Hi, a friend have 2 pda universal from vodafone that he has flashed and killed. I don´t know what happend. pda always shows USB and v1.00. After a lots o rom updates still dead, i have JAFWM, but with or without this machine is dead.
any rom especial version?
any soft?
thanks.
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
device always start in bootloader mode, i flash all times without problems, but when i restart device, automatically puts on bootloader mode.
after flash, make factory settings but,after this, restart in same mode.
always, when i run update program soft MaUpgradeUt_noID, detects no rom in pocket loaded.
strange problem on 2 pda´s ?
thanks
That shouldn't be a problem. Just continue to flash the rom. There could be a problem with your bootloader and the upgrade version (AKU2) you want to use.
Maybe it's a problem with bootloader.
Try it, maybe it will help you.
http://forum.xda-developers.com/download.php?id=11414
i think same as you, only problem with ROM image, but i have flashed many roms but I can´t revive device. So i ask name of Rom tht can revive pda.
Br.
PD. how i can flash the archive attached?
The rar file mentioned above is only the bootloader you already got on your device.
In your case i would use an old AKU1 rom and to see if it works.
hi guys
i have same problem. show only boot loader mode. how to use this boot loader file. wich AKU1 file is working. my phone is MDA PRO from germany T-mobile, i wan't to update ro to English. after flashing many times, many rom no result. help me
thanks a lot
Hello Siemens Man
Which Bootloader do you have ?
It would be great if you could make an backup of your bootloader then, that i could downgrade my phone and try to unlock it.(If do not know how to make an backup, thats no problem, because i can show you how to do it)
greetz
hi man
i have in boot loader mode. show me usb v1.00 only. i don't have buck up for my phone. please tell me solution how repair my phone.
thanks a lot
Did you try to update your phone to the latest orange rom for testing yet ?
If not try it out (I know it is said to be slow, but only if all orange customizations are installed) If it runs then its ok.
Otherwise try to use the exitbl.exe mentioned somewhere in this forum, hopefully it works.
connect to mtty and issue set 14 0 and then restart the device or use exitbl utility by buzz
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
are there any useful hints extrem69 ?
no usb mode
What can i do of my Qtek 9000 doesen't change from Serial to USB mode?
siemens man said:
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
Click to expand...
Click to collapse
I had same problem like you, can you tell me what exactly did you do so you can repaire your phone.
I used T-mobie and didn't work after upgrade rom too, it's alway stop in boot loader screen. I tried up rom of T-mobile, Imate, Dopod but nothing to work, I don't know how to repair it, it's still can up rom normaly, nothing wrong while upgrade, it's only don't work after finish.
wooooooooooooooooooow
many thanks
i tried many ways to solve this problem
with your advuse it is working now.................
Lt.Cmdr.Ivan said:
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
Click to expand...
Click to collapse
HI to all! I have lost bootloader upgrading my qtek 9000 vodafone.
can i to solve problem? No bootloader menu, i have tried power+reset+lamp, power+reset+camera - herd reset with - + - reset without effect. Pse help me!!! Thanks.
Can anyone help me out i was trying to downloading a new software upgrade for my mda pro and the computer froze on me no the phone is stuck with the screen saying with no light on serial at the top of it and at the bottom it say v2.01 but when i put the usb cable in or charge it it says usb on the screen instead of serial.The programme crash and now i cant ger out of that screen ive just told u about.I can do i hard restet and the light goes on saying press 0 to restore factory default and press x to exit.
When i press 0 it just goes back to the 1st screen i jst told u abt.With no light on and cant get light on or do anything with it.HELP i think when the update crashed on me it crashed the phone to and just kept on that screen with the serial on it.ActiveSync will not work anymore when i put cable into the comptuer with my phone so updaing my phone agine will not work.Can anyone please point me in the right place to fix this promblem.Many thanx mono33
PS sorry it was so long winded but i needed to give you all the info possible i could give you.If there anything asle u need to know ust ask me and ill tell u what i can.Many thanx mono33
When to upgrade from bootloader, I guess you have to turn of your activesync, you can not allow activesync to use usb or download activesync toogle from: http://www.micrologics.co.uk/ (I use it to make use AS don't bother my prosses). And maybe the ROM file is broken?
Can anyone help me out i was trying to downloading a new software upgrade for my mda pro and the computer froze on me no the phone is stuck with the screen saying with no light on serial at the top of it and at the bottom it say v2.01 but when i put the usb cable in or charge it it says usb on the screen instead of serial.The programme crash and now i cant ger out of that screen ive just told u about.I can do i hard restet and the light goes on saying press 0 to restore factory default and press x to exit.
