Hello everyone. i have Problem with my 5C MTK 6572 when i conect USB cable to PC there is NO USB mass storage (on/off) pop up on the phone.The phone is charging when is conect to PC, but no USB mass storage device. I reset the phone 3 times, without any success. My phone is rooted. Also i try USB Mass Storage Enabler from Google play,but it dosen help. Just checked that USB debugging is Not working too.I try to change the settings from phone settings.Thanks in advance for your Help
PS: Here is more info about the Phone - android 4.2.2 kernel version 3.4.5
lazer88 said:
Hello everyone. i have Problem with my 5C MTK 6572 when i conect USB cable to PC there is NO USB mass storage (on/off) pop up on the phone.The phone is charging when is conect to PC, but no USB mass storage device. I reset the phone 3 times, without any success. My phone is rooted. Also i try USB Mass Storage Enabler from Google play,but it dosen help. Just checked that USB debugging is Not working too.I try to change the settings from phone settings.Thanks in advance for your Help
PS: Here is more info about the Phone - (sanstar72_wet_jb3) android 4.2.2 kernel version 3.4.5 Android version 4.2.2; eng.sz_server.1379834431; SDK17 KERNEL: Linux version 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP
Click to expand...
Click to collapse
do yo have CWM ?
Sakthivel_Subbiah said:
do yo have CWM ?
Click to expand...
Click to collapse
Hi, First Thank you very much for your help. i dont have a CWM ClockworkMod Recovery. Should i instal it??
Sorry if my Questions are noob i am new here. I really appreciate your help
If you don't have cwm boot into stock recovery
And wipe cache partition and wipe factory data
Sent from my Micromax A74 using XDA Premium 4 mobile app
Sakthivel_Subbiah said:
If you don't have cwm boot into stock recovery
And wipe cache partition and wipe factory data
Sent from my Micromax A74 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just to be sure that i understand you correct. i dont have option in settings to boot in stock recovery ( only have Reset all setings). So i use Mobileuncle Tools app from store There is option "Into Recovery Mode" (reboot into recovery mode) Shoud i use that optrion ??
PS: Can i use Rom Manager or Root Browser to do that?
Many Thanks
Sakthivel_Subbiah said:
If you don't have cwm boot into stock recovery
And wipe cache partition and wipe factory data
Sent from my Micromax A74 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi, i finaly manage to boot into stock recovery and wipe cache partition and wipe factory data using Rom Manager. But that dosent Help. Still have same issue the phone only charging when is connect to USB to PC. No mass storage device pop up and No USB debugging.
Please Help me
lazer88 said:
Just to be sure that i understand you correct. i dont have option in settings to boot in stock recovery ( only have Reset all setings). So i use Mobileuncle Tools app from store There is option "Into Recovery Mode" (reboot into recovery mode) Shoud i use that optrion ??
PS: Can i use Rom Manager or Root Browser to do that?
Many Thanks
Click to expand...
Click to collapse
if there is cwm for your device then install cwm via mobile uncle tools and reboot into recovery and flash your stock rom
---------- Post added at 08:28 PM ---------- Previous post was at 08:24 PM ----------
lazer88 said:
Hi, i finaly manage to boot into stock recovery and wipe cache partition and wipe factory data using Rom Manager. But that dosent Help. Still have same issue the phone only charging when is connect to USB to PC. No mass storage device pop up and No USB debugging.
Please Help me
Click to expand...
Click to collapse
did you turn on usb debugging in developer options ???
Sakthivel_Subbiah said:
if there is cwm for your device then install cwm via mobile uncle tools and reboot into recovery and flash your stock rom
---------- Post added at 08:28 PM ---------- Previous post was at 08:24 PM ----------
did you turn on usb debugging in developer options ???
Click to expand...
Click to collapse
Yes, i try almost every option usb debugging on/off, restart,recovery mode but Nothing help so far.
