Develop Bugs

New rom on phone - USB connection no longer works

I've successfully installed the Open Desire rom on my HTC Desire, but if I try to plug in my phone to my PC I get a windows noise (asif a USB device is connected), but no access to the actual device (e.g. the drive doesnt appear in my computer).
Any ideas on what to do? It was working fine on the same PC before installing a new rom...
Thanks.

Vistrix said:
I've successfully installed the Open Desire rom on my HTC Desire, but if I try to plug in my phone to my PC I get a windows noise (asif a USB device is connected), but no access to the actual device (e.g. the drive doesnt appear in my computer).
Any ideas on what to do? It was working fine on the same PC before installing a new rom...
Thanks.
Click to expand...
Click to collapse
enable usb debugging...

cyron_at said:
enable usb debugging...
Click to expand...
Click to collapse
Its enabled like before... my phone says its in usb debugging mode when I plug it in but theres no device available to select from my computer...

USB brick?
Sent from my Evil Lair using Doomsday Device

Ok I tried plugging into a different PC (which it hasnt been connected to yet), it goes to install the phone USB drivers and then it comes up with "USB Device not Recognised" in windows XP...

Vistrix said:
Ok I tried plugging into a different PC (which it hasnt been connected to yet), it goes to install the phone USB drivers and then it comes up with "USB Device not Recognised" in windows XP...
Click to expand...
Click to collapse
Sounds like the usb brick as mentioned above.
What recovery method did you use? Is your phone seeing the sd card?

I had the same problem, can you install from Market? I fixed the problem by changing the default install location for the apps.
http://forum.xda-developers.com/showthread.php?t=742379
Now I can connect both discdrive mode and htc sync. Latest OTA did this for me.

Windows won't recognize t989

Hello all!
First: I promise I searched the forums and google as hard as I could!
I'm running AOKP JB with CWM, although the problem was present on stock ICS from T-Mobile.
Symptoms: Computer and phone will refuse to acknowledge any connection (nothing shows up in Device Manager), except the phone will still charge. If I do the "remove the battery with USB plugged in" trick, the first time I do it, it will recognize an unknown device, but kies and adb won't recognize it. If I unplug it and plug it back in, it'll go back to not acknowledging any connection.
I previously programmed it (when I was still running stock ROM) via ADB via WiFi, but I need to be able to use ADB via USB. Besides, I can't seem to get ADB over WiFi anymore.
When I plug it into a different computer (Win7), it will, however, recognize my phone.
Earlier this year, before I ever tried programming via WiFi, it connected to my Win8 machine with no problem. I don't think it's a problem with the wifi setup though because the ROM was reinstalled and of course I've restarted ADB in USB mode in the months since...
What I've tried:
Reinstalling Kies
Reinstalling Samsung USB drivers
[^]Restarting the ADB server
Updating ADB
Trying different USB cables
Trying different USB ports
Toggling USB debugging
Toggling MTP mode
The UART thing from the dialer
Restarting the phone and the computer (of course)
Checking to see if my computer's USB drivers need to be updated
The android terminal command "setprop persist.sys.usb.config mass_storage,adb"
Pulling and replacing the battery while connected via USB
Crying in a corner
If anyone can help me, it'd be greatly appreciated! I'm all out of ideas and Google is no longer helpful =/

try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??

krazierokz said:
try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??
Click to expand...
Click to collapse
I tried on my work computer that didn't have any samsung drivers and when the "unknown device" dialog popped up it didn't do anything or install anything, nor did it show up in Device Manager. Unplugging and replugging it back in did not reproduce the dialog box. Togged USB Debugging and still no dialog box saying it recognized it.
The thing with the samsung drivers is that they're self installing so even if it popped up in Device Manager, I wouldn't be able to manually update the drivers =/
I tried MTP both with and without USB Debugging, although it also gives the option for PTP.
At this point do you think I should unroot and go back to stock? It's not been recognized on three computers now! =[

Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2

foltz61 said:
Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Both the stock cable and a generic cable.

