hi i tried to flash galaxy grand i9802 but in said failed
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> vc-firmware.img
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
plz help me i cant use my phone :crying::crying::crying:
jackeagle said:
hi i tried to flash galaxy grand i9802 but in said failed
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> vc-firmware.img
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
plz help me i cant use my phone :crying::crying::crying:
Click to expand...
Click to collapse
boot into recovery and wipe data/reset and reflash the rom via odin
jackeagle said:
hi i tried to flash galaxy grand i9802 but in said failed
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> vc-firmware.img
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
plz help me i cant use my phone :crying::crying::crying:
Click to expand...
Click to collapse
Try flashing with the stock again... Keep the phone untouched. I guess the phone got disconnected during the process. And flash process failed. Nothing to worry flash with odin again
Sent from my GT-I9082 using XDA Premium 4 mobile app
DMJoh said:
Try flashing with the stock again... Keep the phone untouched. I guess the phone got disconnected during the process. And flash process failed. Nothing to worry flash with odin again
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
THANKS for the reply...I tried to flash again but same error and i cant boot to recovery it says " FIRMWARE UPGRADE ENCOUNTERED AN ISSUE.PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN" plz help:crying:
DMJoh said:
Try flashing with the stock again... Keep the phone untouched. I guess the phone got disconnected during the process. And flash process failed. Nothing to worry flash with odin again
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
THANKS for the reply...I tried to flash again but same error and i cant boot to recovery it says " FIRMWARE UPGRADE ENCOUNTERED AN ISSUE.PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN" plz help PLZ i m not able to charge battery back so what might the backup time i get in download mode coz via kies it might take 7 hours...before failure it was 80% charged:crying::crying:
Try a different usb cable
Sent from my GT-I9082 using Tapatalk
jackeagle said:
THANKS for the reply...I tried to flash again but same error and i cant boot to recovery it says " FIRMWARE UPGRADE ENCOUNTERED AN ISSUE.PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN" plz help PLZ i m not able to charge battery back so what might the backup time i get in download mode coz via kies it might take 7 hours...before failure it was 80% charged:crying::crying:
Click to expand...
Click to collapse
Still you can go to download mode by pressing the keys... So using odin you can flash your device using pda. But the thing is you should see that the process is getting till pass. Also even if it shows that error message just plug in your phone and it will charge. Connecting to kies and updating is hell of a task and you will fail for 85℅.
So the point is you can go to download mode even now.
Connect it to pc and flash the firmware as before.
Your problem might have caused because of a faulty usb cable, usb port of pc or the micro usb port of your phone.
These are chances so try @nother port your computer, if needed. Change the cable.
Also take care that the phone is kept alone while downloading the ROM.
:thumbup: :thumbup:
Sent from my GT-I9082 using XDA Premium 4 mobile app
DMJoh said:
Still you can go to download mode by pressing the keys... So using odin you can flash your device using pda. But the thing is you should see that the process is getting till pass. Also even if it shows that error message just plug in your phone and it will charge. Connecting to kies and updating is hell of a task and you will fail for 85℅.
So the point is you can go to download mode even now.
Connect it to pc and flash the firmware as before.
Your problem might have caused because of a faulty usb cable, usb port of pc or the micro usb port of your phone.
These are chances so try @nother port your computer, if needed. Change the cable.
Also take care that the phone is kept alone while downloading the ROM.
:thumbup: :thumbup:
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yahooooooooooooooo My Galaxy Grand is back in action:victory::victory: Thanks A lot to everyone for replying me very soon As DMJoh said i did it..I changed my usb cable with my old Nokia usb cable (very short) and tried to flash the firmware via odin and it was successful so problem was my USB cable.. but my bin is 48 and all status are custom:laugh:....
jackeagle said:
Yahooooooooooooooo My Galaxy Grand is back in action:victory::victory: Thanks A lot to everyone for replying me very soon As DMJoh said i did it..I changed my usb cable with my old Nokia usb cable (very short) and tried to flash the firmware via odin and it was successful so problem was my USB cable.. but my bin is 48 and all status are custom:laugh:....