PS: Strange thing is that, the last days when USB mass storage/usb debuggings was still working: when i connect the USB cable the pop up USB message start to pop up ON/OFF many times without i do anything.May be the USB cable is broken. i think i find what is the Problem, The USB cable its like Iphone 5 pin USB. I just open it and find that one of the four cable was little damaged, the other three are fine .Maybe thats why the Phone charge.Maybe The damaged one is for data.To charge the phone with usb you need only voltage cables right? If data cable is broken( little damaged) you cant get usb data right? Maybe thats why when UMS was still working its just turn on/off many times without any reason and thats why USB debugging Not working too,because of the Data cable in USB. When i get new cable and will post results.:good:
Please someone tell me that my theory is True
lazer88 said:
PS: Strange thing is that, the last days when USB mass storage/usb debuggings was still working: when i connect the USB cable the pop up USB message start to pop up ON/OFF many times without i do anything.May be the USB cable is broken. i think i find what is the Problem, The USB cable its like Iphone 5 pin USB. I just open it and find that one of the four cable was little damaged, the other three are fine .Maybe thats why the Phone charge.Maybe The damaged one is for data.To charge the phone with usb you need only voltage cables right? If data cable is broken( little damaged) you cant get usb data right? Maybe thats why when UMS was still working its just turn on/off many times without any reason and thats why USB debugging Not working too,because of the Data cable in USB. When i get new cable and will post results.:good:
Please someone tell me that my theory is True
Click to expand...
Click to collapse
ya true only... atlast you found the problem, solve it..
Related
My phone isnt detected by my windows 7 OS.
I connect it to PC using usb cable and all I see is that the phone is charging and there is NO USB mount option in the notification bar.
I re-installed kies about 5 times but no luck. I updated it to the latest version but still no luck.
Please help me out,
Hi Sir....
Have you try "wipe cache" or temporary files in your Computer (ex: with CCleaner) ?
And try to disable User Account Control too
I am also using Windows 7 with no problem when installing the Kies Software
try connecting device in another USB port, not ext , but in main USB port
ronnieryan said:
try connecting device in another USB port, not ext , but in main USB port
Click to expand...
Click to collapse
yup...definetely worth to try. you may also reconsider to change your cable data since it could be the source of the problem.
kurotsugi said:
yup...definetely worth to try. you may also reconsider to change your cable data since it could be the source of the problem.
Click to expand...
Click to collapse
yes.. the samsung original cable that is supplied with the phone has problems with me.. i used a BB cable data and it works well.. you might giving it a try..
and make sure that you r using stock rom cause kies wont recognize your device if you r on a custom rom....
Thanks for such a quick response guys.
I wiped cache with ccleaner and did a complete PC scan too. No luck.
I tried other USB ports too. Now im gonna try BB cable, cause I doubt my cable hardware now.
Thanks all.
Solved.
Hey friends i m facing a problem as soo as i connevt my sgy to usb cable it just shows charging and usb connected is not shown. I have changed cable and tried diff pc too same prob i need ur help
seems that there is problem with cable.
I tried other usb cable too
Sent from my GT-S5360 using XDA
try doing a hard reset, clear all data/cache
go to settings>privacy>clear all data
or if you know how to access recovery mode do a hard reset from there
Do you have KIES installed
?
Sent from my GT-S5360 using xda premium
GianniDPC said:
Do you have KIES installed
Noooo
Click to expand...
Click to collapse
kies is not necessary just install USB driver
and if you don't have USB driver then install kies
also try enabling USB debugging
sheksbear said:
Hey friends i m facing a problem as soo as i connevt my sgy to usb cable it just shows charging and usb connected is not shown. I have changed cable and tried diff pc too same prob i need ur help
Click to expand...
Click to collapse
basics:
hold down the notification bar and press " connect to usb"
even without installing the drivers you can still connect to your phone
but i advise you to install them
try READING before POSTING
SolutiON IS herE
try to reset ur sgy and then retry again or if it shows usb connected in notification bar open it and select connect usb storage
hope it works:cyclops::victory:
This has happened to me before.
