Develop Bugs

[Guide] [Regain 100% Warranty From CWM] Grand i9082 (Without Odin)

Hi All,
I just wanted to come back to complete 100% warranty from my current rom using CWM flashable zip file. Even after reading so many forums, I couldn't find an all-in-one thread which contains a guide to regain 100% warranty including reset the custom ROM flash counter to 0 and stock recovery. I hope you find this handy.
We have so many threads to reset the custom ROM flash counter to 0, but it is also very much necessary to have the Stock Samsung Recovery to claim your warranty. Although you still can enjoy the full root access but if you want to unroot then you can simply use Superuser app settings menu.
Because we need to claim warranty when there is some major issue in the handset or our system has got corrupted and we cant reboot anymore. Then we can go to CWM and flash any rom but to go to service center we need to remove CWM.
Table of Contents:
A). Requirements
B). Procedure
C). Tests
D). Credits
A). Requirements:
- Samsung Galaxy Grand Duos (i9082) [rooted]
- Root Access
- CWM Recovery
B). Procedure:
Step 1: Download and install TriangleAway v3.01 from http://forum.xda-developers.com/showthread.php?t=1494114.
Step 2: Follow the steps given in the thread to reset the custom ROM flash counter to 0.
Step 3: Now go to CWM Recovery and flash Stock Recovery.zip file (given in the attachment) to gain the STOCK SAMSUNG RECOVERY.
CONGRATULATIONS NOW YOU HAVE GAINED 100% WARRANTY. Stock Recovery, Stock Firmware and Unrooted.
C). Tests
This method is tested and proved successful on the Stock Based Roms.
D).Credits:
- Chainfire for Triangle Away.
- Me: For compiling this guide (Just Kidding )
Don’t Forget to hit the Thanks Button as this is my first post on xda.
Regards
Ravinder Singh
If You Like It Then,
<<<<!!! Don't Say Thanks Just Press It !!!>>>

Hey what about device status? after doing this method it will be custom or official? nd can we get update from software update?

another very important item for warranty is your original CSC. Example if you flash Russian 4.2.2 firmware your CSC becomes SER. You have to be sure that this is also changed when you go back to stock firmware OF YOUR REGION example India will be INU. Connect your grand to kies and check for the correct CSC before going to service to claim warranty,
I would also like to add that before flashing anything on your device to check and note your original CSC. Believe me this is most of the time checked by the service staff....
How to unroot including system status:
HERE

muntinlupa said:
another very important item for warranty is your original CSC. Example if you flash Russian 4.2.2 firmware your CSC becomes SER. You have to be sure that this is also changed when you go back to stock firmware OF YOUR REGION example India will be INU. Connect your grand to kies and check for the correct CSC before going to service to claim warranty,
I would also like to add that before flashing anything on your device to check and note your original CSC. Believe me this is most of the time checked by the service staff....
How to unroot including system status:
HERE
Click to expand...
Click to collapse
thanks for the advice dear, i will include CSC changer apk link also...
Now feel happy dear all.
This is a thread in which i will include everything to make your Grand as it was when you purchased it.

tufail.budoo said:
Hey what about device status? after doing this method it will be custom or official? nd can we get update from software update?
Click to expand...
Click to collapse
Hi bro,
there are options for both in Triangle away... for Odin mode status and for settings menu... if you have any issue or you are not getting the official status then PM me ....

I read and reread your instructions but there is nothing saying how to get back to stock unrooted rom without using odin as mentioned on the title.Please clarify.

Easy way....
----------------------------------------------------
1.Reset bin counter with triangle away
2.swichoff ur device
3.boot into Odin mode
4.flash stock rom of ur region with Odin
5.boot into stock recovery
6.wipe data/factory reset...wipe cache...wipe dalvik cache...
7.reboot...
......If u want to change CSC....
click here
Sent from my GT-I9082 using Tapatalk 2

Right. That procedure is same as youtube cursed4eva method.
I believe there is no way to get back to stock without using odin more so if on 4.2.2

can I root the phone & then flash this stock recovery again to receive system updates & still keep root privileges?

Works with I9082L version ? Thanks !

Nice One :fingers-crossed:

does this method works with 4.2.2?

