Hi, I want to ask why I can't install DN3 v3 rom by using cwm philz 5.15
It's always show installation aborted or signature verification fail.
I from stock leak 4.3 N7100XXEMI6 without root
Here is my step to install this rom:
1. root through ordin
2. flash philz 5.15 recovery through ordin
3. full wipe including data, cache, dalvi cache
4. Fix permission
5. clear to install new rom
6. flash the DN3 v3 zip
*while installing zip file it always show installation aborted
*But if install other zip file everything go fine just have the problem on flashing custom rom
I was try many way but still get fail. hope some one can help me solve the problem.
updated 4.3official ane now wanna DN3 Rom v3.0
i just updated 4.3 official version :victory: but now i wanna DN3 Rom v3.0 :silly: so how can i flash give me detail for that
and ya do not update official 4.3 they dont give us any note 3 fetures ...:crying:
Issue flashing DN3 rom
Usually for flashing DN3 rom
1. root your device through ordin or stock recovery
2. flash cwm / twrp / phliz recovery
3. full wipe including data, cache, dalvi cache
4. fix permission
5. flash the DN3 rom (might need take some time)
6. Reboot
7. flash note 3 add on apps throught recovery
For my information is like that, but now i stuck on installing DN3 rom zip file while in philz recovery. always get installation aborted.
how to root in 4.3 official knox
yu133 said:
Usually for flashing DN3 rom
1. root your device through ordin or stock recovery
2. flash cwm / twrp / phliz recovery
3. full wipe including data, cache, dalvi cache
4. fix permission
5. flash the DN3 rom (might need take some time)
6. Reboot
7. flash note 3 add on apps throught recovery
For my information is like that, but now i stuck on installing DN3 rom zip file while in philz recovery. always get installation aborted.
Click to expand...
Click to collapse
but how to root ... installed 4.3 official version
patelsagar said:
i just updated 4.3 official version :victory: but now i wanna DN3 Rom v3.0 :silly: so how can i flash give me detail for that
and ya do not update official 4.3 they dont give us any note 3 fetures ...:crying:
Click to expand...
Click to collapse
it is easy to root ur phone just download these
CWM---- http://forum.xda-developers.com/showthread.php?t=1901196 [download the latest one with (.TAR) extension]
samsung usb drivers---google search for them
ODIN from here----http://forum.xda-developers.com/attachment.php?attachmentid=1168421&d=1341114315
now once u have all of the follow this video so that u can get every step
http://www.youtube.com/watch?list=UUA2XWPjQBJVScn7wQjeqMqA&feature=player_embedded&v=NFHZ535L7is
once ur done just update the superSU
thas for rooting need help to install the rom ask me:good:
Installing stopped at Page 1 of the Samsung apps
Hi there ppl,
I need some help.... i deleted everything, so now, my phone is romless.. n when i tried installing ditto note 3 (v3.1), the start up was ok, until u come to a page where u need to choose which apps you want to download.. i jus pressed next and it jus hanged there.. nothing was moving so i off and on my phone, and i tried again.. but yet, still cant install.. can anyone help... im frustrated here... hmmm....
BTW, i'm using the latest version of philz recovery, followed youtube link, and did exactly, but still... cant do much...
kalpeshneo said:
Hi there ppl,
I need some help.... i deleted everything, so now, my phone is romless.. n when i tried installing ditto note 3 (v3.1), the start up was ok, until u come to a page where u need to choose which apps you want to download.. i jus pressed next and it jus hanged there.. nothing was moving so i off and on my phone, and i tried again.. but yet, still cant install.. can anyone help... im frustrated here... hmmm....
BTW, i'm using the latest version of philz recovery, followed youtube link, and did exactly, but still... cant do much...
Click to expand...
Click to collapse
Just using previous philz touch recovery (Philz 5) and everything will works fine.
Using latest philz 6 will cause eror and hang (it happen to me too and it take a half day too realize the problem in the philz not the Rom )
yu133 said:
Hi, I want to ask why I can't install DN3 v3 rom by using cwm philz 5.15
It's always show installation aborted or signature verification fail.
I from stock leak 4.3 N7100XXEMI6 without root
Here is my step to install this rom:
1. root through ordin
2. flash philz 5.15 recovery through ordin
3. full wipe including data, cache, dalvi cache
4. Fix permission
5. clear to install new rom
6. flash the DN3 v3 zip
*while installing zip file it always show installation aborted
*But if install other zip file everything go fine just have the problem on flashing custom rom
I was try many way but still get fail. hope some one can help me solve the problem.
Click to expand...
Click to collapse
It sounds that you have a damaged file. Download the DN3 v3.1 ROM once it's complete verify its integrity using any MD5 checker tool.
kalpeshneo said:
Hi there ppl,
I need some help.... i deleted everything, so now, my phone is romless.. n when i tried installing ditto note 3 (v3.1), the start up was ok, until u come to a page where u need to choose which apps you want to download.. i jus pressed next and it jus hanged there.. nothing was moving so i off and on my phone, and i tried again.. but yet, still cant install.. can anyone help... im frustrated here... hmmm....
