I've got the latest version of CleanROM installed on my Nexus 7 2013. Originally I had tried to flash the latest factory image (4.4.2) via USB/TWRP, while on JellyBean, after wiping and reformatting everything via TWRP. It wouldn't work, so I eventually tried flashing the latest version of CleanROM (based off of 4.4.2) and that did work. So, everything is fine on my device, but I'm wondering how to flash Google's official 4.4.2 image now. Was it because of the bootloader I had prior to trying to flash the official image? Was CleanROM able to successfully install the bootloader because it doesn't require that you be unlocked/unrooted?
P.S. Figured it out on my own...
Related
hi guys new to the galaxy phone and i have been looking into flashing a rom. i have done all the ground work root and custom recovery but now im trying to flash a rom and i get errors. i looked it up to a point where everything i do want to flash requires a 4.4 or 4.3 update and i am stuck in 4.1 is there any solution to this like start from an older rom and work my way up to a current rom. would that work or odin the phone to a current update if possible to find the update. what options do i have ?
not sure if this is the correct thread
Well I would just flash via Odin up to 4.3 because most Roms require the 4.3 boot loader so yea
Sent from my ATT Samsung Galaxy SIII using TapaTalk
I recommend you not update to the 4.3 bootloader as the 4.3 bootloader can cause problems when trying to flash back to stock. Once you're on a 4.3 bootloader, you cannot downgrade to a lower version. Most ROMs seem to work fine with a 4.1.1 or 4.1.2 bootloader.
If you have the att s3 (i747) and not the Bell/Telus/Rogers s3 (i747m), you cannot use Odin to flash a stock 4.3 ROM as it does not exist. You would need to flash a version of 4.3 that has been custom compiled for flashing via Odin.
I would download the latest version of Philz Touch and flash the tar version via Odin. Copy a custom ROM to your SD card, boot to recovery, wipe cache, Dalvik, data, and flash the ROM.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte
Hello, I recently just updated my Rogers SGH-i317M to 4.3, which then downloaded a system update which put it at 4.4. I was running Jedi X20, which is based on 4.1.2, when I first tried updating, I flashed the "4.3param_tz" file in odin, and was left with an error screen saying I need to recover using Kies, so I downloaded the official release, flashed via odin, and thats how I got to where I am now. I want to try the "Ditto Note 3" rom, "Sky Note Air 4.3", "Mean Bean" and "Beanstalk". My main question is, can I just start flashing these roms like I was before on 4.1.2, or do I need to use the specific kernel listed on their page? Before you needed a specific kernel to run a touchwiz rom or an aosp rom, so is it still the same? Or can I use my stock 4.4 kernel and try both aosp and tw roms now? If so could you point out the kernels I would need? And educate me on anything else I should know about before flashing 4.3 and 4.4 roms, (I'm not worried about warranty), this would be greatly appreciated. Thanks for your time in reading this and helping me out, much appreciated!!
Regardless of where u are, I'd Odin to Rogers stock KK 4.4.2. Then Odin Twrp recovery, boot into twrp recovery and flash SU v.1.99. Finally choose your rom and flash away. This way you are on the lastest KK 4.4.2 Bootloader and KK Modem/Baseband.
just_visiting said:
Regardless of where u are, I'd Odin to Rogers stock KK 4.4.2. Then Odin Twrp recovery, boot into twrp recovery and flash SU v.1.99. Finally choose your rom and flash away. This way you are on the lastest KK 4.4.2 Bootloader and KK Modem/Baseband.
Click to expand...
Click to collapse
I did all that except flash SU 1.99, so I tried flashing SKynote Air and it didnt work, upon restarting my phone it said no os is available. So I tried restoring from the backup I made of the official 4.4.2 Samsung rom in twrp, didn't work. Tried Odin, didn't work. Then I tried flashing the Skynote rom again and it worked. So I'm afraid of flashing any other roms now.
I rooted my dad's phone a while back ago so he can use tethering in case of emergencies etc. He recently got a smart watch and I wanted to updated it so that he can use it. But it has not been touched since that day. I essentially want rooted stock rom, I'm unaware of where to find that the closest I can find is StockMod kitkat. Which seems to not work on ATT phones? I just want to make sure that I don't brick his only phone on christmas. So is there something I should be aware of?
His model is SGH-i747
Baseband
i747UCDLK3
Build number
jro03
So how do I go about upgrading it? Can I just flash TWRP and flash any rom using TWRP?
I found this, so I should install new TWRP, then flash a specified kernel then flash rom? would this be safe route?
Some of the latest ROMs require a 4.4.2 bootloader and modem.
