[HELP] get stucked at sgt3 after wiping data - Galaxy Tab 3 Q&A, Help & Troubleshooting

Somebody help! after I root my tab 3, and I back up my files using TWRP Recovery, I did wiped data after that I shutdown the tablet and a message appear that says I have no OS and my device is not rooted "do you want to install superSU? I choose do not install and it shutdown, and when Im turning it on it always stuck at SAMSUNG TAB 3 logo when I do TWRP Recovery and check restore, there is nothing on it

Sounds like you did a full wipe and didn't install a new rom. Do the default wipe install new rom; try again

kindlefire39 said:
Sounds like you did a full wipe and didn't install a new rom. Do the default wipe install new rom; try again
Click to expand...
Click to collapse
What should I do? How about if i flash a new firmware? Pls do tell me the procedure

julz3093 said:
What should I do? How about if i flash a new firmware? Pls do tell me the procedure
Click to expand...
Click to collapse
download the firmware from sammobile.
flash the firmware with Odin
take a look on this video from TOMSGT.and you can follow the steps
http://forum.xda-developers.com/showthread.php?t=2459817 unbrick and restore sgt3 http://www.youtube.com/watch?v=M45u5I1dr4Y&feature=youtu.be

Related

[Q] Stuck on Android Logo

Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.
pranjaldixit said:
Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.
Click to expand...
Click to collapse
Before installing make backup wipe dalvik cache , cache, do factory reset and try again .. hope it helps
Sent from my Hero using xda premium
Actually I tell the whole story now. When I was making backup of my stock ROM the sd card showed low on space. So I removed that SD card and inserted the one which came with the Phone. On that I installed all the required zip files. Then I made backup of the stock ROM and the data. After that I followed these steps mentioned here -:
http://forum.xda-developers.com/showthread.php?t=1863260
According to the steps I did not did wipe davik cache etc. after instaling the ROM I did wipe factory and data reset and wipe cache partition. After following all the steps mentioned I rebooted my phone as mentioned. But after rebooting the phone is stuck on android logo. I then again went into recovery and tried to wipe dalvik cache the confirmation page that appears before wiping anything is not coming. Also when I tried to restore my phone to the stock ROM an error message is coming. So I am not able to restore to the stock ROM. This is the whole thing. So guys please help. I hope I have not bricked my phone. Any solutions?
Thanks
As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Mate I used latest version of ClockWork Mod to install the ROM.
pranjaldixit said:
Mate I used latest version of ClockWork Mod to install the ROM.
Click to expand...
Click to collapse
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.
pranjaldixit said:
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.
Click to expand...
Click to collapse
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.
pranjaldixit said:
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.
Click to expand...
Click to collapse
I suggest that you flash your phone to stock rom again via odin..
Then change your recovery,i was preffered px-cwmV2,but i dont know is the link still alive or not..
Flash the recovery,reboot..
Then enter recovery mode again,install rom..
Sent from my GT-S5660 using Tapatalk 2
How to do flash stock ROM as the backup that I made is not working properly.
pranjaldixit said:
How to do flash stock ROM as the backup that I made is not working properly.
Click to expand...
Click to collapse
With odin,
Search ! there are allot of guide howto flash gio to stock with odin
Sent from my HTC Hero using xda app-developers app
If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.
phreak_or said:
If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.
Click to expand...
Click to collapse
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.
pranjaldixit said:
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.
Click to expand...
Click to collapse
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!
phreak_or said:
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!
Click to expand...
Click to collapse
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks
pranjaldixit said:
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks
Click to expand...
Click to collapse
yes
And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks
pranjaldixit said:
And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks
Click to expand...
Click to collapse
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed
voetbalremco said:
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed
Click to expand...
Click to collapse
I am not installing firmware right now. I am just wanting to install CWM v2 and try whether it is able to install MIUI successfully or not. If this one also fails then I will install the firmwares via odin. Hope you ate able to understand what I am saying. Please help.

