I applied MIME Ghost on N5. No bubbles. It was excellent. However, when I used the Cruzerlite Bugdroid Case, it was a tight fit and lifted the corners of the glass protector. There are 4 massive bubbles around the corners.:crying:
Fortunately, I read a fix here. I put a clip on the corner with microfiber cloth acting as cushion. So far so good. :fingers-crossed:
I need to buy a case now. Can anyone tell me which cases don't cause such problems?
Thanks In Advance.
Bump!
ringke fusion fits
The ultraslim LG hardshell fits
Spigen ultra thin air crystal case works well
Related
View attachment 1628614So I finally got a tpu case for my s3. And now I'm in the market for a new screen protector. I've searched around the forum, and the consensus is that screen protectors that cover the entire front of the phone (e.g. realook 3d forming and spigen curved crystal) will eventually just start getting pushed up at the edges by the tight tpu case. However, looking at my cheapo ebay case, the edges of the case only just barely cover the chrome edges of the phone, no more. I'm wondering if anyone has experience trying out a full coverage screen protector along with a tpu case. Is it feasible? Here's a link to the case I'm using:
http://www.ebay.com/itm/NEW-Black-S-Curve-Soft-Gel-Back-Case-TPU-Cover-for-SAMSUNG-Galaxy-S3-III-L710-/130746295599?pt=PDA_Accessories&hash=item1e7116252f
I've tried a few full screen protectors with my diztronics tpu case and they all bubbled up at the edges. I finally went with the dba just like glass protector because I hated the edges being raised and it works perfect with the case. It's also very clear and smooth. I would recommend it over everything I've tried so far (cheap protector that came with the case, skinomi tech skin and zagg invisible shield). You won't regret it, great protector.
Sent from my SAMSUNG-SGH-I747 using xda premium
I believe all full screen protectors will cause issues with slim tpu cases because they dont overlap the protector. My xtremeguard lifts with my zoogue case.. but not with my uag nor seidio surface or any other bigger case
Sent from my Galaxy S3 using neighbors wifi
well I guess that settles it. Now I just need to find one that's compatible with tpu cases and has some decent coverage over the edges of the screen (but not just the screen itself). I had a realook crystal on my old mytouch 4g, and that one covered almost the entire face of the phone. I would just get another realook crystal clear, but the one for the s3 just only barely covers the screen and almost none of the rest of the face of the phone. It looks cheesy. Thinking about trying spigen crystal. The nano seems to dent/scratch too easily. I just want a protector that would work well with a tpu case and provide more coverage (not entire face of course) than just the lcd screen alone. Something with ~2mm gaps on the sides would probably accommodate a tpu case. No? It's just too difficult to tell how much space each protector leaves around the edges of the screen.
That also reminds me, do the sgp ultra crystal (latest revision) and sgp ultra nano both cover the same amount of surface on the s3? I understand that the nano is thinner. So perhaps it covers more of the face of the phone. Please reply if you know.
I was going to post a similar thread. I didn't have an issue with a Zagg shield + TPU case on my DINC2 but the one I bought off eBay (where I bought my other ones) has been causing bubbles. This bums me out because I feel that the phone is incredibly slippery without a case.
Sent from my SCH-I535 using xda app-developers app
I have Realook 3D full coverage screen protector. It works with some cheap HK TPU cases, the but doesn't work with Diztronic TPU case.
Sent from my GT-P7300 using Tapatalk HD
zmagas1 said:
I have Realook 3D full coverage screen protector. It works with some cheap HK TPU cases, the but doesn't work with Diztronic TPU case.
Sent from my GT-P7300 using Tapatalk HD
Click to expand...
Click to collapse
That's what I needed to hear! I have the cheap hk tpu case and my friend has the diztronic tpu case. So it looks like if I buy the realook 3d forming for me and the spigen ultra crystal for him, then I'll have compatibility for both phones/cases. For anyone curious, here's what I've gleaned from posts on this forum so far.
Spigen Ultra Crystal, ultra nano, and Realook crystal clear will work with any tpu case because the protector just covers the screen, not the most outer edges.
Realook 3d forming will probably only work with tight tpu cases that barely cover the edges of the phone. Although this protector is supposed to have edge-to-edge coverage, others have stated that the protector stops 1-2mm short of the very edges of the phone. So it should work with some tpu cases.
Spigen curved crystal won't work with any tpu cases b/c the protector literally goes exactly to the edge of the phone with no space in between.'
That's what I know for the most popular choices in dry-apply protectors. I'm not interested in wet-apply protectors, but I do know that these will not get messed up by cases because they literally glue to the screen. Post here to let us know if you have any brands/styles of dry-apply protectors to add from experience.
Jottle said:
That's what I needed to hear! I have the cheap hk tpu case and my friend has the diztronic tpu case. So it looks like if I buy the realook 3d forming for me and the spigen ultra crystal for him, then I'll have compatibility for both phones/cases. For anyone curious, here's what I've gleaned from posts on this forum so far.