There must be a problem with the installed drivers.
Uninstall drivers
Uninstall kies
Reboot
Clean pc with any cleaner
Now connect to Internet and then connect your device.
Drivers will be downloaded. Just wait.
Worth a try right
Sent from my GT-S5360 using Tapatalk
I know a solution,if you don't ..connect to any charger ,is it always showing charging?
im not sure if ive been looking in the wrong places but i cant find an answer to my problem. so i rooted my nexus 7 about a week ago and installed twrp. everything was working fine until i accidentally pressed wipe data instead of factory reset. i deleted EVERYTHING on my tablet including my operating system, the only thing left was twrp :crying: today my otg usb cable came in and i installed that unofficial cyanogenmod build and now it wont connect to my pc. i have usb debugging on and everything. i go to device manager (on my pc) and it is listed as "Nexus 7" but when i try to install the usb drivers it says that they dont work for it. how can i get the usb drivers to work again?
Note: its not my pc cause my rooted s3 works just fine with my pc.
sorry for being a noob! and thanks for the help!
I actually have the same issue where my Windows won't let me navigate my N7 as a portable device. Tried a whackload of drivers and the like to no avail. To transfer files I just end up using ES Explorer. Funny enough, ADB in recovery works just fine.
If it is the same as PA and PAC, try Settings > Storage > Press Menu > USB > Check MTP
Sent from my Nexus 7 using Tapatalk 4
BigDaddySunshine said:
im not sure if ive been looking in the wrong places but i cant find an answer to my problem. so i rooted my nexus 7 about a week ago and installed twrp. everything was working fine until i accidentally pressed wipe data instead of factory reset. i deleted EVERYTHING on my tablet including my operating system, the only thing left was twrp :crying: today my otg usb cable came in and i installed that unofficial cyanogenmod build and now it wont connect to my pc. i have usb debugging on and everything. i go to device manager (on my pc) and it is listed as "Nexus 7" but when i try to install the usb drivers it says that they dont work for it. how can i get the usb drivers to work again?
Note: its not my pc cause my rooted s3 works just fine with my pc.
sorry for being a noob! and thanks for the help!
Click to expand...
Click to collapse
Were you on stock before you wiped? Trying going back to stock and see if you can get MTP working, then start introducing the parts until you figure out what broke.
The USB IDs for the MTP device change more often than you'd expect causing recognition problems.
For example, on stock, with USB debugging enabled, it advertises one USB ID and also sends out a MTP-compatible flag. When USB debugging is disabled, a different USB ID is sent, minus the MTP-compatible flag.
I helped someone on a different ROM force the MTP device drivers to associate, but then the drivers couldn't initialize the device. This might indicate there is a problem on the ROM side.
---------- Post added at 11:47 AM ---------- Previous post was at 11:45 AM ----------
verkion said:
I actually have the same issue where my Windows won't let me navigate my N7 as a portable device. Tried a whackload of drivers and the like to no avail. To transfer files I just end up using ES Explorer. Funny enough, ADB in recovery works just fine.
Click to expand...
Click to collapse
If your ADB works in recovery then you must have installed some other adb device driver, other than Google's, at some point.
If you want I can try helping you get things recognized on this thread
http://forum.xda-developers.com/showthread.php?t=2391236
swagstr said:
If it is the same as PA and PAC, try Settings > Storage > Press Menu > USB > Check MTP
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
this
i have strange problem with my Samsung galaxy grand i9082 is not detecting in odwin.
phone is detected by pc, its connected as MTP or PTP mode i can transfer file from pc and mobile. but phone is not detected in odin
also when phone in download mode its not detected in odin (pc can detect it)
i have tried all odin version 3.04, 3.07. 3.09 but same problem.
phone was getting detected in odin with stock 4.2, after i flashed to custom ROM probam-20140312-UNOFFICIAL-i9082-k2wl-build9 , its not getting detected in odin.
please help me..