Click to expand...
Click to collapse
Kudos! Use Triangle Away to reset Bin counter :victory: :laugh:
Related
hi i tried to flash galaxy grand i9802 but in said failed
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> vc-firmware.img
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
plz help me i cant use my phone
Are you using odin 3.04 ?
Sent from my GT-I9082 using xda premium
akiratoriyama said:
Are you using odin 3.04 ?
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
yes i using odid 3.04 and try 3.07 but no resault
hassanshaikhi said:
yes i using odid 3.04 and try 3.07 but no resault
Click to expand...
Click to collapse
Check any kies software is running background
Sent from Gt-I9082
rejocie001 said:
Check any kies software is running background
Sent from Gt-I9082
Click to expand...
Click to collapse
yes kies is running in background
kies.exe
kies.pdlr.exe
kiestryagent.exe
Does the software Kiess make the Odin not be able to flash my mobile phone?
(My mobile phone isn't available right now to try)
hassanshaikhi said:
yes kies is running in background
kies.exe
kies.pdlr.exe
kiestryagent.exe
Does the software Kiess make the Odin not be able to flash my mobile phone?
(My mobile phone isn't available right now to try)
Click to expand...
Click to collapse
Kies are used for drivers only its shold not be running ... this same thing hapen with me (i dnt knw perfect resn)... den i stop kies and tried succesful in flashing ... use odin3.04 only ... and while flashing odin may say notresponding just wait for while it will work ... flash amcd6 ron for gud batry and perfrmnce ...
Sent from my GT-I9082 using xda premium
Why do you say to use odin 3.o4 only 3.07 is better and faster.
Suriya357 said:
Why do you say to use odin 3.o4 only 3.07 is better and faster.
Click to expand...
Click to collapse
Hey im not dev ... but every dev recomend odin3.04 for grand ... i dnt know why ? U can see tutorials in grand section u will only find odin3.04 ...
Sent from my GT-I9082 using xda premium
yeah using odin 3.04 will help and stop kies before flashing always..!!
---------- Post added at 12:19 PM ---------- Previous post was at 12:13 PM ----------
remember place md5 in pda...
adheeshkurekar said:
Hey im not dev ... but every dev recomend odin3.04 for grand ... i dnt know why ? U can see tutorials in grand section u will only find odin3.04 ...
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
this is becoz i used odin3.07 and it does not work properly for me so i personally use odin 3.04
i close kies from taskmanager but noting change
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
help me (
thanks for all its flashed successfully
tanQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQ
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> vc-firmware.img
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008> dt-blob
<ID:0/008> cache.img
<ID:0/008> system.img
<ID:0/008> hidden.img
<ID:0/008> param.lfs
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Added!!
hassanshaikhi said:
thanks for all its flashed successfully
tanQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQ
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> vc-firmware.img
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> BcmCP.img
<ID:0/008> dt-blob
<ID:0/008> cache.img
<ID:0/008> system.img
<ID:0/008> hidden.img
<ID:0/008> param.lfs
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Added!!
Click to expand...
Click to collapse
gr8 then
That's a great news :good:
May be you could share how you succeeded and also edit title and add [SOLVED].
Good luck !!!
Please help.....problem of booting galaxy grand GT-I9082
i wanted to root my phone, unfortunately in odin 3.07, i checked NAND ERASE ALL option. now i cannot start my phone. i recovered rom using samsung kies. bt it doesn't start......plz plz plz help.........
i kinda have the same problem . i know this is an old thread but i cant find solution nowhere.
i am getting the exact fail at the same spot as OP . i would really like to know what you did to succesfully install the software .
also when in download mode i get this?
