Related
Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Try this method
If it helps you then thank me
First off everything remove the SIM card and let the phone rest for five minutes and put the SIM and
Press the power button and volume up button at the same time for little long time your phone wil start as normal
Some times **** happens bro
Sent from my LT26i using xda app-developers app
Dont work for me
lukasz8504 said:
Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Click to expand...
Click to collapse
Connect in flashtool, relock bootloader. Use seus to install fresh fw.
lukasz8504 said:
Dont work for me
Click to expand...
Click to collapse
Ok i find this tread http://forum.xda-developers.com/showthread.php?t=1527159 but when i try to enter flashmode i see this message device conected with usb debugging off for 2011 devices line be sure you are not in mtp mode
Try to use a different charger. I got the same bug with a sola . It worked with a samsung wallcharger. The sola was not loading with the sony charger when i turned it of. Other's reported this bug when phone turns off because of empty battery.
I try charger from se x10, xperia s, iphone 3gs and zte blade and nothing change still red led and after few minute red turn off and then pc see phone but in flashtool only this message device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode
lukasz8504 said:
I try charger from se x10, xperia s, iphone 3gs and zte blade and nothing change still red led and after few minute red turn off and then pc see phone but in flashtool only this message device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode
Click to expand...
Click to collapse
I think your phone hard bricked !
In this situation if you couldn't reset your phone by holding power+volume up till it 3 times vibrate , try power+volume down when you connected to pc sometimes it reset your phone.
try power+volume up when you plugged in wall charger till 3 times vibrate ( in some situations it happens after 30 second you hold both.
If none on this reset your phone , its only way that you send it to repare service of sony to re write your bootloader by JTAG box. I had the same problem when I install an improper kernel and I search all of net and try all thing I found but after 2 week I can't solve the problem and only way to back your phone to work is, re writing your bootloader by JTAG box
Anybody can help? maybe trim area problem??
that happened to me once. I removed the battery, connected the wall charger, and then put the battery back. It was the last thing I tried and it worked.
(Yes, I had to open the phone, so I don't have warranty)
waiflih said:
that happened to me once. I removed the battery, connected the wall charger, and then put the battery back. It was the last thing I tried and it worked.
(Yes, I had to open the phone, so I don't have warranty)
Click to expand...
Click to collapse
I try this and red led blink now
Can you now plug in to pc holding volume down to get flash mode though?
Sent from my LT26i using Tapatalk 2
When i connect to pc with volume down in flashtool see for devices 2011... mtp mode, device manager show semc flash device and somthing new sony ericsson seehcri control device
Does the led stop going red then?
Sent from my LT26i using Tapatalk 2
Yes when connect to pc red led turn off, flashtool see phono but not in flashmode
Did you repaired it bro
No my phone is in second service and i must wait. I find possible solution but cant try it. http://forum.xda-developers.com/showthread.php?t=1910029
Are you sure you're connecting.phone to PC in flashmode? (holding down the volume button while plugging in the phone)
Good luck there then
lukasz8504 said:
Hello sorry my english is bad. I got problem with my phone. Phone dont turn on, when i connect to wall charger or pc only red led turn on. Pc see phone as semc usb device. When a try to flash with flashtool only this show device coonected with usb debugging off for 2011 devices line be sure you are not in mtp mode how i can turn on debugging usb when i cant run the phone. Seus dont see phone. Please help.:crying:
Click to expand...
Click to collapse
I had this pr0blem but s0lved it ..!!"
Jxt remove y0ur sim card wait f0r 10 sec0ndz Then v0lume up + P0wer f0r 5 sec0ndz and the ph0ne will vibrate 3 times after that release butt0nz n p0wer 0n the device d0nt plug in the charger then it will turn 0n and say shutting d0wn and after when it shut down plug it ........ Pr0b s0lved
hi !
First, sorry for my english !
I updated One phone (Arc s) to 4.1.B.0.587 with flashtool ! but now phone is not charge or USB detected ( ON or OFF ) !
If i charge battry with another phone , my phone is ON and work but still no USB Detected !
when connect powered off phone with back button pressed just green led & Nothing not happen(no device appear) in windows device manager !!
when connect powered off phone with volume down button just boot loop SONY logo & Nothing not happen(no device appear) in windows device manager !!
