Develop Bugs

P l s h e l p ! ! !

hello... why i cant access internal sd card after flash?
it says "no sd card inserted" when i want open "my files"

You flashed with your SD in?
Sent from my GT-I8150 using XDA App

With rom did you flash?
Sent from my GT-I8150

Go to recovery (Vol UP + Power + Home) then wipe data and cache or do factory reset
After that flash it again

sorry all for quiet a few days...
i flash with no sd card insert...
flash with cowthgun slim shady...
after a few days keep try n error now my sgw cant turn on...
even when i put charger oso nothing out on screen...

that's sound like a hard-like a **** brick man..
Maybe it caused by sd swap(vold.stab) thing that apply on that rom..and then u flashed with no extrnal-sd inside..that causes havoc.!
If u want unbrick DIY style..google this;usb jig
If u don't want get ur hands dirty,service centre..
Gud luck..
Sent from another space

jahlee said:
that's sound like a hard-like a **** brick man..
Maybe it caused by sd swap(vold.stab) thing that apply on that rom..and then u flashed with no extrnal-sd inside..that causes havoc.!
If u want unbrick DIY style..google this;usb jig
If u don't want get ur hands dirty,service centre..
Gud luck..
Sent from another space
Click to expand...
Click to collapse
brick??? oh no...
flash with cowithgun slim shady is working actually...
then after i notice that i cant access my files (it says 'no sd card inserted'),
then only i try n error using swap,mount n unmount using root toolkit...
after nothing happen n i really tense with it,i off my fon...
BANGGGG,my sgw cant turn ON already... until today...
its because of whatar actually?
im just use 2 weeks... i suspect its because overheat cause at the cover area camera its like got a buble there... or its because software problem? cause i wanna claim a warranty by SME... but need to wait until next (now close 1 week for Chinese New Year).
am i possible to claim warranty if its caused by software?
thats the point.. if they can detect its my problem,is there any warranty?
but im strongly trust that my fon is overheat cause got a bubble at camera area near to micro-usb port...
P/s : back to b4,im use a thether to connect to internet while im doing my rooting,flashing...
b4 that,i'

cairo87 said:
am i possible to claim warranty if its caused by software?
thats the point.. if they can detect its my problem,is there any warranty?
but im strongly trust that my fon is overheat cause got a bubble at camera area near to micro-usb port...
Click to expand...
Click to collapse
If it would have been the software of Samsung(stock rom), which would have caused the overheat, you would have been on the safe side.
But because you were using a custom ROM, which even provides overclocking, which most probably caused the overheating and bubble, you actually don't have any warranty left. You can just try to send your phone to Samsung and if you are lucky they won't find out you were flashing custom ROMs and they might replace it.
BTW: A Topic with the name "Plshelp" is not very useful. If everybody would do that, this forum would be a mess. So next time think about a topic which expresses the problem. If you could change the name of your topic it would be good.
good luck
THE-E

THE-E said:
If it would have been the software of Samsung(stock rom), which would have caused the overheat, you would have been on the safe side.
But because you were using a custom ROM, which even provides overclocking, which most probably caused the overheating and bubble, you actually don't have any warranty left. You can just try to send your phone to Samsung and if you are lucky they won't find out you were flashing custom ROMs and they might replace it.
BTW: A Topic with the name "Plshelp" is not very useful. If everybody would do that, this forum would be a mess. So next time think about a topic which expresses the problem. If you could change the name of your topic it would be good.
good luck
THE-E
Click to expand...
Click to collapse
ok... hope they wont find out why my fon become like this...
hope they just replace it...huhuhu...
btw,thx 4 da advice...^^

cairo87 said:
ok... hope they wont find out why my fon become like this...
hope they just replace it...huhuhu...
btw,thx 4 da advice...^^
Click to expand...
Click to collapse
Yeah..I wish u luck man...
I once bricked my phone too..a sgs..but not because of overheating,but flashed a wrong rom..
I send it to service centre and they ask me how its happen..i'm just telling that "I don't know anything about that ****.."after 4 weeks of miserable waiting they finally call..
They said,its caused by mainboard failure and replace it by a new one..haha..I'm just lough in their back..they dont find out that I rooted my device and mess it up..
Good luck bro..
Sent from another space

