[Q] HTC one x bootloop error can enter recovery - HTC One X

Hello, I have a problem. My HTC one X cant boot with any rom.
UNLOCKED
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.39.0000
CPLD-None
MI CROP-None
RADIO-5.1204.162.29
eMMC-bootmode: disabled
CPU-bootmode : disabled
HW Secure boot: enabled
MODEM PATH : OFF
Dec 17 2012,13:59:37
I originally went through a lot of roms until I was happy to stay on CyanogenMod (can't remember which version)
recently it said there was a stable update so I downloaded it, flashed and it wouldn't get past the bootloop. In my fear and stupidity I wiped my phone without taking a backup of the version that was working on my phone, I reflashed the recovery to many different versions that wouldn't even allow me to open the phone up to USB. Thankfully I've got a version of clockworkmod touch recovery that allowed me to open it again, but every rom I try to flash on now it still sticks on the bootloop. I'm even fastbooting the image over.
The ClockworkMod Recovery version that I'm using (which is working) is v5.8.4.0
So, what am I missing, is this absolutely broken now or is this fixable?
Thank you.

Flash the boot.img from the new rom, enter the recovery and make a full wipe, then install the rom.zip

Mr Hofs said:
Flash the boot.img from the new rom, enter the recovery and make a full wipe, then install the rom.zip
Click to expand...
Click to collapse
So I went to do a full wipe, including cache and dalvik cache, and it came back with
E:unknown volume for path [/sd-ext]
Dalvik wiped
Do you think this may be part of the problem?
I followed through and installed as you said and it didn't come back with any other errors and said install from sdcard complete. I rebooted and waited but it's still just sitting on the HTC quietly brilliant screen.
The rom I tried was cm-10.1.2-endeavoru

Try a sense 5 rom, and yes that error is normal and nothing to worry about

Mr Hofs said:
Try a sense 5 rom, and yes that error is normal and nothing to worry about
Click to expand...
Click to collapse
I tried [ROM]InsertCoin 19.0-4 | SENSE 5 | JellyBean 4.2.2 | 4.18.401.2
it went through the procedure of installing, saying everything went fine, I even fastbooted the boot.img both before and after.
Interestingly it loaded to the htc quietly brilliant screen, restarted itself but now it's back to just sitting on that screen again.
What should I try next?

You are missing something or forgetting something.
Flash the boot.img :
Fastboot flash boot boot.img
Fastboot erase cache
Full wipe =
Wipe caches/dalvik caches
Factory reset
Format cache, data and system
Then install the rom.zip and reboot

Mr Hofs said:
You are missing something or forgetting something.
Flash the boot.img :
Fastboot flash boot boot.img
Fastboot erase cache
Full wipe =
Wipe caches/dalvik caches
Factory reset
Format cache, data and system
Then install the rom.zip and reboot
Click to expand...
Click to collapse
I almost feel too stupid to respond, I had done the fastboot boot incorrectly.
I had typed fastboot boot boot.ing missing out the flash.
Thank you for your time, I had missed something. Saved me from a lot of future money trouble right there.

Ah good, mistakes are made easily. Good it works now !
CASE CLOSED !