I need help !
thx guy !
This is weird, yes.
Try pulling the battery to make sure the phone has turned off properly.
Then you can try flash a different firmware if your phone doesn't boot properly.
Here's a thread with all sorts of info that can help you figure things out - http://forum.xda-developers.com/showthread.php?t=1653188
good luck.
I know there are several threads out there with bricked XSs. I have read a lot of them and tried a lot of the stuff that is in there but none of them are exactly my case or they didnt work.
I rooted my xperia S which as on Android 2.3.7 and flashed it with a AOSP ICS Rom (using flashtool). I have locked BL and my stupid mistake was to try to flash a ROM that was for unlocked BL.
Now my phone wont go past the SONY logo, I have tried to fix it with the flashtool but I cannot make it to go on flashmode son my computer doesnt recognize my phone. When I plug it in the computer the LED turns red.
Any Ideas or suggestion? Please help me save this phone, It is brand new, I havent even made a single call with it.
Cheers!
Hold volume up and power button until it vibrates 3 times. Now it is off.
Install flashtool
Go to the drivers folder and install all the necessary drivers. Fastboot, flashmode Xperia S etc drivers
Download the ftf file.
Put it in the firmware folder
Now open flashtool and select the ftf file.
When its ready hold volume down button and plug your phone in. Wait.
It should work
There's no way you can brick a locked bootloader XS so don't worry
Sent from my 4.2.2 Xperia S via Tapatalk
Ben36 said:
Hold volume up and power button until it vibrates 3 times. Now it is off.
Install flashtool
Go to the drivers folder and install all the necessary drivers. Fastboot, flashmode Xperia S etc drivers
Download the ftf file.
Put it in the firmware folder
Now open flashtool and select the ftf file.
When its ready hold volume down button and plug your phone in. Wait.
It should work
There's no way you can brick a locked bootloader XS so don't worry
Sent from my 4.2.2 Xperia S via Tapatalk
Click to expand...
Click to collapse
Thanks a lot man, I am going to try again, but I already had those files installed in my computer because like I said, I rooted and flashed my phone using Flashtool before.
I will try to go through the whole process again. But at least you are telling me that bricking a XS with locked BL is almost impossible.... that's given me hope.
cheers
If your BL is looked download EMMA tool from Sony, all the instructions are there and it will get you back to stock.
Don't worry, same thing happened to me and this generous tool fixed it
Sent from my Xperia S
Memethecat said:
If your BL is looked download EMMA tool from Sony, all the instructions are there and it will get you back to stock.
Don't worry, same thing happened to me and this generous tool fixed it
Sent from my Xperia S
Click to expand...
Click to collapse
Thanks,
Does this installs Stock from the original country where I bought the phone or just the latest stock (4.1) ?
Cheers
EDIT: In the Sony website it says that this is for devices with unlocked bootloader :/
If your phone is being recognised by your pc try using pc companion to fix this. Open pc companion, click on update device then somewhere should be a repair my device hyperlink ( I softbricked my locked bootloader sxs )
Sent from my HTC Desire HD using xda app-developers app
I could get it to go into flashmode but the phone reboots istself eve If I had pressed the Vol Down + Power and waitend for the 3 vibrations...
I plug it into the computer and it turns itself on, thus making the flash process abort.
Besides, I charged it all night, but I cannot turn it on just like that, I have to plug it for a while and the it would turn it self on and get stock in the Sony logo, the I can Press Power + Vol Down but when I plug it in the laptop in flashmode, it turn the led green but then it turns itself on. :/
Note: the phone is not recognized by te PC and I have all the drivers installed
You are aware of the fact that flashmode will time-out in about 42 or 43 seconds if no data is send? So if you have to do something in flashmode first start the process on your computer and when it asks for your phone to be connected in flashmode then connect in flashmode. If you do it before, it will time-out and will loose connection before the flashing is started.
And make sure no other program is trying to install new drivers for your phone. (Like PCC while you are trying to use flashtool or have adb running on your computer alongside PCC)
Good luck!
Verstuurd van mijn Nexus 7 met Tapatalk
Fotogravin said:
You are aware of the fact that flashmode will time-out in about 42 or 43 seconds if no data is send? So if you have to do something in flashmode first start the process on your computer and when it asks for your phone to be connected in flashmode then connect in flashmode. If you do it before, it will time-out and will loose connection before the flashing is started.