jahlee said:
Yeah..I wish u luck man...
I once bricked my phone too..a sgs..but not because of overheating,but flashed a wrong rom..
I send it to service centre and they ask me how its happen..i'm just telling that "I don't know anything about that ****.."after 4 weeks of miserable waiting they finally call..
They said,its caused by mainboard failure and replace it by a new one..haha..I'm just lough in their back..they dont find out that I rooted my device and mess it up..
Good luck bro..
Sent from another space
Click to expand...
Click to collapse
sorry all...
my mistake...
its not becoz of overheating...
i tot there is bubble.. no,its not... its juz a design...
sorry again...
i think its because software problem cause of i keep try n error use mount n umnount in root toolkit...
my battery is ok...(test with another sgw)
now plan to go to SME on this wednesday...
hope i got luck as u bro...^^
if not,i dunno how to do...
maybe try USB jig?

[Q] My Wonder GT-I8150 hardbrick

Guys, sorry to bother all of you. I just want to ask about my HARDBRICK Galaxy Wonder GT-I8150.
All this happen because I try to apply swap partition on my device, and hope it would give extra RAM. Used my 16Gb class 10 sdcard and give about 1Gb for linux swap partition using Minitool Partition, and then install "swapper2" to activated it just like tutorial. Test it with "terminal emulator" and nothing happen, seems my swap partition wont loaded or whatever. In swapper2 menu there is option like "apply on boot" and I choose it (hopefully it need to be restarted and apply on boot to make it work).
I turned off my phone, let it for a while........turn it on again and booyyaaahhh. Suddenly wont turn on, put it on wall charger and wont even charged..... I tried "3 button combos-one click unbrick for several times and nothing can help. Please if anyone could help me. Thanks Guys
PS : Sorry for my bad english.

kasarung21 said:
Guys, sorry to bother all of you. I just want to ask about my HARDBRICK Galaxy Wonder GT-I8150.
All this happen because I try to apply swap partition on my device, and hope it would give extra RAM. Used my 16Gb class 10 sdcard and give about 1Gb for linux swap partition using Minitool Partition, and then install "swapper2" to activated it just like tutorial. Test it with "terminal emulator" and nothing happen, seems my swap partition wont loaded or whatever. In swapper2 menu there is option like "apply on boot" and I choose it (hopefully it need to be restarted and apply on boot to make it work).
I turned off my phone, let it for a while........turn it on again and booyyaaahhh. Suddenly wont turn on, put it on wall charger and wont even charged..... I tried "3 button combos-one click unbrick for several times and nothing can help. Please if anyone could help me. Thanks Guys
PS : Sorry for my bad english.
Click to expand...
Click to collapse
go to samsung services.

kasarung21 said:
Guys, sorry to bother all of you. I just want to ask about my HARDBRICK Galaxy Wonder GT-I8150.
All this happen because I try to apply swap partition on my device, and hope it would give extra RAM. Used my 16Gb class 10 sdcard and give about 1Gb for linux swap partition using Minitool Partition, and then install "swapper2" to activated it just like tutorial. Test it with "terminal emulator" and nothing happen, seems my swap partition wont loaded or whatever. In swapper2 menu there is option like "apply on boot" and I choose it (hopefully it need to be restarted and apply on boot to make it work).
I turned off my phone, let it for a while........turn it on again and booyyaaahhh. Suddenly wont turn on, put it on wall charger and wont even charged..... I tried "3 button combos-one click unbrick for several times and nothing can help. Please if anyone could help me. Thanks Guys
PS : Sorry for my bad english.
Click to expand...
Click to collapse
seems like a hard-bricked case.

Qhsusb_dload
doles said:
go to samsung services.
Click to expand...
Click to collapse
no offense, but I prefer to use this option at the last.
yewsiong said:
seems like a hard-bricked case.
Click to expand...
Click to collapse
Yeah, it seems hard-bricked case. But lately when I used one click-unbricked I was able to install my devices as "QHSUSB_DLOAD", and now I tried to make my PC recognize my device through QPST....hopefully will detect as COM PORT and can flash it with Odin.

wow even applying swap can hard brick a device, well swap is kernel dependant, only kernel in our device whom support swap partition is cow's kernel.

