Related
I'm stuck I can't mount usb storage in cwm recovery and my phone won't boot into ROM. I used heimdall method to root my phone via mac. How can I flash another ROM? Would I be able to adb push a ROM to internal memory? Any help is greatly appreciated.
Or how's about how can i just brick it then return to sprint? I have the Sprint warranty.
sent from America...F__k Yeah!
Can you boot into download mode?
Sent from Team KC's founding member.
I'm not sure what is heimdall method and how it works but the best way would be going to download mode (vol down + power at the same time) like kc said. If it works then you need to flash the rom again from there.
I can get into download mode. How do I flash from there?
sent from America...F__k Yeah!
Did you try and remove battery then restart phone into download mode?
Jabawockee said:
I can get into download mode. How do I flash from there?
Click to expand...
Click to collapse
You aren't bricked (at least what you described so far doesn't indicate a brick).
What did you flash initially?
Assuming you are familiar with Heimdall (cross-platform equivalent of ODIN), since you flashed something earlier, you can look in the appropriate ODIN thread, in my signature, to get the modem/kernel/ROM to flash. The individual components are in the 2nd posts of each respective thread.
if you've got a rom or a backup on your phones sd card, then just use the same method in heimdall that you used to root; you'll get a kernel with recovery to load, and then flash a rom or restore your backup from there..
Easy Peasy, I;ve had to do that a few times so far..
I've been having issue with my Sprint Note 2 for a while. I've also posted this to Reddit and other parts of the forum but so far have gotten no way to fix my issue. Here's the link to Reddit: http://www.reddit.com/r/techsupport...nt_note_2_sphl900_bricked_after_attempted_43/
Sorry, I didn't want to type that all up again and having to deal with formatting and such.
Basically, the gist of it, from what I can gather is that I have accidentally loaded the 4.3 bootloader with KNOX and it is currently preventing me from doing anything productive (flashing CWMR, rooting, installing stock, etc). I read here on the forum that there were ways to do so, especially this post: http://forum.xda-developers.com/showthread.php?p=46861777
I was wondering if there were steps for the Sprint Note 2 SPH-L900?
Any help in debricking my phone is appreciated.
Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.
QuantumInteger said:
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.
Click to expand...
Click to collapse
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe
louforgiveno said:
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe
Click to expand...
Click to collapse
I tried 3.07, 3.09, and even barebone 1.85 that came with CF auto root. It doesn't work. I can't load recovery just fine (according to ODIN) but I can't get into Recovery.
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse
...My God..... What ever you did, it worked. Turns out, Caboomi's file didn't work too well. I couldn't get CWMR working at all even after converting to .tar. I used TWRP instead and it works. Problem was that it asked me for my password, which I don't know since I tried everything, so I had to resort to wiping everything. I installed the file jlmancuso suggested, loading it onto SD card then flashing using TWRP, and now my Samsung Note 2 is debricked.
Your file was a godsend. Thank you!
No recovery stuck on bootloop
im having the same issue could you post that dropbox link again
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse
rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader
Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MJA bootloader
Click to expand...
Click to collapse
MJA ? Isn't that an s4 bootloader?
louforgiveno said:
MJA ? Isn't that an s4 bootloader?
Click to expand...
Click to collapse
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out
my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app
---------- Post added at 06:23 PM ---------- Previous post was at 06:14 PM ----------
Keithgordon said:
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out
Click to expand...
Click to collapse
my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app
yea I still cant dowload it sorry for being a pest.
Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader
Click to expand...
Click to collapse
hello if you are online i need some help i dl the 4.3 note 2 update it has a different build than the one sprint has there are some features that are not on this build is there any way for me to get the ota from sprint
rckingws6 said:
yea I still cant dowload it sorry for being a pest.
Click to expand...
Click to collapse
rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse
i need some help
yea i can get into twrp recovery now but my sdcard wont mount thats why im trying to use odin
QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse
For those of you who have bricked Note 2s (SPH-L900), I'm going to drop a DropBox link here to a folder of ALL of the files that I used to unbrick my phone. I experimented with multiple methods (and several sleepless nights). Some of them will be useful to you, not all. I have the Android SDK and Caboomi's converter for .img to .tar. It doesn't work too well for CWMR just FYI. ODIN-OC will attempt to load stock MC2 onto your phone but it won't work if it's bricked. Arc Converter is a program I used to try convert the MK4 .zip file to .tar to try and flash an update using ODIN. It didn't work. The steps that I took to unbrick my phone will be posted after the link.
https://www.dropbox.com/sh/c2bfpfdf0qbs6bu/ZiNC-BF5kf
Be patient. Some of the files are still updating.