ROM :- probam-20140312-UNOFFICIAL-i9082-k2wl-build9
recovery :- philz_touch_6.19.3-i9082
i have tried with different USB cabled, but same problem phone is deteced by pc but not by odin, same problem on wint7, win xp, i tried it on different pc also...
please let me know what can be done, i want to re-flash to stock 4.1
Install driver software of Samsung and install the kies in pc but dont open tge kies with odin coz it will fail ur flashing process..See whether drivers r installed or else odin will not detect...
Sent from my GT-I9082 using XDA Premium 4 mobile app
U can simply find the sammy drivers (~30mbs) on a thread i made [must read thread]... Install drivers from that... Restart pc/laptop... Open odin and it will br detected, if still not; try inserting usb port about 80% or 90%(sometimes its cable problem, have faced many times ).. Do that nd u will be good to go... Hope i helped
Sent from my GT-I9082 using Tapatalk
---------- Post added at 02:12 PM ---------- Previous post was at 02:10 PM ----------
What i mean is, insert usb anf take it a bit back outside (like 10% of it, )..hope u et what i am saying !..all i mean is try adjusting it fr angles and throughs ....
Sent from my GT-I9082 using Tapatalk
raghavsharmaxda said:
U can simply find the sammy drivers (~30mbs) on a thread i made [must read thread]... Install drivers from that... Restart pc/laptop... Open odin and it will br detected, if still not; try inserting usb port about 80% or 90%(sometimes its cable problem, have faced many times ).. Do that nd u will be good to go... Hope i helped
Sent from my GT-I9082 using Tapatalk
---------- Post added at 02:12 PM ---------- Previous post was at 02:10 PM ----------
What i mean is, insert usb anf take it a bit back outside (like 10% of it, )..hope u et what i am saying !..all i mean is try adjusting it fr angles and throughs ....
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
thanks for help,
issue with my phone is, it's detected by PC but not by odin, so it seems drives are present, also i have installed kies but still same issue....
Will try installing drivers and method you said to insert USB about 80 to 90%.
can i have link for sammy drivers
anup13 said:
thanks for help,
issue with my phone is, it's detected by PC but not by odin, so it seems drives are present, also i have installed kies but still same issue....
Will try installing drivers and method you said to insert USB about 80 to 90%.
can i have link for sammy drivers
Click to expand...
Click to collapse
Yeah.. Then its usb connection problem ...
Wait..lemme give u link for it(but i dont think u need link as u have already installed drivers mahn).....
Sent from my GT-I9082 using Tapatalk
raghavsharmaxda said:
Yeah.. Then its usb connection problem ...
Wait..lemme give u link for it(but i dont think u need link as u have already installed drivers mahn).....
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
tried as suggested, to insert USB cable as 80-90% but no luck, phone gets detected in MTP mode, but not in odin... tried with 4,5 different cables.. but same result (all samsung provided cables only)..
do i need to do any changes in setting, or any other changes ( i have kept USB debugging on. )
is there any other way to flash to custom rom other than odin..
anup13 said:
tried as suggested, to insert USB cable as 80-90% but no luck, phone gets detected in MTP mode, but not in odin... tried with 4,5 different cables.. but same result (all samsung provided cables only)..
do i need to do any changes in setting, or any other changes ( i have kept USB debugging on. )
Click to expand...
Click to collapse
Don't use Samsung cables use different one in my case i used old Nokia usb cable and it worked...
anup13 said:
tried as suggested, to insert USB cable as 80-90% but no luck, phone gets detected in MTP mode, but not in odin... tried with 4,5 different cables.. but same result (all samsung provided cables only)..
do i need to do any changes in setting, or any other changes ( i have kept USB debugging on. )
is there any other way to flash to custom rom other than odin..
Click to expand...
Click to collapse
Are you getting a notification/warning message like USB device not recognized?
Try this too... Go to download mode by pressing the keys... Connect cable to your phone but not to pc. When u press volume up to continue. Insert the cable to usb 2.0 port of your computer.