[Q]How to install custom rom without softbrick

Hello members,i have a problem . I bought a samsung galaxy tab 3 7.0 wifi (SM-T210) last week and i have rooted it + installed cwm and after i flash anything(custom lock screen or custom rom) the tablet gets soft bricked and the rom dont boot anymore,it enters automaticaly in cwm. So how can i fix it?
d0vada said:
Hello members,i have a problem . I bought a samsung galaxy tab 3 7.0 wifi (SM-T210) last week and i have rooted it + installed cwm and after i flash anything(custom lock screen or custom rom) the tablet gets soft bricked and the rom dont boot anymore,it enters automaticaly in cwm. So how can i fix it?
Click to expand...
Click to collapse
Which recovery Version you are flashed on your tab?
And which root.zip you are used?
Flash Stockrom and try it again.
bierma32 said:
Which recovery Version you are flashed on your tab?
And which root.zip you are used?
Flash Stockrom and try it again.
Click to expand...
Click to collapse
Im using the latest TWRP recovery 2.7.0.0 and for root i use a zip called universal root armeabi *smth like that*
I allready flashed the stockrom 3 times and i got the same result. also im using the T210XXANC2 firmware.
In CWM, wipe data and factory reset. Then go to Download mode, use Odin and flash your stock rom. That should do it.
paranoidmarvin42 said:
In CWM, wipe data and factory reset. Then go to Download mode, use Odin and flash your stock rom. That should do it.
Click to expand...
Click to collapse
i have rooted stock rom running with latest twrp but if i flash a custom rom it wont boot anymore, it gets softbricked but i dont know why.
d0vada said:
i have rooted stock rom running with latest twrp but if i flash a custom rom it wont boot anymore, it gets softbricked but i dont know why.
Click to expand...
Click to collapse
What ROM are you trying to flash? You must have missed a step. Make sure you read the instructions carefully before doing anything and use a custom rom for your device. Try again. I'm also new to Android and has softbricked my tab a couple of times now.
Go back to stock. Let your device boot completely. Install recovery again. Reboot again.
To make it easier, how about watching a video so you can see how it's done properly? It helped me a lot. http://forum.xda-developers.com/showthread.php?t=2459817
Good luck.
paranoidmarvin42 said:
What ROM are you trying to flash? You must have missed a step. Make sure you read the instructions carefully before doing anything and use a custom rom for your device. Try again. I'm also new to Android and has softbricked my tab a couple of times now.
Go back to stock. Let your device boot completely. Install recovery again. Reboot again.
To make it easier, how about watching a video so you can see how it's done properly? It helped me a lot. http://forum.xda-developers.com/showthread.php?t=2459817
Good luck.
Click to expand...
Click to collapse
I want to flash seal rom. also, thanks for the links, i will check them later.
d0vada said:
I want to flash seal rom. also, thanks for the links, i will check them later.
Click to expand...
Click to collapse
Plesse,dont use TWRP , i prefere CWM or PhilzTouch,why : alot of user are have postet probs when they used TWRP.
Also i prefere after rooting The Blackhawk Kernel.
bierma32 said:
Plesse,dont use TWRP , i prefere CWM or PhilzTouch,why : alot of user are have postet probs when they used TWRP.
Also i prefere after rooting The Blackhawk Kernel.
Click to expand...
Click to collapse
So i have flashed (again) the stock firmware from sammobile,i rooted it,installed cwm 6.0.4.7 and then i flashed SEAL rom v4 and its not working. Its like something that doesnt let custom rom boot on my tab. Sad part is that i cant provide a logcat because the android wont boot.
EDIT: Do i have to unlock the bootloader?
d0vada said:
So i have flashed (again) the stock firmware from sammobile,i rooted it,installed cwm 6.0.4.7 and then i flashed SEAL rom v4 and its not working. Its like something that doesnt let custom rom boot on my tab. Sad part is that i cant provide a logcat because the android wont boot.
EDIT: Do i have to unlock the bootloader?
Click to expand...
Click to collapse
Last Try,
Have you flashed The Blackhawk Kernel?
If not , Boot Into recovery, make a full wipe, flash seal ,Blackhawk Kernel ,full wipe again and reboot.
If this all not help ,post your prob at The Rom Thread.
bierma32 said:
Last Try,
Have you flashed The Blackhawk Kernel?
If not , Boot Into recovery, make a full wipe, flash seal ,Blackhawk Kernel ,full wipe again and reboot.
If this all not help ,post your prob at The Rom Thread.
Click to expand...
Click to collapse
I allready tried 3 roms(seal, 4.2.2 beta 2 and inspire) and all goes to the same result. Also, after installing the cwm i flash first the blackhawk kernel and android boots normally (stock rom with custom kernel) but custom rom with or without custom kernel wont boot.
I had similar problem try flashing seal v3.

