Hi guys! Sorry for my english. I have Xperia Ion (LT28h) . I installed the program Swapper 2. installed swap and rebooted the phone. now the phone is not included. Telephone defined as qhsusb_dload.
Afther I installed the driver from Flash Tool. instead of qhsusb dload become SEMC flash divice.
Log from Flash Tool
15/054/2014 11:54:45 - INFO - Device connected with USB debugging off
15/054/2014 11:54:45 - INFO - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
But no use. No green/blue does not light diod. Nо can enter in any mode.
I do not know what to do, Help please!
Nick_Holmes said:
Hi guys! Sorry for my english. I have Xperia Ion (LT28h) . I installed the program Swapper 2. installed swap and rebooted the phone. now the phone is not included. Telephone defined as qhsusb_dload.
Afther I installed the driver from Flash Tool. instead of qhsusb dload become SEMC flash divice.
Log from Flash Tool
But no use. No green/blue does not light diod. Nо can enter in any mode.
I do not know what to do, Help please!
Click to expand...
Click to collapse
i got the same problem have u success to works the phone again
any help guys please
Cheers
Swapper has a bad history of deleting the whole OS I've heard. It probably has messed with your bootloader. Can you enter flash/fastboot mode? And swapper only runs on kernels that support it. I doubt that we have any such kernels.
I think I have the same problem here. I already searched everywhere and I'm loosing my hopes. I'm trying to revive a Xperia Ion and this is what I get:
When I plug the phone in the wall charger the red led turns on for some minutes and then turns off, no green leds, my phone was in charger for months, changed charger and cable.
The same happens when I plug on PC, when the led turns off it is detected as "Somc flash device" in windows device manager and this shows in flashtool:
INFO - Device connected with USB debugging off
INFO - For 2011 devices line, be sure you are not in MTP mode
Nothing changes if I plug in pc with volume + or - pressed, it don't goes into fastboot or flashmode.
I hope you could help me. Thanks
Could anyone please help me recovery my hard bricked Xperia XA1 G3112. because I flashed boot image but it went bad
Bootloader is unlocked.
USB Debuggung is on.
The phone can't go to fastboot neither flash mode. no vibration. no blue LED. no green LED.
When connecting the phone to the computer steady red LED go on with sound from the computer detecting a device then disconnect sound every 30 second then reconnected and so on...
on device manager it shows: USB Serial Device COM3.
on flash tool it shows: Device connected with USB debugging off , For 2011 devices line, be sure you are not in MTP mode.
I removed the back cover disconnected the battery then reconnected it then tried to go to fastboot/falsh mode but it didn't go.
I really appreciate any suggestions/help
Please anyone help is the phone completely dead or there's any chance to recover it. only if I could put it in flash mode or fastboot mode will be great
Good evening, I'm living the same thing. In my case, it's the XA1 G3123, but the problem it's the same. The only thing I could see was the red led...
I've tried Emma, Flashtool, Xperia Companion, and none of them recognized the device. Do you know if Is there any software that see a device aparently dead?
Adriano2015 said:
Good evening, I'm living the same thing. In my case, it's the XA1 G3123, but the problem it's the same. The only thing I could see was the red led...
I've tried Emma, Flashtool, Xperia Companion, and none of them recognized the device. Do you know if Is there any software that see a device aparently dead?
Click to expand...
Click to collapse
It's sad that this forum has 4 billion members and no one could help ? I wished that if someone on this forum could confirm that the phone is completely dead or what?
Anyway. I bought a new iPhone and that android junk is still in the drawer ?
First, make sure you have the drivers (flashtool and fastboot) installed.
Then download the ROM corresponding to your XA1, it can be by Flashtool or Xperifirm.
Also have at least 20% battery.
With all of this, with XA1 turned off, open Flashtool,
click the lightning button,
choose Flashmode,
select the downloaded ROM (ftf),
click Flash,
as soon as Flashtool prompts you connect to the PC by pressing the volume button at the same time
(can not remember if it is volume - or volume +, the important thing is that the notification light turns green)
and wait for the process to finish.
It works most of the time.
boyrock said:
First, make sure you have the drivers (flashtool and fastboot) installed.
Then download the ROM corresponding to your XA1, it can be by Flashtool or Xperifirm.
Also have at least 20% battery.
With all of this, with XA1 turned off, open Flashtool,
click the lightning button,
choose Flashmode,
select the downloaded ROM (ftf),
click Flash,
as soon as Flashtool prompts you connect to the PC by pressing the volume button at the same time
(can not remember if it is volume - or volume +, the important thing is that the notification light turns green)
and wait for the process to finish.
It works most of the time.
Click to expand...
Click to collapse
Thanks for the instruction. I did this . but it didn't work, when I press flash a window pops up showing animated "press volume downd and connect your phone to the PC but when I do that nothing happens. the LED light stays red when connection the USB cable. it does not go to flash mode.