I believe even Xposed works...

bro.when i install stock recovery it shows installation aborted.what to do now
reply asap.!!!

It doesn't works with 4.2.2
Gesendet von meinem GT-I9082 mit Tapatalk 2
Edit: This works with 4.2.2 http://forum.xda-developers.com/showthread.php?t=2556559

flashing error
can not flash it on my i9082 , rooted with cwm recovery
every time it says installation aborted
so please fix it

[Q] Replacing system/fonts GS3 (AT&T)

Ok so I rooted using a safe root method, I have no clockwork mod installed. I only have the stock recovery and the phones boots into that and also boots into download mode. What I did was used a bad app off the market and it set a custom font (with root permissions) as soon as I set it the phone went black and restarted, it booted fine until it got to the boot loader. Now its stuck in a boot loop of the AT&T logo. I have a fellow on Youtube trying to help me out but he is having issues finding a stock rom. I have also used ADB (android debug bridge) and i was gonna "pull system/font" and then push it back onto the phone with the factory default fonts. I cant seem to get it to work. I am out of ideas of what to do, I am new to this so I have never even flashed a rom, im needing someones help.
I did some reading and from what I can tell the custom font replaced my "default fonts" located in (system/fonts) is there a way to get to this file with the phone not booting up? If so how? I have the default fonts, all I need to do is just set the fonts back to default.
The guy from Youtube told me I can flash the "stock firmware" to the phone and it will flash a whole new system making "system/fonts" replaced and back to default. The issue is that we cannot find the stock firmware.
Does anyone know any kind of solution for me? Any way at all to get to the system/apps? Or maybe the stock firmware download? My phones info is below.
The download he did find for me was named "AT&T_I747UCUEMJB.zip"
When I extracted it I should have had .tar.mg5 (I might be wrong on the mg5 part) but I ended up with 3 things. I ended up with system, META-INF and boot.img When looking at the files it seems like everything that needs to be flashed over? It's just not in the wrong format maybe?
Model: SGH-I747
Version: Android 4.3
Root access: Yes (last I knew it was rooted, but I did a factory reset from recovery.)
Clockwork Mod: No (I can flash it though since I got download mode?)
Anyone can help me please? I have been racking my brain for almost 2 weeks now and its driving me insane! lol

Did you upgrade to AT&T stock 4.3 rom using an OTA update?

audit13 said:
Did you upgrade to AT&T stock 4.3 rom using an OTA update?
Click to expand...
Click to collapse
I upgraded using OTA directly from the AT&T servers (settings > about phone > check for software upgrade)

Since you have a stock 4.3 ROM on your phone, you cannot simply re-flash the 4..3 ROM because the 4.3 ROM update included a bootloader that installs Knox and prevents loading any ROM older than 4.3.
Rooting the phone while on 4.3 will trip the Knox counter and void any remaining warranty.
You maybe better off flashing Philz Touch Recovery in Odin and install a custom ROM.

Gotnitro said:
I upgraded using OTA directly from the AT&T servers (settings > about phone > check for software upgrade)
Click to expand...
Click to collapse
I keep downloading and downloading roms and I get the same results, I get folders and a boot.img.
The files I get are:
system
META-INF
boot.img
When opening the system folder I get:
xbin
wallpaper
wakeupdata
vsc
vold
voicebargeindata
vendor
usr
tts
T9DB
media
lib
hdic
framework
fonts
etc
esc
cameradata
bin
app
some others like build.prop, kern_sec_info and more
The META-INF folder contains:
updater-script
update-binary
Then there is a boot.img
What am I doing wrong? I think that I am extracting these files wrong maybe? When downloading it comes in as a .zip file. I use WinRAR to extract .zip files.
This is my exact steps:
Download with Google Chrome
Drag/drop the downloaded .zip from my browser to the desktop
Right Click, Create New Folder, name it "AndroidROM"
Drag/Drop the .zip file into "AndroidROM"
Open the "AndroidROM" folder
Right click on the .zip file
Extract here...
WinRAR extracts the files and I get system, META-INF and boot.img I see nothing of a .tar file or .mg5 (I forget that one always)
What am I doing wrong?
This would be the download I used, I also used others but this is the one I need.
http:// www. androidfilehost .com/?fid =23196940996968654
(Sorry had to separate the link because XDA wont let me post links yet)