Good luck!
Verstuurd van mijn Nexus 7 met Tapatalk
Click to expand...
Click to collapse
Yep, What Im doing is that I start all the process in flashtool and when it asks me to connect in flashmode thats when I take my phone to flashmode an connect it to the laptop.
The thing is that after connecting the phone the led goes green, that is good, but the it turns itself on and gets stock in the Sony Logo, soft reset, hard reset, it doesnt matter
Did you check no other programs are trying to install drivers for your phone?
Verstuurd van mijn Nexus 7 met Tapatalk
which OS do you have (i mean on the laptop) , if its windows 8, then theres gonna be some problems getting to flash mode or fastboot mode, i had the same problem, i wanted to install a kerne via fastboot method, when it was windows 7 all was ok, my pc recognized fastboot mode and all worked out pretty well, after i upgraded windows 7 to 8, my pc didnt allow non-signatured drivers to run, so my pc couldnt recognize fastboot mode, and my phone automatically turned on, i couldnt get into fast boot mode,so, all i had to do was search in google for a solution..how to install fastboot drivers in windows 8 for xperia s, and voilaa...solutions !!
http://forum.xda-developers.com/showthread.php?p=33906508
shyam2010 said:
which OS do you have (i mean on the laptop) , if its windows 8, then theres gonna be some problems getting to flash mode or fastboot mode, i had the same problem, i wanted to install a kerne via fastboot method, when it was windows 7 all was ok, my pc recognized fastboot mode and all worked out pretty well, after i upgraded windows 7 to 8, my pc didnt allow non-signatured drivers to run, so my pc couldnt recognize fastboot mode, and my phone automatically turned on, i couldnt get into fast boot mode,so, all i had to do was search in google for a solution..how to install fastboot drivers in windows 8 for xperia s, and voilaa...solutions !!
http://forum.xda-developers.com/showthread.php?p=33906508
Click to expand...
Click to collapse
My laptop is actually Win 8, but I never had problems. Actually that was the laptop that I used to root it and flash ICS.The phone goes into flashmode, and it is recognized by the flashtool, the thing is that my phone wont stay OFF, it just turns itself on after I soft or hard reset it.
The below is from the flashtool
05/006/2013 03:06:37 - INFO - Please connect your device into flashmode.
05/017/2013 03:17:29 - INFO - Device connected in flash mode
05/017/2013 03:17:29 - INFO - Opening device for R/W
05/017/2013 03:17:29 - INFO - Start Flashing
05/017/2013 03:17:29 - INFO - Processing loader
05/017/2013 03:17:29 - INFO - Checking header
05/017/2013 03:17:29 - INFO - Ending flash session
05/017/2013 03:17:29 - ERROR -
05/017/2013 03:17:29 - ERROR - Error flashing. Aborted
05/017/2013 03:17:30 - INFO - Device connected in flash mode
05/017/2013 03:17:41 - INFO - Device disconnected
Click to expand...
Click to collapse
hi everyone...
i cant find any solution for my xperia m...
suddenly turned of... on charger is red light and appears sony logo stucked and phone is overheating even unpluged
when i connected it to PC (flashtool) via fastboot mode - blue led is lighting
via flashmode - red and then green led is blinking once
flashtool see devices as C1905 - YT910JNFT4 - 1276-4509_R2C - 1272-2325_15.4.A.1.9 - WORLD-i_15.4.A.1.9
rooted and xposed - sure
locked bootloader -not sure
xperia companion and sony pc companion doesnt work for repairing....
i cant flash nothing via any flashtool (last 0.9.21.0)... in flashmode phone is connected only 1min...
if i connect phone with vol- holding win7(64) succesfully installing SOMC Flash Device
with vol+ holding win7(64) succesfully installing Android ADB Interface (S1Boot Fastboot)
try this http://forum.xda-developers.com/showthread.php?t=1849170
syedafzal.shah said:
try this http://forum.xda-developers.com/showthread.php?t=1849170
Click to expand...
Click to collapse
i cant see my problem in that post...