I had also tried volume up but that didn't works either.
the phone seems not able to go to flash mode neither fastboot mode.
I also tried removing the battery, press volume down , connect the usb cable then connect the battery back but didn't works.
I tried pressing both volume up and down then connect the usb cable with the battery connected and disconnected but that didn't work either.
I have tried so many combinations buttons with battery in and out. but didn't work.
there's always steady red LED on when connecting the usb cable to pc or to the charger.
I checked all drivers installed correctly. but the problem is the phone does not go to fastboot neither flash mode.
I also don't know more what to do, because none of the buttons or its combinations result in something beyond the same red led. I've installed the usb vcom preload drivers, MTK 67xx drivers and I also tried to desconect the battery and once again changes nothing.
The only thing that happens is the device connecting and disconnecting every 30 seconds in the hardware manager, and no programms or flashers like Flash Tool recognize the smartphone.
If anyone could give any ideas would be helpful, considering my knowledge in cell phones hardware is very low.
https://developer.sony.com/develop/open-devices/get-started/flash-tool/
hld power and vol up, device vibration once, keep holding, release buttons when vibrated three times
phone shut down, no more led
plug usb in pc, not mobile, hold volume down and plug in mobile too after you launched emma
https://developer.sony.com/develop/open-devices/get-started/flash-tool/
emma will detect your device in flashmode and offer you a rom to download and flash, problem solved
maybe not the latest rom for your country but the most common for the device to unbrick
did u find any solution
kosrat-kj said:
did u find any solution
Click to expand...
Click to collapse
Nope.
albertineso said:
Could anyone please help me recovery my hard bricked Xperia XA1 G3112. because I flashed boot image but it went bad
Bootloader is unlocked.
USB Debuggung is on.
The phone can't go to fastboot neither flash mode. no vibration. no blue LED. no green LED.
When connecting the phone to the computer steady red LED go on with sound from the computer detecting a device then disconnect sound every 30 second then reconnected and so on...
on device manager it shows: USB Serial Device COM3.
on flash tool it shows: Device connected with USB debugging off , For 2011 devices line, be sure you are not in MTP mode.
I removed the back cover disconnected the battery then reconnected it then tried to go to fastboot/falsh mode but it didn't go.
I really appreciate any suggestions/help
Click to expand...
Click to collapse
I think that is a battery problem... i'm not sure
MCGARCI88 said:
I think that is a battery problem... i'm not sure
Click to expand...
Click to collapse
Hi,
No, it's not a battery problem, don't change it, that's not the solution... I have the same problem with my XA1 G3121, and I buy a new battery the last week, but nothing change, my phone is always blocked ... the red light stay red when i connect the phone to the PC (or when I connect it to the charger), and directly off when i disconnect it, but the problem stay the same,I can't change the red light in green or blue...
Sorry for my poor English, I'm french and I know sometimes it's difficult to understand my english...
I will see if I can test the Test point because it's the last than I don't test to ressucite my XA1.
If you find a solution to ressucite it, please write me how you do please...
luluberlu81 said:
Hi,
No, it's not a battery problem, don't change it, that's not the solution... I have the same problem with my XA1 G3121, and I buy a new battery the last week, but nothing change, my phone is always blocked ... the red light stay red when i connect the phone to the PC (or when I connect it to the charger), and directly off when i disconnect it, but the problem stay the same,I can't change the red light in green or blue...
Sorry for my poor English, I'm french and I know sometimes it's difficult to understand my english...
I will see if I can test the Test point because it's the last than I don't test to ressucite my XA1.
If you find a solution to ressucite it, please write me how you do please...
Click to expand...
Click to collapse
The sony mobiles are comlicated, i had a xperia z1 with the same issue, and I couldn't fix it, now I have a z5 compact with broken screen, I replaced the screen, and the backlight stopped working... don't worry my english is poor too, i'm spanish
HI!
Another one with same problem! Xperia Xa1 g3123 dead, red led.
During flashing there where a problem (didn´t screenshoot, so, i dont know which one) now, its dead!
I found this guide for z ultra and z1 in this forum. But im not sure it will works with mine.
https://forum.xda-developers.com/showthread.php?t=2646405
luluberlu81 said:
Hi,
No, it's not a battery problem, don't change it, that's not the solution... I have the same problem with my XA1 G3121, and I buy a new battery the last week, but nothing change, my phone is always blocked ... the red light stay red when i connect the phone to the PC (or when I connect it to the charger), and directly off when i disconnect it, but the problem stay the same,I can't change the red light in green or blue...
Sorry for my poor English, I'm french and I know sometimes it's difficult to understand my english...
I will see if I can test the Test point because it's the last than I don't test to ressucite my XA1.
If you find a solution to ressucite it, please write me how you do please...
Click to expand...
Click to collapse
please I've gotten the same problem with my xa1 g3121 too, please were you able to revive your phone...?
Needs help....