Are you trying to flash a custom rom in CWM or TWRP or a stock ROM using Odin?

audit13 said:
Since you have a stock 4.3 ROM on your phone, you cannot simply re-flash the 4..3 ROM because the 4.3 ROM update included a bootloader that installs Knox and prevents loading any ROM older than 4.3.
Rooting the phone while on 4.3 will trip the Knox counter and void any remaining warranty.
You maybe better off flashing Philz Touch Recovery in Odin and install a custom ROM.
Click to expand...
Click to collapse
You posted that reply as I was typing up the other one sorry about that lol ok so my KNOX is not tripped because I used a method that does not trip it. I will put the link of how I did that below and it does worked and its still 0x0 I did it myself and this is not what caused me to be bootlooping it was the font.
Ok about your idea of the Philz Touch Recovery and installing a custom ROM, can you explain this more? Like in details of if it works on my variant and my version (4.3 with knox)
As I said this will be my first time doing any of this, im learning as I do this right now so I am very confused at this point and all I want is my phone back. I honestly dont care what OS I get I just want my GS3 back. This was a big mistake trying to make my phone better with root and I just want it back to normal or at least running lol

audit13 said:
Are you trying to flash a custom rom in CWM or TWRP or a stock ROM using Odin?
Click to expand...
Click to collapse
I don't care what I get, I just want my phone back running and not to see that AT&T logo which is the bootloader lol I think that he wants me to do a stock ROM using Odin.
The guy on Youtube wants me to flash a stock firmware sgh-i747 rom, just the rom no custom at all to it, I think what he is trying to do is get the exact same rom that the OTA update had that way knox and the bootloader isn't gonna affect things? Is that possible? He is not having luck finding the download.
Oh sorry forgot the link in the last post
Here is the youtube video for the root without tripping knox:
http:// www. youtube.com /watch?v=GiZ7D2zjJdA

You can't flash a stock AT&T 4.3 rom via Odin because there is no such thing.
Did you boot into download to make sure your Knox counter is still 0x0?

audit13 said:
You can't flash a stock AT&T 4.3 rom via Odin because there is no such thing.
Click to expand...
Click to collapse
Interesting, I really dont know... put yourself in a unknown room, blind fold yourself and turn off the lights and try to get out lol thats how I feel right now, I honestly have no clue.
What do you recommend me doing? Is there is possible way for me to replace the system/fonts, I used ADB (Android Debug Bridge) but it only shows the phone as "sideload" when plugging my HTC Inspire in it shows the serial number I think? But also that phone is fully on where the GS3 is in stock recovery mode.

All hope is not lost as your phone boots. Remain calm and I'll do what I can to help you.
First of all, boot into download mode: hold volume down, home button, press and hold power button. You will receive a warning screen, press volume up to enter download mode. What does the screen say? I'm asking you to do this to ensure that your knox counter has not been tripped.

audit13 said:
All hope is not lost as your phone boots. Remain calm and I'll do what I can to help you.
First of all, boot into download mode: hold volume down, home button, press and hold power button. You will receive a warning screen, press volume up to enter download mode. What does the screen say? I'm asking you to do this to ensure that your knox counter has not been tripped.
Click to expand...
Click to collapse
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMN: ENABLE
Warranty Bit: 0
BOOTLOADER RP SWREV: 2
Only thing that changed when rooting was the "system status"

Gotnitro said:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
QUALCOMN: ENABLE
Warranty Bit: 0
BOOTLOADER RP SWREV: 2
Click to expand...
Click to collapse
I noticed that your system status is custom rather than official.

Yes that was one things that I think was noted in that video that it changes your system status. Whats that mean? Is this good or bad?
Is my phone really fixable do you think? Or being that this Knox and stuff it isn't?