Steps:
1) Put your phone into Download mode by holding volume down + power + home button at bootup
2) Use ODIN (3.07 or 3.09) to load the 4.3_Unbrick.tar file. This will take a bit of time so be patient. Once the phone boots up again, you'll get past the boot screen that says "Samsung Galaxy Note II" and you'll get the Samsung logo with the spinning icon but it will loop. This is normal.
3) Next, power off (yank the battery and cable, leave battery out but plug the cable back in) and reboot into download.
4) Flash the TWRP .tar file (don't try converting the CWMR to .tar, it won't work) then reboot.
5) Hold volume up + power + home button (be patient here)
6) You should see the Team Win logo. You're now in recovery. The TWRP may ask you for the password. It is NOT the passcode to your lockscreen or your Google password. I have no idea what it is. At this point, you'd have to wipe your phone (internal only) if you want to flash the stock recovery.
7) Load the MC2 stock recovery file with counter reset onto a microSD card and mount it onto the phone (play around with TWRP, if it doesn't see the SD card the first time, restart or play with the mount function). Just be careful not to wipe your microSD card.
8) Flash the stock recovery (give it time) and it'll restart. You should be back at 4.1.2.
EXTRA STEPS
If you're still interested in 4.3, load the MK4 update onto the microSD card as well. BEFORE you go through the activation process for the 4.1.2 firmware at boot, boot into recovery. Flash the 4.3 update using stock recovery. This should put you onto 4.3 after the phone reboots. You should now have stock 4.3 (no root).
Sorry for all the download errors, I am uploading to my websight right now and as soon as it uploads, I will post the URL, it should download much faster too. I didnt realize so many people needed it
I woke up this morning to my phone perpetually rebooting.
I was running a nightly of CM 11.
Now when I try to go into Recovery I get a screen that asks for a password. I have no idea what that password is as I did not set one. I tried wiping data to no avail. I tried flashing a new recovery via Odin this did not work (Odin said successful but the screen on the phone never showed the transfer of the file). No matter what wipe method I use in recovery it just says fail, doesn't work at all and hangs or will say it can't mount. I have searched and searched and tried and tried and I'm stuck. I even tried ADB that didn't work either. Please help!
Try flashing Philz Touch (based on CWM) over TWRP via Odin. I have always had good luck with CWM and Philz.
Download the tar version: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
audit13 said:
Try flashing Philz Touch (based on CWM) over TWRP via Odin. I have always had good luck with CWM and Philz.
Download the tar version: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
Click to expand...
Click to collapse
I tried this already. I cannot flash ANYTHING via ODIN. Odin states that the process completed but the bar on the phone on the download screen never shows up to show that it has accepted a file.
therecker said:
I tried this already. I cannot flash ANYTHING via ODIN. Odin states that the process completed but the bar on the phone on the download screen never shows up to show that it has accepted a file.
Click to expand...
Click to collapse
Did you unchecked F . reset and unchecked auto reboot when you flashed recovery in Odin? After you flash the file you have to pull the battery then replace it and boot to recovery do not allow the phone to boot to OS or you have to flash again as your recovery will only stick if you pull the battery and boot to recovery after flashing it. After you get into it the first time all will be well with the world again you can flash your heart out.
I had twrp ask me for a password once I hit the back arrow key and told it to mount my external SD card then flashed my rom, bootloader, kernel and modem then rebooted no problem.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
theramsey3 said:
Did you unchecked F . reset and unchecked auto reboot when you flashed recovery in Odin? After you flash the file you have to pull the battery then replace it and boot to recovery do not allow the phone to boot to OS or you have to flash again as your recovery will only stick if you pull the battery and boot to recovery after flashing it. After you get into it the first time all will be well with the world again you can flash your heart out.
I had twrp ask me for a password once I hit the back arrow key and told it to mount my external SD card then flashed my rom, bootloader, kernel and modem then rebooted no problem.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
This did not work. When I use ODIN all that is happening is that ODIN says it has succeeded but the little progress bar that usually shows up on the phone when you are in download mode never comes up. I did try this method though and it didn't work.