Support Kernel
-storm- said:
wow even applying swap can hard brick a device, well swap is kernel dependant, only kernel in our device whom support swap partition is cow's kernel.
Click to expand...
Click to collapse
Hahaha............ the funny part is, I was plan to push Cow kernel to my kedai.XXLM8 (deodexed ROM) after swap partition. **** happen, . Better use customrom just like I ever done.
Still no one could help me here I think??? Maybe this weekend I'll go to SSC (Samsung Service Center). Thx All

Same experiment. I think someone in this forum can back up xml files using QPST and upload it so we can recover. If u had any solution please note me..

hakanbilir said:
Same experiment. I think someone in this forum can back up xml files using QPST and upload it so we can recover. If u had any solution please note me..
Click to expand...
Click to collapse
Can you give the link how to backup xml file using QPST? Maybe another user can uploaded to you. Sorry i can't help. Coz i'm newbie
Sent from my GT-I8150 using xda app-developers app

watch this video, how to unbrick ur phone....may help u.
http://www.youtube.com/watch?v=Rdn5GoRjhn0
once activated download mode, use odin n flash stock rom.
goodluck.

kyoshiro67 said:
Can you give the link how to backup xml file using QPST? Maybe another user can uploaded to you. Sorry i can't help. Coz i'm newbie
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Checkout this
http://forum.xda-developers.com/showthread.php?t=2208289
---------- Post added at 11:23 PM ---------- Previous post was at 10:54 PM ----------
hakanbilir said:
Checkout this
http://forum.xda-developers.com/showthread.php?t=2208289
Click to expand...
Click to collapse
Thank you for your reply.
I have my phone bricked. Swapper2 wiped my system partitions. I can't effort to buy jig or jtag here. They are expensive in Turkey.
With Quallcomm Product Support Tool required partitions can be reprogrammed.
There are some projects on this issue but for other phones.
We could do the same. But i dont know enough information. I just have a dead phone.
We can create a debricking tutorial for all i8150 users. In this approach no jig cable needed. Just plug your device to computer. With quallcomm hs driver it connects to com port. Quallcomm Support Tool and Odin detects your phone. You can reprogram required partitions with some knowledge and required files.

Solved.
Fixed motherboard with memory replacement. 40$

hakanbilir said:
Solved.
Fixed motherboard with memory replacement. 40$
Click to expand...
Click to collapse
where did you buy this component?

Redwraith96 said:
where did you buy this component?
Click to expand...
Click to collapse
I dont know. An unoffical samsung service fixed my phone. He didnt replace the motherboard. But it works right know. The ones before tryed jtag but they couldt.

thanks for the answer

[Q] Hard bricked S4 mini GT-I9195

Hi fellows S4 mini owners and the Android developers,
I just bought S4 Mini GT-I9195 LTE as present for my daughter and it came with the latest firmware XXUBMJ7 and with KNOX and I rooted it following this thread: http://forum.xda-developers.com/showthread.php?t=2364980 and everything went well.
So, I got rooted S4 mini with CWM Recovery on stock kernel and in Knox everything was changed to Custom and Knox was showing 0x1.
I have partitioned 16 Gb SDHC class 10 micro card with MiniTool Partition Wizard Professional Edition with next partitions:
First partition: 12 Gb FAT32 (unchanged) Primary
Second partition: 2 GB Ext4 Primary
Third partition: 512 mb Swap Primary
I have installed Link2SD to try if it should work with second Ext4 partition and it wiould work for the moment and it would link all removable apps to the second partition but with next boot it would get all force closed (FC's) messages about this moved apps.
I did a factory reset from CWM Recovery and I tried all again but now I changed in Link2SD options to link apps but without automatic linking apps to second partition and it seemed to work and It only moved one part of installed apps to second partition with no more FC's after the reboot.
Now after that I wanted to get SWAP partition working and I have installed "Swapper2 for root" and I have choose in options to use Swap partition and it took third partition mmcbklp03 as Swap partition (and I think that here went wrong but I'm not sure) and I remember that there was option in Swapper2 to always format SWAP partition on the boot.and it was chacked.
I have swiched on Swapper2 and at first instance it faild to find SWAP partition, then I tried once again and it succeed to swich on swap, to format swap partition and to make swap.
I have restarted a phone several times after installing few other applications and it all went good. After few hours of installing of the new apps and testing them the battery draind out to one percent (1%) and I just wanted to leave it to charge with phone swiched off, because it's better for the battery. I didnt use the original Samsung charger but I have used USB 3.0 on my laptop and what I have noticed that it took to long to charge more then six hours to charge it to 100%. The next time when I tried to swich on the phone it was impossible. It wouldn't go to any mode, just black screen but if it is connected to the PC it gives a sound that there is a divece on that USB port.
With or without battery it just give a sound that it means that PC can see "something" but if I try with Odin it doesn't show at all on any com to be seen.
I took the phone to the friend of mine (he is a phone reseller and he has many different software to revive a lot of different phones and only Riff Box can see my phone on "com 163" ) but I didn't want to soldier it and to flash it because I still have the warrenty as the phone is only few weeks old.
My question is: What could be a reason of the hard brick ?
Was it Swapper2, maybe, because it has formated the wrong partition ? Or something else ?
And should I use the swap partition at all, next time, knowing that this phone has 1.5 Gb of working RAM ?
What is your expiriance and conclusions ?
Edit: I just plugged the phone on the other laptop with Windows 7 and it showed to install new drivers. As first it could not recognize a device, after that it has installed HID drivers and at least it didn't succeed to install QHSUSB_DLOAD drivers.
Any idea ?
Thanks in advance !