Gotnitro said:
Yes that was one things that I think was noted in that video that it changes your system status. Whats that mean? Is this good or bad?
Is my phone really fixable do you think? Or being that this Knox and stuff it isn't?
Click to expand...
Click to collapse
I think it just means that your phone is rooted. Do you have any warranty left on your phone?

audit13 said:
I think it just means that your phone is rooted. Do you have any warranty left on your phone?
Click to expand...
Click to collapse
As far as I know of no, the phone is going on 2 years old this July. I plan on getting the Galaxy S5 but that's still a ways away and I really like this phone so I want to get it fixed.

Can you get into recovery mode on your phone? If you can, try wiping cache and doing a factory reset.

audit13 said:
Can you get into recovery mode on your phone? If you can, try wiping cache and doing a factory reset.
Click to expand...
Click to collapse
Yes I can get into recovery mode (Vol up + home + power) which puts it into stock recovery mode.
I have already tried clearing the cache and a factory reset. What happen was the app I used took the default font and replaced it with a custom font in the system/fonts of the phone. So even with a factory reset its gonna revert back to the default font which is still gonna be the custom font the app did. So I need to get rid of all the fonts I have and replace all the fonts in /system/fonts which I think is what is done with the custom rom?

If you want to flash a custom ROM and your phone has no warranty left, you could try flashing a custom recovery in Odin and flash a custom ROM. I don't think root is required since you're just installing a custom recovery.
I use Philz Touch Recovery which is based on CWM. Once you flash the a custom recovery, you can just boot into recovery mode and flash a custom rom.

audit13 said:
If you want to flash a custom ROM and your phone has no warranty left, you could try flashing a custom recovery in Odin and flash a custom ROM.
I use Philz Touch Recovery which is based on CWM. Once you flash the a custom recovery, you can just boot into recovery mode and flash a custom rom.
Click to expand...
Click to collapse
Of course there is always risks when rooting/flashing roms but what would you say my chances are of getting it to work being that I have knox on my phone and a bootloader?

[Q] Installl a custom ROM while Rooted STOCK

I have rooted my S4 Mini so I could move apps into the SD Card and remove bloatware.
Samsung and my Operator have just put so much bloatware that is impossible to remove them without flashing a Custom ROM.
Now I am still rooted, and I still have the stock recovery and ROM. My questions are:
1) Which ROM is more stable/aosp? Cyanogenmod (10.2 ?) or SlimKaT ROM?
2) Can I install a custom ROM withthe stock Recovery? Is it recommended?
3) Any guides available that will help me do it, (given that I am ALREADY rooted and with stock rom?)
Thanks

alrosh7 said:
I have rooted my S4 Mini so I could move apps into the SD Card and remove bloatware.
Samsung and my Operator have just put so much bloatware that is impossible to remove them without flashing a Custom ROM.
Now I am still rooted, and I still have the stock recovery and ROM. My questions are:
1) Which ROM is more stable/aosp? Cyanogenmod (10.2 ?) or SlimKaT ROM?
2) Can I install a custom ROM withthe stock Recovery? Is it recommended?
3) Any guides available that will help me do it, (given that I am ALREADY rooted and with stock rom?)
Thanks
Click to expand...
Click to collapse
1. This a a very subjective matter that get asked over and over again. You got to have to try it for yourself. Slimrom is by far, the only ROM with the least pre-installed app.
2) You can't install a custom ROM with stock recovery.
3) Since you didn't mention which method you use to ROOT (as few rooting method will install CWM for you), the first thing you need to do if to check if you have custom recovery. Some root method such as SafeRoot don't allow this operation (again you need to clarify). The easiest way is to install CWM is via ROM Manager from the Play store: https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager which the app will install CWM for you. Note that this will trigger Knox if you phone is protected by it.

