Develop Bugs

[Q] cant boot help n7100

right ima cut to the chase
i used to use cyanogen mod 10 but wanted a official rom from sam mobile so i flashed via odin and cocked up my note 2 n7100
now i can get into recovery and download mode and i have flashed the same cm10 via tw recovery and it hangs on boot animation
i then wiped and flashed via recovery SSHD rom and it also hangs at boot animation so what do you guys think is wrong?
i need this fixed it cost way too much to just thow in the junk draw espcially since i cant work anymore.
thanks
-FatBoyNate

When you change your rom you need to wipe data from recovery.

FatBoyNate said:
right ima cut to the chase
i used to use cyanogen mod 10 but wanted a official rom from sam mobile so i flashed via odin and cocked up my note 2 n7100
now i can get into recovery and download mode and i have flashed the same cm10 via tw recovery and it hangs on boot animation
i then wiped and flashed via recovery SSHD rom and it also hangs at boot animation so what do you guys think is wrong?
i need this fixed it cost way too much to just thow in the junk draw espcially since i cant work anymore.
thanks
-FatBoyNate
Click to expand...
Click to collapse
Always flash custom rom through custom recoverys only (not from stock rom). Flash TWRP or CWR or Philz recovery first and then flash custom rom.
After flashing custom rom or stock rom, first wipe data and cache (as above said) before rebooting.
sent from my GT-N7100. Press thanks if I helped..

MBariya said:
Always flash custom rom through custom recoverys only (not from stock rom). Flash TWRP or CWR or Philz recovery first and then flash custom rom.
After flashing custom rom or stock rom, first wipe data and cache (as above said) before rebooting.
sent from my GT-N7100. Press thanks if I helped..
Click to expand...
Click to collapse
i have flashed a custom rom through a custom recovery, i've been flashing custom roms since the htc himalaya and never had a booting problem.
i think i snuffed the bootloader can anyone give a me a stock nandroid?
OR
guide me as how to get past the 2nd boot logo, i also flashed a core 2 kernel and that's when i think the damage was done, if it will fix this, where can i get the stock kernel?
[EDIT] atm it has SSHD ROM and The SSHD Kernel i get the samsung n7100 logo and then the boot animation but then it gets stuck.

FatBoyNate said:
i have flashed a custom rom through a custom recovery, i've been flashing custom roms since the htc himalaya and never had a booting problem.
i think i snuffed the bootloader can anyone give a me a stock nandroid?
OR
guide me as how to get past the 2nd boot logo, i also flashed a core 2 kernel and that's when i think the damage was done, if it will fix this, where can i get the stock kernel?
[EDIT] atm it has SSHD ROM and The SSHD Kernel i get the samsung n7100 logo and then the boot animation but then it gets stuck.
Click to expand...
Click to collapse
same has happened to me.

FatBoyNate said:
i have flashed a custom rom through a custom recovery, i've been flashing custom roms since the htc himalaya and never had a booting problem.
i think i snuffed the bootloader can anyone give a me a stock nandroid?
OR
guide me as how to get past the 2nd boot logo, i also flashed a core 2 kernel and that's when i think the damage was done, if it will fix this, where can i get the stock kernel?
[EDIT] atm it has SSHD ROM and The SSHD Kernel i get the samsung n7100 logo and then the boot animation but then it gets stuck.
Click to expand...
Click to collapse
ItzMar said:
same has happened to me.
Click to expand...
Click to collapse
get into recovery flash this file http://d-h.st/fWr u will loose evrything from internal memory, now after it reboot to recovery just flash your rom but dont reboot after installation.
first click fix permission
then wipe cache and dalvik atleast twice
then reboot!
it should load the rom fine, and i would suggest to stay with philz recovery and create a backup of efs and rom both the terminal way and through recovery too

shhbz said:
get into recovery flash this file http://d-h.st/fWr u will loose evrything from internal memory, now after it reboot to recovery just flash your rom but dont reboot after installation.
first click fix permission
then wipe cache and dalvik atleast twice
then reboot!
it should load the rom fine, and i would suggest to stay with philz recovery and create a backup of efs and rom both the terminal way and through recovery too
Click to expand...
Click to collapse
once i flashed it i gete:error opening 'data/dontpanic'
e:error I/O error
it didnt reboot. do i click reboot system after flashing your file?