In case you end up needing a last resort, these guys are great!
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s4-mini-jtag-brick-repair/
(fixed my hard brick)

You can read this links also:
http://forum.xda-developers.com/showpost.php?p=49357496&postcount=38

Thanks to both of you, but I don't get it where can I get debrick.img for Samsung S4 mini and if can I use a kind of "T999_Partial_Sys_Dump_for_debrick.zip" but then for S4 mini and is there something like this at all at the moment ?
Greetz !

Boombastical said:
Thanks to both of you, but I don't get it where can I get debrick.img for Samsung S4 mini and if can I use a kind of "T999_Partial_Sys_Dump_for_debrick.zip" but then for S4 mini and is there something like this at all at the moment ?
Greetz !
Click to expand...
Click to collapse
I will make it to You. The .zip file work well because it work only whit the pit.file that is on partition mmcblk0, same on both devices.
Like for Mega I9205 I rename it to "I9195_Partial_Sys_Dump_for_debrick.zip". Wait.

You have here the debrick.img.tar whit debrick.img. I hope this help You:
https://meocloud.pt/link/5c9646e0-1ff8-41a8-b785-d85a0acd7f8b/debrick.img.tar/
Good luck

ValenteL said:
You have here the debrick.img.tar whit debrick.img. I hope this help You:
https://meocloud.pt/link/5c9646e0-1ff8-41a8-b785-d85a0acd7f8b/debrick.img.tar/
Good luck
Click to expand...
Click to collapse
Anyway you or anyone can can help with the i435 vzw s4mini?
I have a few .img files like boot and recovery i think system too
I need a debrick file and whatever else.. Not really sure
Stuck in qhsusb mode

www.sammobile.com/firmwares. Download you appropriate firmware. Download Odin. Click PDA on Odin . click downloaded firmware. Flash it
Done
Sent from my Nexus 4 using XDA Premium HD app

balarishinoob said:
www.sammobile.com/firmwares. Download you appropriate firmware. Download Odin. Click PDA on Odin . click downloaded firmware. Flash it
Done
Sent from my Nexus 4 using XDA Premium HD app
Click to expand...
Click to collapse
do you see sch-i435 there? I dont. Not trying to be all smart but i wish it were so simple.. lol pls anyone?

justlovejoy said:
do you see sch-i435 there? I dont. Not trying to be all smart but i wish it were so simple.. lol pls anyone?
Click to expand...
Click to collapse
Then cyanogen will do the job. that's the only option. U have
Sent from my Nexus 4 using XDA Premium HD app

balarishinoob said:
Then cyanogen will do the job. that's the only option. U have
Sent from my Nexus 4 using XDA Premium HD app
Click to expand...
Click to collapse
To get UN bricked?
Sent from my XT907 using Tapatalk

justlovejoy said:
To get UN bricked?
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
Any new ROM will unbrick (common sense)
Sent from my Nexus 4 using XDA Premium HD app