alrosh7 said:
I have rooted my S4 Mini so I could move apps into the SD Card and remove bloatware.
Samsung and my Operator have just put so much bloatware that is impossible to remove them without flashing a Custom ROM.
Now I am still rooted, and I still have the stock recovery and ROM. My questions are:
1) Which ROM is more stable/aosp? Cyanogenmod (10.2 ?) or SlimKaT ROM?
2) Can I install a custom ROM withthe stock Recovery? Is it recommended?
3) Any guides available that will help me do it, (given that I am ALREADY rooted and with stock rom?)
Thanks
Click to expand...
Click to collapse
first of all please specify ur model .. we have here 3 types .. lte model i9195 , dual sim model which i have i9192 and the single sim i9190
..thing is if you have an i9192 we dont have any aosp/cm/aokp for them as these roms require single sim and radio drivers doesnt get ported easily
... secondly u MUST CHECK if u have a knox bootloader or not ... if u dont know knox .. its just a flag in download mode "0x0" if u attempt to flash any bootloader in the phone throught odin even .. it turns "0x1" and IT CANNOT BE 0X0 AGAIN !! ..this voids the warrenty if u have of if its a job's phone u will face problems ...if u dont have "knox void warrenty" sentence in the download mode u are lucky and BE CAREFUL of flashing bootloaders .. in this case avoid flashing any new stock firmwares because they have knox .. remove knox from a guide here and then flash :highfive: ... thirdly as far as i know cm/aosp based roms here are stable but as usual they are not that good in camera and they are only avilable for i9190/i9195 ... u cant install a custom rom from stock recovery ..stock recovey flashes ONLY signed samsung zips "upgrade packages"
... 4th search by yourself xda is full of guides and here in s4 mini forum we have almost all needed guides :highfive: ... sorry for writing alot but when u asked about installing a custom rom with stock recovery is a "newbie" question so i thought to tell u everything

Thank for the helps guys.
First of all ROM Manager does not support my phone . I says that it can not find a suitable Recovery to install.
My model is i9195.
My Knox warannty is not valid anymore (It says warranty bit not found).

Also, I found this guide http://www.s4miniarchive.com/2013/08/how-to-root-samsung-galaxy-s4-mini-gt.html
but I do not want to install the custom kernel. Will it be ok to skip the first step and just flash the Recovery?

alrosh7 said:
Thank for the helps guys.
First of all ROM Manager does not support my phone . I says that it can not find a suitable Recovery to install.
My model is i9195.
My Knox warannty is not valid anymore (It says warranty bit not found).
Click to expand...
Click to collapse
alrosh7 said:
Also, I found this guide http://www.s4miniarchive.com/2013/08/how-to-root-samsung-galaxy-s4-mini-gt.html
but I do not want to install the custom kernel. Will it be ok to skip the first step and just flash the Recovery?
Click to expand...
Click to collapse
Hmm, odd. I thought I did my CWM by ROM Manager. Any case just do this: http://forum.xda-developers.com/showthread.php?t=2364980
Do step 2-6 and you will have CWM.
PS. I'm not sure why you worry about the custom kernel, if you going to use custom ROM, it will have a custom kernel.

TNCS said:
Hmm, odd. I thought I did my CWM by ROM Manager. Any case just do this: http://forum.xda-developers.com/showthread.php?t=2364980
Do step 2-6 and you will have CWM.
PS. I'm not sure why you worry about the custom kernel, if you going to use custom ROM, it will have a custom kernel.
Click to expand...
Click to collapse
The reason is that I want to avoid using a custom kernel is because I read that some of them are 'insecure'.
Anyway, I will give it a try (steps 2-6) and see if it works.
Thanks

whoa whoa easy .. just flash philz recovery tar file through odin hereeee your device name is "serranoltexx" the i9195 ..rom manger isnt supported for us ithink ..enjoy

rrgrrg said:
whoa whoa easy .. just flash philz recovery tar file through odin hereeee your device name is "serranoltexx" the i9195 ..rom manger isnt supported for us ithink ..enjoy
Click to expand...
Click to collapse
"whoa whoa easy" ? What do you mean ? Which methods is more safe?

alrosh7 said:
"whoa whoa easy" ? What do you mean ? Which methods is more safe?
Click to expand...
Click to collapse
They both are, it up to your preference on which custom recovery you going for. The steps will be the same.

alrosh7 said:
"whoa whoa easy" ? What do you mean ? Which methods is more safe?
Click to expand...
Click to collapse
there is no more safe u r already passed the danger zone by rooting :silly: .. back on topic .. they are the same but philz is the "best" IMO so i reccomend it for ya