[Q] Anyone else have trouble flashing a ROM

I am on 4.1.2
Ive used all 3 available custom recoveries, 4 if you include the other TWRP
Every recovery with every zip, all md5 checked, say unable to open zip
Am I doing something wrong?
shaunjohn said:
I am on 4.1.2
Ive used all 3 available custom recoveries, 4 if you include the other TWRP
Every recovery with every zip, all md5 checked, say unable to open zip
Am I doing something wrong?
Click to expand...
Click to collapse
What are you trying to flash?
And which recovery VERSION are you using?
Model aand name of rom
Which model do you have?? and what is the rom's name?
210r
ive tried
philz recpvery
cwm
twrp 2/7 and 2/8
ive tried
cm11
rocket
swat(name may be wrong)
kids
Reflash the 4.4.2 firmare from odin all over again and install TWRP (2.8.0.0) the flash rom in recovery
A friendly reminder - please keep all question threads in the Q&A board. Android dev is only for posting releases, not questions.
Thanks!
Same Result
ruzell said:
Reflash the 4.4.2 firmare from odin all over again and install TWRP (2.8.0.0) the flash rom in recovery
Click to expand...
Click to collapse
same result, error opening zip file
Did you ever figure this out? I"m having the same issue.
Can't flash a ROM on Tab 3 7.0 t210r
I am rooted, first thing I did after purchase.
Am currently running 4.1.2, build jzo54k.t210rueamk1
I have flashed PhilZ Touch 6, 6.44.9, ClockworkMod 6.0.4.9 from here:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/
I have tried to flash the following ROMs:
Stockrom Series Ultimate Edition
http://forum.xda-developers.com/showthread.php?t=2489395
RocketTab v3.1
http://forum.xda-developers.com/showthread.php?t=2507772
Flash fails with:
Installation aborted (bad), can't open <path to zip file><name of zip>
This happens after a factory reset, wipe data, cache.
I have a Samsung S3 that I have rooted, and then flashed many times. Before that I had an HTC EVO. I am not new to the process, but apparently I am missing something here.
Got any suggestions?
Which Odin Version you are used to install The Recovery? Try an other Version.
Is your Rom on The micro Sdcard ? If you use Philz so is The max capacity 32 GB, if you use TWRP so is max 64 GB supported.
starmaha said:
I am rooted, first thing I did after purchase.
Am currently running 4.1.2, build jzo54k.t210rueamk1
I have flashed PhilZ Touch 6, 6.44.9, ClockworkMod 6.0.4.9 from here:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/lt02wifi/
I have tried to flash the following ROMs:
Stockrom Series Ultimate Edition
http://forum.xda-developers.com/showthread.php?t=2489395
RocketTab v3.1
http://forum.xda-developers.com/showthread.php?t=2507772
Flash fails with:
Installation aborted (bad), can't open <path to zip file><name of zip>
This happens after a factory reset, wipe data, cache.
I have a Samsung S3 that I have rooted, and then flashed many times. Before that I had an HTC EVO. I am not new to the process, but apparently I am missing something here.
Got any suggestions?
Click to expand...
Click to collapse
bierma32 said:
Which Odin Version you are used to install The Recovery? Try an other Version.
Is your Rom on The micro Sdcard ? If you use Philz so is The max capacity 32 GB, if you use TWRP so is max 64 GB supported.
Click to expand...
Click to collapse
I didn't use Odin to flash the recovery. Downloaded the zip and flashed via recovery.
I have tried with the ROM on the external and internal SD. Same results.
32GB SD.
starmaha said:
I didn't use Odin to flash the recovery. Downloaded the zip and flashed via recovery.
I have tried with the ROM on the external and internal SD. Same results.
32GB SD.
Click to expand...
Click to collapse
u
How do you rooted your Tab?
With Stockrecovery you can not flash a Rom or Recovery.
Flash Philz or TWRP With Odin, reboot to The New flashen Recovery , than you can install a Rom.
All information for The right steps you will find at dev Sektion.
bierma32 said:
u
How do you rooted your Tab?
With Stockrecovery you can not flash a Rom or Recovery.
Flash Philz or TWRP With Odin, reboot to The New flashen Recovery , than you can install a Rom.
All information for The right steps you will find at dev Sektion.
Click to expand...
Click to collapse
To clarify, when I initially rooted, I used Odin to flash recovery and root.
starmaha said:
To clarify, when I initially rooted, I used Odin to flash recovery and root.
Click to expand...
Click to collapse
At first we are turn us i The circle,but now we can come to your prob.
Flash a Rom and make a picture and post that here. So we can See The error message and your Recovery.
starmaha said:
To clarify, when I initially rooted, I used Odin to flash recovery and root.
Click to expand...
Click to collapse
Sounds like the rom download is bad. Check the md5 of the rom before trying to install.
Kind of success. I downloaded the same version of PhilZ, for Odin, on my laptop.
I put the tablet in download mode and flashed the recovery with Odin.
I downloaded the ROM again (http://forum.xda-developers.com/gal...m-stockrom-kitkat-version-16-08-2014-t2849742). This is one I had tried before. This time to my laptop and copied it to the tablet. The other times, I had downloaded the ROM directly onto the tablet.
While it was in the process of flashing, there were some video anomolies.
I rebooted the tablet into recovery and flashed the ROM. It hung on SAMSUNG for a very long time after the flash and reboot. I powered it off and rebooted. It booted completely this time, but not without some issues. The first thing was when the message pops up that Android is optimizing apps. That bar was all screwy looking, snowy. (see attached image)
Once I got to the lock screen and entered the pin, the screen "fractured", pieces shifted around, and the tablet locked up. I wish I had taken a picture of it. Never seen anything like it.
I had not done a data wipe yet. I did a data wipe, rebooted, entered the pin, tablet locked up again.
I then was going to restore the backup I made before the flashing. It wouldn't restore because of an MD5 mismatch. I had restored this backup previously with no problem.
I restored an older backup and then spent a couple of hours getting everything back to the level of the now broken backup.
Flash nolekat and all went fine.
I've had problems as well. I normally flash via a recovery. At times I'll have an md5 mismatch or it just doesn't work; I've even backed up a working ROM only to find out I can't restore the same backup. Seems like a hit or miss with me
I tried flashing NoleKat and it failed on me too.
[/COLOR]
bierma32 said:
At one of your post you write after flashing you must put in the Pin?
So you have make not a clean install or factory reset, you done a wipe cache and wipe dalvik.
You must do a clean install if you come from different Roms or Version.
Click to expand...
Click to collapse
Please post a picture from your Recovery with the error message.

