox tools.
if manually booting into recovery by shutting down the phone, pressing power+vol up until Google screen appears, doesn't take him to cwm but to stock recovery, he doesn't even have cwm installed, which could very well be the case, since stock rom default behaviour overrides any existing recovery when flashing.

[Q] How to get CWM recovery working after unlocking bootloader through HTC

I have an HTC Explorer and have installed CM 9 easily. Unlock bootloader through HTC , install custom CWM recovery using fastboot, then install CM 9 zip from sd card using CWM recovery. I have tried to do the same with my daughter's Wildfire. I get as far as installing a CWM recovery but it hangs at a "hat" icon when I try to use it. I have tried several CWM img files, including the one in the "cm49?" zip. None work. Is there a way for me to get a CWM recovery working? I don't want to go through all the s-off process, I don't think it is needed. My Explorer works great with s-on. I hope someone can help. I promised my daughter I would get ICS on her phone as her Christmas present.
bobharding said:
I have an HTC Explorer and have installed CM 9 easily. Unlock bootloader through HTC , install custom CWM recovery using fastboot, then install CM 9 zip from sd card using CWM recovery. I have tried to do the same with my daughter's Wildfire. I get as far as installing a CWM recovery but it hangs at a "hat" icon when I try to use it. I have tried several CWM img files, including the one in the "cm49?" zip. None work. Is there a way for me to get a CWM recovery working? I don't want to go through all the s-off process, I don't think it is needed. My Explorer works great with s-on. I hope someone can help. I promised my daughter I would get ICS on her phone as her Christmas present.
Click to expand...
Click to collapse
If I'm not mistaken you have to flash the boot.img manually with S-ON so I think a S-Off'd device is much better and it isn't that hard to S-Off it. I don't know if the S-Off methods still work if you unlocked it before but they should.
Besides you haven't taken the CWM from Pico/Explorer and tried to install it on the Wildfire, have you?
miniAndroidian said:
If I'm not mistaken you have to flash the boot.img manually with S-ON so I think a S-Off'd device is much better and it isn't that hard to S-Off it. I don't know if the S-Off methods still work if you unlocked it before but they should.
Besides you haven't taken the CWM from Pico/Explorer and tried to install it on the Wildfire, have you?
Click to expand...
Click to collapse
Thanks for your reply. All the cwm img files I have used have come from this forum. I had high hopes for the one I extracted from "pc49img.zip" as it seemed to say it might work on another post. It installed like the other but doesn't work.
bobharding said:
Thanks for your reply. All the cwm img files I have used have come from this forum. I had high hopes for the one I extracted from "pc49img.zip" as it seemed to say it might work on another post. It installed like the other but doesn't work.
Click to expand...
Click to collapse
I got a question are you just unlocked or already rooted on the WF? I think you can't install CWM if you're not rooted. That would be nice to know. Otherwise you can may follow this guide
miniAndroidian said:
I got a question are you just unlocked or already rooted on the WF? I think you can't install CWM if you're not rooted. That would be nice to know. Otherwise you can may follow this guide
Click to expand...
Click to collapse
Just unlocked after following the procedure on "htcdev.com". With my Explorer you can root the phone with the aid of the CWM recovery you install after unlocking it. Maybe the CWM recoveries for Wildfire assume your phone is already rooted, but I don't know how to root it without having a working CWM recovery first.
bobharding said:
Just unlocked after following the procedure on "htcdev.com". With my Explorer you can root the phone with the aid of the CWM recovery you install after unlocking it. Maybe the CWM recoveries for Wildfire assume your phone is already rooted, but I don't know how to root it without having a working CWM recovery first.
Click to expand...
Click to collapse
Yeah you're right. I think the progress on S-ON should be like this:
-flash CWM
-flash superuser rights (thats how it worked on the HTC One X)
I found this:
