Hi,
I had rooted my samsung galaxy note 2 a year ago. Till then I successfully flashed many ROMs. However recently when I tried to install DN3 (Ditto Note 3) ROM, when it rebooted my phone stuck on the "Samsung Note GT-n7100" logo and could not move further. It was "soft" bricked. I installed Philz recovery through ODIN and able to restore my data. After then I tried 2-3 times to install the same ROM but every time the installation failed in between.
At last I tried to install Phoenix touchwiz ROM but my phone got hanged again in between during installation. It seems there is some problem in my internal memory card which comes in between during installation.
Do I need to format my internal memory? Please let me know the probable causes of this issue.
Just wanted to tell you that all the time I wiped cache + Wipe Cache partition + Wipe Delvik Cache before commencing installation.
your comments would be greatly appreciated!
Are you sure you have correct recovery? Phils v6 is incompatible with Aroma installers, you should use v5.15
Earlier I used "ROM Manager" to install the ROM but when it hanged then I used Philz 6.0. Should I use Ver. 5 for the same?
KailashBisht said:
Earlier I used "ROM Manager" to install the ROM but when it hanged then I used Philz 6.0. Should I use Ver. 5 for the same?
Click to expand...
Click to collapse
If you are installing ROMs from recovery and those ROMs have AROMA installer you should use Phils 5.15. Version 6.x hangs on Aroma.
dalanik said:
If you are installing ROMs from recovery and those ROMs have AROMA installer you should use Phils 5.15. Version 6.x hangs on Aroma.
Click to expand...
Click to collapse
Hi,
used the attached file and flash using Odin. its philz_touch_5.15.0-n7100.tar.md5
good luck buddy.
Related
Hello,
Only to comment.
I have a Samsung Galaxy Note 2 AT&T SGH-i317, and I was a problem installing new roms because of a corrupt internal SD that I could repair asking this Forum.
After have formated /sdcard I tried to install some new rom expecting it works. At this moment I had CWM Recovery (v 2.something, a touch one).
I tried with CleanROM 4.5 and it's stuck in the same place that before (after the seconf "Next" press). I must say it has Aroma installer.
But affortunately I tried later with JediXPX, that install witouht Aroma. And it was flawless!
So I tried with Skynote 7 (i guess) that install without Aroma also, and it works.
Finally I tried with N7105XXDMA8, wich has Aroma installer and stuck again in the middle of the process.
The solution?
I installed TWRP via Goo Managaer, boot in Recovery and could install both: CleanROM and N7105.
Please keep in mind when to choose your Recovery!
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
nish1991 said:
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
Click to expand...
Click to collapse
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
Source file? Are you speaking about the rom file I downloaded ?
Yes after installing the rom there is message Updated Successfully in CWM.
But i wiped the data and cache before installing the rom and dalvik cache after installing the rom..
Please help....can you give me detailed steps for installing rom.
If you are coming from stock rom after it shows installation complete again wipe all DATA frm cwm and reboot
Sent from my GT-I9505 using Tapatalk 2
Sulaimanshariff said:
If you are coming from stock rom after it shows installation complete again wipe all DATA frm cwm and reboot
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
Hey no worries...
I just installed another Xperia Z rom...and everything is grt nw....
Same Problem it is stucked now on that sceen and I too got the massage that it is install successfully... I cant install any other ROM as I want to use dual sim and most of the ROM are not compatible with dual SIM.... PLEASE HELP
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
nish1991 said:
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
Click to expand...
Click to collapse
"Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin."
can you tell me how you did?? i am a newbie
stuck in boot loop
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
yes everything went right but after i click reboot than i try to start samsung galaxy grand i9082 logo appears there it blink 4 5 times then i remove my battery and try to start again but now it is not even opening not cwm recovery menu and not going to the odin download mod also
ODIN mode is also not opening without usb cavle mean opening when plugged into charging.
please help me ,-_-,
, ,
Xperia Z Rom GT-I9082
Which CWM i recovery i use please tell me
i'm using CWM 6.0.2 recovery but when try to install i stuck in installing screen and then automatically back in recovery mode.