Lmao.. Common sense will say, I'm not arguing. Great idea but hard bricks aren't treated the same as soft bricks. Thank you tho
Sent from my XT907 using Tapatalk

Returned Fixed S4 mini
justlovejoy said:
Lmao.. Common sense will say, I'm not arguing. Great idea but hard bricks aren't treated the same as soft bricks. Thank you tho
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
Hi to all !!!
The phone is back from the repair service and it's "fixed", acctually they changed the whole motherboard and they didn't want even to examine what the problem was, what I think is a bit sad.
It was probably just the few partitions that were messed up and they just could reflash it with a JTAG or thier other advanced hardware, but it was "easyer" to just swich a motherboard and now I get again new 4.2.2 with KNOX loader and december update...
So here we go again, I will root it again but I we'll avoid this time Swapper2, or if somone know's the right adress from where bigins the swap partition if I use 32 Gb SD micro partitioned to 26 Gb FAT 32 and 4 Gb Ext4 and 512 mb swap. Which mmcblk will be swap then ?
Or should I even use swap partition with S4 mini if we know that 1.5 Gb RAM should be enough for 4.2.2 ?
Thanks in advance !
Greetings !

Hi ValenteL,
Sorry that I wasn't here for a long time but I was busy with my study and I see that you made the .img file but I already send it to repair center and if read my last post you can see what happened.
I'm really sorry that I didn't test it before I send it to them because they where brute as always and they even didn't look what was the problem.
I mean, it's good for me but it wasn't neccesery to waste a hardware which was good but is much quicker to replce it then to flash it again...
I hope that your file can help to someone else who has a same problem as I had.
I'll take your file for the future experiments, or can you explain how can I make my own .img file if I'm not rooted yet ?
Thanks in advance.
Greetz !

Is this .img file still available?
ValenteL said:
You have here the debrick.img.tar whit debrick.img. I hope this help You:
https://meocloud.pt/link/5c9646e0-1ff8-41a8-b785-d85a0acd7f8b/debrick.img.tar/
Good luck
Click to expand...
Click to collapse
Is this .img file still available? The download link above no longer works. Actually, I'm not really sure it's what I need, but I'm willing to take a chance. I'm searching for a bin dump of mmcblk0 of an I9195T (Australian model), but at this point I'd take a I9195 on the outside chance it might work. Please see my original post in the troubleshooting area: http://forum.xda-developers.com/galaxy-s4-mini/help/i9195t-dump-200mb-replaced-emmc-t2880434.
Thanks in advance!

ValenteL said:
You have here the debrick.img.tar whit debrick.img. I hope this help You:
https://meocloud.pt/link/5c9646e0-1ff8-41a8-b785-d85a0acd7f8b/debrick.img.tar/
Good luck
Click to expand...
Click to collapse
Hi, Do you happen to have a new link for the I9195 debrick.img.tar as your download link has expired?
Thanks

Can you make for me an image of sph l520 ? Thanks.

ValenteL said:
You have here the debrick.img.tar whit debrick.img. I hope this help You:
https://meocloud.pt/link/5c9646e0-1ff8-41a8-b785-d85a0acd7f8b/debrick.img.tar/
Good luck
Click to expand...
Click to collapse
Hello, do you have a GT-I9195 4.4.2 PIT file that i could have to fix my phone. Thanks in advance

I need debrick.img for i9195 please.

Soft brick when trying to root

Hi, folks
I was using this procedure to root my Note 3 Neo SM-N750
http://androidxda.com/root-samsung-galaxy-note-3-neo-sm-n750
But when I started flashing with Odin, it got stuck at writing Cache.img and screen when black with lots of coloured dots. Please see attached file for odin error screenshot.
Now it says I have to recover with Kies when powering up the phone.
Please advise.