ItzMar said:
once i flashed it i gete:error opening 'data/dontpanic'
e:error I/O error
it didnt reboot. do i click reboot system after flashing your file?
Click to expand...
Click to collapse
I hope u are rooted and have a custom recovery installed if yes then its a script to clean wipe the rom to start a fresh install better known as dirty flash so when u flash the zip it will wipe ur cache, dalvik, system on recover and will automatically reboot to recovery then u can proceed wth any custom rom u want the latest philz recovery is recommended.i am using my phn yo reply and already 4am morning here so be sure what you are doing , give complete info of ur phn status as wht u hv done till now if u have all as mentioned abv then u r good to go and flash, but in ur case the flash of the file was not successful so u can manually wipe all mentined above and procced as instructed.
Its an instruction for custom rom and recovery if u have stock then just wipe cache and dalvik and try booting up.
Off to sleep
If you are unsure of what u r doing then try to get hands on odin and flash stock rom ,as messing up to much may damage ur pit partition

shhbz said:
I hope u are rooted and have a custom recovery installed if yes then its a script to clean wipe the rom to start a fresh install better known as dirty flash so when u flash the zip it will wipe ur cache, dalvik, system on recover and will automatically reboot to recovery then u can proceed wth any custom rom u want the latest philz recovery is recommended.i am using my phn yo reply and already 4am morning here so be sure what you are doing , give complete info of ur phn status as wht u hv done till now if u have all as mentioned abv then u r good to go and flash, but in ur case the flash of the file was not successful so u can manually wipe all mentined above and procced as instructed.
Its an instruction for custom rom and recovery if u have stock then just wipe cache and dalvik and try booting up.
Off to sleep
If you are unsure of what u r doing then try to get hands on odin and flash stock rom ,as messing up to much may damage ur pit partition
Click to expand...
Click to collapse
:angel:Saviour!:angel:
Thank you so much. All is well now. :highfive:

[Q] Stuck in AT&T logo screen after TWRP nandroid restore

I rooted my AT&T GS3 after 4.3 OTA update with method #2 here http://forum.xda-developers.com/showthread.php?t=2538991
Then I made a TWRP Nandroid backup with Online Nandroid Backup app downloaded from play store. I immediately restored with that backup from TWRP because I would like to verify if the backup process working or not.
The phone did not boot up but stuck in AT&T logo screen for >20 mins. Wiping cache+dalvik didn't help. Factory reset didn't help.
I've already searched the forum. It looks like there is a similar thread there, but not exactly same as mine.
http://forum.xda-developers.com/showthread.php?t=2555120&highlight=nandroid
Is there any way I can get to rooted stock 4.3? If not, what are other options?

Finally I was able to come back with the following steps.
1. Download a "almost official stock rom" from http://forum.xda-developers.com/showpost.php?p=47816011&postcount=18
2. Put the rom in SD card.
3. Boot into TWRP recovery.
4. Wipe->Format Data->Yes
5. Wide->Swipe to Factory Reset
6. Wide->Advanced Wipe->Check Dalvik Cache and Cache->Swipe to Wipe
7. Install->external_sd->AT&T_I747UCEMJB.zip
8. Reboot and enjoy
UPDATE:
Actually this only works for the first boot up. As soon as I boot into OS and reboot, it won't boot in OS anymore. The device was stuck at Samsung Galaxy logo, even not went far to AT&T logo. I guess I'll try another ROM.

JEdad26 said:
Finally I was able to come back with the following steps.
1. Download a "almost official stock rom" from http://forum.xda-developers.com/showpost.php?p=47816011&postcount=18
2. Put the rom in SD card.
3. Boot into TWRP recovery.
4. Wipe->Format Data->Yes
5. Wide->Swipe to Factory Reset
6. Wide->Advanced Wipe->Check Dalvik Cache and Cache->Swipe to Wipe
7. Install->external_sd->AT&T_I747UCEMJB.zip
8. Reboot and enjoy
Click to expand...
Click to collapse
Hi,
Your solution worked for my problem listed here http://forum.xda-developers.com/showthread.php?t=2581349.
Thanks.

JEdad26 said:
Finally I was able to come back with the following steps.
1. Download a "almost official stock rom" from http://forum.xda-developers.com/showpost.php?p=47816011&postcount=18
2. Put the rom in SD card.
3. Boot into TWRP recovery.
4. Wipe->Format Data->Yes
5. Wide->Swipe to Factory Reset
6. Wide->Advanced Wipe->Check Dalvik Cache and Cache->Swipe to Wipe
7. Install->external_sd->AT&T_I747UCEMJB.zip
8. Reboot and enjoy
UPDATE:
Actually this only works for the first boot up. As soon as I boot into OS and reboot, it won't boot in OS anymore. The device was stuck at Samsung Galaxy logo, even not went far to AT&T logo. I guess I'll try another ROM.
Click to expand...
Click to collapse
This link not working for me. I flash with twrp and write... OS no installed.. do u want reboot.?
Hmm..
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

androidBH said:
This link not working for me. I flash with twrp and write... OS no installed.. do u want reboot.?
Hmm..
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
The link is still working for me, but I wouldn't suggest you trying that because it can boot up only once for me.
I tried all the ROMs posted here http://forum.xda-developers.com/showthread.php?t=2540998
Most of them can boot up into the OS *only once*. As soon as you reboot the device, you'll be stuck in Samsung Galaxy S3 logo. If you wipe data, it'll go further to AT&T logo, but just not the OS home screen.
I ended up with installing SlimBean by following the instruction here
http://forum.xda-developers.com/showthread.php?t=2539313
I really love it because of its performance and it's highly customizable.