Related

[Q] Broke my phone

Hi guys,
I know there are a lot of threads with this subject and i'm trying for 4 days now. It al happend when i flashed renovate 7.0.0 just android, so no sens. When i was rebooting it just crashed everytime... So I tryed to restore my backup, still the same problem. I mount my sdcard en put numerolight rom on it, and my screen freezes on htc one x in bootanimation, for about 2 minutes en it reboots hisself, over and over again...
I tryed Ruu but i just cant get it working. not even when i get boot-signed and system.img out of the rom.zip i get a error when i try fastboot flash system system.img So i dont know what to do... Do i need to lock my bootloader before flashing system.img????
Some more info:
CID = E_11
Hboot = 0.43
S-onn
Radio = 1.1204.90.13
Clock work mod
Vodafoon NL
Europe
And i tryed those Ruu's:
RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.26.401.2_Radio_1.1204.90.13_release_251208_signed
ruu_endeavor_u_ics_40_htc_europe_1.29.401.11_radio_1.1204.105.14_release_260491_signed_c9d22
So if someone would help me would be great!! Maybe i've got the wrong ruu, i dont know it anymore!!
Okay if you want to stay on custom ROM then:
- go recovery
- wipe data/factory reset
- mounts and storage -> format system
- wipe dalvik, cache
-flash ROM (numerolight)
-flash boot.img
tomascus said:
Okay if you want to stay on custom ROM then:
- go recovery
- wipe data/factory reset
- mounts and storage -> format system
- wipe dalvik, cache
-flash ROM (numerolight)
-flash boot.img
Click to expand...
Click to collapse
Thank You!!! i dont know why he does it now, i tryed that 4 times.... Now it works!!

[Q] Phone Dont Work After Flashing CM10

Hi , Yesterday I tried to flash Cm10 official I did everything after the steps Changing my boot.img flash gapps and rom and I wipe everything before. But when I tried to turn my phone on he was stuck on black screen , I am rooted and unlockdbootloader of curse and I am s-on.
Using CWM Bootloader works fine and recovery aswell so I tried to back my HTC Sense+ nandroid backup and i am wiped every thing before but I'ts steel doesn't bootup does i need to flash Sense Boot.img ?
You need to flash the boot.img that is delivered within the rom.zip.
What hboot version do you have ? If you are on the JB hboot i suggest you try CM10.1
ok
Mr Hofs said:
You need to flash the boot.img that is delivered within the rom.zip.
What hboot version do you have ? If you are on the JB hboot i suggest you try CM10.1[/
Ops sorry I am a noob and hboot is 1.36 I think can you give me a guide to flashing IceColdJelly ?
Click to expand...
Click to collapse
I know now why CM10 didn't boot, because it needs a modified boot.img !
Icecoldjelly.....pretty much the same as any other Rom
Put the phone in the bootloader and flash the boot.img from the rom
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Enter the recovery and put the rom.zip on the sdcard (mount as usbdrive)
Then perform a full wipe
Factory reset, wipe cache,dalvik cache
Format cache,data, system
Then install the rom.zip and gapps if it has it !
ok
Mr Hofs said:
I know now why CM10 didn't boot, because it needs a modified boot.img !
Icecoldjelly.....pretty much the same as any other Rom
Put the phone in the bootloader and flash the boot.img from the rom
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Enter the recovery and put the rom.zip on the sdcard (mount as usbdrive)
Then perform a full wipe
Factory reset, wipe cache,dalvik cache
Format cache,data, system
Then install the rom.zip and gapps if it has it !
Click to expand...
Click to collapse
How can I move IceColdJelly from my computer to the phone without boot ?
You must mount the internal sdcard as a usb diskdrive, you have the option inside the recovery. What version do you have ?
i have a similar issue with my one X. i flashed it something went wrong and i now dont have an SD card or storage on my phone? any suggestions
artsonex said:
i have a similar issue with my one X. i flashed it something went wrong and i now dont have an SD card or storage on my phone? any suggestions
Click to expand...
Click to collapse
What recovery do you use, and also what version ?

