Related
I was trying to put the hum/hiss sound fix on my sd card and I cannot get my pc to connect via USB...
My wife has a TP2 and it connects fine...
I have tried with/without the sd card in, rebooted the pc and phone, rebooted the phone while connected to the pc.... nothing...
wtf...
anyone else with this problem?
PS... NRGZ28 had posted a very basic rom for booting to android back in Feb and it is now gone from hotfile. Anyone know of a quick boot into android?
- Try a different computer
- Try a hard reset
That are the first thing you should do.
Tried hard reset...
Dif PC is not an option at the moment... I have rebooted...
Just flashed the ROM (NRGZ newest, thank goodness I had it on my SD card) and I still cant get it to sync...
I have attached the USB error I am getting... (Win7, new install)
The phone is not asking if I want to active sync or use as storage???? wtf...
FarBeyond said:
Just flashed the ROM (NRGZ newest, thank goodness I had it on my SD card) and I still cant get it to sync...
I have attached the USB error I am getting... (Win7, new install)
The phone is not asking if I want to active sync or use as storage???? wtf...
Click to expand...
Click to collapse
Reboot your PC? lol bet your tried that already...
Try this:
settings > connections > usb to pc > and disable Faster Data Sync then try. This way uses the generic usb drivers and maybe it will connect.
That did not work...
How do I get my Win7 laptop to see the phone with Android on it?
FarBeyond said:
That did not work...
How do I get my Win7 laptop to see the phone with Android on it?
Click to expand...
Click to collapse
dont think thats working yet
Ya I don't think that works yet, it's tied to Android software drivers and the use of the USB port, since there is no drivers to control the port only to charge battery. Windows thinks there is something there, but the phones USB can't communicate back....I think this is the issue or at lease after playing around with it on my phone anyway
Not that it's a huge amount of help but might troubleshoot down to the hardware level...if you go into bootloader mode on the phone and connect to USB does it connect?
I don't think you should go that deep and dirty. My touch pro 2 works only with only 1 (non-HTC) cable of the 10 i have at home, all are the "standard" mini-USB but only one works flawlessly for communicating/flashing/syncing, the other cables either do the same error - device not recognized - or windows says that the device could communicate faster - and only copies files slowly.
All in all: you should simply check with another USB cable or if you have the factory HTC cable try it with that. I noticed that the cable i am using other than the HTC one is a very good quality thick (low-resistance and double-shielded) USB cable and it never failed on me.
One other thing you should definitely watch for: plug the USB cable into the motherboard USB port directly (on the back of the PC where you plug the keyboard, mouse etc.), sometimes PC cases with front panel USB outputs simply die, or are wrongly attached to the motherboard USB header and it can cause the aforementioned problems too, not to mention if it is wrongly attached it could harm your phone too.
My phone won't activeSync to my computer. I try Hardreset many times and no luck. PLEASE HELP ME SOMEONE.
1. If you open a topic, please please help is not a question. So next time, but your problem in the title, not please please help.
2. What rom do you use?
3. Did you try a different computer? Tried reinstalling active sync? Tried deleting the phone drivers on your computer?
Lennyz1988 said:
1. If you open a topic, please please help is not a question. So next time, but your problem in the title, not please please help.
2. What rom do you use?
3. Did you try a different computer? Tried reinstalling active sync? Tried deleting the phone drivers on your computer?
Click to expand...
Click to collapse
I'm using core cell evo v3.0, I did try a different computer and it didn't work. Both computers didn't recognize my phone was plug-in.
derride8 said:
I'm using core cell evo v3.0, I did try a different computer and it didn't work. Both computers didn't recognize my phone was plug-in.
Click to expand...
Click to collapse
When you plug in the USB, you should get a menu that asks if you want to use activesync or disk drive. Do you get this screen?
You may have a bad USB port. The TP2 is know to have this issue - I just had to return mine after 6 months for a warranty replacement because the USB port went bad.
stevedebi said:
When you plug in the USB, you should get a menu that asks if you want to use activesync or disk drive. Do you get this screen?
You may have a bad USB port. The TP2 is know to have this issue - I just had to return mine after 6 months for a warranty replacement because the USB port went bad.
Click to expand...