ODIN MODE
PRODUCT NAME: GT-I9080L
CUSTOM BIN DOWN: Yes ( 10 counts)
CURRENT BIN: Custom
SYSTEM STATUS: Custom
that install bar only gets to 3 millimeter or so than fails.
can anyone pls hel me out
Hi make sure samsung kies not running and connect usb cable in back of youre case not front
just want to comment because i've fixed it:victory::victory::victory::victory::victory:
Hi,
I have GT-N7100 with official ROM. Few months ago I received an invitation to upgrade my ROM from 4.1 to 4.3
I have accepted the invitation and the upgrade was smooth and all was OK.
3 weeks ago I received another notification to update the ROM. It was also 4.3 and in the description it was mentioned as better stability.
I have accepted the invitation.
This time I started to get problems. The phone after reset got stuck on the first screen with the model name of "SAMSUNG GT-N7100".
I have HOME+POWER+VoluneUP and selected to clear all data to factory reset. - I still got the same stuck failure.
I tried to download various of official ROMs from sammobile (Hong Kong, UK, Israel, UAE) and install them with Odin3 but I got the same FAIL error in all of them.
Here is the log:
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100ZSUENA1_N7100OZSENA1_N7100ZSENA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
On my phone I see the following text:
ODIN MODE
PRODUCT NAME: GT-N7100
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX WARRANTY VIOD: 0
AP SWREV: A2
I tried to use KIES --> Tools --> Emergency firmware recovery -->
But the "List of devices requiring emergency recovery" is empty
When I restart my phone I get the following message:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I don't know what else to do?
Can you advise?
Thanks,
Dror
Maybe your USB Debugging isn't enabled. Try flashing a custom rom if you have twrp or philz recovery installed.
joy854 said:
Maybe your USB Debugging isn't enabled. Try flashing a custom rom if you have twrp or philz recovery installed.
Click to expand...
Click to collapse
I am noob.
Can you explain me step by step what should I do?
I don't think that my "USB Debugging is enabled" cause I don't know how to enable it.
I don't have any access to HOME+POWER+VolumUP anymore.
dror.dahan said:
I am noob.
Can you explain me step by step what should I do?
I don't think that my "USB Debugging is enabled" cause I don't know how to enable it.
I don't have any access to HOME+POWER+VolumUP anymore.
Click to expand...
Click to collapse
Download philz recovery here http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.07.9-n7100.tar.md5
Download odin v3.09. you can get it on google. Put your phone in download mode. Connect to your pc using a USB Cable.
Open Odin Select PDA as the md5 file which is the recovery. After installing recovery download a custom rom like DN3.
Put the zip file of ROM into your external sd card using a card reader. Open philz recovery by pressing Vol up, Home and Power buttons together.
Wipe data and factory reset. Flash the rom. Your phone should be fully functional by now.
HIT THANKS IF I HELPED YOU
joy854 said:
Download philz recovery here http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.07.9-n7100.tar.md5
Download odin v3.09. you can get it on google. Put your phone in download mode. Connect to your pc using a USB Cable.
Open Odin Select PDA as the md5 file which is the recovery. After installing recovery download a custom rom like DN3.
Put the zip file of ROM into your external sd card using a card reader. Open philz recovery by pressing Vol up, Home and Power buttons together.
Wipe data and factory reset. Flash the rom. Your phone should be fully functional by now.
HIT THANKS IF I HELPED YOU
Click to expand...
Click to collapse
I have run Odin v3.09 with philz_touch_6.07.9-n7100.tar.md5:
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)"
Then I have pressed: Vol up, Home and Power buttons together and got the following message (see image attached):
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
So I couldn't continue according to the rests of steps as you described.
dror.dahan said:
I have run Odin v3.09 with philz_touch_6.07.9-n7100.tar.md5:
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)"
Then I have pressed: Vol up, Home and Power buttons together and got the following message (see image attached):
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
So I couldn't continue according to the rests of steps as you described.
Click to expand...