Flash help

I am going to flash a new AOSP on my tab using twrp but i do not have a sd card so if i do a full wipe i will have nothing left to flash because i will loose the files .
I am currebtly using phoenix rom and i am going to flash android m rom so should k flash the rom without a full wipe
MY DEVICE: GALAXY TAB S 10.5 (SM-T805)
Why do you need an sd card?
Just backup to internal storage, no need to full wipe either. Just wipe data that is enough or try and dirty flash first.
Can i choose files from backup
Ashyx ols could u give me step by step instructions i am still a noob
Gea0501686 said:
Ashyx ols could u give me step by step instructions i am still a noob
Click to expand...
Click to collapse
All you need do is install twrp and then boot to recovery. Make a full backup(backup will automatically be stored on your device storage).
Install the zip using twrp.
That's it.
If you have issues when booting just go back into recovery and wipe data only then reboot.
I did what u said but it seems there is a problem i downloaded the right files but twrp says that it is for chagglewifi that is smt800 not for chaggalte . I re downloaded it but the error presisits
Idk what to do now a little light
It says it is for smt800 not t805 help the files are right i downloaded it 3 times
ashyx said:
All you need do is install twrp and then boot to recovery. Make a full backup(backup will automatically be stored on your device storage).
Install the zip using twrp.
That's it.
If you have issues when booting just go back into recovery and wipe data only then reboot.
Click to expand...
Click to collapse
Ashyx help plzzz
Gea0501686 said:
Ashyx help plzzz
Click to expand...
Click to collapse
Where did you download twrp from?
Do you have a t800 or t805?
I got it just updated my twrp
ashyx said:
Where did you download twrp from?
Do you have a t800 or t805?
Click to expand...
Click to collapse
Could u suggest me the best ROM for smt805
Gea0501686 said:
Could u suggest me the best ROM for smt805
Click to expand...
Click to collapse
This is the best for me: http://forum.xda-developers.com/showthread.php?t=3222264