Similar problem
Similar problem as the OP. And hi guys, it's nice to be on these forums.
My device, when I plug it in using the stock cable, doesn't even charge. It doesn't show up in device manager, nor does it give me a notification, or say it's unsupported and bear that yellow icon. I have tried using different USB ports, I have tried the toggling USB debugging, I have tried restarting phone, computer, and taking out battery. I have tried that PDA/MODEM dialer trick. I am using 4.1.2 Jellybean, not rooted. (that WAS my goal,, until I hit this roadblock) I have not connected it to the computer in the past, it's relatively new. I'm thinking the cable is bust.
Any suggestions would be appreciated. It charges fine through a wall outlet plug, be it generic or stock.

so guys ive come to a conclusion i think its something in the samsung usb cables try getting yourself a blackberry usb cable , TRUST ME !!! ever since i got my phoness etc... tablet and yadi yadi samsung usb cables have always seemed to give me problems i think its because they are multi data/charging cables and when using the blackberry usb cable i have never ever once encountered a problem with any of my phones sd/storage problems do yourself a favor and pick up one of those cables and you will be golden !! if not then i guess im the only lucky one :LOL here you go http://www.amazon.com/Blackberry-Travel-Adapter-Micro-Cable/dp/B004VMVSYK/ref=pd_sim_cps_2 5 bucks!
Edit also one more test boot into recovery and click in the advanced menu and see if mount usb works for you in recovery mode ??

FIX (try using a generic cable)
I actually solved it on my own! After borrowing a generic cable from a friend it booted up! The Samsung cable was just not doing its thing.

yeah im telling you those cables they provide are JUNK!!! i only use my samsung to charge because they do that well but data they are str8 CRAP!! glad you got it up and going

OP
Hope OP will have the same luck as me...pray to the Android gods...

Lol:thumbup:
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Cannot connect to pc with windows 8.1

Hey guys i recently got a new pc with windows 8.1 and it doesnt recognize my gnex. whenever i connect it (i tried various combinations of mtp,ptp and usb debugging on and off) it says usb device has malfunctioned. same thing happens in bootloader mode. if i go to device manager i cannot see it under either portable devices or adb interface (the option is not present) i just see a yellow exclamation mark under "usb controllers> unknown usb device(port reset failed)". I have also tried all usb ports both usb 2.0 and 3.0.
anyone have the same problem? the phone works perfectly with the same cable in my other laptop with win7

I solved the issue. It seems that my USB cable was the problem. I changed it and it installed fine. I didn't think of it at first as the same cable works perfectly fine with win 7.
Sent from my Galaxy Nexus using Tapatalk

I always have the problem that I can connect to my phone, but sometimes when I try to open a folder, it keeps loading and won't open the folder. Don't think that's an USB problem too, but I'll try...

[Q] PC doesn't recognise my phone

Hi guys
Im proper stumped for ideas now ive been trying to connect my phone to my pc all morning but to no avail.
Here's what i tried so far:
Different usb leads,
putting the usb leads in different ports,
Uninstalled HTC Drivers and then re installed them
Enabled debugging options and USB debugging
All of these and still nothing
When i connect the phone to the pc the phone starts charging and the PHONE makes the normal beeping noise when its charging but nothing on the pc, when i connect something else to the PC the pc does a little beep to tell its recognized the usb device connected but with the htc one m8 it doesnt do anything, Ive been into device manager and nothing there in regards to the phone.
So im out of ideas so came here for help.
Thanks in advance

brookey12 said:
Hi guys
Im proper stumped for ideas now ive been trying to connect my phone to my pc all morning but to no avail.
Here's what i tried so far:
Different usb leads,
putting the usb leads in different ports,
Uninstalled HTC Drivers and then re installed them
Enabled debugging options and USB debugging
All of these and still nothing
When i connect the phone to the pc the phone starts charging and the PHONE makes the normal beeping noise when its charging but nothing on the pc, when i connect something else to the PC the pc does a little beep to tell its recognized the usb device connected but with the htc one m8 it doesnt do anything, Ive been into device manager and nothing there in regards to the phone.
So im out of ideas so came here for help.
Thanks in advance
Click to expand...
Click to collapse
Have you tryed with htc sync manager installed?