[Q] need help urgently please :'(

i don't know how i did that stupid thing ! i'm using note 2 gt-n7100 ( rooted ) i tried to install a new rom that doesn't built for my phone with " mobile odin v 4.2 pro unfortunately it flashed the sumsung star dous stock rom on my mobile but it doesn't boot .. i entered the philz touch recovery menu and select clean to install a new rom and restore my old rom and the problems started to appear !
the first thing is when i press the power button to lock my note 2 and try to open it again i find no response at all and the only way is to remove the battery and re turn it on again and try not to press the lock button as if i do so my mobile gives me no response and the screen doesn't turn on !
the second matter i noticed that when the start up i found the bluetooth icon trying to turn to green like i'm turning the bluetooth on but a few seconds it didn't turn on even i try to turn it ! the bluetooth doesn't work at all !
the third thing when i recieve a call that turn on the proximty sensor automatically if i touch the sensor the screen go black but i lose the control and give me no response at all and i have to remove the battery and turn it on again !
the things i noticed when i flashed the galaxy star rom with mobile odin that it has partion called param and the note to doesn't have it with its rom but have partion called modem which i didn't found in the galaxy star rom !
i need help please how i delete things that caused that conflict .. i tried to reflash the stock rom of my note with odin on my lap top but nothig changed and it hanging and the screen freezes with no control at all and that happened when i try to use a custom rom and flash it through the recovery .. please help urgently
sorry for my bad english

Two options I see:
1. Try to restore your device using Kies3
2. Flash newest firmware (get it from sammobile) for your region using PC-Odin.

Putting "need help urgently please :'(" does not help you in any way, in fact it makes it more likely that people will simply ignore the topic. Topic titles need to be descriptive, not generic non-descriptive.
Your problem is that like many newbies you cant be bothered to do research, read and learn before messing around with your device.
You should boot into download mode and flash a stock rom. Preferably a older one that doesn't have knox. Then flash a stock rom(without knox) in recovery mode. All the info you need is here on forum.

Androidwizzard said:
Two options I see:
1. Try to restore your device using Kies3
2. Flash newest firmware (get it from sammobile) for your region using PC-Odin.
Click to expand...
Click to collapse
i forgot to tell that one of the things changed that my mobile lost the usb support in the normal mode as there is no change when i connect it to my pc except it charges only but it works in the download mode and when i reflash the stock rom v 4.3 the screen freezes after a few seconds of turning it on and i have to remove the battery .. do you think that flashing the 4.4.2 sthock rom will make a change ? as the solution of kies isn't possible due to the lack of usb support !
is there a way to format the sectors that the pation " param " which flashed by the sumsung star dous stock rom is in it and make that conflict to delete that ??

What was your last stock rom on your device before messing up?
I do absolutely not agree with those horror tales about knox, most people don't use and easily get rid of.
Do you remember your last bootloader? MK4 or above? Then don't take any risk by flashing 4.3 firmware and go straight ahead to 4.4.2.
It will be the safest way to get a working device again.

TheATHEiST said:
Putting "need help urgently please :'(" does not help you in any way, in fact it makes it more likely that people will simply ignore the topic. Topic titles need to be descriptive, not generic non-descriptive.
Your problem is that like many newbies you cant be bothered to do research, read and learn before messing around with your device.
You should boot into download mode and flash a stock rom. Preferably a older one that doesn't have knox. Then flash a stock rom(without knox) in recovery mode. All the info you need is here on forum.
Click to expand...
Click to collapse
i'm sorry for the way i show my problem as i'm a newbie already .. it that possible to downgrade my rom ? i will try install 4.1.2 rom then flasing the 4.4.2 one but when i flashed the 4.3 stock rom the screen freezes and nothing changed what do you think of that ? it there's a way to delete the " param " found in the sumsung galaxy star dous rom ? i think that made this conflict but try to explain to me why flashing an old rom then a new one without knox ? what will that do ?

