Develop Bugs

Case-Mate "Pop" case or "Tough Case?"(& do they come with a screen protector ?

Case-Mate "Pop" case or "Tough Case?"(& do they come with a screen protector ?
Simple questions here:
What is the diff b/w a Pop Case and a Tough Case? Will the Pop case protect the Nexus if it falls on the ground as well as the Tough Case?
case-mate always includes a screen protector....is there one included with these cases??

bump...anyone?

i<3myphone said:
Simple questions here:
What is the diff b/w a Pop Case and a Tough Case? Will the Pop case protect the Nexus if it falls on the ground as well as the Tough Case?
case-mate always includes a screen protector....is there one included with these cases??
Click to expand...
Click to collapse
They have stopped including the screen protector or at least it was not included with the tough case.
The pop has a less nice 'feel' to it for my tastes, so I would recommend the tough between the two.

I definitely didn't get a screen protector with my tough case but I bought an sgp flex and the edges of the screen protector are nicely covered by the case.
Sent from my Galaxy Nexus using Tapatalk

I didn't get a screen protector with my toughcase. I have a Zagg though, but I'm a little annoyed that the silicone part of the toughcase has the tendency to push at the edge of the Zagg at the bottom corners. I guess this is because the Zagg doesn't fit completely from edge to edge. I got it centered as best I could and I consider myself decently skilled at applying these things. Oh and the toughcase silicone is a dust magnet.

Screen protector compatible with Otter Box commuter case

Just like the title says, I recently scratched my screen protector which is pretty noticeable. I noticed the one that came with the Otter Box commuter case doesn't cover the entire screen because the rubber part covers the edges. Is there a particular screen protector I should use? Thx!
Sent from my SCH-I535 using xda app-developers app

i don't think there's a screen protector that will cover the entire front part (unless you're gonna cover the entire phone like some of the wrap protectors out there.

The spigen curved crystal is compatible with Commuter. But the sp only compatible with Commuter as commuter had bigger lips to cover the front screen. If u wish to change others case, choose the spigen ultra crystal.
Sent from my GT-I9300 using xda premium

I've used Spigen, Zagg and cheapo screen protectors (2/$10 dry-apply) with my Commuter cases.
Basically, if it's a flexible plastic screen protector it should fit under the silicone undershell of the Commuter. Just be careful when putting on the Commuter case - make sure you don't fold or "roll up" the screen protector as you put on the silicone. Once you have the silicone on, "flip" (just a quick lift/release) the lip of the silicone around the screen to make sure there's no pressure on the screen protector trying to side it around and push wrinkles into it. Then carefully put the outer shell on being careful to shift the silicone as little as possible.
Probably more than was needed to be said but hey, I called off work sick today.

Tpu case + full coverage screen protector

View attachment 1628614So I finally got a tpu case for my s3. And now I'm in the market for a new screen protector. I've searched around the forum, and the consensus is that screen protectors that cover the entire front of the phone (e.g. realook 3d forming and spigen curved crystal) will eventually just start getting pushed up at the edges by the tight tpu case. However, looking at my cheapo ebay case, the edges of the case only just barely cover the chrome edges of the phone, no more. I'm wondering if anyone has experience trying out a full coverage screen protector along with a tpu case. Is it feasible? Here's a link to the case I'm using:
http://www.ebay.com/itm/NEW-Black-S-Curve-Soft-Gel-Back-Case-TPU-Cover-for-SAMSUNG-Galaxy-S3-III-L710-/130746295599?pt=PDA_Accessories&hash=item1e7116252f

I've tried a few full screen protectors with my diztronics tpu case and they all bubbled up at the edges. I finally went with the dba just like glass protector because I hated the edges being raised and it works perfect with the case. It's also very clear and smooth. I would recommend it over everything I've tried so far (cheap protector that came with the case, skinomi tech skin and zagg invisible shield). You won't regret it, great protector.
Sent from my SAMSUNG-SGH-I747 using xda premium