BernardoMorais said:
Have you tryed with htc sync manager installed?
Click to expand...
Click to collapse
Yes forgot to add that as well, tried it already still nothing

Uninstall all HTC Drives and HTC Sync.
Plug the phone to USB, and see if the PC responds. Does it try to automatically install HTC Sync? If so, don't allow it.
Does the PC recognize the phone at all in Device Manager (with all HTC software uninstalled)? If so, select the option to select drivers manually then pick generic Android MTP device (or something to that effect).

Have you rebooted the pc... Then plug in the phone?
And did it work on that pc before?

redpoint73 said:
Uninstall all HTC Drives and HTC Sync.
Plug the phone to USB, and see if the PC responds. Does it try to automatically install HTC Sync? If so, don't allow it.
Does the PC recognize the phone at all in Device Manager (with all HTC software uninstalled)? If so, select the option to select drivers manually then pick generic Android MTP device (or something to that effect).
Click to expand...
Click to collapse
When i plug the phone to the usb the pc doesnt respond as in recognize it, the phone does as it starts charging but not the pc, uninstalled all htc drivers and htc sync but still nothing, tried rebooting pc after uninstalling and still doesnt recognise me even plugging it in or in the device manager

brookey12 said:
When i plug the phone to the usb the pc doesnt respond as in recognize it, the phone does as it starts charging but not the pc, uninstalled all htc drivers and htc sync but still nothing, tried rebooting pc after uninstalling and still doesnt recognise me even plugging it in or in the device manager
Click to expand...
Click to collapse
Not a good sign that your PC doesn't recognize at all. Its possible the phone's USB port is damaged, so it will charge but not connect to sync to data.
Can you try a different computer?

ill try and update u

Phone not recognized by computer

Hey so i have been having a big problem recently. my htc one m8 32 gb verizon version doesnt get recognized by my computer. ive tried different computers, ports, and cables. i even got a new charging port and installed it but nothing. when i plug my phone into my pc, nothing pops up. the phone only charges but no option to transfer files. htc sync says no phone connected. Also have usb debugging enabled but nothing. running on 6.0 marshmallow and any help would be nice. Thanks!

If you look at your notifications, there will be one you can't clear saying USB Charging this device. Click on the notification and change it to File Transfer.

Couple comments:
1) Try the genuine HTC cable that came with the phone. I've noticed that some 3rd party cables will only charge, and not connect by USB/MTP. I assume the pin layout on those particular cables is not exactly the same as what HTC uses.
I know you probably already tried this (HTC cable) but this may at least narrow down the variables.
2) Assuming a Windows PC, go to device manager, find the phone (hopefully, its listed) then select the option to manually select a driver. Then pick the generic driver for "Android MTP device" (or something like that, forget the exact name). If often have to do this to get my home PC to "see" my M8 by USB. Although my work laptop doesn't have this issue. Your results will vary depending on your exact PC configuration, it can be very confusing and frustrating!

m8 problem
First sorry for bad English.
My M8 is not recognized by my computer. I've tried extra ports, cables, drivers .. Windows 7 64 bit is computer, android 6 is on the phone. Only the phone detects it is connected to a computer and offers the options, mtp, ptp, charging ...
What can I do?

[email protected] said:
My M8 is not recognized by my computer. I've tried extra ports, cables, drivers .. Windows 7 64 bit is computer, android 6 is on the phone. Only the phone detects it is connected to a computer and offers the options, mtp, ptp, charging ...
What can I do?
Click to expand...
Click to collapse
I don't see what the problem is. The PC recognizes the phone. Are you trying to access a function such as fastboot or adb, that is not working? You never say in your post what the problem is.