Click to collapse
I still need help please anyone. I just came back from the shop, I change the USB port and still the computer don't recognize that the phone is plug-in.
derride8 said:
I still need help please anyone. I just came back from the shop, I change the USB port and still the computer don't recognize that the phone is plug-in.
Click to expand...
Click to collapse
are you using the original usb cable? also which windows are you running and which rom on your phone?
djteotancolis said:
are you using the original usb cable? also which windows are you running and which rom on your phone?
Click to expand...
Click to collapse
Yes, I'm using the original cable and bought a new one and nothing. I'm running WM6.5.x, The ROM is core cell v3.0
derride8 said:
I still need help please anyone. I just came back from the shop, I change the USB port and still the computer don't recognize that the phone is plug-in.
Click to expand...
Click to collapse
What "shop" did it just come back from?
In Settings -> Connections -> USB to PC, what checkboxes are selected/not selected?
Do you have 'Ask me first....' selected & 'Enable faster data synchronization' un-selected?
sounds like ur usb port is fried. flash stock rom via SD,relock and get it replaced.
i had notice there is alot similar post to this problem but none really solved it. so i start this thread to make it more specific
1) once connected to pc, my wildfire automatically charge
2) no pop-up or option on the top to slide down to select either htc sync, mount as sd card, etc
3) tried reboot, mount unmount card, untick usd debugging, changed other rom, but still not working.
4) if connected to pc still automatically charging even if i change "default connection type" to disk drive, or usb tethering
5) i tick "ask me" so i can choose the connection type when connect to pc, but when connected to pc, nothing. just charging.
i'm rooted, using hg hybrid v3 (problem was there before i flash HG rom). it used to work before. i dont recalled when was the last time it start to behave like this. all this time i thought i set the connection default to charging, but when i want to transfer songs, only then i realised this problem. i m not sure which custom rom might cause this problem (if it does) because i had flash more than 10 roms
i have same problem with cm7
I haven't try to format my sd card. because when I connect without sd card, still no connect option. if my card is malfunction/the main problem, then my phone should work fine n show the connect option after I remove the card, right? (I do have connection option on the setting. what I meant no connection option is the pop up conection menu+connection option on the top bar. changing the connection on the setting change nothing)
I too have this prob but never questioned this as i never use htc sync. But if u really wanna use it try this i'm not sure it may work or not but mostly its due to driver problem:
1.Connect your device in htc sync mode.
2.Uninstall or Remove all drivers of htc and also htc sync.
3.Disconnect your device and Restart your pc.
4.Reinstall htc sync and connect your device in htc sync mode.
5.It'll install fresh drivers for your device and if asked to restart then do it else run htc sync.
If you are running vista or later try to run htc sync in administrator mode.
I'm not sure this method work but there's no problem on trying it. Reply your result after doin above steps
I also think the problem might related to my driver but I remember that when I first connect to my pc, there will be pop up menu, and my phone automatically recognized as "disk drive" (I m not install HTC driver yet. infact ,I install the driver after my phone connected to my pc through disk drive connection since the driver located on the SD card). nway, I"ll try your method and post the result later.
I just notice this might not work..the problem is I cannot change the connection. even if I did, it doesn't change the connection. it just charging.. as if I put it on default "charging" as it connect. but I will try later anyway
When i connect my phone the debugging icon shows up and my pc makes the noise but doesnt let me choose mass storage (running cm7). it shows up on my pc on drive f: but when i click it just says please insert a disc into removable storage F:
xynok, did u tried untick the usb debugging? go to setting, application, development, untick usb debugging. u still lucky at least it prompt u something if u connect to pc, mine nothing. its like I plug it to the socket wall not pc
anakhanjing said:
xynok, did u tried untick the usb debugging? go to setting, application, development, untick usb debugging. u still lucky at least it prompt u something if u connect to pc, mine nothing. its like I plug it to the socket wall not pc
Click to expand...
Click to collapse
yeah i tried that
lokeshramesh said:
I too have this prob but never questioned this as i never use htc sync. But if u really wanna use it try this i'm not sure it may work or not but mostly its due to driver problem:
1.Connect your device in htc sync mode.
2.Uninstall or Remove all drivers of htc and also htc sync.
3.Disconnect your device and Restart your pc.
4.Reinstall htc sync and connect your device in htc sync mode.
5.It'll install fresh drivers for your device and if asked to restart then do it else run htc sync.