I had the somewhat same problem as you.... Read My Thread.. you may find an answer there .. Here is the Link http://forum.xda-developers.com/xperia-m/help/soft-bricked-hard-bricked-urgent-help-t2789129
Could anyone please help me recovery my hard bricked Xperia XA1 G3112. because I flashed boot image but it went bad
Bootloader is unlocked.
USB Debuggung is on.
The phone can't go to fastboot neither flash mode. no vibration. no blue LED. no green LED.
When connecting the phone to the computer steady red LED go on with sound from the computer detecting a device then disconnect sound every 30 second then reconnected and so on...
on device manager it shows: USB Serial Device COM3.
on flash tool it shows: Device connected with USB debugging off , For 2011 devices line, be sure you are not in MTP mode.
I removed the back cover disconnected the battery then reconnected it then tried to go to fastboot/falsh mode but it didn't go.
I really appreciate any suggestions/help
Please anyone help is the phone completely dead or there's any chance to recover it. only if I could put it in flash mode or fastboot mode will be great
Good evening, I'm living the same thing. In my case, it's the XA1 G3123, but the problem it's the same. The only thing I could see was the red led...
I've tried Emma, Flashtool, Xperia Companion, and none of them recognized the device. Do you know if Is there any software that see a device aparently dead?
Adriano2015 said:
Good evening, I'm living the same thing. In my case, it's the XA1 G3123, but the problem it's the same. The only thing I could see was the red led...
I've tried Emma, Flashtool, Xperia Companion, and none of them recognized the device. Do you know if Is there any software that see a device aparently dead?
Click to expand...
Click to collapse
It's sad that this forum has 4 billion members and no one could help ? I wished that if someone on this forum could confirm that the phone is completely dead or what?
Anyway. I bought a new iPhone and that android junk is still in the drawer ?
First, make sure you have the drivers (flashtool and fastboot) installed.
Then download the ROM corresponding to your XA1, it can be by Flashtool or Xperifirm.
Also have at least 20% battery.
With all of this, with XA1 turned off, open Flashtool,
click the lightning button,
choose Flashmode,
select the downloaded ROM (ftf),
click Flash,
as soon as Flashtool prompts you connect to the PC by pressing the volume button at the same time
(can not remember if it is volume - or volume +, the important thing is that the notification light turns green)
and wait for the process to finish.
It works most of the time.
boyrock said:
First, make sure you have the drivers (flashtool and fastboot) installed.
Then download the ROM corresponding to your XA1, it can be by Flashtool or Xperifirm.
Also have at least 20% battery.
With all of this, with XA1 turned off, open Flashtool,
click the lightning button,
choose Flashmode,
select the downloaded ROM (ftf),
click Flash,
as soon as Flashtool prompts you connect to the PC by pressing the volume button at the same time
(can not remember if it is volume - or volume +, the important thing is that the notification light turns green)
and wait for the process to finish.
It works most of the time.
Click to expand...
Click to collapse
Thanks for the instruction. I did this . but it didn't work, when I press flash a window pops up showing animated "press volume downd and connect your phone to the PC but when I do that nothing happens. the LED light stays red when connection the USB cable. it does not go to flash mode.
I had also tried volume up but that didn't works either.
the phone seems not able to go to flash mode neither fastboot mode.
I also tried removing the battery, press volume down , connect the usb cable then connect the battery back but didn't works.
I tried pressing both volume up and down then connect the usb cable with the battery connected and disconnected but that didn't work either.
I have tried so many combinations buttons with battery in and out. but didn't work.
there's always steady red LED on when connecting the usb cable to pc or to the charger.
I checked all drivers installed correctly. but the problem is the phone does not go to fastboot neither flash mode.
I also don't know more what to do, because none of the buttons or its combinations result in something beyond the same red led. I've installed the usb vcom preload drivers, MTK 67xx drivers and I also tried to desconect the battery and once again changes nothing.
The only thing that happens is the device connecting and disconnecting every 30 seconds in the hardware manager, and no programms or flashers like Flash Tool recognize the smartphone.
If anyone could give any ideas would be helpful, considering my knowledge in cell phones hardware is very low.
https://developer.sony.com/develop/open-devices/get-started/flash-tool/
hld power and vol up, device vibration once, keep holding, release buttons when vibrated three times
phone shut down, no more led
plug usb in pc, not mobile, hold volume down and plug in mobile too after you launched emma
https://developer.sony.com/develop/open-devices/get-started/flash-tool/
emma will detect your device in flashmode and offer you a rom to download and flash, problem solved
maybe not the latest rom for your country but the most common for the device to unbrick
did u find any solution
kosrat-kj said:
did u find any solution
Click to expand...