http://forum.xda-developers.com/showthread.php?t=1484124&highlight=recovery
Let me know if it worked.
miniAndroidian said:
Yeah you're right. I think the progress on S-ON should be like this:
-flash CWM
-flash superuser rights (thats how it worked on the HTC One X)
I found this:
http://forum.xda-developers.com/showthread.php?t=1484124&highlight=recovery
Let me know if it worked.
Click to expand...
Click to collapse
Thanks for all your help miniAndroidian (the Nexus 4 should be awesome, (I am saving up, but they are not available in Australia at the moment. I told my daughter she should get one too, but she hasn't got the money either, so that's why I am working on the Wildfire)
Unfortunately the post you directed me to says you have to flash the CWM recovery from the stock recovery but I don't have that anymore as I have replaced it with the CWM recovery which just hangs. There must be a way round it, but I am no expert at all.
bobharding said:
Thanks for all your help miniAndroidian (the Nexus 4 should be awesome, (I am saving up, but they are not available in Australia at the moment. I told my daughter she should get one too, but she hasn't got the money either, so that's why I am working on the Wildfire)
Unfortunately the post you directed me to says you have to flash the CWM recovery from the stock recovery but I don't have that anymore as I have replaced it with the CWM recovery which just hangs. There must be a way round it, but I am no expert at all.
Click to expand...
Click to collapse
Same in Germany with the Nexus 4 but it should be avalible in the middle of january
Back to the topic:
You have to put the "update.zip" to the root of your SD-Card and boot into the bootloader menu (the white screen with 3 android's on the bottom) and then it should recognize the new CWM.
Terrific. I didn't understand it. My daughter lives 100km from me so I will have to visit her this weekend. She left after Christmas saying "Dad, admit it you are a failure" after I had spent hours on it, so this might show her I am not as useless as she thinks. I am intending to flash the "mini" CM 9 rom. I hope this is the best one.
bobharding said:
Terrific. I didn't understand it. My daughter lives 100km from me so I will have to visit her this weekend. She left after Christmas saying "Dad, admit it you are a failure" after I had spent hours on it, so this might show her I am not as useless as she thinks. I am intending to flash the "mini" CM 9 rom. I hope this is the best one.
Click to expand...
Click to collapse
I really hope it works (i'm out of solutions ) otherwise you should really think about S-Off'ing it.
miniCM 9 is the fastest one but the sensor buttons don't give a vibration feedback it's a kinda annoying.
Good luck
I have had a very very frustrating day. I tried "update.zip", didn't do anything. I even renamed it "pc49img.zip" nothing. I finally found a windows program called "unlock root". I used the free version. You just connect up the phone via usb and press root. It gets you to confirm it is a wildfire and then after a bit says successfully rooted. I then installed Superuser, Rom Manager and ES File Explorer to check it.
I backed up the present rom successfully with Rom Manager. It even has an option for flashing Clockworkmod recovery and one for rebooting into recovery for manual management. It downloads CWM recovery 5.0.2.0 but it doesn't work either (looking at the files on the SD card I think it is just the same as the "update.zip"). There is also an option for installing a rom from sd card but when I went to this it asked if there was any addon, and of course I need tiny gapps. It then said I need the paid version for this. Seeing the recovery didn't work I didn't want to risk it.
My conclusion is all the present CWM recoveries require S-Off. I have read some people like the Aroma installer. I know nothing about it, but I wonder if it might be possible to install the CM 9 rom with it.
I have worked out what my problem has been. I have fallen for the old Trackball trick. I must be the only person not to know you use the Trackball in CWM recovery not the power button. I sent my daughter an email and she has confirmed the recovery in Rom Manager actually works when you use the Trackball. I will have to visit her again now to install CM 9.
MiniCM9 installed. Working great. I will put a how to in "General"

