I have a desire hd which was previously at Android 2.3 Sense 2.1. I used AAHK2 fastboot mode to install custom unlocked hboot. After custom hboot was installed, I downloaded the official update for Sense 3.0 Android 2.3.5. The update downloaded and booted into recovery and it stuck on the recovery. After some time, the stuck still remained so I removed the battery and tried to reboot into bootloader but instead of bootloader, the same recovery opens which is stuck. Please help sorry for my bad english.
Bootloader not opening nor phone showing any response when I connect it to PC in semi-recovery state.
can you more cleared explained what do you mean by "semi recovery state"?
is the phone still can turn it on..?
what happen while you tried pressing and holding vol down+power button...?
JJeamy said:
can you more cleared explained what do you mean by "semi recovery state"?
is the phone still can turn it on..?
what happen while you tried pressing and holding vol down+power button...?
Click to expand...
Click to collapse
Thanks for your reply, I have attached the screenshot to show you what I mean by semi-recovery state. When I tried pressing the Vol Dn + Power button, the screenshot I attached appears. Also, I wanted to tell you that before applying the official update, I used AAHK 2 to attain S-OFF and SuperCID on my device :'(
coolyahya said:
Thanks for your reply, I have attached the screenshot to show you what I mean by semi-recovery state. When I tried pressing the Vol Dn + Power button, the screenshot I attached appears. Also, I wanted to tell you that before applying the official update, I used AAHK 2 to attain S-OFF and SuperCID on my device :'(
Click to expand...
Click to collapse
you shouldn't be flashing official again after gaining s-off with AAHK2 script...
did the green bar off flashing process that you already say is semi recovery..did you ever tried waiting that bar until finish..?, or is just stuck in the half process like in your screen shot..?
if the process bar is not ever finish..just tried removed your battery..then removed your sdcard too..then put it in back again just your battery (leave the sdcard out)..then try it to booting your phone to the bootloder with pressing and hold vol down+power again..just let me know what happen..?
JJeamy said:
you shouldn't be flashing official again after gaining s-off with AAHK2 script...
did the green bar off flashing process that you already say is semi recovery..did you ever tried waiting that bar until finish..?, or is just stuck in the half process like in your screen shot..?
if the process bar is not ever finish..just tried removed your battery..then removed your sdcard too..then put it in back again just your battery (leave the sdcard out)..then try it to booting your phone to the bootloder with pressing and hold vol down+power again..just let me know what happen..?
Click to expand...
Click to collapse
The green loading bar always stucks when I power on the phone (left for almost 1 hour), and the same semi-recovery state opens after I removed sd card and battery and pressed the Vol Dn+Power
coolyahya said:
The green loading bar always stucks when I power on the phone (left for almost 1 hour), and the same semi-recovery state opens after I removed sd card and battery and pressed the Vol Dn+Power
Click to expand...
Click to collapse
did you already tried connecting your phone to pc..while the phone is in that position..?, did the computer detected your phone..i mean is it adb or fastboot command work while in there..?
JJeamy said:
did you already tried connecting your phone to pc..while the phone is in that position..?, did the computer detected your phone..i mean is it adb or fastboot command work while in there..?
Click to expand...
Click to collapse
Yeah also tried that :'( . Computer not giving response. Also if I press vol Up + power, a red led blinks, if I press Vol Up+Vol Dn + Power button, a stable yellow LED lights up and if I connect my cell to the PC in such state, a Qualcomm CDMA notification pops up in my PC as "driver not found'
coolyahya said:
Yeah also tried that :'( . Computer not giving response. Also if I press vol Up + power, a red led blinks, if I press Vol Up+Vol Dn + Power button, a stable yellow LED lights up and if I connect my cell to the PC in such state, a Qualcomm CDMA notification pops up in my PC as "driver not found'
Click to expand...
Click to collapse
did you already tried removed the battery in some of hours..maybe?, what happen after that if tried press and hold vol down+power again..?
if still can't go to bootloader..i think there's no way to fix your back to normal again...unless you brought it to the service center to do flashing of emmc chip from the beginning again..
sorry i can't help you more than this..
JJeamy said:
did you already tried removed the battery in some of hours..maybe?, what happen after that if tried press and hold vol down+power again..?
if still can't go to bootloader..i think there's no way to fix your back to normal again...unless you brought it to the service center to do flashing of emmc chip from the beginning again..
sorry i can't help you more than this..
Click to expand...
Click to collapse
Yeah I think I have to give my phone for flashing in local mobile market as the HTC service centres aren't available in my country, Anyways, thank you very much for your support
Related
I found an Incredible on the ground...yeah on the ground...I charged it up and powered it on but it stayed at the white boot screen...I tried to do a master reset and got the same results...the next time that I did the vol down + power I noticed some green lettering saying checking sd...then it said no image...I don't think it has a custom rom but it could(I found the phone) I also noticed that it said S-on at the top of the screen...Someone please help...
dautmost said:
I found an Incredible on the ground...yeah on the ground...I charged it up and powered it on but it stayed at the white boot screen...I tried to do a master reset and got the same results...the next time that I did the vol down + power I noticed some green lettering saying checking sd...then it said no image...I don't think it has a custom rom but it could(I found the phone) I also noticed that it said S-on at the top of the screen...Someone please help...
Click to expand...
Click to collapse
Try doing an ruu thru hboot. Download this file http://dinc.does-it.net/Stock_Images/4.06.605.3/PB31IMG.zip, and place it on the sdcard in no folders. Then boot to hboot ( vol down + power ). It should find the file and prompt you to press vol up to update. If all goes well it will prompt to press vol up to reboot, and then boot up normally.