MD5 not found
yogeshp007 said:
Which CWM i recovery i use please tell me
i'm using CWM 6.0.2 recovery but when try to install i stuck in installing screen and then automatically back in recovery mode.
MD5 not found
Click to expand...
Click to collapse
Ik think that the CWM version is to old.
Also if you want to go to lollipop later then you can't do this with CWM 6.0.2.
Download a new CWM with an minimum version 6.4.5 or TWRP 2.8.6.0.
Never tried to install the older version roms with TWRP but with CWM I was able to install all.
Installing Rom
Sir i want to install xperia z rom please help me!!
tell me in details please
Hi, I want to ask why I can't install DN3 v3 rom by using cwm philz 5.15
It's always show installation aborted or signature verification fail.
I from stock leak 4.3 N7100XXEMI6 without root
Here is my step to install this rom:
1. root through ordin
2. flash philz 5.15 recovery through ordin
3. full wipe including data, cache, dalvi cache
4. Fix permission
5. clear to install new rom
6. flash the DN3 v3 zip
*while installing zip file it always show installation aborted
*But if install other zip file everything go fine just have the problem on flashing custom rom
I was try many way but still get fail. hope some one can help me solve the problem.
updated 4.3official ane now wanna DN3 Rom v3.0
i just updated 4.3 official version :victory: but now i wanna DN3 Rom v3.0 :silly: so how can i flash give me detail for that
and ya do not update official 4.3 they dont give us any note 3 fetures ...:crying:
Issue flashing DN3 rom
Usually for flashing DN3 rom
1. root your device through ordin or stock recovery
2. flash cwm / twrp / phliz recovery
3. full wipe including data, cache, dalvi cache
4. fix permission
5. flash the DN3 rom (might need take some time)
6. Reboot
7. flash note 3 add on apps throught recovery
For my information is like that, but now i stuck on installing DN3 rom zip file while in philz recovery. always get installation aborted.
how to root in 4.3 official knox
yu133 said:
Usually for flashing DN3 rom
1. root your device through ordin or stock recovery
2. flash cwm / twrp / phliz recovery
3. full wipe including data, cache, dalvi cache
4. fix permission
5. flash the DN3 rom (might need take some time)
6. Reboot
7. flash note 3 add on apps throught recovery
For my information is like that, but now i stuck on installing DN3 rom zip file while in philz recovery. always get installation aborted.
Click to expand...
Click to collapse
but how to root ... installed 4.3 official version
patelsagar said:
i just updated 4.3 official version :victory: but now i wanna DN3 Rom v3.0 :silly: so how can i flash give me detail for that
and ya do not update official 4.3 they dont give us any note 3 fetures ...:crying:
Click to expand...
Click to collapse
it is easy to root ur phone just download these
CWM---- http://forum.xda-developers.com/showthread.php?t=1901196 [download the latest one with (.TAR) extension]
samsung usb drivers---google search for them
ODIN from here----http://forum.xda-developers.com/attachment.php?attachmentid=1168421&d=1341114315
now once u have all of the follow this video so that u can get every step
http://www.youtube.com/watch?list=UUA2XWPjQBJVScn7wQjeqMqA&feature=player_embedded&v=NFHZ535L7is
once ur done just update the superSU
thas for rooting need help to install the rom ask me:good:
Installing stopped at Page 1 of the Samsung apps
Hi there ppl,
I need some help.... i deleted everything, so now, my phone is romless.. n when i tried installing ditto note 3 (v3.1), the start up was ok, until u come to a page where u need to choose which apps you want to download.. i jus pressed next and it jus hanged there.. nothing was moving so i off and on my phone, and i tried again.. but yet, still cant install.. can anyone help... im frustrated here... hmmm....
BTW, i'm using the latest version of philz recovery, followed youtube link, and did exactly, but still... cant do much...
kalpeshneo said:
Hi there ppl,
I need some help.... i deleted everything, so now, my phone is romless.. n when i tried installing ditto note 3 (v3.1), the start up was ok, until u come to a page where u need to choose which apps you want to download.. i jus pressed next and it jus hanged there.. nothing was moving so i off and on my phone, and i tried again.. but yet, still cant install.. can anyone help... im frustrated here... hmmm....