The simplest and safest way to get the latest bootloader may be to flash back to unrooted stock 4.1.1 and run OTA updates until the phone is running the latest KK ROM. You can then flash TWRP or CWM and a custom ROM.
audit13 said:
Some of the latest ROMs require a 4.4.2 bootloader and modem.
The simplest and safest way to get the latest bootloader may be to flash back to unrooted stock 4.1.1 and run OTA updates until the phone is running the latest KK ROM. You can then flash TWRP or CWM and a custom ROM.
Click to expand...
Click to collapse
Would this require flashing with ODIN? I just want it so that it works with root is not required anymore.
Yes, you would flash the 4.1.1 stock ATT ROM via Odin. I prefer Odin 3.07.
You cannot install OTA updates with root.
You can try flashing just the bootloader and modem but I prefer the long slow route of OTA updates.
I rather do it this way, manually so my dad can enjoy it today. I was wondering how can I update it's TWRP? it's at 2.3 but the TWRP manager keeps crashing when I update it.
I highly recommend the latest d2lte version of Philz Touch for recovery.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
Ok I ****ed up, flash that kernel and did whatever and bam ****ed up. Not working... ****, I still ahve download mode and Recovery but it will not boot into the OS. I get a flash of samsung and then nothing else happends...****
I decided to flash stock DLK3 in odin. Then let the updates take it course (my dad doesn't need root) Where Can I find the file?
The stock ATT firmware is on sammobile.com.
If you want root, OTA to the latest 4.4.2, install Philz, flash supersu via recovery.
hi guys - so i tried to install the revolution rom on my recently unlocked m9 and it'd only boot to the bootloader or download.
i found some threads back from 2012 that said twrp wouldn't install the rev rom, but suspect it's out of date - it seemed to work fine.
is there some magic here? i tried to flash my firmware to the version matching the rom (3.35.401.12) and got a code 10 failure in adb. my current firmware is 3.10.605.7. doesn't flashing the rom update the firmware too? or do i need to successfully flash the rom prior?
should i use a different recovery? twrp launched the rev aroma installer and all seemed to go perfectly smoothly... no problems came up until reboot brought me right back to bootloader.
the aroma install says it might boot loop a couple times, but i booted to bootloader 5+ times before giving up and going back to a deodexed stock vzw rom.
any help is greatly appreciated - i'm hoping to get up to marshmallow before calling it good enough and moving on.
Flashing the rom doesnt update the firmware. S-on makes sure of that.
You must be on the base firmware for the rom to take. You need the vzw marshmallow ota update before you can flash a marshmallow based rom.
Sent from my HTC One M9 using Tapatalk
hey can anyone help me? i've recently reverted my note 2 back to stock via odin and everything seemed fine. When the phone booted and i went through the setup process it always hangs. No matter what i do it always hangs. I've tried reflashing it and rebooting it over and over again but it always hangs. anyone know why this keeps happening?
Are you flashing the latest stock ROM? You're performing a factory reset before booting the ROM for the first time?
audit13 said:
Are you flashing the latest stock ROM? You're performing a factory reset before booting the ROM for the first time?
Click to expand...
Click to collapse
Yup latest stock rom, and before i flashed via odin i deleted my previous rom via twrp and formatted internal storage so its 100% clean
I've downgraded a Note 2 sgh-i317m to 4.1.1 from 4.4.2 by flashing a stock 4.1.1 ROM from sammobile.com in order to network unlock the phone. Flashing the stock 4.1.1 ROM tripped knox and could be installed via Odin because the 4.1.1 ROM from sammobile.com did not contain a 4.1.1 bootloader so I wound up with a stock 4.1.1 ROM on a 4.4.2 bootloader. After unlocking, I flashed the stock 4.4.2 ROM again and the the phone worked as it should.
I'm not sure which phone you have and I'm not sure downgrading and upgrading will work in your case but it's something you may want to look into.
audit13 said:
I've downgraded a Note 2 sgh-i317m to 4.1.1 from 4.4.2 by flashing a stock 4.1.1 ROM from sammobile.com in order to network unlock the phone. Flashing the stock 4.1.1 ROM tripped knox and could be installed via Odin because the 4.1.1 ROM from sammobile.com did not contain a 4.1.1 bootloader so I wound up with a stock 4.1.1 ROM on a 4.4.2 bootloader. After unlocking, I flashed the stock 4.4.2 ROM again and the the phone worked as it should.
I'm not sure which phone you have and I'm not sure downgrading and upgrading will work in your case but it's something you may want to look into.
Click to expand...
Click to collapse
I've managed to get the phone working (N7100) and it seems to run fine on Nougat. I did some testing and indeed it would always crash on setup with kitkat roms. I wonder why this is the case....
It is strange that kit kat causes a problem.
Have you tried using a different version of twrp to wipe the system before flashing with Odin? Can't think of anything else that may solve the problem.