Spigen Ultra Crystal, ultra nano, and Realook crystal clear will work with any tpu case because the protector just covers the screen, not the most outer edges.
Realook 3d forming will probably only work with tight tpu cases that barely cover the edges of the phone. Although this protector is supposed to have edge-to-edge coverage, others have stated that the protector stops 1-2mm short of the very edges of the phone. So it should work with some tpu cases.
Spigen curved crystal won't work with any tpu cases b/c the protector literally goes exactly to the edge of the phone with no space in between.'
That's what I know for the most popular choices in dry-apply protectors. I'm not interested in wet-apply protectors, but I do know that these will not get messed up by cases because they literally glue to the screen. Post here to let us know if you have any brands/styles of dry-apply protectors to add from experience.
Click to expand...
Click to collapse
Correct. I have tried few cases and few screen protectors.
Screen protectors including Spigen Nano clear, Realook 3D and Glasszone Tempered Glass.
Cases: few cheap HK 2 bucks cases, Seidio Surface, Diztronic TPU and Samsung Protective Cover+.
The best combination for me is Samsung Protective Cover+ and Realook 3D curved screen protector. This combination gives me a solid look and moderate protection. It is best combo for going with formal wear and showing some content for my clients from the phone. It is barely noticable that my phone has case and SP
Sent from my GT-P7300 using Tapatalk HD
zmagas1 said:
I have Realook 3D full coverage screen protector. It works with some cheap HK TPU cases, the but doesn't work with Diztronic TPU case.
Sent from my GT-P7300 using Tapatalk HD
Click to expand...
Click to collapse
Is the one you used the same as the one I have (picture in my first post at the top of the thread)? Anyone else use this case with full screen screen protectors successfully?
I have used this one:
http://www.ebay.com/itm/251137826391?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Sent from my GT-P7300 using Tapatalk HD
---------- Post added at 08:45 PM ---------- Previous post was at 08:42 PM ----------
Anyway I think I'm done with all those cheap cases.
Sent from my GT-P7300 using Tapatalk HD
Well, I should have taken everyone's advice here. I tried to get the realook 3d forming full screen protector to work with my cheapo ebay case, and of course, it pushes up the corners. So sad because I really like the screen protector's coverage. What kinds of cases work with the full screen protectors? (obviously not tpu ones as I've tried both diztronic and mercury without success). If there was just 1 mm less coverage on the full screen protectors, you could use a regular tpu case. My other galaxy s3 has the spy ultra crystal which is also nice, but just barely covers the lcd screen leaving 3-4 mm around the bezel to get scratched. I suppose a result screen protector is my only option if I want to use a tup case as well? please report!
Jottle said:
Well, I should have taken everyone's advice here. I tried to get the realook 3d forming full screen protector to work with my cheapo ebay case, and of course, it pushes up the corners. So sad because I really like the screen protector's coverage. What kinds of cases work with the full screen protectors? (obviously not tpu ones as I've tried both diztronic and mercury without success). If there was just 1 mm less coverage on the full screen protectors, you could use a regular tpu case. My other galaxy s3 has the spy ultra crystal which is also nice, but just barely covers the lcd screen leaving 3-4 mm around the bezel to get scratched. I suppose a result screen protector is my only option if I want to use a tup case as well? please report!
Click to expand...
Click to collapse
Try my suggested tpu case above or get samsung protective cover+.
No problems so far. Using this for two months. No more frustration. Full coverage screen and full coverage bezel protection.
EDIT: I also suggest original samsung TPU cases as they fit perfectly with full screen protectors.
Sent from my GT-I9300 using xda premium
Spigen Modello case works with sp that goes up to the screen edge.
Sent from my GT-I9300 using xda app-developers app
I bought the Spigen Curved Glass screen protector, and I absolutely love the fit. I have zero bubbles anywhere on my screen and everything is laying flat. However, the case I have keeps making the sides of the screen protector come up. Here is the case I have now (which I freaking love):
http://tpu-cases.com/index.php?main...id=275&zenid=1bb0920acd2cedd0634ccf906fa15569
Is there anyone else that has this screen protector and can recommend a case that doesn't make the sides of the protector come up?
WrlsFanatic said:
I bought the Spigen Curved Glass screen protector, and I absolutely love the fit. I have zero bubbles anywhere on my screen and everything is laying flat. However, the case I have keeps making the sides of the screen protector come up. Here is the case I have now (which I freaking love):
http://tpu-cases.com/index.php?main...id=275&zenid=1bb0920acd2cedd0634ccf906fa15569
Is there anyone else that has this screen protector and can recommend a case that doesn't make the sides of the protector come up?
Click to expand...
Click to collapse
I use the Spigen curved crystal screen protector also. Here are the cases that I have that work without peeling the edges up:
UAG
Element Eclipse
Spigen Modello - tpu
j76ms said:
I use the Spigen curved crystal screen protector also. Here are the cases that I have that work without peeling the edges up:
UAG
Element Eclipse
Spigen Modello - tpu
Click to expand...