I believe all full screen protectors will cause issues with slim tpu cases because they dont overlap the protector. My xtremeguard lifts with my zoogue case.. but not with my uag nor seidio surface or any other bigger case
Sent from my Galaxy S3 using neighbors wifi

well I guess that settles it. Now I just need to find one that's compatible with tpu cases and has some decent coverage over the edges of the screen (but not just the screen itself). I had a realook crystal on my old mytouch 4g, and that one covered almost the entire face of the phone. I would just get another realook crystal clear, but the one for the s3 just only barely covers the screen and almost none of the rest of the face of the phone. It looks cheesy. Thinking about trying spigen crystal. The nano seems to dent/scratch too easily. I just want a protector that would work well with a tpu case and provide more coverage (not entire face of course) than just the lcd screen alone. Something with ~2mm gaps on the sides would probably accommodate a tpu case. No? It's just too difficult to tell how much space each protector leaves around the edges of the screen.

That also reminds me, do the sgp ultra crystal (latest revision) and sgp ultra nano both cover the same amount of surface on the s3? I understand that the nano is thinner. So perhaps it covers more of the face of the phone. Please reply if you know.

I was going to post a similar thread. I didn't have an issue with a Zagg shield + TPU case on my DINC2 but the one I bought off eBay (where I bought my other ones) has been causing bubbles. This bums me out because I feel that the phone is incredibly slippery without a case.
Sent from my SCH-I535 using xda app-developers app

I have Realook 3D full coverage screen protector. It works with some cheap HK TPU cases, the but doesn't work with Diztronic TPU case.
Sent from my GT-P7300 using Tapatalk HD

zmagas1 said:
I have Realook 3D full coverage screen protector. It works with some cheap HK TPU cases, the but doesn't work with Diztronic TPU case.
Sent from my GT-P7300 using Tapatalk HD
Click to expand...
Click to collapse
That's what I needed to hear! I have the cheap hk tpu case and my friend has the diztronic tpu case. So it looks like if I buy the realook 3d forming for me and the spigen ultra crystal for him, then I'll have compatibility for both phones/cases. For anyone curious, here's what I've gleaned from posts on this forum so far.
Spigen Ultra Crystal, ultra nano, and Realook crystal clear will work with any tpu case because the protector just covers the screen, not the most outer edges.
Realook 3d forming will probably only work with tight tpu cases that barely cover the edges of the phone. Although this protector is supposed to have edge-to-edge coverage, others have stated that the protector stops 1-2mm short of the very edges of the phone. So it should work with some tpu cases.
Spigen curved crystal won't work with any tpu cases b/c the protector literally goes exactly to the edge of the phone with no space in between.'
That's what I know for the most popular choices in dry-apply protectors. I'm not interested in wet-apply protectors, but I do know that these will not get messed up by cases because they literally glue to the screen. Post here to let us know if you have any brands/styles of dry-apply protectors to add from experience.

Jottle said:
That's what I needed to hear! I have the cheap hk tpu case and my friend has the diztronic tpu case. So it looks like if I buy the realook 3d forming for me and the spigen ultra crystal for him, then I'll have compatibility for both phones/cases. For anyone curious, here's what I've gleaned from posts on this forum so far.
Spigen Ultra Crystal, ultra nano, and Realook crystal clear will work with any tpu case because the protector just covers the screen, not the most outer edges.
Realook 3d forming will probably only work with tight tpu cases that barely cover the edges of the phone. Although this protector is supposed to have edge-to-edge coverage, others have stated that the protector stops 1-2mm short of the very edges of the phone. So it should work with some tpu cases.
Spigen curved crystal won't work with any tpu cases b/c the protector literally goes exactly to the edge of the phone with no space in between.'
That's what I know for the most popular choices in dry-apply protectors. I'm not interested in wet-apply protectors, but I do know that these will not get messed up by cases because they literally glue to the screen. Post here to let us know if you have any brands/styles of dry-apply protectors to add from experience.
Click to expand...
Click to collapse
Correct. I have tried few cases and few screen protectors.
Screen protectors including Spigen Nano clear, Realook 3D and Glasszone Tempered Glass.
Cases: few cheap HK 2 bucks cases, Seidio Surface, Diztronic TPU and Samsung Protective Cover+.
The best combination for me is Samsung Protective Cover+ and Realook 3D curved screen protector. This combination gives me a solid look and moderate protection. It is best combo for going with formal wear and showing some content for my clients from the phone. It is barely noticable that my phone has case and SP
Sent from my GT-P7300 using Tapatalk HD