[Q] tried Flashing and a new ROM >> BOOT LOOPS

Hello, i tried to put a new rom on my phone.
First i unlocked the bootloader with One_X_All-In-One_Kit_v2.3. that worked. Then i loaded CWM ( v 5.8.4.0) on my phone (that works).
Then i downloaded the cm-10.1-20130331-NIGHTLY-endeavoru. Put that one on my SD card, extracted the boot.img. used fastboot and it commands. Installed it and gapps-jb-20120726-signed too. Did the wipes. But the phones keeps hanging at the HTC logo and doesnt boot anymore. If i hold the power button it just reboots en hangs. I can get into HBOOT ( 1.39.0000)
RADIO-5.1204.162.29
eMMC-bootmode disabled
CPU-bootmode disabled
And yes i was so stupid not to make a back first....
Re: [Q] tried Flashing and a new ROM >> BOOT LOOPS
You need to install the vendors installer too
http://db.tt/u5FF3jgi
So its full wipe then install
Cm10.1
Gapps
Vendors
Will i tried it again with the Android Revolution HD 19.2, the phone booted now past the HTC quietly brilliant logo but hung at the HTC ONE Beats Audio logo. Started it up again..and it boots. BUT the screen doesnt respond anymore? I cant type my pincode...?
Well tried the CM 10.1 because my screen didnt seem to work with the Revolution version.....did all u said above....We are back to square one, the phone hangs at HTC quietly brilliant logo.
Re: [Q] tried Flashing and a new ROM >> BOOT LOOPS
Mr Hofs said:
You need to install the vendors installer too
http://db.tt/u5FF3jgi
So its full wipe then install
Cm10.1
Gapps
Vendors
Click to expand...
Click to collapse
RASEVEN said:
Well tried the CM 10.1 because my screen didnt seem to work with the Revolution version.....did all u said above....We are back to square one, the phone hangs at HTC quietly brilliant logo.
Click to expand...
Click to collapse
You must flash the vendor installer .zip after installing cm10.1 and gapps.
By the way there is a newer gapps for this rom : http://goo.im/gapps/gapps-jb-20130301-signed.zip
Sent from my HTC One X using xda app-developers app
Re: [Q] tried Flashing and a new ROM >> BOOT LOOPS
Then you might be forgetting something to wipe ?
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts & storage - format cache, data, system
Then install the CM10.1, Gapps, Vendors (without rebooting !!!)
Head down to the bootloader, type this in the command window :
Adb reboot bootloader (at this point you are still in the recovery)
Then flash the boot.img again.make sure you override the right boot.img to the fastboot folder !
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Fastboot reboot
If you do it like this it must boot up normally.
Edit : David, please stop repeating me in posts ..... its starting to get annoying. I already told him to install the vendors . Thank you.
Re: [Q] tried Flashing and a new ROM >> BOOT LOOPS
Mr Hofs said:
Then you might be forgetting something to wipe ?
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts & storage - format cache, data, system
Then install the CM10.1, Gapps, Vendors (without rebooting !!!)
Head down to the bootloader, type this in the command window :
Adb reboot bootloader (at this point you are still in the recovery)
Then flash the boot.img again.make sure you override the right boot.img to the fastboot folder !
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Fastboot reboot
If you do it like this it must boot up normally.
Edit : David, please stop repeating me in posts ..... its starting to get annoying. I already told him to install the vendors . Thank you.
Click to expand...
Click to collapse
It just seems that he didnt notice your post right
Sent from my HTC One X using xda app-developers app
Re: [Q] tried Flashing and a new ROM >> BOOT LOOPS
If he mis the text including a downloadlink........then he's freekin blind !
YAY!!! IT FINALLY WORKS. THNX TO YOU AND http://forum.xda-developers.com/showthread.php?t=1658084 this thread...
If yer One X is low on enegergy it will not charge when the bootloader is locked, but with a scripted (see thread) batch.BAT u can make it charge ...FINALLYY!!
Re: [Q] tried Flashing and a new ROM >> BOOT LOOPS
Good !
CASE CLOSED !