Click to collapse
Thanks for your response! The UAG is nice, but too bulky. The Element Eclipse looks amazing, but I'll pay $65 for a case the same day I win a lottery. As for Spigen, I don't see a Modello for the SGS3, but I don't like any of their cases. I'd get a flip cover case, but the ones I've seen have no protection for the top or bottom of the phone.
I do very much appreciate your feedback, I'm just hoping for a case that I like and that works with this protector.
The Rock Quicksand has been great for me.
Sent from my SPH-L710 using Tapatalk 2
FYI, I decided to try the Seidio Surface case, thinking that if I could slide the case on it wouldn't be a problem. Fail. Totally pulls the sides of the protector up. Unless I can find a similar, minimalist case that will work with this screen protector, I'll have to just get a different protector.
A little old, but all the cases in on my crappy blog worked fine with the Curved Glass.
Including all metal bumpers.
Spigen Ultra Thin Air
My skinomi screen protector fits exactly on the Nexus 5 glass leaving zero margins or gaps to the edge.
Currently using a Rearth ringke slim case with the Nexus. It fits perfectly and doesn't push on my screen protector, but I am looking for something with more drop protection. Noticed all of the TPU or thicker bumper style cases wrap around the edge of screen a bit and will likely bubble or lift my screen protector up.
Anyone found a durable case that is screen protector friendly?
Momotani-Hitoshi said:
My skinomi screen protector fits exactly on the Nexus 5 glass leaving zero margins or gaps to the edge.
Currently using a Rearth ringke slim case with the Nexus. It fits perfectly and doesn't push on my screen protector, but I am looking for something with more drop protection. Noticed all of the TPU or thicker bumper style cases wrap around the edge of screen a bit and will likely bubble or lift my screen protector up.
Anyone found a durable case that is screen protector friendly?
Click to expand...
Click to collapse
The ringke fusion has the same fit as the slim, but with a bit thicker, all around coverage. I would guess that it doesn't give as much impact protection as tpu cases, but more than the slim.
Sent from my Nexus 5 using Tapatalk
The Ringke Fusion is very similar to the Spigen Ultra Hybrid. http://i.imgur.com/2869wVa.jpg Shows a side cross section. Looks like it has minimal contact with the edge. I might give one of those a shot.
The official nexus bumper case from Google does not interfere with the screen protector at all. I have the Spigen Neo Hybrid, which bubbles the edge of the screen protector in some areas. Also have a Nilkin case from eBay that bubbles the lower right corner.
The Google bumper is perfect. No interference at all.
I've had the Diztronic tpu case on for a few days now. It's causing no problems with my Spigen PET film screen protector.
Sent from my Nexus 5 using Tapatalk
I had a Spigen Nano Glass.t and it worked great with the Neo Hybrid, but when I tried the Diztronic TPU case, it wouldn't work because the front lip overlaps too much that it pushes against the edges of the glass protector, and lifts it up.
Anyone have a list of cases that work with glass protectors? I'd like something smaller than the Neo Hybrid, like a TPU case.
dmo580 said:
I had a Spigen Nano Glass.t and it worked great with the Neo Hybrid, but when I tried the Diztronic TPU case, it wouldn't work because the front lip overlaps too much that it pushes against the edges of the glass protector, and lifts it up.
Anyone have a list of cases that work with glass protectors? I'd like something smaller than the Neo Hybrid, like a TPU case.
Click to expand...
Click to collapse
Truglass works with screen protector must cases due to its smaller cut
Hi,
I am planning to buy a protection for my N5, right now I got some wallet case but thing thing is way too big, I like the "slimness" of this phone but it needs protection (from me...).
I found these 2 things:
Spigen Ultra Hydrid case, with air cushing stuff that seems to be good for dropping off the phone.
http://www.amazon.fr/Spigen-Housse-...ref=lh_ni_t?ie=UTF8&psc=1&smid=A1Y74JCVNKYJ4E
Orzly Tempered glass, cheap and report says it do the job.
http://www.amazon.fr/Orzly®-Protect...416698&sr=8-1&keywords=nexus+5+tempered+glass
Did anyone tried the both together?
Does it fit well?
Should I go for plastic screen protection?
I am looking for a case to protect the phone from drops, but something thin so it fit well in tight pockets.
Thanks for your remarks.
Regards,
Anyone tried it?
Well i have just installed the nillkin tempered glass screen protector with mine sgp ultra hybrid and it fits perfectly. The screen protector is a bit smaller then the screen itself, so the lips of the case aren't touching it directly and therefore not lifting the protector. I guess the one you are looking into should also fit with this case.
I'm using a Spigen Ultra Fit + Nillkin Tempered Glass at the moment. I've already ordered a MIME Ghost, because my Nillkin's Oleophobic Coating has ran out, and I hate the proximity sensor cutout.
Freshly baked from my Nexus 5