BTW, i'm using the latest version of philz recovery, followed youtube link, and did exactly, but still... cant do much...
Click to expand...
Click to collapse
Use Philz version 5.15, and clean all the data using Philz recovery. Do not select the option "Wipe Data" in the DN3 installer, this may cause your installation process to hang.
dvn2008 said:
It sounds that you have a damaged file. Download the DN3 v3.1 ROM once it's complete verify its integrity using any MD5 checker tool.
Use Philz version 5.15, and clean all the data using Philz recovery. Do not select the option "Wipe Data" in the DN3 installer, this may cause your installation process to hang.
Click to expand...
Click to collapse
Thanks guys for the help.. will download the philz 5.15 then and do it. anyways, ru guys having any problems with the ditto rom? does it hand when u multitask, etc?? coz i heard fr my frens that it hangs often...
appreciate your feedback guys. Thanks
ijsiregar said:
Just using previous philz touch recovery (Philz 5) and everything will works fine.
Using latest philz 6 will cause eror and hang (it happen to me too and it take a half day too realize the problem in the philz not the Rom )
Click to expand...
Click to collapse
I just signed up to say THANKYOU.... install Touchphilz 5!! it works than especially when you install DN3 v.3.1 or above!! thanks again!
Ditto Note 3 -> 3.2
DN3 rom work perfectly for me so far starting from v3 and now in v3.2.
I flashed DN3 rom in following sequence:-
(i) I came from MK4 Wanamlite previously and then I flash TWRP v2.6.0.3 via Odin
(ii) then I flashed MJ5 bootloader (downloaded from JoelDroid rom site) before installing DN3 rom
(iii)then I flashed DN3 v3 successfully.
With the DN3 v3.2 update, I tried dirty flash without wipe but hell lots of problems so finally I did full wipe, format data and then
clean install DN3 v3.2 anf all working perfectly so far including all the Note 3 features.
problem
hi
after i install dn3 ROM i can't make a call the imei is good but not registered to network
please help me
i got the same problem on 7105 Imei but no network, and stuck in factory mode, changing to on and running terminal script didnt help
i just updated 4.4.2 KK official version note 2 but now i wanna DN3 Rom without root..can i use DN3 rom feuture in my phn..
ota 3.2.1
Hi
I have one problem with OTA uppdate
I can't uppdate to 3.2.1
When I push uppdate , displays an error message
What is a problem?
yu133 said:
Usually for flashing DN3 rom
1. root your device through ordin or stock recovery
2. flash cwm / twrp / phliz recovery
3. full wipe including data, cache, dalvi cache
4. fix permission
5. flash the DN3 rom (might need take some time)
6. Reboot
7. flash note 3 add on apps throught recovery
For my information is like that, but now i stuck on installing DN3 rom zip file while in philz recovery. always get installation aborted.
Click to expand...
Click to collapse
Download the zip again and copy it on your sd card(maybe not copied well). This happens to me too
Hi,
I had rooted my samsung galaxy note 2 a year ago. Till then I successfully flashed many ROMs. However recently when I tried to install DN3 (Ditto Note 3) ROM, when it rebooted my phone stuck on the "Samsung Note GT-n7100" logo and could not move further. It was "soft" bricked. I installed Philz recovery through ODIN and able to restore my data. After then I tried 2-3 times to install the same ROM but every time the installation failed in between.
At last I tried to install Phoenix touchwiz ROM but my phone got hanged again in between during installation. It seems there is some problem in my internal memory card which comes in between during installation.
Do I need to format my internal memory? Please let me know the probable causes of this issue.
Just wanted to tell you that all the time I wiped cache + Wipe Cache partition + Wipe Delvik Cache before commencing installation.
your comments would be greatly appreciated!
Are you sure you have correct recovery? Phils v6 is incompatible with Aroma installers, you should use v5.15
Earlier I used "ROM Manager" to install the ROM but when it hanged then I used Philz 6.0. Should I use Ver. 5 for the same?
KailashBisht said:
Earlier I used "ROM Manager" to install the ROM but when it hanged then I used Philz 6.0. Should I use Ver. 5 for the same?
Click to expand...
Click to collapse
If you are installing ROMs from recovery and those ROMs have AROMA installer you should use Phils 5.15. Version 6.x hangs on Aroma.
dalanik said:
If you are installing ROMs from recovery and those ROMs have AROMA installer you should use Phils 5.15. Version 6.x hangs on Aroma.
Click to expand...
Click to collapse
Hi,
used the attached file and flash using Odin. its philz_touch_5.15.0-n7100.tar.md5
good luck buddy.
Hello, this will be my first post here at XDA, and i will be asking for your help guys...
I am experiencing bootloop on my phone.
The thing is I tried to install Xposed Installer using the Automatic method that flashes to the recovery.
It reboots them...
It passed the Galaxy Note II N7100 black screen...
It shows the TWRP logo (The blue one)
AND THEN IT JUST REPEAT AND REPEAT the TWRP logo.
I can boot to Download Mode.
Tried removing the battery and tried to enter recovery again using hardware keys, same thing happens.