Androidwizzard said:
What was your last stock rom on your device before messing up?
I do absolutely not agree with those horror tales about knox, most people don't use and easily get rid of.
Do you remember your last bootloader? MK4 or above? Then don't take any risk by flashing 4.3 firmware and go straight ahead to 4.4.2.
It will be the safest way to get a working device again.
Click to expand...
Click to collapse
i was using dn3 rom which has android version v 4.4.2 but i enter the recovery and restored the stock rom v 4.3 and it works with no problem and it was the last rom i use it when i flashed the star dous rom through the mobile odin in my mobile .. is there is a things i must do when i'm flashin the rom through the pc odin ? like check the repartion option or some thing else ?
my bootloader version is : n7100xxuena1 what that mean ?

omar youssef said:
i was using dn3 rom which has android version v 4.4.2 but i enter the recovery and restored the stock rom v 4.3 and it works with no problem and it was the last rom i use it when i flashed the star dous rom through the mobile odin in my mobile .. is there is a things i must do when i'm flashin the rom through the pc odin ? like check the repartion option or some thing else ?
my bootloader version is : n7100xxuena1 what that mean ?
Click to expand...
Click to collapse
So you can also try the NA1 firmware, but nothing beneath that. NA1 is a knox enabled BL, so whatever you flash successfully will have Knox in it.
DON'T TICK REPARTITION!

Androidwizzard said:
So you can also try the NA1 firmware, but nothing beneath that. NA1 is a knox enabled BL, so whatever you flash successfully will have Knox in it.
DON'T TICK REPARTITION!
Click to expand...
Click to collapse
what you mean of the NA1 firmware if you mean the 4.3 stock rom i flashed it with the pc odin and my mobile screen freezes as i told you and nothing changed .. give me obvious steps 1 2 3 to do it to solve this problem and if you can give me a suitable download links .. now you know all the issues with my mobile and thanks for your interst

omar youssef said:
what you mean of the NA1 firmware if you mean the 4.3 stock rom i flashed it with the pc odin and my mobile screen freezes as i told you and nothing changed .. give me obvious steps 1 2 3 to do it to solve this problem and if you can give me a suitable download links .. now you know all the issues with my mobile and thanks for your interst
Click to expand...
Click to collapse
1) Go to Sammobile
2) Find firmware for your region -> download
3) Find Odin 3.09 -> download and install
4) Start Odin 3.09
5) Plugin device -> see if Odin displays active com port
6) Go into download mode
7) Link firmware download in tab PDA/AP
8) Let Odin check md5
9) Press start button
10) Wait until display of com port in Odin turns green and says success.
All these steps could also be found with an easy Google search or in Youtube tutorials

Androidwizzard said:
1) Go to Sammobile
2) Find firmware for your region -> download
3) Find Odin 3.09 -> download and install
4) Start Odin 3.09
5) Plugin device -> see if Odin displays active com port
6) Go into download mode
7) Link firmware download in tab PDA/AP
8) Let Odin check md5
9) Press start button
10) Wait until display of com port in Odin turns green and says success.
All these steps could also be found with an easy Google search or in Youtube tutorials
Click to expand...
Click to collapse
Thanks for your work but I did all these steps but my mobile freezes and noying changed fir sorry .. I flashed the 4.4.2 kitkat stock rom which is the latest one !

omar youssef said:
Thanks for your work but I did all these steps but my mobile freezes and noying changed fir sorry .. I flashed the 4.4.2 kitkat stock rom which is the latest one !
Click to expand...
Click to collapse
OK, I see. Try a wipe from stock recovery, wipe all possible.
Another option: Kies!
I know, you said not recognized but you must get it to work. Uninstall all drivers from PC an re-install drivers until Kies can restore your device.
Very last option: Find a Samsung repair near to you.

Androidwizzard said:
OK, I see. Try a wipe from stock recovery, wipe all possible.
Another option: Kies!
I know, you said not recognized but you must get it to work. Uninstall all drivers from PC an re-install drivers until Kies can restore your device.
Very last option: Find a Samsung repair near to you.
Click to expand...
Click to collapse
Look I searched the internet find something I think it will be useful if we can use it successfully called n7100 rescue rom consists of 5 files in one zip file it is the fully original factory rom but unfortunately it's 4.1.2 jellybean so how can I flash this rom successfully ? Is it possible downgrade the bootloader first or what ?? Please help

omar youssef said:
Look I searched the internet find something I think it will be useful if we can use it successfully called n7100 rescue rom consists of 5 files in one zip file it is the fully original factory rom but unfortunately it's 4.1.2 jellybean so how can I flash this rom successfully ? Is it possible downgrade the bootloader first or what ?? Please help
Click to expand...
Click to collapse
As you mentioned you already have been on NA1 firmware and as it seems you have flashed latest 4.4.2 with "a kind of success" I find it hope- and useless to even try this rescue rom. Bootloader is the reason why you can't successfully flash. NO DOWNGRADE POSSIBLE.