zmagas1 said:
I have Realook 3D full coverage screen protector. It works with some cheap HK TPU cases, the but doesn't work with Diztronic TPU case.
Sent from my GT-P7300 using Tapatalk HD
Click to expand...
Click to collapse
Is the one you used the same as the one I have (picture in my first post at the top of the thread)? Anyone else use this case with full screen screen protectors successfully?

I have used this one:
http://www.ebay.com/itm/251137826391?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Sent from my GT-P7300 using Tapatalk HD
---------- Post added at 08:45 PM ---------- Previous post was at 08:42 PM ----------
Anyway I think I'm done with all those cheap cases.
Sent from my GT-P7300 using Tapatalk HD

Well, I should have taken everyone's advice here. I tried to get the realook 3d forming full screen protector to work with my cheapo ebay case, and of course, it pushes up the corners. So sad because I really like the screen protector's coverage. What kinds of cases work with the full screen protectors? (obviously not tpu ones as I've tried both diztronic and mercury without success). If there was just 1 mm less coverage on the full screen protectors, you could use a regular tpu case. My other galaxy s3 has the spy ultra crystal which is also nice, but just barely covers the lcd screen leaving 3-4 mm around the bezel to get scratched. I suppose a result screen protector is my only option if I want to use a tup case as well? please report!

Jottle said:
Well, I should have taken everyone's advice here. I tried to get the realook 3d forming full screen protector to work with my cheapo ebay case, and of course, it pushes up the corners. So sad because I really like the screen protector's coverage. What kinds of cases work with the full screen protectors? (obviously not tpu ones as I've tried both diztronic and mercury without success). If there was just 1 mm less coverage on the full screen protectors, you could use a regular tpu case. My other galaxy s3 has the spy ultra crystal which is also nice, but just barely covers the lcd screen leaving 3-4 mm around the bezel to get scratched. I suppose a result screen protector is my only option if I want to use a tup case as well? please report!
Click to expand...
Click to collapse
Try my suggested tpu case above or get samsung protective cover+.
No problems so far. Using this for two months. No more frustration. Full coverage screen and full coverage bezel protection.
EDIT: I also suggest original samsung TPU cases as they fit perfectly with full screen protectors.
Sent from my GT-I9300 using xda premium

Spigen Modello case works with sp that goes up to the screen edge.
Sent from my GT-I9300 using xda app-developers app

Cases for Spigen Curved Glass Screen Protectors

I bought the Spigen Curved Glass screen protector, and I absolutely love the fit. I have zero bubbles anywhere on my screen and everything is laying flat. However, the case I have keeps making the sides of the screen protector come up. Here is the case I have now (which I freaking love):
http://tpu-cases.com/index.php?main...id=275&zenid=1bb0920acd2cedd0634ccf906fa15569
Is there anyone else that has this screen protector and can recommend a case that doesn't make the sides of the protector come up?