BTW, i'm using the latest version of philz recovery, followed youtube link, and did exactly, but still... cant do much...
Click to expand...
Click to collapse
Just using previous philz touch recovery (Philz 5) and everything will works fine.
Using latest philz 6 will cause eror and hang (it happen to me too and it take a half day too realize the problem in the philz not the Rom )
yu133 said:
Hi, I want to ask why I can't install DN3 v3 rom by using cwm philz 5.15
It's always show installation aborted or signature verification fail.
I from stock leak 4.3 N7100XXEMI6 without root
Here is my step to install this rom:
1. root through ordin
2. flash philz 5.15 recovery through ordin
3. full wipe including data, cache, dalvi cache
4. Fix permission
5. clear to install new rom
6. flash the DN3 v3 zip
*while installing zip file it always show installation aborted
*But if install other zip file everything go fine just have the problem on flashing custom rom
I was try many way but still get fail. hope some one can help me solve the problem.
Click to expand...
Click to collapse
It sounds that you have a damaged file. Download the DN3 v3.1 ROM once it's complete verify its integrity using any MD5 checker tool.
kalpeshneo said:
Hi there ppl,
I need some help.... i deleted everything, so now, my phone is romless.. n when i tried installing ditto note 3 (v3.1), the start up was ok, until u come to a page where u need to choose which apps you want to download.. i jus pressed next and it jus hanged there.. nothing was moving so i off and on my phone, and i tried again.. but yet, still cant install.. can anyone help... im frustrated here... hmmm....
BTW, i'm using the latest version of philz recovery, followed youtube link, and did exactly, but still... cant do much...
Click to expand...
Click to collapse
Use Philz version 5.15, and clean all the data using Philz recovery. Do not select the option "Wipe Data" in the DN3 installer, this may cause your installation process to hang.
dvn2008 said:
It sounds that you have a damaged file. Download the DN3 v3.1 ROM once it's complete verify its integrity using any MD5 checker tool.
Use Philz version 5.15, and clean all the data using Philz recovery. Do not select the option "Wipe Data" in the DN3 installer, this may cause your installation process to hang.
Click to expand...
Click to collapse
Thanks guys for the help.. will download the philz 5.15 then and do it. anyways, ru guys having any problems with the ditto rom? does it hand when u multitask, etc?? coz i heard fr my frens that it hangs often...
appreciate your feedback guys. Thanks
ijsiregar said:
Just using previous philz touch recovery (Philz 5) and everything will works fine.
Using latest philz 6 will cause eror and hang (it happen to me too and it take a half day too realize the problem in the philz not the Rom )
Click to expand...
Click to collapse
I just signed up to say THANKYOU.... install Touchphilz 5!! it works than especially when you install DN3 v.3.1 or above!! thanks again!
Ditto Note 3 -> 3.2
DN3 rom work perfectly for me so far starting from v3 and now in v3.2.
I flashed DN3 rom in following sequence:-
(i) I came from MK4 Wanamlite previously and then I flash TWRP v2.6.0.3 via Odin
(ii) then I flashed MJ5 bootloader (downloaded from JoelDroid rom site) before installing DN3 rom
(iii)then I flashed DN3 v3 successfully.
With the DN3 v3.2 update, I tried dirty flash without wipe but hell lots of problems so finally I did full wipe, format data and then
clean install DN3 v3.2 anf all working perfectly so far including all the Note 3 features.
problem
hi
after i install dn3 ROM i can't make a call the imei is good but not registered to network
please help me
i got the same problem on 7105 Imei but no network, and stuck in factory mode, changing to on and running terminal script didnt help
i just updated 4.4.2 KK official version note 2 but now i wanna DN3 Rom without root..can i use DN3 rom feuture in my phn..
ota 3.2.1
Hi
I have one problem with OTA uppdate
I can't uppdate to 3.2.1
When I push uppdate , displays an error message
What is a problem?
yu133 said:
Usually for flashing DN3 rom
1. root your device through ordin or stock recovery
2. flash cwm / twrp / phliz recovery
3. full wipe including data, cache, dalvi cache
4. fix permission
5. flash the DN3 rom (might need take some time)
6. Reboot
7. flash note 3 add on apps throught recovery
For my information is like that, but now i stuck on installing DN3 rom zip file while in philz recovery. always get installation aborted.