Click to collapse
I have once undergone through the same issue. If odin got succeded it can't say "Firmware upgrade encountered an issue". You must be able to access the recovery if odin got succeded.
joy854 said:
I have once undergone through the same issue. If odin got succeded it can't say "Firmware upgrade encountered an issue". You must be able to access the recovery if odin got succeded.
Click to expand...
Click to collapse
Well it didn't worked for me.
I tried to do it again but now I get a failure:
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
Can you help?
My SM-T110 is stuck in bootloop. I can use download mode and not recovery.
I have tried so far:
1) Start in recovery mode by pressing vol up, home and power buttons at once.. i get a dead android logo and "NO COMMAND"
2) Flash new firmware by downloading stock software and using ODIN for flashing. It fails.
3) Install TWRP and CWM - again both fail with ODIN.
I tried 3 different cables with odin but get same result.
I googled for days and had no luck so i hope you can help me.
ccsrichman said:
My SM-T110 is stuck in bootloop. I can use download mode and not recovery.
I have tried so far:
1) Start in recovery mode by pressing vol up, home and power buttons at once.. i get a dead android logo and "NO COMMAND"
2) Flash new firmware by downloading stock software and using ODIN for flashing. It fails.
3) Install TWRP and CWM - again both fail with ODIN.
I tried 3 different cables with odin but get same result.
I googled for days and had no luck so i hope you can help me.
Click to expand...
Click to collapse
what version of Odin are you using?
Give THIS version a try.
If it fails, post a screenshot of Odin.
I tried 3.09, 1.something and now yours 3.07.. still no luck. I cant upload a screenshot because im a new user. but thats what it says with 3.07
I have auto reboot and f reset time on. nothing else and i chose PDA which is for my region and for sm-t100
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T110XXUANI9_T110SEBANH2_T110XXUANI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> timh.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> obm.bin
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
ccsrichman said:
I tried 3.09, 1.something and now yours 3.07.. still no luck. I cant upload a screenshot because im a new user. but thats what it says with 3.07
I have auto reboot and f reset time on. nothing else and i chose PDA which is for my region and for sm-t100
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T110XXUANI9_T110SEBANH2_T110XXUANI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> timh.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> obm.bin
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I've seen other people have success by trying different cables or sometimes even other computers. Other than that, I have no other ideas.
Anybody else has any ideas ?
gr8nole said:
I've seen other people have success by trying different cables or sometimes even other computers. Other than that, I have no other ideas.
Click to expand...
Click to collapse
BTW Odin is written in white in download mode not red as others have.. and when i try to use odin the upper left corner goes paritially black.. like theres a black box covering half of the text there
ccsrichman said:
BTW Odin is written in white in download mode not red as others have.. and when i try to use odin the upper left corner goes paritially black.. like theres a black box covering half of the text there
Click to expand...
Click to collapse
And the text there is:
ODIN MODE
PRODUCT NAME: SM-T110
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
nothing else
Also a newbie with the Tab TM-110
Hi there
Since we are not many here with our device i thought i should send you a message.
Unfortunately i do not have a solution for your problem but maybe it helps if you take a look at what i experienced so far.
I hope you can find my Thread by my profile.
Have you tried to use a different PC yet for flashing with Odin? Would be interesting to know if it helped.
So. Don`t give up. There will be a solution. :good:
Naturestone
I'm having the same issue, anyone can help?
same error GT-I8200 2ND partition error
I tried to flash Samsung Galaxy note 2 Gt-N7100 firmware N7100XXUFNL1_N7100ODDFNI1_N7100DDUFND1_HOME.tar.md5 using odin version 1.85 ,3.07 , 3.09 , 3.12 .3 but i am getting Fail as odin status i found that i need to flash pit file so , i flashed pit PIT_N7100_16GB_20121102.pit along with it but still getting status as Fail .Then i tried flashing twrp too but still status is fail
odin log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I have TWRP recovery installed but i am unable to mount .
Internal storage , External sd card ,OTG are showing 0mb.When i boot into twrp a to3g window opens in to my laptop.
