How can I downgrade from 4.3 to 4.1.2 Galaxy S3 TMobile, I keep on trying but I cant. I keep getting the errors below ...
<ID:0/010> Added!!
<ID:0/010> Removed!!
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_TMO_T999LUVAMB7.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> aboot.mbn
<ID:0/012> NAND Write Start!!
<ID:0/012> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
If you updated via Ota or Odin, you're hosed AFAIK. Unless you used doc's ROM and special kernel setup, that's not possible to go back
Sent from my SGH-T999L using Tapatalk
I used this from Doc's (T999NUVUBMK7_T999NTMBBMK7_T999NUVUBMK7_HOME.tar) ... So there is no way to go back?
thetolsonator said:
If you updated via Ota or Odin, you're hosed AFAIK. Unless you used doc's ROM and special kernel setup, that's not possible to go back
Sent from my SGH-T999L using Tapatalk
Click to expand...
Click to collapse
You can only downgrade by flashing a 4.1.2 rom with custom recovery.. And your warranty bit will get tripped
Sent from my SGH-M919 using Tapatalk
Related
Hello I am new to rooting, but i wanted to start with a stock rom w/root and go from there. Now I followed (or thought i followed) the guides using Odin but i keep getting a fail. This is what it looks like:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t0lte-t0ltexx-gtn7105.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Also I am on Verizon (US) 4G LTE version. Model # SCH-1605
Sorry if this is in the wrong place.
Sent from my SCH-I605 using xda app-developers app
What odin version are you using???
Try odin epic 4g
Sent from my GT-N7100 using xda app-developers app
Remo2V56 said:
Hello I am new to rooting, but i wanted to start with a stock rom w/root and go from there. Now I followed (or thought i followed) the guides using Odin but i keep getting a fail. This is what it looks like:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t0lte-t0ltexx-gtn7105.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Also I am on Verizon (US) 4G LTE version. Model # SCH-1605
Sorry if this is in the wrong place.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Because you're attempting to flash wrong file.
btw Your device is SCH-i605, not SCH-1605
Download the correct file for your device (SCH-i605) from here http://autoroot.chainfire.eu/
Hello all
So im trying to flash the MJ5 bootloarder for my note 2 in order to the wifi working for the DN3 rom. But every time i try to flash the bootloader in odin if fails. What should I do?
Thanks
this is what it says in the message box:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N7100XXUEMJ5_1903221_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
weedmon21 said:
Hello all
So im trying to flash the MJ5 bootloarder for my note 2 in order to the wifi working for the DN3 rom. But every time i try to flash the bootloader in odin if fails. What should I do?
Thanks
this is what it says in the message box:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N7100XXUEMJ5_1903221_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
+1
On which bootloader are you currently?
Sent from my GT-N7100 using XDA Premium 4 mobile app
manan999583 said:
On which bootloader are you currently?
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not sure. Im guessing the problem because im using the tmobile note 2. I did read through the DN3 posts and someone got theirs to work...
weedmon21 said:
Not sure. Im guessing the problem because im using the tmobile note 2. I did read through the DN3 posts and someone got theirs to work...
Click to expand...
Click to collapse
I don't think your tmobile note 2 is causing the failure. My i317 also have this problem.
I tried different MJ5 but still failed at the same way and also after I flash the DN3 4.4 for , my the baseband will become unknown.
I was installing cyanogenmod but something soft-briked it so I went back and did the unrooting process but this time installed 4.4.2 instead of the older rom. After trying to root I learned that the stock rom I was on patched rooting away. Now I'm stuck and even trying to downgrade I get the following error in odin. All my searching I haven't found anything on how to fix this. Can someone help, all the guides on the forum do not work.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Guess I didn't need to do that, still was able to flash custom rom, thought i lost that ability. Now I only have to worry about the whole flag for warranty
.
Try getting another stock file, what I mean by another I mean find it from xdas s4 thread and a new version of Odin, preferably a older version
Sent from my SGH-M919 using XDA Premium 4 mobile app
hi, today i was trying to downgrade from 4.4 to 4.3 but i think i messed up
anyways, im trying to flash "L900VPUBMK4_L900SPTBMK4_HOME.tar.md5" but i keep getting
on phone "sw rev.check fail. device:3, binary:2"
Code:
[SIZE="2"]<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006>
<ID:0/006>
<OSM> All threads completed. (succeed 0 / failed 1)[/SIZE]
on newer odin i get
Code:
[SIZE="2"]<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L900VPUBMK4_L900SPTBMK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)[/SIZE]
also i can access download mode and cwm recovery.
can any one help me??? plzzzz any help is apreciated
If you're on the latest NE2 firmware it is impossible to downgrade back to mk4 due to Knox boot loader, download the NE2 tar and flash it thru Odin... good luck! You might have to look for a partition fix posted by jlmancuso somewhere in a buried thread...
I was able to flash http://forum.xda-developers.com/showthread.php?t=2541395 using twrp and abd. After that i downloaded mobile odin and installed stock mk4
Sent from my SPH-L900 using XDA Free mobile app
I have a I747 that I am converting to TMobile. I've been mostly successful, but I have not been able to load the TMobile 4.3 ROM on it. Help!
It's a T999 that I put a I747 motherboard in. I unlocked the phone, put in a tmo sim, set up fast.t-mobile. So far so good.
I have been utterly unable to load the TMobile ROM.
I was able to use Odin 3.07 to root the phone, using
CF-Auto-Root-d2can-d2vl-sghi747m.tar, so Odin talks to the phone just fine. After doing this, SuperSU disabled Knox just fine. The phone is currently on 4.3.
But when I use T999UVUENC2_T999TMBENC2_T999UVUENC2_HOME.tar.md5 to load Tmobile 4.3, I get a SB12 error on the phone. Odin gives me this error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVUENC2_T999TMBENC2_T999UVUENC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sbl2.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
If anyone can help, I would be most appreciative. And if anyone can point me to a thread where this was already discussed, I would happily swallow my pride and Do Another F'ing Search.