Click to expand...
Click to collapse
Download the zip again and copy it on your sd card(maybe not copied well). This happens to me too
Hi,
I am on CM 10.2 nightly. Everytime I try to install an different ROM on CWM 6.0.27, eg. Android Revolution 22.0, the installation procedure goes fine. During Aroma installer I choose to wipe user data partition and so on. Then after reboot my phone stucks on "samsung galaxy note gt-n7100" screen. Afterwards I have to go back into recovery and have to recover my rom so the phone will boot again. Really strange. Any suggestions why my phone is behaving this way?
Regards, heinzelrumpel
heinzelrumpel said:
Hi,
I am on CM 10.2 nightly. Everytime I try to install an different ROM on CWM 6.0.27, eg. Android Revolution 22.0, the installation procedure goes fine. During Aroma installaer I choose to wipe user data partition and so on. Then after reboot my phone stucks on "samsung galaxy note gt-n7100" screen. Afterwards I have to go back into recovrey and have to recover my rom so the phone will boot again. Really strange. Any suggestions why my phone is beahving this way?
Regards, heinzelrumpel
Click to expand...
Click to collapse
Change the recovery, often Philz 5.15 works best with Aroma installer.
Androidwizzard said:
Change the recovery, often Philz 5.15 works best with Aroma installer.
Click to expand...
Click to collapse
Unfortunately this does not do the trick Still stuck after reboot.
I can't tell you why its happening, but what I've done in the past to get around the issue is to flash a stock rom with Odin, then flash a new recovery before going to another custom rom. If you worry about the Knox warranty bit being set you'll have to find an old 4.1 image somewhere to flash. Since I'm past warranty I don't care anymore.
Good luck!
Wipe data cache dalvik format system etc nstall the new rom reboot and after go again to recovery and factory reset it.
Sent from my GT-N7100 using Tapatalk
Hi everyone
Sorry in case of repost.
I have a P5210 (Samsung Tab 3 Wifi). Once rooted everything was allright until I entered in recovery mode from the Rom Toolbox app.
I'm now stuck in a recovery loop mode and can't get out (CWM v6.0.4.7)
I've tried everything from factory reset / cache and dalvik cache wipe, to "fix" zips and so on. But nothing changes.
I've tried to reinstall CWM by putting a recovery image into a script and flash it through CWM. Seems to be done correctly, but when I reboot, it's still the same CWM (no update)
Eventually, i've tried to install some custom ROMs to start fresh : Every installation crashes at "WRITING SYSTEM PARTITION". I get black screen and a reboot.
And I've tried every custom Rom compatible with P5210.
Can you help me to get back to a clean configuration ?
N.
nicobee75 said:
Hi everyone
Sorry in case of repost.
I have a P5210 (Samsung Tab 3 Wifi). Once rooted everything was allright until I entered in recovery mode from the Rom Toolbox app.
I'm now stuck in a recovery loop mode and can't get out (CWM v6.0.4.7)
I've tried everything from factory reset / cache and dalvik cache wipe, to "fix" zips and so on. But nothing changes.
I've tried to reinstall CWM by putting a recovery image into a script and flash it through CWM. Seems to be done correctly, but when I reboot, it's still the same CWM (no update)
Eventually, i've tried to install some custom ROMs to start fresh : Every installation crashes at "WRITING SYSTEM PARTITION". I get black screen and a reboot.
And I've tried every custom Rom compatible with P5210.
Can you help me to get back to a clean configuration ?
N.
Click to expand...
Click to collapse
Hi
It seems you were on kitkat rom which may have updated your bootloader to kitkat version. The CWM needs to be updated to work well with kitkat. I had similar problem with my SM-T210, and solved the problem after updating CWM as per this post for T210:
http://forum.xda-developers.com/showthread.php?t=2433853
Your tab is different from mine so i think you need a fresh stock rom install using odin, then find an updated CWM for your tab.