i also faced the same long time ago u must be rooting ur device 2nd time.. be this only happen at 2nd time root on a new phone 1st time root it works totally fine.. bt if u flash stock.. rom and than again you try to root than it stuck... than u will c some gots lime video games... and phone gets heated.. than u hav 2 pull out battery .. bro when this thing happend 2 me.. my phone was just 2 days old so i went to service center to DO my phone means replacment i got a new phone... bt am sure.. dis will happen 2 this phone also.. bt am nt gonna do d same thing again flashing a stock rom than try 2 root again.. bt aftee facing that issue i did little reserch.. and found d resion.. why it stuck.. its may b bec of partation size.. of cache try flash your stock rom.. go to recovery.. wipe ur cache partation.. and try again.. bec if that will mt fix this than there is only 1 thing which can fix dis that.. is flashing the fresh rom.. with pit and all other files.. nt just one package file bec pit file os the only way 2 repartation your mobile and wipe everything back 2 factory ... bt on o9 there is no leak of that firmware bec mostly that all files service center ppl having... and o9 u will get a kies extracted 1 package file.. that cannot repair ur phone it can just restore all d files.. bak to normal... try wipe ur cache partation... or u can also try firmware of another country.. than try 2 root.. any ways good luck...
Sent from my SM-N750 using XDA Premium 4 mobile app

sgatechwork said:
i also faced the same long time ago u must be rooting ur device 2nd time.. be this only happen at 2nd time root on a new phone 1st time root it works totally fine.. bt if u flash stock.. rom and than again you try to root than it stuck... than u will c some gots lime video games... and phone gets heated.. than u hav 2 pull out battery .. bro when this thing happend 2 me.. my phone was just 2 days old so i went to service center to DO my phone means replacment i got a new phone... bt am sure.. dis will happen 2 this phone also.. bt am nt gonna do d same thing again flashing a stock rom than try 2 root again.. bt aftee facing that issue i did little reserch.. and found d resion.. why it stuck.. its may b bec of partation size.. of cache try flash your stock rom.. go to recovery.. wipe ur cache partation.. and try again.. bec if that will mt fix this than there is only 1 thing which can fix dis that.. is flashing the fresh rom.. with pit and all other files.. nt just one package file bec pit file os the only way 2 repartation your mobile and wipe everything back 2 factory ... bt on o9 there is no leak of that firmware bec mostly that all files service center ppl having... and o9 u will get a kies extracted 1 package file.. that cannot repair ur phone it can just restore all d files.. bak to normal... try wipe ur cache partation... or u can also try firmware of another country.. than try 2 root.. any ways good luck...
Sent from my SM-N750 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Strange. I pulled the batt and retry flashing same procedure and file and it worked! Glad else will be sad bricking the device on day and can't claim warranty since tripping Knox.

it worked its good but most of the it dosent work

How can it sometimes work and sometimes doesn't? It means that this sw is unstable that's all.
Btw, after a month with my 7505 i think it was a mistake getting it, its worth adding this 100$ and get a phone that runs kitlat.
This 4.3 android is just not as good
Sent from my SM-N7505 using Tapatalk

ron1999 said:
How can it sometimes work and sometimes doesn't? It means that this sw is unstable that's all.
Btw, after a month with my 7505 i think it was a mistake getting it, its worth adding this 100$ and get a phone that runs kitlat.
This 4.3 android is just not as good
Sent from my SM-N7505 using Tapatalk
Click to expand...
Click to collapse
its depending on d issue which ur facing and d way and process how ur doing thinga depending upon that issues comes out.. and ya.. these flasing issue.. n all ntn to do wid OS even its jb or kk the basics r always same wid all android devices.. 4.4 just a next version of 4.3
Sent from my SM-N750 using XDA Premium 4 mobile app

I could not understand a word
Any chance for another message in English?
(I'm guess I'm not updated with all the shortcuts u used)
Sent from my SM-N7505 using Tapatalk

ron1999 said:
How can it sometimes work and sometimes doesn't? It means that this sw is unstable that's all.
Btw, after a month with my 7505 i think it was a mistake getting it, its worth adding this 100$ and get a phone that runs kitlat.
This 4.3 android is just not as good
Sent from my SM-N7505 using Tapatalk
Click to expand...
Click to collapse
I don't know why it didn't work the first time. I have had Samsung phones and rooted and flashed then since S1. So I know how Odin suppose to work. Else I wouldn't have flashed it one first day.
So this is one of those exceptions where I was stumped at least for 15 kind what when wrong.
Anyways .. All good now. As they always say use at your own risk.
Sent from my SM-N750 using XDA Free mobile app

i have bricked my n750
i have rooted 3 handset one is working fine but other too on boot loop ..............try to flash with diffrent files but stuck on sboot file................................guide me

helpdesk.raman said:
i have rooted 3 handset one is working fine but other too on boot loop ..............try to flash with diffrent files but stuck on sboot file................................guide me
Click to expand...
Click to collapse
You have to provide complete information...

s boot fail
KSKHH said:
You have to provide complete information...
Click to expand...
Click to collapse
i have rooted 3 n750 note 3 neo
2 of then in boot loop
try to flash with one package file and four files from asansam support , ufs support and samfirmware
but failed on sboot
flshed with four files and skipped boot file flash complete but phone on samsung logo
hard reset done
any method to update bye adb , cwm or sidelog.......................