Adriano2015 said:
Good evening, I'm living the same thing. In my case, it's the XA1 G3123, but the problem it's the same. The only thing I could see was the red led...
I've tried Emma, Flashtool, Xperia Companion, and none of them recognized the device. Do you know if Is there any software that see a device aparently dead?
Click to expand...
Click to collapse
Same problem here, g3121 totally dead, red light only, nothing else...
tried everything but no avail....
boyrock said:
First, make sure you have the drivers (flashtool and fastboot) installed.
Then download the ROM corresponding to your XA1, it can be by Flashtool or Xperifirm.
Also have at least 20% battery.
With all of this, with XA1 turned off, open Flashtool,
click the lightning button,
choose Flashmode,
select the downloaded ROM (ftf),
click Flash,
as soon as Flashtool prompts you connect to the PC by pressing the volume button at the same time
(can not remember if it is volume - or volume +, the important thing is that the notification light turns green)
and wait for the process to finish.
It works most of the time.
Click to expand...
Click to collapse
i am a newbie. my xperia xa1 lost connection while updating to oreo 8.0. now it has a black screen. when charged or connected to the computer the xa1 has the red light turning but still black screen. i downloaded the latest flashtool and the stock firmware for G3116 but flashtool is saying that there are no drivers loaded.
17/047/2020 20:47:18 - INFO - Flashtool 0.9.31.0
17/047/2020 20:47:18 - INFO - Searching for a web proxy
17/047/2020 20:47:18 - INFO - No proxy found, using direct connection
17/047/2020 20:47:19 - INFO - Loading devices database
17/047/2020 20:47:20 - INFO - Loaded 129 devices
17/047/2020 20:47:20 - INFO - Starting phone detection
17/047/2020 20:47:22 - INFO - Device disconnected
17/047/2020 20:47:40 - INFO - List of connected devices (Device Id) :
17/047/2020 20:47:40 - INFO - List of ADB devices :
17/047/2020 20:47:44 - INFO - - none
17/047/2020 20:47:44 - INFO - List of fastboot devices :
17/047/2020 20:47:44 - INFO - - none
i alreaady installed fastboot but the phone is still not detected by flashtool, emma and companion. what are the drivers for the xa1 inside the flashtool driver package folder?
both in emma and companion are saying that my phone is locked out.
please help me.
XA1 Drivers for Flashtool
boyrock said:
First, make sure you have the drivers (flashtool and fastboot) installed.
Then download the ROM corresponding to your XA1, it can be by Flashtool or Xperifirm.
Also have at least 20% battery.
With all of this, with XA1 turned off, open Flashtool,
click the lightning button,
choose Flashmode,
select the downloaded ROM (ftf),
click Flash,
as soon as Flashtool prompts you connect to the PC by pressing the volume button at the same time
(can not remember if it is volume - or volume +, the important thing is that the notification light turns green)
and wait for the process to finish.
It works most of the time.
Click to expand...
Click to collapse
i am a newbie. my xperia xa1 lost connection while updating to oreo 8.0. now it has a black screen. when charged or connected to the computer the xa1 has the red light turning but still black screen. i downloaded the latest flashtool and the stock firmware for G3116 but flashtool is saying that there are no drivers loaded.
17/047/2020 20:47:18 - INFO - Flashtool 0.9.31.0
17/047/2020 20:47:18 - INFO - Searching for a web proxy
17/047/2020 20:47:18 - INFO - No proxy found, using direct connection
17/047/2020 20:47:19 - INFO - Loading devices database
17/047/2020 20:47:20 - INFO - Loaded 129 devices
17/047/2020 20:47:20 - INFO - Starting phone detection
17/047/2020 20:47:22 - INFO - Device disconnected
17/047/2020 20:47:40 - INFO - List of connected devices (Device Id) :
17/047/2020 20:47:40 - INFO - List of ADB devices :
17/047/2020 20:47:44 - INFO - - none
17/047/2020 20:47:44 - INFO - List of fastboot devices :
17/047/2020 20:47:44 - INFO - - none
i alreaady installed fastboot but the phone is still not detected by flashtool, emma and companion. what are the drivers for the xa1 inside the flashtool driver package folder?
both in emma and companion are saying that my phone is locked out.
please help me.
I know this is a old thread but people you must understand, what happened is that your Sony phone disconnected while flashing the boot.img (so now the phone has no software at all! ) No rom is easy fix, but no bootloader (boot.img) you are sol
These phones have a tendency to do this if you chose the wrong settings before flashing.
So basically you have a lifeless brick (the phone doesn't know it's a phone) that's why it doesn't do nothing but have a red light, the only FIX is JTAG jtagging the device or to swapp the motherboard i have a xa1 ultra from 2018 i bricked, 4 years later i bought a motherboard and swapped it and voila back up and running.
So please flash and root responsibly most soft bricked can be fixed but when you delete the boot.img, only JTAG can save you good luck!!