Long Story short - Tried to update Wamo Pro 1 with g910 firmware( I thought I have g910 as I ordered g910), I Had connected both Gamepads (Wamo Pro 1 and BTP-2185)
I think I accidentally updated my BTP with G910 firmware and my BTP is not turning on anymore. And the worst is that now my Wamo Pro 1 (I thought it to be g910) can't be detected by Bluetooth on PC, Galaxy S4 or S2 and even worse AnduoidUpdate doesn't work anymore it says please connect controler to PC.
Folks.. Is there any chance that I could resurect My Betop BTP-2185 ?
Where could I get back it's Stock Firmware ? www betop-cn com is not opening for me. Can't get any aditional info.
How could I make my PC recognize Wamo Pro 1 (probably with g910 firmware) again so i can Update to Wamos firmware...
I think I have messed up here big time. I really hope there is something I can do to get both of controlers working as i have them for less than a week.
Please lead me any direction... I have no clue what to do.
Is there any way how to Force detect device ?
Device is sort of working, but can't be reached via Bluetooth. But when it's connected through USB pc is not listing as detected but it's still charging it.
Related
So i recently bought a ps3 sixaxis controller from amazon ( apparently not sony oem, but it cost me like 40 bucks) and ive been trying to make it work with my GS2 for the past week with no luck... Ive downloaded the sixaxis program for my phone and the pairing tool for my PC .. Ive already made sure that the Bluetooth address matches the one from my phone with the pairing tool, and so then i start the sixaxis program on my phone, I click start (and power on my controller, all the lights are flashing) it says its trying to start the first connection but bluetooth connection failed .. so its attempting a second connection, and finally it says client connected :1, my controller though is still flashing all the lights and then it eventually stops and my screen reads client disconnected . What am i doing wrong ? ive tried the deodexed rom and seamster rom , nothing seems to pair it up, anyone else have this problem? Ive checked other posts but it seems to either be working or not working for some people .
Maybe it doesn't work because it's not sony oem?
http://www.amazon.com/PlayStation-D...ARJI/ref=sr_1_6?ie=UTF8&qid=1327391564&sr=8-6
A real one is only $40.
Yup, should of got a real one.. That works but i bet you bought those generic ones with extra buttons and turbo mode?? Those are dumb controllers..
Sent from my SGH-T989 using Tapatalk
no i bought one that looks exactly like the sixaxis, it even says sony and ps3 sixaxis on the box
im just gonna return it anyways and get a real one
I have used many different ROM's and I cant for the life of me get this software to work on my t-999, I just got a new controller today.
Its acting like its not even paired with my phone but I am sure it is since I plug the controller via usb into my phone and manually set it there, and it seems like its taking it (it gives me the option to push it to the controller)
so my question is:
What ROM do I need to run to make this work for me? thanks
Hello,
I am struggling to get the iPega Wireless Bluetooth 3.0 controller working on my emulators. I can pair the device through the Nibiru software which comes with it and it will play the games which you can get via google store. However if i try to pair the device via bluetooth without the nibiru software running it sees it but once you click on the device all i get is to enter a pin code, then it goes to incorrect password or pin and then the pairing fails. I have tried this on my galalxy note one and my girlfriends Galaxy Ace 2. There is no where to enter a pin on the phone and obviously not on the joystick side. What am I doing wrong been at it for 3 days now, going mad. Will someone talk me through the procedure step by step, any help appreciated.
http://forum.xda-developers.com/showthread.php?t=2033780&page=51
spellcaster1972 said:
Hello,
I am struggling to get the iPega Wireless Bluetooth 3.0 controller working on my emulators. I can pair the device through the Nibiru software which comes with it and it will play the games which you can get via google store. However if i try to pair the device via bluetooth without the nibiru software running it sees it but once you click on the device all i get is to enter a pin code, then it goes to incorrect password or pin and then the pairing fails. I have tried this on my galalxy note one and my girlfriends Galaxy Ace 2. There is no where to enter a pin on the phone and obviously not on the joystick side. What am I doing wrong been at it for 3 days now, going mad. Will someone talk me through the procedure step by step, any help appreciated.
Click to expand...
Click to collapse
I can also only use the ipega with nibiru. Very frustrating to when seeing all the YouTube videos explaining how well it works without it....
I have found this thread that might help. I will let you know of it works for me
Hello guys, I hope I can get some help over here.
When I received my galaxy tab pro 12.2, my galaxy tab pro 12.2 can't be connected to any usb device nor the pc's usb port. The last time I remember I plugged my tablet to the pc and transfered files to it was like 1 and a half months ago, then I updated my tablet, then last week (I had no need to connect my tablet to my pc until last week) I needed to transfer some files to my tablet but it didn't work, I don't get the typical sound Windows makes when you plug in a device, it doesn't appear on the device manager, I tried it on 3 different laptops and it still didnt work, on my tablet I only get a red cross on the battery sign at the top right of the screen, I tried to connect it also with an mlh adapter to the TV, and no success so far.
Has anybody else had that problem?
Hi, i tried to update my Wamo Pro controller(the software inside the controller, not the app). so i downloaded the updateprogram and started to update it, but it got stuck at 1% and wouldnt continue updating. so i cancelled update and wanted to start my controller again, and now its broken. the PC can identify the controller but i cant connect it to my smartphone, no lights blinking. Has anyone any idea how to fix it? Support just had chinese number and skype name. tried to write at skype but no answer