What can I do now? Please Help.
Thank You!
P.S. I am running DN3 4.3 Stable using it's stock kernel.
sgtfrnz said:
Hello, this will be my first post here at XDA, and i will be asking for your help guys...
I am experiencing bootloop on my phone.
The thing is I tried to install Xposed Installer using the Automatic method that flashes to the recovery.
It reboots them...
It passed the Galaxy Note II N7100 black screen...
It shows the TWRP logo (The blue one)
AND THEN IT JUST REPEAT AND REPEAT the TWRP logo.
I can boot to Download Mode.
Tried removing the battery and tried to enter recovery again using hardware keys, same thing happens.
What can I do now? Please Help.
Thank You!
P.S. I am running DN3 4.3 Stable using it's stock kernel.
Click to expand...
Click to collapse
Well something was messed up when you flashed xposed installer( i don't know what you mean by automatic method) but do a clean install,since you can get into download mode,grab the twrp img.tar and flash it using pc odin ,then you can access recovery, do all the wipes again by going under "advanced" and reflash your rom.Now to install xposed go to xda thread for it and grab the apk from there (i think it's available on play store as well).You should have no more issues
Twrp
Like the previous post said I'm not sure what you've done. When xposed framework is installed there is usually an unistall zip created on the internal so card. If you can get recovery find it and flash it
Sent from my GT-N7105 using Tapatalk
The device is now fixed.
So okay, I followed the above instruction to flash a fresh TWRP. It does not work that way, it still has bootloop on the blue teamwin screen, what i've done is flash a .tar Philz specified for my device and then try to boot it. It boot and then it then flashes the pending Xposed script/flashable that I think TWRP can't execute that's why it bootloop. When it CWM successfully flashed it, I boot and wen't to homescreen. Then I now flashed TWRP via odin.
Thanks everyone, my Note 2 has come back to life.
sgtfrnz said:
So okay, I followed the above instruction to flash a fresh TWRP. It does not work that way, it still has bootloop on the blue teamwin screen, what i've done is flash a .tar Philz specified for my device and then try to boot it. It boot and then it then flashes the pending Xposed script/flashable that I think TWRP can't execute that's why it bootloop. When it CWM successfully flashed it, I boot and wen't to homescreen. Then I now flashed TWRP via odin.
Thanks everyone, my Note 2 has come back to life.
Click to expand...
Click to collapse
Boot into Download mode and flash philsz touch recovery 6 and reboot device .. Everything will be ok>
Old thread may be old, but it's still relevant.
I just tried to install XPosed as well on my Note II and it did the same thing (mine's AT&T)
Info
Device: Note II
XPosed Version: 2.6.1
Install Method: "Recovery (flash zip automatically)"
Recovery Image: TWRP
Mine exhibited the same behavior as OP's, however after leaving it alone for a while to bootloop recovery as much as it wanted to, I came to my laptop, found this post, grabbed as USB cable, and I was just about to start the process of reflashing recovery when all of a sudden I saw my lock screen.
It took roughly five minutes of bootloop to get it there, but it successfully installed XPosed and my device is running fine.
So, for all the other Googler's out there that landed on this post, leave it alone for a while! See what happens. If it's still bootlooping, like, 30 minutes later, then try reflashing TWRP using ODIN. If that still doesn't work, reflash a new ROM using TWRP.
Hi,
I am trying to install rom for my note 2, My phone is completely formatted and it is looping in samsung galaxy Note 2 screen.
I have Philz working currently. I have downloaded many ROMS and GAPPS. i installed the PA rom and i tried to install the gapps, but the version of gapps was not in sync with PA rom.
I am also facing the problem of status 7 error while i try to install other ROMS. Please help me get a ROM and its corresponding GAPPS for my Galaxy Note2. I am very new to android world.
All this happened because i tried to root my phone.
Regards
Himagiri
If u can access downloading mode(volume down+home button+power button), flash the stock ROM.
Sent from my T0LTE using XDA Premium 4 mobile app
himagiri19 said:
Hi,
I am trying to install rom for my note 2, My phone is completely formatted and it is looping in samsung galaxy Note 2 screen.
I have Philz working currently. I have downloaded many ROMS and GAPPS. i installed the PA rom and i tried to install the gapps, but the version of gapps was not in sync with PA rom.
I am also facing the problem of status 7 error while i try to install other ROMS. Please help me get a ROM and its corresponding GAPPS for my Galaxy Note2. I am very new to android world.
All this happened because i tried to root my phone.
Regards
Himagiri
Click to expand...
Click to collapse
Just flash latest CM11 or PA and then flash one of these
http://forum.xda-developers.com/showthread.php?t=2397942.
Flash PA
Boot device go though setup etc
Flash Gapps
Wipe dalvik/cache
Reboot
So, I recently installed PhilZ Touch 5. I wanted Android 4.4.x. Official flash from 4pda installed ok, but wifi module hasn't worked yet. I decided to install custom ROM. I installed Omega v31, but after that it doesn't boot, just walking bootloader. Another custom ROMs gives me "error 7 abort installation" when installing. How can I make Omega work? Please help.