Androidwizzard said:
As you mentioned you already have been on NA1 firmware and as it seems you have flashed latest 4.4.2 with "a kind of success" I find it hope- and useless to even try this rescue rom. Bootloader is the reason why you can't successfully flash. NO DOWNGRADE POSSIBLE.
Click to expand...
Click to collapse
Can you illustrate your words ? For kies it's unpossible to connect my mobile to any pc the drivers works perfectly for any similarphone the fault is in my mobile not the driver and for sumsung care it will be high cost as the warranty ended ! And I wipe every thing possible through the stock recovery but noyhing changed !

I am beginning to lose my patience cause you don't follow my advice or even don't consider that I am right.
Look into system on your PC if there is an unknown device.
Whenever hardware is connected to PC Windows starts to search for drivers.
It doesn't matter that other devices are recognized correctly.
Wipe all Samsung drivers and re-install. Even re-install Kies too.
Start Kies and try restoration, maybe it will fail, but try. AND with current drivers you are supposed to fail.
At last: Try to find a friend with knowledge who can help you at your home or his.

Kernel is not Seandroid Enforcing. My phone keeps restarting

I installed rot in my phone after that It keeps saying that Kernel is not Seandroid Enforcing and in the same time restarting. how can I solve it and keep it normal

Flash stock firmware found here:
http://forum.xda-developers.com/tmo...rmware-g928t-complete-untouched-boh6-t3198387
To root you need to flash new kernel and a costume recovery, found here:
http://forum.xda-developers.com/s6-...-to-rooting-flashing-custom-recovery-t3200324

nunis1903 said:
Flash stock firmware found here:
http://forum.xda-developers.com/tmo...rmware-g928t-complete-untouched-boh6-t3198387
To root you need to flash new kernel and a costume recovery, found here:
http://forum.xda-developers.com/s6-...-to-rooting-flashing-custom-recovery-t3200324
Click to expand...
Click to collapse
I rooted my phone yesterday from another kernel and It works but the WiFi does not work.
This is my phone's version G925FXXU3C0I9
Android version 5.1.1

ok dont flash this version since its for the
g920fi
g920skl
g920tw8
g925fi
g925skl
g925tw8
g928fci (You can flash this on Indian firmware as well)
g928skl
g928tw8
Abdulrahman89 said:
I rooted my phone yesterday from another kernel and It works but the WiFi does not work.
This is my phone's version G925FXXU3C0I9
Android version 5.1.1
Click to expand...
Click to collapse

nunis1903 said:
ok dont flash this version since its for the
g920fi
g920skl
g920tw8
g925fi
g925skl
g925tw8
g928fci (You can flash this on Indian firmware as well)
g928skl
g928tw8
Click to expand...
Click to collapse
so what should I do ?

The 'SE' part of SEandroid stands for 'security enhancements' and is like SELinux developed by the NSA. You might have also noticed this message in red letters when booting into a custom recovery. Basically, the phones knows that the kernel or recovery is not legitimate software made by the manufacturer and does not have the same security layers intact

Im sorry for such the late reply but before tried rooting your phone did you factory reset ??

nunis1903 said:
Im sorry for such the late reply but before tried rooting your phone did you factory reset ??
Click to expand...
Click to collapse
Is that a key thing to do`? I too cant get twrp or cf-root to work (boot loops). Have not done a factory reset. Should I do it in stock recovery and then go to download and flash with odin`?

Solved it!
Installed a new boot-loader since thats what was wrong with my stock ROM. I installer this bootloader 5.1.1: https://drive.google.com/folderview?...p=sharing#list (BOOTLOADER_G925FXXU3COI9-L(5.1.1).tar) (BL in odin) and TWRP (AP in odin) at the same time and voíla recovery can be entered