I restarted the phone in ODIN mode then opened ODIN then connected the USB cable then unchecked the two boxes you mentioned then flashed a new non TWRP recovery then waited for ODIN to say successful then the phone never showed the progress bar so I waited 2 mins until I pulled the battery then I restarted phone directly to recovery and still have the password prompt. Even after hitting cancel I cannot interact with recovery because every option I choose just says fail. I cannot even mount external sd card.
What phone do you have? What was the most recent stock ROM on your phone? Maybe you can flash a stock ROM.
There is a copy of the stock Samsung 3e recovery (which we can't use to flash zips with) I'm curious if maybe it can overwrite what you have going on? On the password screen I wasn't hitting cancel I was simply hitting the back arrow key. I will see if I have a copy of the stock recovery, just maybe you can flash it then flash another recovery after that so you can fix your phone.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I have Samsung Galaxy S 3 At&T (d2att) SGH-I747 whichever one of those you want. The most recent stock rom on the phone was when I bought it brand new a few months after it came out. I tried installing a stock rom. I tried this using ODIN and it failed. The issue here is that TWRP somehow encrypted the entire file system so NOTHING at all in recovery works. When I use ODIN mode it never shows on my phone that it is accepting a transfer from the computer. When I tried the stock rom via ODIN method it actually failed in ODIN instead of telling me it succeeded and then just not work. It failed at the point when it says Firmware Update Start...aboot.mbn...NAND Write Start!...Complete(Write) operation failed. I am up for any suggestions but I need them to be detailed instructions because I have tried so many things I need to know what exact steps to follow.
I believe the aboot file is a bootloader. Did you ever have a stock 4.3 ROM on the phone? If you did, it probably has the stock 4.3 AT&T bootloader which cannot be downgraded without bricking the phone which means you cannot flash a ROM with an older bootloader via Odin.
audit13 said:
I believe the aboot file is a bootloader. Did you ever have a stock 4.3 ROM on the phone? If you did, it probably has the stock 4.3 AT&T bootloader which cannot be downgraded without bricking the phone which means you cannot flash a ROM with an older bootloader via Odin.
Click to expand...
Click to collapse
To my knowledge I never had a stock 4.3 ROM on the phone. The only stock ROM to touch this phone was the one that came on it. So be specific what are you actually suggesting in this post that I do?
therecker said:
To my knowledge I never had a stock 4.3 ROM on the phone. The only stock ROM to touch this phone was the one that came on it. So be specific what are you actually suggesting in this post that I do?
Click to expand...
Click to collapse
I am surprised that the aboot file was giving you a problem because the bootloader can be downgraded as long as it is not a 4.3 bootloader.
Do you recall exactly which ROM was on the phone when you got it? Where did you get the stock ROM?
audit13 said:
I am surprised that the aboot file was giving you a problem because the bootloader can be downgraded as long as it is not a 4.3 bootloader.
Do you recall exactly which ROM was on the phone when you got it? Where did you get the stock ROM?
Click to expand...
Click to collapse
It was a CM11 Nightly ROM from the very beginning of February. And before that it was a CM10.2 Stable ROM.
Which stock ROM was on your phone before you loaded a custom ROM?
audit13 said:
Which stock ROM was on your phone before you loaded a custom ROM?
Click to expand...
Click to collapse
I have no idea. It was when I first got the phone in November of 2012.
Sounds like your phone may be running a 4.3 bootloader which means your bootloader is locked and cannot be downgraded. This may explain why you are getting errors when trying to flash Odin. There is no stock AT&T 4.3 ROM that can be flashed via Odin.
I follow this thread: http://forum.xda-developers.com/showthread.php?t=2549068
I put this file on the sd card debrick-SGH-I747U-CUEMJB3.img, made sure phone battery was charged up. Tried to enter download mode, it completely skipped it and phone is now running stock 4.3?? I try to enter recovery mode and it still just starts up with Stock 4.3.
So I assume it is running completely of the sd card. I can enter Stock Recovery but not sure what I do now. If i pull the card the phone is dead like before. Red light when plugged in, nothing happens with any button pushes.
I guess I am wondering what my next step is?
Thanks
Ruscicap said:
I follow this thread: http://forum.xda-developers.com/showthread.php?t=2549068
I put this file on the sd card debrick-SGH-I747U-CUEMJB3.img, made sure phone battery was charged up. Tried to enter download mode, it completely skipped it and phone is now running stock 4.3?? I try to enter recovery mode and it still just starts up with Stock 4.3.