When i press 0 it just goes back to the 1st screen i jst told u abt.With no light on and cant get light on or do anything with it.HELP i think when the update crashed on me it crashed the phone to and just kept on that screen with the serial on it.ACTIVE Sink will not work anymore when i put cable into the comptuer with my phone so updaing my phone agine will not work.Can anyone please point me in the right place to fix this promblem.Many thanx mono33
PS sorry it was so long winded but i needed to give you all the info possible i could give you.If there anything asle u need to know ust ask me and ill tell u what i can.Many thanx mono33
If this software upgrade was ROM upgrade, you're stuck in the Bootloader - check out the answers in the wiki and in the Universal Upgrading thread.
mono33 said:
Can anyone help me out i was trying to downloading a new software upgrade for my mda pro and the computer froze on me no the phone is stuck with the screen saying with no light on serial at the top of it and at the bottom it say v2.01 but when i put the usb cable in or charge it it says usb on the screen instead of serial.The programme crash and now i cant ger out of that screen ive just told u about.I can do i hard restet and the light goes on saying press 0 to restore factory default and press x to exit.
When i press 0 it just goes back to the 1st screen i jst told u abt.With no light on and cant get light on or do anything with it.HELP i think when the update crashed on me it crashed the phone to and just kept on that screen with the serial on it.ACTIVE Sink will not work anymore when i put cable into the comptuer with my phone so updaing my phone agine will not work.Can anyone please point me in the right place to fix this promblem.Many thanx mono33
PS sorry it was so long winded but i needed to give you all the info possible i could give you.If there anything asle u need to know ust ask me and ill tell u what i can.Many thanx mono33
Click to expand...
Click to collapse
If you have reached the bootloader mode and the word 'serial' changes to 'USB', you are in luck. Only before you connect to PC for upgrade open Active Sync on the PC and go to File / Connection Setting and UNCHECK 'allow USB connection' Checkbox. Then connect your device and follow the upgrade procedure. Actually you have posted this in the wrong forum. This should have been in the upgrade forum. Upgrade is not difficult. Please do let us know if you require any further help.
ok here is the problem, i downloaded batterystatus and loaded a few option it asked for a soft restart so i let it be, soon as it get to the today screen it freezes, my activesyne wont connect to my phone it just stays frozen, is there another way to do a hard reset? or clear this issue please i really need help.
If it is freezing upon startup or when it reaches the Today Screen then frezes, you need o be able to boot the phone in safe mode (available in a few apps like SKTools, etc) which can bypass any startup applications that may cause interefence so that you an troubleshoot the problem. If you do not have one installed, find one. It will haelp out tremendously for events like this.
Does your phone freeze every time you soft reset? At the exact same place?
if the pda will not start up i dont think he can install the safe mode program
how hardreset is dont varies from device to device my advise if to look in the manual or look at XDA-WIki for info about how to do it on your device
I have a problem with my Tmobile MDAIII compact.
It dropped on the floor last week, the battery fell out and everything.. and after that it just hangs in the windows bootscreen.
Opened it up to see if there was any visible damage inside, but found nothing.
When I turn it on the screen shows:
IPL 1.12.0001
SPL 1.11.0001
GSM 03.21.90
OS 3.7.0.0
then it gos to the windows mobile splah/bootscreen
I have the PDAviet black and blue v4.0 touch ROM on it..
sof reset doesn;t work, it will just get stuck in the bootscreen again. if you touch a button it lights up the screen and keyboard, but even that stops responding afer a couple of minutes.
a hard reset is not an option right now cause I can't afford to lose my contacts and notes
flashing is not an option for the same reason.
had anyone here got any idea how to get this working again without a hard reset or a new flash..
I read that you can do more harm then good if you just use some commands you find, cause every bootloader has different commands so I carefully tried some MTTY commands in the bootloader, but in the end it didn't do anything. good or bad..
Is there a way to see where it hangs or gets stuck through some output console with MTTY or something? or get the contactlist out of it or the notes..
I SO cannot afford to lose my contacts or the notes in the damned thing. ( yes, I all hear you say " you should've backed up then!!" but hindsight is always 20-20 )
is it bootLOOPING or is it just hanging on the bootscreen?
if it's bootlooping try removing your SD card and then soft resetting
if it's hanging, your guess is as good as mine
It's hanging in that bootscreen/PDAVIET splash, it's not looping.. it just sits there mocking me..
There is no SD card present and no SIM either and if I insert those, it doesn't change a thing about its behaviour, it still hangs..
124 views and no one knows anything? no small clue, no tip, no nothing?
I think it's just broken.
The only option you can try I see is a hard reset. To bad you haven't made a backup or something on your computer. Lesson for the next time, if you contacts and notes are that important, Make a daily backup!!!