Can not flash new roms, it stucks on boot screen

Hello dear friends,
I had been using some custom roms for a while like lineage os, cm, resurrection etc.Then i wanted to change it to a 4.4 rom.Once i flashed a stock rom by odin.Then i tired to use Eclipse.I have been using it without a problem.But now i want to upgrade the phone again.
-And i tried to flash different roms but i have the same problem.It passes SAMSUNG screen and shows ROM's flash.But it stucks in there.It keeps moving but nothing more.The rom doesn't start the homescreen.I tried to factory reset, wipe cache and dalvik cache.But they also doesn't work at all.I wait about half and hour or 1 hour, Once i tried to let it work overnight even.But doesn't work.Now i try to flash Cosmic OS but the problem still exists.I have a Eclipse rom backup and i restore it and it works.I use TWRP recovery on the phone.
-So what the problem might be?How can i fix it?
I recommend flashing back to the latest stock ROM, factory reset, and start over with TWRP.
audit13 said:
I recommend flashing back to the latest stock ROM, factory reset, and start over with TWRP.
Click to expand...
Click to collapse
Thank you it worked.I just want to explain the steps to give some information for the others who got the same problem.
-Connect the phone to the pc and flash a stock rom by odin or heimdall in linux
-Then wait for the rom to start.
-Open stock recovery mod (not TWRP or CWM Recovery)
-Format all data
-Flash a custom recovery (I use TWRP)
-And flash the custom rom as instructions.
And it works for me.Thank you again.
stranger_88 said:
Thank you it worked.I just want to explain the steps to give some information for the others who got the same problem.
-Connect the phone to the pc and flash a stock rom by odin or heimdall in linux
-Then wait for the rom to start.
-Open stock recovery mod (not TWRP or CWM Recovery)
-Format all data
-Flash a custom recovery (I use TWRP)
-And flash the custom rom as instructions.
And it works for me.Thank you again.
Click to expand...
Click to collapse
Glad you got it working.
Thanks for posting your method.
same problem
i'm gettin the same problem...
in download mode there are few lines as follows:
odin mode
prduct name:gt-n7100
current binary:Custom
System Status:Custom
knox warranty void: 1
AP SWREV: A2
PLSSS HELP
ShubhamS156 said:
i'm gettin the same problem...
in download mode there are few lines as follows:
odin mode
prduct name:gt-n7100
current binary:Custom
System Status:Custom
knox warranty void: 1
AP SWREV: A2
PLSSS HELP
Click to expand...
Click to collapse
Which rom you are using to flash?
Is the rom exactly for your phone model? (For eg, N7100 rom cannot be used for N7105)
thomas140 said:
Which rom you are using to flash?
Is the rom exactly for your phone model? (For eg, N7100 rom cannot be used for N7105)
Click to expand...
Click to collapse
Yep ...it's for N7100 only.... DotOs 7.1.2 by Santosh
---------- Post added at 08:20 AM ---------- Previous post was at 08:16 AM ----------
stranger_88 said:
Hello dear friends,
I had been using some custom roms for a while like lineage os, cm, resurrection etc.Then i wanted to change it to a 4.4 rom.Once i flashed a stock rom by odin.Then i tired to use Eclipse.I have been using it without a problem.But now i want to upgrade the phone again.
-And i tried to flash different roms but i have the same problem.It passes SAMSUNG screen and shows ROM's flash.But it stucks in there.It keeps moving but nothing more.The rom doesn't start the homescreen.I tried to factory reset, wipe cache and dalvik cache.But they also doesn't work at all.I wait about half and hour or 1 hour, Once i tried to let it work overnight even.But doesn't work.Now i try to flash Cosmic OS but the problem still exists.I have a Eclipse rom backup and i restore it and it works.I use TWRP recovery on the phone.
-So what the problem might be?How can i fix it?
Click to expand...
Click to collapse
Stranger_88....try doing a complete advanced wipe using Twrp..and then install a rom
You said DotOS 7.1.2, it is custom rom and I think it needs to be install using TWRP. And also, need to perform wipe in TWRP before reboot. Otherwise, it will stuck at Samsung logo boot loop.
Solved
thomas140 said:
Which rom you are using to flash?
Is the rom exactly for your phone model? (For eg, N7100 rom cannot be used for N7105)
Click to expand...
Click to collapse
Dude I got it working. Use Heimdall in Linux , my phone was detected in Heimdall and I followed the simple instructions there and flashed a new rom.

Categories

Resources