So I assume it is running completely of the sd card. I can enter Stock Recovery but not sure what I do now. If i pull the card the phone is dead like before. Red light when plugged in, nothing happens with any button pushes.
I guess I am wondering what my next step is?
Thanks
Click to expand...
Click to collapse
The device is indeed booting off the SD card. However, if you can boot into system, you should also be able to boot into download and recovery modes using the 3-button combo. If you can get into download mode, you can try using Odin v 3.07 to flash the complete 4.3 stock image. Download the Odin flashable zip file from the link below to your computer. Extract the tar.md5 file and verify the MD5 to be sure it downloaded correctly.
http://www.androidfilehost.com/?fid=23329332407590581
Download Odin v3.07 and run Odin.exe for the flashing tool. With your debrick card, boot into download mode by pressing the Volume Down, Home and Power button. If you can't get into download mode with the 3-button combo, suggest you try a USB jig. Use Odin to flash the stock file to your phone. If the flashing is successful, the device should be able to boot normally after this without the debrick card.
Cool thanks Larry2999. I will have to go the USB jig route it won't go into recovery or download. I can only get into Stock recovery. Any specifics I need to know when getting a usb jig? Thanks again for you response. I am just glad it is working now. But probably don't want to run off SD forever.
Ruscicap said:
Cool thanks Larry2999. I will have to go the USB jig route it won't go into recovery or download. I can only get into Stock recovery. Any specifics I need to know when getting a usb jig? Thanks again for you response. I am just glad it is working now. But probably don't want to run off SD forever.
Click to expand...
Click to collapse
There is a thread somewhere on how to make a D-I-Y jig. You can, however, buy it cheaply online for about $3. In buying one, you'd only need to be sure it states that it works with the S3.
Looks like you are able to get into recovery now but you have stock, rather than custom, recovery. There is only one recovery partition and the default is stock, unless, you flash a custom recovery. If you had custom recovery, it would have been possible to flash a 4.3 stock restore zip via (custom) recovery. To flash custom recovery, however, you'd need Odin in download mode so we are back to the problem with getting into download mode.
Thanks Larry ordering jig tomorrow
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Larry2999 said:
There is a thread somewhere on how to make a D-I-Y jig. You can, however, buy it cheaply online for about $3. In buying one, you'd only need to be sure it states that it works with the S3.
Looks like you are able to get into recovery now but you have stock, rather than custom, recovery. There is only one recovery partition and the default is stock, unless, you flash a custom recovery. If you had custom recovery, it would have been possible to flash a 4.3 stock restore zip via (custom) recovery. To flash custom recovery, however, you'd need Odin in download mode so we are back to the problem with getting into download mode.
Click to expand...
Click to collapse
Do you suggest a reliable 4.3 stock to flash or install through ODIN? This is how I got to where I am, something screwed up trying to install stock 4.3 through ODIN.
Thanks again for your help. Jig should be here in a couple days.
Ruscicap said:
Do you suggest a reliable 4.3 stock to flash or install through ODIN? This is how I got to where I am, something screwed up trying to install stock 4.3 through ODIN.
Thanks again for your help. Jig should be here in a couple days.
Click to expand...
Click to collapse
Yes, the ONLY way to recover is to flash a complete 4.3 stock image. Are you sure you bricked in the first instance by flashing 4.3 via Odin? The only Odin compatible stock 4.3 file I'm aware of is the one in the link I forwarded earlier. This was only recently developed and appears to have been used by several people without problem. You may check to be sure you were not trying to flash a 4.1.1 file in error. Apologies if I sound like I'm second guessing you but flashing 4.1.1 via Odin usually results in the kind of hard brick you experienced.
The other alternative would be to flash custom recovery (TWRP or CWM) via Odin and then use custom recovery to flash a complete 4.3 stock image. You will find the instructions in the following thread ...
http://forum.xda-developers.com/showthread.php?t=2658486
Download the stock restore zip for your preferred custom recovery option to your PC and save to your phone's internal storage. If you want to use TWRP, you can find the Odin flashable file for TWRP via the link below ...