Click to collapse
Nope.
albertineso said:
Could anyone please help me recovery my hard bricked Xperia XA1 G3112. because I flashed boot image but it went bad
Bootloader is unlocked.
USB Debuggung is on.
The phone can't go to fastboot neither flash mode. no vibration. no blue LED. no green LED.
When connecting the phone to the computer steady red LED go on with sound from the computer detecting a device then disconnect sound every 30 second then reconnected and so on...
on device manager it shows: USB Serial Device COM3.
on flash tool it shows: Device connected with USB debugging off , For 2011 devices line, be sure you are not in MTP mode.
I removed the back cover disconnected the battery then reconnected it then tried to go to fastboot/falsh mode but it didn't go.
I really appreciate any suggestions/help
Click to expand...
Click to collapse
I think that is a battery problem... i'm not sure
MCGARCI88 said:
I think that is a battery problem... i'm not sure
Click to expand...
Click to collapse
Hi,
No, it's not a battery problem, don't change it, that's not the solution... I have the same problem with my XA1 G3121, and I buy a new battery the last week, but nothing change, my phone is always blocked ... the red light stay red when i connect the phone to the PC (or when I connect it to the charger), and directly off when i disconnect it, but the problem stay the same,I can't change the red light in green or blue...
Sorry for my poor English, I'm french and I know sometimes it's difficult to understand my english...
I will see if I can test the Test point because it's the last than I don't test to ressucite my XA1.
If you find a solution to ressucite it, please write me how you do please...
luluberlu81 said:
Hi,
No, it's not a battery problem, don't change it, that's not the solution... I have the same problem with my XA1 G3121, and I buy a new battery the last week, but nothing change, my phone is always blocked ... the red light stay red when i connect the phone to the PC (or when I connect it to the charger), and directly off when i disconnect it, but the problem stay the same,I can't change the red light in green or blue...
Sorry for my poor English, I'm french and I know sometimes it's difficult to understand my english...
I will see if I can test the Test point because it's the last than I don't test to ressucite my XA1.
If you find a solution to ressucite it, please write me how you do please...
Click to expand...
Click to collapse
The sony mobiles are comlicated, i had a xperia z1 with the same issue, and I couldn't fix it, now I have a z5 compact with broken screen, I replaced the screen, and the backlight stopped working... don't worry my english is poor too, i'm spanish
HI!
Another one with same problem! Xperia Xa1 g3123 dead, red led.
During flashing there where a problem (didn´t screenshoot, so, i dont know which one) now, its dead!
I found this guide for z ultra and z1 in this forum. But im not sure it will works with mine.
https://forum.xda-developers.com/showthread.php?t=2646405
luluberlu81 said:
Hi,
No, it's not a battery problem, don't change it, that's not the solution... I have the same problem with my XA1 G3121, and I buy a new battery the last week, but nothing change, my phone is always blocked ... the red light stay red when i connect the phone to the PC (or when I connect it to the charger), and directly off when i disconnect it, but the problem stay the same,I can't change the red light in green or blue...
Sorry for my poor English, I'm french and I know sometimes it's difficult to understand my english...
I will see if I can test the Test point because it's the last than I don't test to ressucite my XA1.
If you find a solution to ressucite it, please write me how you do please...
Click to expand...
Click to collapse
please I've gotten the same problem with my xa1 g3121 too, please were you able to revive your phone...?
Needs help....
Adriano2015 said:
Good evening, I'm living the same thing. In my case, it's the XA1 G3123, but the problem it's the same. The only thing I could see was the red led...
I've tried Emma, Flashtool, Xperia Companion, and none of them recognized the device. Do you know if Is there any software that see a device aparently dead?
Click to expand...
Click to collapse
Same problem here, g3121 totally dead, red light only, nothing else...
tried everything but no avail....
boyrock said:
First, make sure you have the drivers (flashtool and fastboot) installed.
Then download the ROM corresponding to your XA1, it can be by Flashtool or Xperifirm.
Also have at least 20% battery.