If you are running vista or later try to run htc sync in administrator mode.
I'm not sure this method work but there's no problem on trying it. Reply your result after doin above steps
Click to expand...
Click to collapse
not working..
try this if u r using sense roms . Also try this for AOSP roms, if there is an option(i dont know about AOSP).
Go to Settings/Applications/Manage applications/All/
Then search for "Connect to PC". Actually in stock roms that was an app by htc. But there must be something similar to that in AOSP roms. Then open that and select, "Force stop" , "Clear data", "Clear cache".
I dont know for sure if that solves the issue or not. But have a try.
And by seeing this thread, actually i got a doubt, "can we synchronise the htc sync in AOSP custom roms". Since AOSP is nothing but removing the HTC crap. Can someone confirm this .......
bharatgaddameedi said:
try this if u r using sense roms . Also try this for AOSP roms, if there is an option(i dont know about AOSP).
Go to Settings/Applications/Manage applications/All/
Then search for "Connect to PC". Actually in stock roms that was an app by htc. But there must be something similar to that in AOSP roms. Then open that and select, "Force stop" , "Clear data", "Clear cache".
I dont know for sure if that solves the issue or not. But have a try.
And by seeing this thread, actually i got a doubt, "can we synchronise the htc sync in AOSP custom roms". Since AOSP is nothing but removing the HTC crap. Can someone confirm this .......
Click to expand...
Click to collapse
nope. still nothing. anyway since it had this problem, I had wipe my wildfire few times, n try different rom.. maybe it is because of faulty cable. but if the cable is the culprit, why it still charging? is it possible the cable is broken but still can charging?
anakhanjing said:
nope. still nothing. anyway since it had this problem, I had wipe my wildfire few times, n try different rom.. maybe it is because of faulty cable. but if the cable is the culprit, why it still charging? is it possible the cable is broken but still can charging?
Click to expand...
Click to collapse
Not telling that it should be, but definitely there is a possibility of a cable culprit.
The USB male/female end has 4 connections in which two connections are used for voltage and the remaining two connections are used for data transfer.
There might be a possibility that the data connection got broken with voltage connection retaining. Try with another cable (any USB v2 cable).
And one more thing, for having the disk drive option, nothing need to be installed in the pc. U need to install htc driver in the pc only if u want to use usb debugging , usb tethering.
[But at the wildfire end the cable has 5 connections and i dont know what the 5th one is for. mostly it will be a NO CONNECTION]
Now i got another idea to diagnose ur issue.
Well do u know of application "pdanet". It uses USB DEBUGGING feature to tether ur phone internet to PC. Actually usb debugging can be used both under charge mode and disk drive mode. What u can know on doing this is whether usb debugging through ur phone is working or not. U can diagnose the thing while checking with every app that uses usb debugging. So try it. Enable the usb debugging in phone first.
---Install pdanet desktop version and follow the setup instructions. It asks to connect ur phone during setup to install usb driver and also pdanet.apk to mobile. Connect ur phone with usb debugging enabled. I doubt whether desktop version installs or not because of ur issue. Mostly desktop version of pdanet will not install without a phone connected having usb debugging enabled. And if the desktop version is installed successfully, that means ur phone usb debugging is working. And if desktop version is installed successfully, that means it also installed the mobile version of pdanet.apk to ur phone (which says that data transfer is working). Then open the pdanet on phone and enable usb tether. Then open pdanet from desktop and connect. Then see whether u r able to access internet from pc.
---One more method is try to use ADB from android sdk. It also uses the usb debugging feature.
If adb and pdanet works, that means usb debugging feature on ur phone is working. If it is so, then it is mostly not a cable problem (as far as i know). And if they dont work there is a chance that it is a cable problem.
......................................................................................................................................................................................