Please help me fix this.
Try flashing without pit file. Try different USB cables and USB ports.
audit13 said:
Try flashing without pit file. Try different USB cables and USB ports.
Click to expand...
Click to collapse
i have tried flashing without pit file , tried another usb cable and another ports too but still it's not working.Please help me
Bruh can your please share this topic with others too?
where you found that PIT file so i can try this too
janezz2 said:
where you found that PIT file so i can try this too
Click to expand...
Click to collapse
I googled "pit file for note 2 n7100" .
When you try to flash the phone with Odin and no pit file, what errors appear in the Odin log? Did you confirm the model # in download mode?
Post the Odin log when a flash fails. These logs can provide clues as to what's causing the problem.
audit13 said:
When you try to flash the phone with Odin and no pit file, what errors appear in the Odin log? Did you confirm the model # in download mode?
Post the Odin log when a flash fails. These logs can provide clues as to what's causing the problem.
Click to expand...
Click to collapse
odin log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try flashing without repartitioning.
Tried different USB cables and USB ports.
audit13 said:
Try flashing without repartitioning.
Tried different USB cables and USB ports.
Click to expand...
Click to collapse
how
Flash the stock rom from Sammobile.com using Odin without a pit file.
audit13 said:
Flash the stock rom from Sammobile.com using Odin without a pit file.
Click to expand...
Click to collapse
same error did not work
using a note 2 today and it just decided to reboot on its own, and then never got passed the splash screen. i have twrp recovery installed. booted into recovery and couldnt do anything. couldn't mount anything, wipe anything, restore anything. all storage showed 0MB. kept giving errors that it couldn't mount any partitions (cache, system, etc.) something with error 16.
i tried flashing a stock rom with odin. that failed. just seems like it is totally corrupted and nothing can be written to it.
how does something like that happen just randomly???? any way back from the dead?
Is the phone an AT&T Note 2? Where did you find the stock ROM for Odin?
audit13 said:
Is the phone an AT&T Note 2? Where did you find the stock ROM for Odin?
Click to expand...
Click to collapse
yes AT&T note 2.
the stock rom i got from a link on this forum. i tried this one first, I317-UCUCNJ2-Stock.tar.md5, then this one I317-UCUCNE5-Stock.tar.md5
also tried re-partitioning after with this pit file, i317.pit
i tried using Odin v1.85 and Odin 3.07
What is the error message in the Odin log?
Tried using different usb cables and usb ports with Odin?
audit13 said:
What is the error message in the Odin log?
Tried using different usb cables and usb ports with Odin?
Click to expand...
Click to collapse
just tried it, same result. odin log? you mean the message output? here it is for when i tried with and without PIT file
Code:
[B]No pit file[/B]
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I317-UCUCNE5-Stock.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
[B]With pit file[/B]
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I317-UCUCNE5-Stock.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
Without the pit file, it's failing with the boot.img file and this may be fixed by using an oem Samsung cable or different usb 2.0 port. It could also be that the bootloader in the rom is not for the phone or the phone's current bootloader is newer than the bootloader being fished.
audit13 said:
Without the pit file, it's failing with the boot.img file and this may be fixed by using an oem Samsung cable or different usb 2.0 port. It could also be that the bootloader in the rom is not for the phone or the phone's current bootloader is newer than the bootloader being fished.
Click to expand...
Click to collapse
tried different cables and ports and another ROM, I317UCAMA4.. still fails.
i think it's a lost cause.
I'm sure you are correct but this phone shows up as an sgh-i317 in download mode?
Where did you get the ROMs? AT&T never released an Odin-flashable ROM after 4.1.2.
audit13 said:
I'm sure you are correct but this phone shows up as an sgh-i317 in download mode?
Where did you get the ROMs? AT&T never released an Odin-flashable ROM after 4.1.2.
Click to expand...
Click to collapse
yes it shows as sgh-i317 when in download mode
roms were gotten from wherever one gets roms i guess