UPDATE: Since I followed http://forum.xda-developers.com/showthread.php?t=2539313 to installed the Slimbean, so my TWRP was upgraded from 2.6.3.0 to 2.6.3.1.
With TWRP 2.6.3.1, I was able to flash the "rooted stock rom" posted by loserskater here http://forum.xda-developers.com/showpost.php?p=47816011&postcount=18. The "no-reboot" problem is solved.

Not able to flash ROM anymore in Samasung Note 2 (N7100))

Hi,
I had rooted my samsung galaxy note 2 a year ago. Till then I successfully flashed many ROMs. However recently when I tried to install DN3 (Ditto Note 3) ROM, when it rebooted my phone stuck on the "Samsung Note GT-n7100" logo and could not move further. It was "soft" bricked. I installed Philz recovery through ODIN and able to restore my data. After then I tried 2-3 times to install the same ROM but every time the installation failed in between.
At last I tried to install Phoenix touchwiz ROM but my phone got hanged again in between during installation. It seems there is some problem in my internal memory card which comes in between during installation.
Do I need to format my internal memory? Please let me know the probable causes of this issue.
Just wanted to tell you that all the time I wiped cache + Wipe Cache partition + Wipe Delvik Cache before commencing installation.
your comments would be greatly appreciated!

Are you sure you have correct recovery? Phils v6 is incompatible with Aroma installers, you should use v5.15

Earlier I used "ROM Manager" to install the ROM but when it hanged then I used Philz 6.0. Should I use Ver. 5 for the same?

KailashBisht said:
Earlier I used "ROM Manager" to install the ROM but when it hanged then I used Philz 6.0. Should I use Ver. 5 for the same?
Click to expand...
Click to collapse
If you are installing ROMs from recovery and those ROMs have AROMA installer you should use Phils 5.15. Version 6.x hangs on Aroma.

dalanik said:
If you are installing ROMs from recovery and those ROMs have AROMA installer you should use Phils 5.15. Version 6.x hangs on Aroma.
Click to expand...
Click to collapse
Hi,
used the attached file and flash using Odin. its philz_touch_5.15.0-n7100.tar.md5
good luck buddy.

Stuck in CWM / Crash on every Rom installations

Hi everyone
Sorry in case of repost.
I have a P5210 (Samsung Tab 3 Wifi). Once rooted everything was allright until I entered in recovery mode from the Rom Toolbox app.
I'm now stuck in a recovery loop mode and can't get out (CWM v6.0.4.7)
I've tried everything from factory reset / cache and dalvik cache wipe, to "fix" zips and so on. But nothing changes.
I've tried to reinstall CWM by putting a recovery image into a script and flash it through CWM. Seems to be done correctly, but when I reboot, it's still the same CWM (no update)
Eventually, i've tried to install some custom ROMs to start fresh : Every installation crashes at "WRITING SYSTEM PARTITION". I get black screen and a reboot.
And I've tried every custom Rom compatible with P5210.
Can you help me to get back to a clean configuration ?
N.

nicobee75 said:
Hi everyone
Sorry in case of repost.
I have a P5210 (Samsung Tab 3 Wifi). Once rooted everything was allright until I entered in recovery mode from the Rom Toolbox app.
I'm now stuck in a recovery loop mode and can't get out (CWM v6.0.4.7)
I've tried everything from factory reset / cache and dalvik cache wipe, to "fix" zips and so on. But nothing changes.
I've tried to reinstall CWM by putting a recovery image into a script and flash it through CWM. Seems to be done correctly, but when I reboot, it's still the same CWM (no update)
Eventually, i've tried to install some custom ROMs to start fresh : Every installation crashes at "WRITING SYSTEM PARTITION". I get black screen and a reboot.
And I've tried every custom Rom compatible with P5210.
Can you help me to get back to a clean configuration ?
N.
Click to expand...
Click to collapse
Hi
It seems you were on kitkat rom which may have updated your bootloader to kitkat version. The CWM needs to be updated to work well with kitkat. I had similar problem with my SM-T210, and solved the problem after updating CWM as per this post for T210:
http://forum.xda-developers.com/showthread.php?t=2433853
Your tab is different from mine so i think you need a fresh stock rom install using odin, then find an updated CWM for your tab.

Constant loop in recovery when installing ROM

Hi. I've installed in the past the Rocket Tab ROM.
Now I've made a full wipe, to install a new rom. I have the PhilZ recovery.
I can install the rom without a problem. But when I reboot the tab, it enters in the recovery mode again, and not in the new rom. I've tried many roms but no one works. It loads the recovery again and again.
Anyone knows what the problem is? I need the tab so much to read my books

Dulop said:
Hi. I've installed in the past the Rocket Tab ROM.
Now I've made a full wipe, to install a new rom. I have the PhilZ recovery.
I can install the rom without a problem. But when I reboot the tab, it enters in the recovery mode again, and not in the new rom. I've tried many roms but no one works. It loads the recovery again and again.
Anyone knows what the problem is? I need the tab so much to read my books
Click to expand...
Click to collapse
Try to reflash the recovery through the recovery, reboot recovery, wipe system and install Rom again. This should work but no guarantees.