I mean insert the cable in to PC qt the same time when you press Volume Up key when prompted to continue to download mode.
The above method is just for a try.The problem may be with your phone/drivers. Drivers which are essential to detect usb phone flashing parent. Bt kies is enough.
So may be a problem with your download mode.
Sent From Galaxy Grand running RR 5.0.6
Uninstall all drivers n kies as well....restart ur pc n install again from scratch....n try...it happened with me many times...just suggestion...
DMJoh said:
Are you getting a notification/warning message like USB device not recognized?
Try this too... Go to download mode by pressing the keys... Connect cable to your phone but not to pc. When u press volume up to continue. Insert the cable to usb 2.0 port of your computer.
I mean insert the cable in to PC qt the same time when you press Volume Up key when prompted to continue to download mode.
The above method is just for a try.The problem may be with your phone/drivers. Drivers which are essential to detect usb phone flashing parent. Bt kies is enough.
So may be a problem with your download mode.
Sent From Galaxy Grand running RR 5.0.6
Click to expand...
Click to collapse
Thanks for you help. it worked.. now odin is able to detect my phone.. :good:
anup13 said:
Thanks for you help. it worked.. now odin is able to detect my phone.. :good:
Click to expand...
Click to collapse
Thats Great!! HAppy to hear that :laugh: :good:
DMJoh said:
Are you getting a notification/warning message like USB device not recognized?
Try this too... Go to download mode by pressing the keys... Connect cable to your phone but not to pc. When u press volume up to continue. Insert the cable to usb 2.0 port of your computer.
I mean insert the cable in to PC qt the same time when you press Volume Up key when prompted to continue to download mode.
The above method is just for a try.The problem may be with your phone/drivers. Drivers which are essential to detect usb phone flashing parent. Bt kies is enough.
So may be a problem with your download mode.
Sent From Galaxy Grand running RR 5.0.6
Click to expand...
Click to collapse
Thanks alot man, it worked great! i had the same problem as above!
Odin is not detecting my phone
I have tried almost all methods, but still my samsung i9082 is not detected by odin. And when ever i connect my samsung with laptop during download mode.. One driver is shown as not installed name "CDC serial".
Please help
Not Detecting Odin + Dnt have CWM , and need custom rom
i have same problem , it says Base Station Not Installed ,
1. I am unable to enter to recovery mode it goes on both volume up+ home + power & volume down+ home + power , into download mode .
2. I need to flash custom rom and want any CWM so i can go to recovery mode whenever i want
3. When i factory reset from setting , it only runss on android cartoon , and after that it goes straight to screen , no language selection as we do in all androids after reset by clicking next next , but it goes directly to screen.
Install every driver , and also changed phone , buy another one but same problem
Please sir help me regarding above issues i will be greatful to you .
Thanks & Regards,
Inayat
inayat1988 said:
Install every driver , and also changed phone , buy another one but same problem
Please sir help me regarding above issues i will be greatful to you .
Thanks & Regards,
Inayat
Click to expand...
Click to collapse
What do you mean exactly by changed phone and buy another one?
INVALID IMEIs / SIMS not working
Dear Sir,
I got that i need IMEI fixing as it is showing invalid both imeis. (board is MT6572)
1. Set is LG L Bello , info is given in pix attched please.
2. For rooting Tried almost all methods GUI but all failed rooting.
3. Tried To fix IMEI from MTK-DROID-TOOLS , showing errors, pix are attached.
Please help me to flash CWM , Root my device and fix Invalid IMEIs issue.
Note : all info i considered needed for you to help me, is attached in shape of pix
Best Regards,
Inayat
please help me and save me
please help me my grand 2 is made by Vietnam, and its not detectable in any of the trick mentioned above , please help me , one thing when i plug my mobile with pc , and check the my pc properties , it shows yun os interface .. please help me how i can able to detect this interface with odinn please help ...