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
If, however, you go the first option and flash the 4.3 file via Odin, be sure to use Odin v 3.07. You'll see the Odin flashable file and instructions on page 4 of the following thread ...
http://forum.xda-developers.com/showthread.php?t=2722660&page=4
or you can download directly from here ...
http://www.androidfilehost.com/?fid=23329332407590581
Thanks again. Not really sure what went wrong, tried to use odin to install 4.3 Stock from this thread. http://forum.xda-developers.com/showthread.php?t=2658486
I will try to follow your threads and get it right this time.
Ruscicap said:
Thanks again. Not really sure what went wrong, tried to use odin to install 4.3 Stock from this thread. http://forum.xda-developers.com/showthread.php?t=2658486
I will try to follow your threads and get it right this time.
Click to expand...
Click to collapse
The file from that thread is for (custom) recovery only. You can't flash zips via Odin so if you are using that file, you would need to first install custom recovery via Odin and then flash the zip via custom recovery.
Hey Larry, just wanted to say thanks. Phone is back working properly, 4.3 installed with no problem. Took me awhile never had the time. So fathers day was my chance to get this working. Flashed twrp and then the stock zip. Worked great.
Thanks again for all your help, I very much appreciate it.
Ruscicap said:
Hey Larry, just wanted to say thanks. Phone is back working properly, 4.3 installed with no problem. Took me awhile never had the time. So fathers day was my chance to get this working. Flashed twrp and then the stock zip. Worked great.
Thanks again for all your help, I very much appreciate it.
Click to expand...
Click to collapse
Glad to know it's working OK now. Kind regards
So I bricked my phone... yep
Basically, what I did was I flashed a stock rom for the international version of the GS3 instead of my AT&T version, which caused it to brick
But that's okay because I did the SD Card thing where you use the debrick.img on the card, which this is my second time doing this, so I'm used to it.
I got it to boot up.
But here's the problem:
I have no way of connecting the phone to a computer because the charging port in the phone is broken! So I'm stuck using the stock recovery, and every time I try to flash a stock rom, via SD card, it gives me the error:
E:Signature Verification Failed
I've tried a couple of different stock roms even from SamMobile.com but none of them seem to work.
So where can I find a signed, verified stock rom that will pass the test and allow me to flash the rom with the SD card?
Or is there some other workaround?
xRocketCat said:
So I bricked my phone... yep
Basically, what I did was I flashed a stock rom for the international version of the GS3 instead of my AT&T version, which caused it to brick
But that's okay because I did the SD Card thing where you use the debrick.img on the card, which this is my second time doing this, so I'm used to it.
I got it to boot up.
But here's the problem:
I have no way of connecting the phone to a computer because the charging port in the phone is broken! So I'm stuck using the stock recovery, and every time I try to flash a stock rom, via SD card, it gives me the error:
E:Signature Verification Failed
I've tried a couple of different stock roms even from SamMobile.com but none of them seem to work.
So where can I find a signed, verified stock rom that will pass the test and allow me to flash the rom with the SD card?
Or is there some other workaround?
Click to expand...
Click to collapse
I've never used a debrick image, so I don't know if this would work. Just an idea to try and get around the broken USB port.
Could you root the debrick ROM with some app based method like Towelroot? It is probably vulnerable unless it is based on one of the newest stock ROMs. Once you have root, use an app like Flashify to flash a custom recovery, and then you should be able to flash back anything you need.
I'm not sure what you mean, I don't think the debrick img is a rom because my phone won't boot passed the GS3 screen. There's no way to get into the phone, all I have is download mode and stock recovery and that's it.
xRocketCat said:
I'm not sure what you mean, I don't think the debrick img is a rom because my phone won't boot passed the GS3 screen. There's no way to get into the phone, all I have is download mode and stock recovery and that's it.
Click to expand...
Click to collapse
My mistake. I thought the debrick images got you into a working stock rom, just based off your external SD. Thankfully I've never had to use one.
Try this TWRP-2.7.1.0-d2att https://mega.co.nz/#!Qwgy3DzB!0geWEcBY14ftWVNzKfN3L-A757ntaMcHl9_Mv9vHmqs copy it to internal memory and rename it to update. zip
Go into stock recovery flash and after reboot back into recovery flash UPDATE-SuperSU-v1.51
https://mega.co.nz/#!doQhHCjK!E5BpKeSNKLzkFqZo8MpvGh6VYQPsjNKTSs0awR2d0m8
Sent from my SAMSUNG-SGH-I747 using Tapatalk