With all of this, with XA1 turned off, open Flashtool,
click the lightning button,
choose Flashmode,
select the downloaded ROM (ftf),
click Flash,
as soon as Flashtool prompts you connect to the PC by pressing the volume button at the same time
(can not remember if it is volume - or volume +, the important thing is that the notification light turns green)
and wait for the process to finish.
It works most of the time.
Click to expand...
Click to collapse
i am a newbie. my xperia xa1 lost connection while updating to oreo 8.0. now it has a black screen. when charged or connected to the computer the xa1 has the red light turning but still black screen. i downloaded the latest flashtool and the stock firmware for G3116 but flashtool is saying that there are no drivers loaded.
17/047/2020 20:47:18 - INFO - Flashtool 0.9.31.0
17/047/2020 20:47:18 - INFO - Searching for a web proxy
17/047/2020 20:47:18 - INFO - No proxy found, using direct connection
17/047/2020 20:47:19 - INFO - Loading devices database
17/047/2020 20:47:20 - INFO - Loaded 129 devices
17/047/2020 20:47:20 - INFO - Starting phone detection
17/047/2020 20:47:22 - INFO - Device disconnected
17/047/2020 20:47:40 - INFO - List of connected devices (Device Id) :
17/047/2020 20:47:40 - INFO - List of ADB devices :
17/047/2020 20:47:44 - INFO - - none
17/047/2020 20:47:44 - INFO - List of fastboot devices :
17/047/2020 20:47:44 - INFO - - none
i alreaady installed fastboot but the phone is still not detected by flashtool, emma and companion. what are the drivers for the xa1 inside the flashtool driver package folder?
both in emma and companion are saying that my phone is locked out.
please help me.
XA1 Drivers for Flashtool
boyrock said:
First, make sure you have the drivers (flashtool and fastboot) installed.
Then download the ROM corresponding to your XA1, it can be by Flashtool or Xperifirm.
Also have at least 20% battery.
With all of this, with XA1 turned off, open Flashtool,
click the lightning button,
choose Flashmode,
select the downloaded ROM (ftf),
click Flash,
as soon as Flashtool prompts you connect to the PC by pressing the volume button at the same time
(can not remember if it is volume - or volume +, the important thing is that the notification light turns green)
and wait for the process to finish.
It works most of the time.
Click to expand...
Click to collapse
i am a newbie. my xperia xa1 lost connection while updating to oreo 8.0. now it has a black screen. when charged or connected to the computer the xa1 has the red light turning but still black screen. i downloaded the latest flashtool and the stock firmware for G3116 but flashtool is saying that there are no drivers loaded.
17/047/2020 20:47:18 - INFO - Flashtool 0.9.31.0
17/047/2020 20:47:18 - INFO - Searching for a web proxy
17/047/2020 20:47:18 - INFO - No proxy found, using direct connection
17/047/2020 20:47:19 - INFO - Loading devices database
17/047/2020 20:47:20 - INFO - Loaded 129 devices
17/047/2020 20:47:20 - INFO - Starting phone detection
17/047/2020 20:47:22 - INFO - Device disconnected
17/047/2020 20:47:40 - INFO - List of connected devices (Device Id) :
17/047/2020 20:47:40 - INFO - List of ADB devices :
17/047/2020 20:47:44 - INFO - - none
17/047/2020 20:47:44 - INFO - List of fastboot devices :
17/047/2020 20:47:44 - INFO - - none
i alreaady installed fastboot but the phone is still not detected by flashtool, emma and companion. what are the drivers for the xa1 inside the flashtool driver package folder?
both in emma and companion are saying that my phone is locked out.
please help me.
I know this is a old thread but people you must understand, what happened is that your Sony phone disconnected while flashing the boot.img (so now the phone has no software at all! ) No rom is easy fix, but no bootloader (boot.img) you are sol
These phones have a tendency to do this if you chose the wrong settings before flashing.
So basically you have a lifeless brick (the phone doesn't know it's a phone) that's why it doesn't do nothing but have a red light, the only FIX is JTAG jtagging the device or to swapp the motherboard i have a xa1 ultra from 2018 i bricked, 4 years later i bought a motherboard and swapped it and voila back up and running.
So please flash and root responsibly most soft bricked can be fixed but when you delete the boot.img, only JTAG can save you good luck!!