Hello,my tab sm t705 not detecting usb otg cable,and usb drive when connecting to pc,its only showing charging but no prompt for mtp like it usually did,how to solved?
this happen after my otg drive often auto connect/disconnect a few times, thinking the cable broken,already buy a new one but still not detect.
My usb debugging is already tick,mtp+adb is already tick.
Tried factory reset but still not detect.
Already try googling but no result
Is this software or hardware problem?
BTw im using iron man rom & kernel.
cinmil said:
Hello,my tab sm t705 not detecting usb otg cable,and usb drive when connecting to pc,its only showing charging but no prompt for mtp like it usually did,how to solved?
this happen after my otg drive often auto connect/disconnect a few times, thinking the cable broken,already buy a new one but still not detect.
My usb debugging is already tick,mtp+adb is already tick.
Tried factory reset but still not detect.
Already try googling but no result
Is this software or hardware problem?
BTw im using iron man rom & kernel.
Click to expand...
Click to collapse
Check your win drivers in device manager. Ensure the Mtp driver is active.
Already check.not pc problem.and already installed samsung usb driver
cinmil said:
Already check.not pc problem.and already installed samsung usb driver
Click to expand...
Click to collapse
Fair do's but does it detect the device in device manager as an MTP device when connected?
Nothing detected on my pc except for mouse usb.no connection sound,nothing happen when the usb plug in,except my phone showing charging
cinmil said:
Nothing detected on my pc except for mouse usb.no connection sound,nothing happen when the usb plug in,except my phone showing charging
Click to expand...
Click to collapse
Have you tried just a normal USB cable to see if mtp works?
What u mean by that ?sorry a little noob about this.
But i have try connecting other phone.and its work perfectly fine.its detect as portable media..dont know what the problem with my tab.also i have try ant+ tester app.and its showing ant support built in firmware no service?is it normal?can anyone who have t705 try it?
cinmil said:
What u mean by that ?sorry a little noob about this.
But i have try connecting other phone.and its work perfectly fine.its detect as portable media..dont know what the problem with my tab.also i have try ant+ tester app.and its showing ant support built in firmware no service?is it normal?can anyone who have t705 try it?
Click to expand...
Click to collapse
For MTP you just need a normal USB cable not OTG.
This is result when using ant tester
ashyx said:
For MTP you just need a normal USB cable not OTG.
Click to expand...
Click to collapse
Ok understand wht u mean now,already done doing that.that wht i want to tell,showing nothing detect on my laptop eventough usb cable is already plug in.already check on device manager>root hub properties.and check what usb is connecting and only show the mouse usb.phone cable not detect on any usb root hub.
Solved
After a few days thinking of solution then i try to go download mode and plug the usb cable to pc and voila.usb updte installer pop up means its detecting now.and i cncel the updte and go to normal mode and its also detecting.mayb some software failure that its happen.btw i just uninstalled and installed new driver and let it updte after it detect the usb.problem solved.nearly changing new micro usb port?
cinmil said:
After a few days thinking of solution then i try to go download mode and plug the usb cable to pc and voila.usb updte installer pop up means its detecting now.and i cncel the updte and go to normal mode and its also detecting.mayb some software failure that its happen.btw i just uninstalled and installed new driver and let it updte after it detect the usb.problem solved.nearly changing new micro usb port?
Click to expand...
Click to collapse
Bro can you explain how did you solve the issue
sai143420 said:
Bro can you explain how did you solve the issue
Click to expand...
Click to collapse
Sorry bro.this post been too long.but from i remmember i donwload some app for pc.and enter my phone to download mode.maybe the app is official for samsung download mode.
What do you mean by download mode
---------- Post added at 03:18 AM ---------- Previous post was at 03:18 AM ----------
cinmil said:
Sorry bro.this post been too long.but from i remmember i donwload some app for pc.and enter my phone to download mode.maybe the app is official for samsung download mode.
Click to expand...
Click to collapse
What's that app name