And one more thing. If u have used a stock rom (freshly formatted), and faced the issue, then it is mostly not a software problem. Then it might be cable problem or some kind of problem in ur phone. Also check ur phone radio version. Thats all.
bharatgaddameedi, i cant install pdanet. it say android phone not detected. error =103. i think u were right. its hardware related problem but its look like not the cable. most probably its my wildfire usb jack. i test the cable with other mobile, its working (test it on nokia 5800). before i had this problem, sometime i use htc cable to transfer data for my 5800, and some time i used 5800 cable to transfer data for my wildfire. the difference between the two cable pin might damage my wildfire usb jack.. (u said htc cable got 5 pin, so i asume nokia got 4?)
anakhanjing said:
bharatgaddameedi, i cant install pdanet. it say android phone not detected. error =103. i think u were right. its hardware related problem but its look like not the cable. most probably its my wildfire usb jack. i test the cable with other mobile, its working (test it on nokia 5800). before i had this problem, sometime i use htc cable to transfer data for my 5800, and some time i used 5800 cable to transfer data for my wildfire. the difference between the two cable pin might damage my wildfire usb jack.. (u said htc cable got 5 pin, so i asume nokia got 4?)
Click to expand...
Click to collapse
So, pdanet not detecting the phone means usb debugging is also not working under charge mode. That should be phone hardware related problem like u have said about usb jack.
And No. All the micro USB version 2 cables will be the same. Its same for 5800 and wildfire. I use my previous 5233 cable to my wildfire even now.
The usb jack of wildfire may damage if u have used it in an improper way. Something like pressure on the cable when connected and so on...
So, its not something we can solve here. That should be given to service centre as far as i know
anakhanjing said:
the difference between the two cable pin might damage my wildfire usb jack.. (u said htc cable got 5 pin, so i asume nokia got 4?)
Click to expand...
Click to collapse
Can't be. I am using my N82's data cable for data transfers on my Wildfire from Day 1. The provided data cable is pretty much permanently attached to the wall charger.
I accept the fact that it might be hardware problem but there is one more thing I want to try. how about flashing stock rom from pc? flashing 2.1 is ok since it can be rooted again. I had flash stock rom but from the clockwork mod, not from pc, and the hboot is been remove for save flashing. I never try this before because all this time I thought that the problem was cause by custom rom, so I just need to find the right custom Rom.
How can u flash a stock Rom from pc when the usb is not functioning. RUU will not work.
Things get worse when basic things stop functioning.
Sent from my HTC Wildfire using XDA App
Did you try mounting your SD Card via Recovery? Reboot into Recovery > Advanced > Mount SDCard
Just at the title says. Yes i have tried different ports and cords. All drivers are up to date. All cables and ports work as they all work with my nexus 7. What am I missing?!?!
ShadeXVII said:
Just at the title says. Yes i have tried different ports and cords. All drivers are up to date. All cables and ports work as they all work with my nexus 7. What am I missing?!?!
Click to expand...
Click to collapse
Enabled USB debugging?
Thought that may have been the issue... Enabled USB debugging still same issue.
Edit: If i change it to PTP i can see it as phone on the PC but can't view it MTP.
Try reinstalling drivers and reboot computer
ShadeXVII said:
Thought that may have been the issue... Enabled USB debugging still same issue.
Edit: If i change it to PTP i can see it as phone on the PC but can't view it MTP.
Click to expand...
Click to collapse
I think some drivers have to be installed for viewing in MTP..
I have provided a zip file of Asus Android USB drivers... There is a folder named MTP... I think you have to install those drivers.. These drivers are compatible with XP,VISTA, 7..
Please confirm the working of MPT/Drivers if successful
I have the same issue.
Windows 7 only recognises the ZF2 once out of around 10 connection attempts.
I found that deleting the USB common drivers and re-booting Windows works for one new connection, but after that the problem returns. I think the drivers that are automatically downloaded are not very reliable / stable.
I find that if I keep unplugging / re-plugging the cable, it will eventually recognise it.
It's a bit of a pain to be honest and it doesn't matter how many different cables or different USB ports I try it makes no difference.
I just spent 20 minutes with this issue ... until I realized I was using my HTC USB cable. I decided to follow the most common suggestion and plugged in the ORIGINAL ASUS cable that came with the ZF2. Worked flawlessly.
Hope you have the same luck!
Ended up being something wrong with a quick charge driver on my mother board with this. Ended up reflashing BIOS and removing that and it fixed my issue. Talked to other people as well and a lot are reporting they have to use the cable it came with as well.
ShadeXVII said:
Ended up being something wrong with a quick charge driver on my mother board with this. Ended up reflashing BIOS and removing that and it fixed my issue. Talked to other people as well and a lot are reporting they have to use the cable it came with as well.
Click to expand...
Click to collapse
That's great to hear!