[Q] Suspected Bootloop

Hi guys,
I just tried to flash Kaos Droid V5.1.5 (http://forum.xda-developers.com/showthread.php?t=2236343).
I did a factory reset, and wiped the cache, as well as formatting /boot, /cache, /data, /system (pretty sure that's not a good thing...) before flashing the provided rom and gapps. I followed that up by flashing the boot.img provided with the rom, before then restarting.
When trying the power the phone on, I get the HTC 'quietly brilliant' white screen, which then goes black, and loops back to the white screen. When trying to get into recovery, the phone goes the the white screen, goes black then gives me a flash of the CWM logo, before looping back to the white screen.
I've tried re-flashing the recovery (both CWM and TWRP), through the HTC All in One Kit, but that hasn't worked. I've also tried reflashing the boot.img.
Really not sure where to go from here...any help would be appreciated
Also at the top of the bootloader is:
***UNLOCKED***
ENDEAVORU PVT SHIP S-ON RL
HBOOT - 1.36.0000
CPLD - None
MICROP - None
RADIO - 5.1204.162.29
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW secure boot: enabled
MODEM PATH: OFF
Did you also wiped the dalvik cache ?
And if that doesn't work ....try another rom. Your hboot suports them all so that's not the problem !
Mr Hofs said:
Did you also wiped the dalvik cache ?
And if that doesn't work ....try another rom. Your hboot suports them all so that's not the problem !
Click to expand...
Click to collapse
sorry, not quite sure how to dothat? is this possible without recovery? My usb debugging is disabled (is there a way to enable it in my current state?) and my phone isnt a recognized device when i type in the command adb devices.
rellikami said:
sorry, not quite sure how to dothat? is this possible without recovery? My usb debugging is disabled (is there a way to enable it in my current state?) and my phone isnt a recognized device when i type in the command adb devices.
Click to expand...
Click to collapse
Just need to boot into recovery, cwm/twrp (think that's the name) then you can wipe cache from there.
Sent from my HTC One X using xda app-developers app
Hold the power button and the volume down button together as long as it takes to reboot into the bootloader, go to the recovery from there and perform a full wipe again to be sure, don't forget the dalvik cache and reinstall the rom to be sure its a 100% install. In cwm recovery the dalvik cache is under the tab advanced.
Nevermind I fixed it using the all in one kit. I was asking about wiping cache because I couldnt access recovery, but oh well its all fixed now.
Thanks to everyone who replied
Oke good !
CASE CLOSED !

[Q] Its either no touch or no carrier network on my HTC One X

Hello,
After last one 4.2.2 update my phone was stuck at the HTC One Beats audio logo.
Then I tried restoring nandroid backup(with CID HTC__038)(http://forum.xda-developers.com/showthread.php?t=1975140) and then flashing boot.img. But this left me with no touch support.
So I tried a rom from here(http://forum.xda-developers.com/showthread.php?t=2107669) but then my phone stuck at HTC Quietly brilliant logo even after flashing boot.img.
Now when I tried to restore the nandroid back from the first link, the phone worked and the touch was working again. But this time, the phone doesn't show any carrier networks. flashing with the boot.mg from this nandroid stopped the phone's touch from working, but then the carrier network came back.
So what do I do next?
My HBOOT version is 1.73.0000
The second should work, did you perform a real full wipe before installing the rom.zip ?
sent from my .......
Yes I cleared any caches and formatted by partitions using the recovery.
Also I did clear the cache using fastboot command, but still no luck. I heard something like AROMA installer's boot.img won't work or something like that. Could that be the problem?
And thanks for replying.
What recovery are you using so i can describe all steps in detail
sent from my .......
TWRP recovery.
BTW I think you should know this. My phone was stuck at boot screen(the htc one beats audio logo) after I did the latest update. I was doing this for recovering from that.
Try this :
Flash this recovery
https://db.tt/MNtVjpOJ
Rename the file to recovery.img and flash it
Fastboot flash recovery recovery.img
Then flash the boot.img from the sd rom.zip
Fastboot flash boot boot.img
Fastboot erase cache
Then enter the recovery and do :
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts & storage - format cache, data, system
Then install the sd rom.zip and reboot
sent from my .......
I think you had suggested this same steps to someone else in here right?
I am not sure, but if you had I have already tried it.
Anyway I will try to do it again. Thanks so much for this!
Yep but its a method that should work flawlessly ! If not report back and see for other solutions
sent from my .......

Categories

Resources