WrlsFanatic said:
I bought the Spigen Curved Glass screen protector, and I absolutely love the fit. I have zero bubbles anywhere on my screen and everything is laying flat. However, the case I have keeps making the sides of the screen protector come up. Here is the case I have now (which I freaking love):
http://tpu-cases.com/index.php?main...id=275&zenid=1bb0920acd2cedd0634ccf906fa15569
Is there anyone else that has this screen protector and can recommend a case that doesn't make the sides of the protector come up?
Click to expand...
Click to collapse
I use the Spigen curved crystal screen protector also. Here are the cases that I have that work without peeling the edges up:
UAG
Element Eclipse
Spigen Modello - tpu

j76ms said:
I use the Spigen curved crystal screen protector also. Here are the cases that I have that work without peeling the edges up:
UAG
Element Eclipse
Spigen Modello - tpu
Click to expand...
Click to collapse
Thanks for your response! The UAG is nice, but too bulky. The Element Eclipse looks amazing, but I'll pay $65 for a case the same day I win a lottery. As for Spigen, I don't see a Modello for the SGS3, but I don't like any of their cases. I'd get a flip cover case, but the ones I've seen have no protection for the top or bottom of the phone.
I do very much appreciate your feedback, I'm just hoping for a case that I like and that works with this protector.

The Rock Quicksand has been great for me.
Sent from my SPH-L710 using Tapatalk 2

FYI, I decided to try the Seidio Surface case, thinking that if I could slide the case on it wouldn't be a problem. Fail. Totally pulls the sides of the protector up. Unless I can find a similar, minimalist case that will work with this screen protector, I'll have to just get a different protector.

A little old, but all the cases in on my crappy blog worked fine with the Curved Glass.
Including all metal bumpers.

Spigen Ultra Thin Air

General Inquiry About Screen Protectors

Just a question to those of you, I'm assuming most, who put a screen protector on your phone. I've been having troubles with the Nexus 5 screen protectors, specifically a matted protector from Ghost Armor, in which my common TPU case pushes up the corners of the protector rather severely.
I've put screen protectors on all my many phones and have never had such a problem, I'm assuming it has something to do with the Nexus 5's small bezel and how close both the case and the screen protector come out to the edges.
I'm just wondering if this is a common problem with any brand of screen protector and any case in general. Has anyone else had this happen?
I ordered a Spigen Neo Hybrid a couple days ago and plan to get my Ghost Armor reapplied, but now I'm wondering if there is a point to doing so if this will just happen again.

I don't have the ghost armor, but I have had both Spigen PET and glass screen protectors on the phone, and the Neo Hybrid case did not cause listing on either. The Spigen Slim Armor, and the Ringke Fusion also did not cause lifting of either screen protector. The Ballistic SG Maxx does not cause lifting of my glass screen protector, have not tried it with PET.
Sent from my Nexus 5 using Tapatalk

Bleys43 said:
I don't have the ghost armor, but I have had both Spigen PET and glass screen protectors on the phone, and the Neo Hybrid case did not cause listing on either. The Spigen Slim Armor, and the Ringke Fusion also did not cause lifting of either screen protector. The Ballistic SG Maxx does not cause lifting of my glass screen protector, have not tried it with PET.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply, I'm glad to hear that the Neo Hybrid didn't cause any lifting hopefully the same is with Ghost Armor. Side note, you mention having a glass screen protector is there any trouble fitting that with the Neo Hybrid? Not with the lifting, but like with how tight it is or something.

AgentBEATS said:
Thanks for the reply, I'm glad to hear that the Neo Hybrid didn't cause any lifting hopefully the same is with Ghost Armor. Side note, you mention having a glass screen protector is there any trouble fitting that with the Neo Hybrid? Not with the lifting, but like with how tight it is or something.
Click to expand...
Click to collapse
I find glass screen protectors much easier to get applied than traditional plastic ones. They go on easier (apply themselves) and have less air bubbles. I only ended up with one, and it was too late to re-apply the screen, so I just left it
prshosting.org

When the case "hugs" the lip of the phone some what and the screen protector goes right to the edge this can happen. Ringke Fusion doesn't seem to "hug" much at all and I haven't read anyone having these issues with it.