I also have an Asus board, but good thing I did not install the Quick charger drivers! I would never guess that as the culprit!
lordpipa said:
Try reinstalling drivers and reboot computer
Click to expand...
Click to collapse
Please. tell me how to install Asus UDB Drivers from the Zip File on Windows 7
Did you had to reflash with adb sideload? or just going to the recovery mode and selecting hard reset?
Hello,my tab sm t705 not detecting usb otg cable,and usb drive when connecting to pc,its only showing charging but no prompt for mtp like it usually did,how to solved?
this happen after my otg drive often auto connect/disconnect a few times, thinking the cable broken,already buy a new one but still not detect.
My usb debugging is already tick,mtp+adb is already tick.
Tried factory reset but still not detect.
Already try googling but no result
Is this software or hardware problem?
BTw im using iron man rom & kernel.
cinmil said:
Hello,my tab sm t705 not detecting usb otg cable,and usb drive when connecting to pc,its only showing charging but no prompt for mtp like it usually did,how to solved?
this happen after my otg drive often auto connect/disconnect a few times, thinking the cable broken,already buy a new one but still not detect.
My usb debugging is already tick,mtp+adb is already tick.
Tried factory reset but still not detect.
Already try googling but no result
Is this software or hardware problem?
BTw im using iron man rom & kernel.
Click to expand...
Click to collapse
Check your win drivers in device manager. Ensure the Mtp driver is active.
Already check.not pc problem.and already installed samsung usb driver
cinmil said:
Already check.not pc problem.and already installed samsung usb driver
Click to expand...
Click to collapse
Fair do's but does it detect the device in device manager as an MTP device when connected?
Nothing detected on my pc except for mouse usb.no connection sound,nothing happen when the usb plug in,except my phone showing charging
cinmil said:
Nothing detected on my pc except for mouse usb.no connection sound,nothing happen when the usb plug in,except my phone showing charging
Click to expand...
Click to collapse
Have you tried just a normal USB cable to see if mtp works?
What u mean by that ?sorry a little noob about this.
But i have try connecting other phone.and its work perfectly fine.its detect as portable media..dont know what the problem with my tab.also i have try ant+ tester app.and its showing ant support built in firmware no service?is it normal?can anyone who have t705 try it?
cinmil said:
What u mean by that ?sorry a little noob about this.
But i have try connecting other phone.and its work perfectly fine.its detect as portable media..dont know what the problem with my tab.also i have try ant+ tester app.and its showing ant support built in firmware no service?is it normal?can anyone who have t705 try it?
Click to expand...
Click to collapse
For MTP you just need a normal USB cable not OTG.
This is result when using ant tester
ashyx said:
For MTP you just need a normal USB cable not OTG.
Click to expand...
Click to collapse
Ok understand wht u mean now,already done doing that.that wht i want to tell,showing nothing detect on my laptop eventough usb cable is already plug in.already check on device manager>root hub properties.and check what usb is connecting and only show the mouse usb.phone cable not detect on any usb root hub.
Solved
After a few days thinking of solution then i try to go download mode and plug the usb cable to pc and voila.usb updte installer pop up means its detecting now.and i cncel the updte and go to normal mode and its also detecting.mayb some software failure that its happen.btw i just uninstalled and installed new driver and let it updte after it detect the usb.problem solved.nearly changing new micro usb port?
cinmil said:
After a few days thinking of solution then i try to go download mode and plug the usb cable to pc and voila.usb updte installer pop up means its detecting now.and i cncel the updte and go to normal mode and its also detecting.mayb some software failure that its happen.btw i just uninstalled and installed new driver and let it updte after it detect the usb.problem solved.nearly changing new micro usb port?
Click to expand...
Click to collapse
Bro can you explain how did you solve the issue
sai143420 said:
Bro can you explain how did you solve the issue
Click to expand...
Click to collapse
Sorry bro.this post been too long.but from i remmember i donwload some app for pc.and enter my phone to download mode.maybe the app is official for samsung download mode.
What do you mean by download mode
---------- Post added at 03:18 AM ---------- Previous post was at 03:18 AM ----------
cinmil said:
Sorry bro.this post been too long.but from i remmember i donwload some app for pc.and enter my phone to download mode.maybe the app is official for samsung download mode.
Click to expand...
Click to collapse
What's that app name