[Q] Lost root and Recovery with TWRP after Update

Okay be gentle...
After the last update to JSSR15R I lost root and SU, doing the rebbot into recovery (vol down + power button) TWRP launches but when I select to go to recovery via the vol buttons and select it with the power button, all I get is the exclamation point android.
While I'm not a total idiot (debatable of course), is there a way to re-establish root and su without wiping off 15gigs of music and playlists and starting from scratch? Rooting the Nexus 7 (flo) the first time (at least for me) was a fight I eventually won, but for me it was a fight. tia Tutor
Same thing happened to me. I installed TWRP via goomanager. Then, I flashed SU update. Now I'm back rooted and going strong.
Like previous poster mentioned, just reinstall twrp and su.
Your bootloader should already be unlocked. Unlocking the bootloader is the only step that causes you to lose data.
Reinstalling twrp and su will not cause you to lose data, unless you had locked after installing them last time, and now need to unlock again to reinstall.
I reinstalled TWRP via the playstore but while it shows my directory file structure it won't install my copy of Update SuperSU 1.5.1.zip also I went to install goomanager but the descrription says you have to have root prior to installing.
As a sidenote while in TWRP if I go into rebooting the device none of the actions work except when I hit the "Bootloader" option the a error box pops up stating the option isn't available on your device. Tutor
Only way I know of to install TWRP is go to the TWRP web site and download it from there to your PC. You will find flash instructions on the web site.
Sent from my Nexus 7 using xda app-developers app
Download Goo manager from Playstore. Choose Flash Roms, It will tell you that you need a custom recovery to do this and ask if you have one or would like Goo to find one. Choose find one for me and it will download and install TWRP 2.6.3.0. After said process is complete flash SU update. Profit..
Same happened to me, but I reflashed TWRP and root access... Just curious how come that never happened with Clockwork Mod recovery being lost after applying an update to the system on the old N7.
If you don't want to lose root or recovery, it is very simple.
Boot to twrp
Install OTA update.zip
Install SuperSU 1.55 update.zip (Prior to reboot, use 1.55 as 1.65 has issues)
You will maintain root and keep twrp if you do it in this exact order.
sfhub said:
If you don't want to lose root or recovery, it is very simple.
Boot to twrp
Install OTA update.zip
Install SuperSU update.zip (Prior to reboot)
You will maintain root and keep twrp if you do it in this exact order.
Click to expand...
Click to collapse
Can TWRP generally find the latest OTA update.zip on it's own?
Lastb0isct said:
Can TWRP generally find the latest OTA update.zip on it's own?
Click to expand...
Click to collapse
Nope, download the ota manually and place on your virtual sdcard, then boot to twrp and select the file for install
installing through goomanager didn't work for me. It would say it installed but wouldn't really install. I did it using the fastboot method instead and that seemed to work fine.
Well nothing I seemed to do would allow me to re-root the Nexus 7 after the 15R update, I finally went as re-rooted from scratch using the sticky post at the beginning of this subdivision forum for the Nexus. Back up and running in root and su... thx to all those that attempted to help me thru this
CallMeTut said:
Well nothing I seemed to do would allow me to re-root the Nexus 7 after the 15R update, I finally went as re-rooted from scratch using the sticky post at the beginning of this subdivision forum for the Nexus. Back up and running in root and su... thx to all those that attempted to help me thru this
Click to expand...
Click to collapse
I used Wugfresh tool. Everything worked until I flashed the updated SU 1.65. I could never get root. I read earlier that others were using SU 1.5, so I manually went back into TWRP and flashed SU 1.5 and bam, had root! Then SU upgraded itself via the play store to the newer version. Go figure!
jyams said:
I used Wugfresh tool. Everything worked until I flashed the updated SU 1.65. I could never get root. I read earlier that others were using SU 1.5, so I manually went back into TWRP and flashed SU 1.5 and bam, had root! Then SU upgraded itself via the play store to the newer version. Go figure!
Click to expand...
Click to collapse
The update.zip for SU 1.65 is broken. A "placeholder" install script was included that does nothing.
IMO SuperSU 1.55 is the best version to use right now. The install script works, it doesn't mess with a bunch of file permissions for your *other* files in /system to support the new ota survival mode, and it has the fix for the problem that used to break the OTA installs.

Is having 2 Custom Recoverys bad?

After achieving S-Off, thanx to Romrunners method, I flashed CWM Recovery cause I prefer over TWRP. Just wanted to know if I should be concerned in having 2 recoverys installed, and how to delete the other.
Via HTC Uno!
fullmetal509 said:
After achieving S-Off, thanx to Roadrunners method, I flashed CWM Recovery cause I prefer over TWRP. Just wanted to know if I should be concerned in having 2 recoverys installed, and how to delete the other.
Via HTC Uno!
Click to expand...
Click to collapse
OK so first off you can't have 2 recoveries. Also it is called rumrunner. ROM manager is not support for this phone. And Twrp is better. Lol
fullmetal509 said:
After achieving S-Off, thanx to Romrunners method, I flashed CWM Recovery cause I prefer over TWRP. Just wanted to know if I should be concerned in having 2 recoverys installed, and how to delete the other.
Via HTC Uno!
Click to expand...
Click to collapse
That's ROM Manager's somewhat backwards way of asking you what to do about its recovery image.
The options, from top to bottom, are "Install CWM", "I have already installed CWM", and "I have already installed TWRP."
If you choose the one that applies to you, it will stop bothering you.
ROM Manager works fine, btw - once you've convinced it that you have CWM-m7vzw installed (it can even install it itself(!)) you can back up and restore and flash ROMs 'til your heart's content–even CM10.2 nightly updates.
I have a similar question, I have cwm on my htc and want to go over to twrp. What's the best way to remove cwm?
bsbuggs said:
I have a similar question, I have cwm on my htc and want to go over to twrp. What's the best way to remove cwm?
Click to expand...
Click to collapse
You do not need to remove cwm, all you need to do is put the twrp.img file in your adb/fastboot folder, boot to the bootloader, select fastboot usb - sometimes it loads automatically to this -, type fastboot devices to confirm your device then type "fastboot flash recovery twrp_filename.img" - type that without the quotes and the actual filename with .img. Once you enter that and hit enter you should get some text saying it is being sent to your phone and it should tell you if it worked or failed.
Thanks I appreciate the help..
Sent from my HTC6500LVW using Tapatalk
Guess I need to try and install twrp again. Some folks over in the omni room forum are saying that the latest cwm is what's causing baseband issues when flashing roms (no service)
Sent from my HTC6500LVW using Tapatalk

Categories

Resources