Problem with storage

using micromax a1 past 1 month and this is the only issue i have ..... randomly at times im not able to write data on micro sd card ..... means not able to store clicked pictures , delete/edit content , download content from whatsapp etc , worst part is that it happens without any warning or notification , due to which i lose many pics thinking that i have clicked them but not .... when i open quickpic ( gallery app ) it shows toast notification - "not an error (code 0): could not open the database in read/write mode" , googled the error and found that it is an issue in kitkat , btw im using everything stock ,locked bootloader , non-rooted . i didn't find any proper solution to this.
Any help ?
P.S - problem disappears after a reboot but again comes back after few hours , tried resetting sd card ..... works fine in othe mobile/PC ....

sherrymalhi said:
using micromax a1 past 1 month and this is the only issue i have ..... randomly at times im not able to write data on micro sd card ..... means not able to store clicked pictures , delete/edit content , download content from whatsapp etc , worst part is that it happens without any warning or notification , due to which i lose many pics thinking that i have clicked them but not .... when i open quickpic ( gallery app ) it shows toast notification - "not an error (code 0): could not open the database in read/write mode" , googled the error and found that it is an issue in kitkat , btw im using everything stock ,locked bootloader , non-rooted . i didn't find any proper solution to this.
Any help ?
P.S - problem disappears after a reboot but again comes back after few hours , tried resetting sd card ..... works fine in othe mobile/PC ....
Click to expand...
Click to collapse
tried factory reset ?

habeebrizwan said:
tried factory reset ?
Click to expand...
Click to collapse
yup that too ( i forgot to mention) ...

sherrymalhi said:
yup that too ( i forgot to mention) ...
Click to expand...
Click to collapse
I recommend you to flash it, may be it will fix your problem

habeebrizwan said:
I recommend you to flash it, may be it will fix your problem
Click to expand...
Click to collapse
sorry but i didn't understood .... u mean flash custom rom ? but im waiting for official lollipop update

sherrymalhi said:
sorry but i didn't understood .... u mean flash custom rom ? but im waiting for official lollipop update
Click to expand...
Click to collapse
Nope, said to flash you with stock rom using sp flash tool, lollipop update will be in the last week of January

habeebrizwan said:
Nope, said to flash you with stock rom using sp flash tool, lollipop update will be in the last week of January
Click to expand...
Click to collapse
is bootloader needed to be unlocked to use sp flash tool ?if thats so , then i will wait for cm12 beta 2 , why to go with inferior rom ....

sherrymalhi said:
is bootloader needed to be unlocked to use sp flash tool ?if thats so , then i will wait for cm12 beta 2 , why to go with inferior rom ....
Click to expand...
Click to collapse
I guess you dont need to unlock

habeebrizwan said:
I guess you dont need to unlock
Click to expand...
Click to collapse
ok then ... any link for tutorial? ..... thanks bro for ur efforts

sherrymalhi said:
ok then ... any link for tutorial? ..... thanks bro for ur efforts
Click to expand...
Click to collapse
make sure you have the reuqired drivers installed, just see youtube tutorials, you will get an idea on in this A1 forum, hit thanks if i helped you

I have the exact same problems and i tried using diffrent sd cards but its no use. I know lollipop will fix this issue because google said its bringing back support for sd cards in android 5. Till then i dont know how i can fix this issue. Btw i am on ART runtime . is that causing this problem or will flashing another stock rom work ? Please help.

SD Card Issue
My friend had the same issue with his A1, and I being his "go to guy", I did factory reset, factory reset from recovery mode, installed stock rom again but none of this worked. Finally, i replaced his SD card with mine and tried to click a photo and voila it worked. So morale of the story, buy a new SD card.