Hey guys
i tried to get in fastboot mode by holding volume down+power.
it didn't work so i tried it with volume up+power. then it vibrates more intensely and the hboot logo flashes for a second and then it turns off.
i cant even boot the phone right now as it just boots in to hboot logo and then it turns off. i tried also to get in fastboot but in shows up for 2 seconds and then it shuts off.
my bootloader is locked and im on stock
please help me
many thanks in advance
Check if fast-boot in settings is disabled or not. If not, disable it. Then try vol down plus power button.
Does adb detect your phone? Alternatively, you can also do : adb reboot bootloader
Edit : My bad. Saw that you can't boot.
See that your phone is charged and then try vol down trick.
hey
just got it replaced at the store. But thanks for the reply +1
Hello Guys
Few days back i tried to root my phone with AAHK everything was going well thn suddenly my adb connection got terminated whn i tried to boot my phone it got stuck on white screen with htc logo i tried to run the AAHK Again but its not finding my device i cant even get into hboot or fastboot because my volume keys are not working now my question is there anyway i can get my adb drivers working so tht my pc recognises my phone and i can boot into bootloader by andriod control. thnx in advance
If you pull the battery out and put it back in, can you get into recovery with the power button and volume down key?
Grant Barker said:
If you pull the battery out and put it back in, can you get into recovery with the power button and volume down key?
Click to expand...
Click to collapse
did that may be ten times but same result not able to boot into bootloader my phone is not recognised even by my computer please help
I think you should do it faster,
Pull the battery out and press power button
insert the battery in and press volume down
I think the problem is the device start on after you pull back the battery ..!
Insert the battery, than press volume down and after that, press the power button (keep holding the volume down button!).
Than it should work.
Von meinem iPad gesendet via Tapabumps Hochauflösend
Hello
I was updating from a M version to another M verions. But I had to use the temporary recovery method.
This is what I was doing but didn't finish properly
Requirements:
1. Unlocked bootloader
2. TWRP for Z00A (Download | How to Install TWRP)
Unlock Bootloader on Android 6.0 Marshmallow ZenFone 2 ZE551ML/ZE550ML
Download tool (Download Here)
1. Extract it and connect Zenfone 2 with laptop/pc
2. Click unlock.bat will automatically detect whether the adb or fastboot mode, and then reboot into bootloader
3. Will appear on the screen to unlock the success of mobile phones after five seconds will reboot, then hold volume up the phone automatically re-boot back to bootloader.
4. If you missed the previous step, press the power button for 10 seconds off, then press the "Volume Up" and hold the power button to boot into bootloader.
5. After the phone has successfully re-enter the bootloader, click restore.bat on the computer, where the restore refers to the restore Android ifwi 6.0 otherwise Android phone can not enter the system.
6. The phone will reboot and restore white on black ASUS logo screen, and then enter the Android system.
Click to expand...
Click to collapse
I extracted and connect my zen2
Ran the unlock.bat
The phone entered the bootloader, flash his things and boot again but on the white screen
Then I had to hold power button 10s to turn it off and turn it on again
Entered the bootloadr by holding Power+Vol UP then to recovery.
At this time I just used the recovery as I usualy do, Wipe everything, cache, data, etc.
Connect to the PC, put the new UL-Z00A-WW-4.21.40.184-user.zip there and flash.
BUT now that comes the problem. I select the option to boot it after finish flashing.
So obviously I didnt finish the steps mentioned on the quote above.
I didnt ran the restore.bat before reboot into system and now All I see is black screen.
I've tryed some steps of those tutorials for briked phones but My computer can't see the device for long enough
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
I try to do those steps but I'm stuck on this part
now back to the Zenfone 2, hold power for 20 seconds to shutdown, then press simultaneously the key "power" + "volume down", until phone vibrates. Or computer makes detection sound, wait a few seconds it will add an item immediately below intelSoC in device manager “MOOREFIELD” new devices is successful.
Click to expand...
Click to collapse
My phone doesn't boot even on bootloader. It just vibrate twice and then nothing happens.
On my device manager I can see the "Moorefield" but only for a brief moment. when I try to turn on the phone then it immediately disapears and repeat this process (Vibrate twice, long preiod doing nothing and still black screen, then vibrates again twice, repeat)
Any suggestion?
Thanks in advice
Seikushim said:
Hello
I was updating from a M version to another M verions. But I had to use the temporary recovery method.
This is what I was doing but didn't finish properly
I extracted and connect my zen2
Ran the unlock.bat
The phone entered the bootloader, flash his things and boot again but on the white screen
Then I had to hold power button 10s to turn it off and turn it on again
Entered the bootloadr by holding Power+Vol UP then to recovery.
At this time I just used the recovery as I usualy do, Wipe everything, cache, data, etc.
Connect to the PC, put the new UL-Z00A-WW-4.21.40.184-user.zip there and flash.
BUT now that comes the problem. I select the option to boot it after finish flashing.
So obviously I didnt finish the steps mentioned on the quote above.
I didnt ran the restore.bat before reboot into system and now All I see is black screen.
I've tryed some steps of those tutorials for briked phones but My computer can't see the device for long enough
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
I try to do those steps but I'm stuck on this part
My phone doesn't boot even on bootloader. It just vibrate twice and then nothing happens.
On my device manager I can see the "Moorefield" but only for a brief moment. when I try to turn on the phone then it immediately disapears and repeat this process (Vibrate twice, long preiod doing nothing and still black screen, then vibrates again twice, repeat)
Any suggestion?
Thanks in advice
Click to expand...
Click to collapse
you must post question in the thread you are trying instead of making new one. any ways. long press power button to shut down the device completely. then press power button and volume down button. as phone vibrates release power button but keep holding volume down button and wait till moorefield appears in device manager. now release the volume button then click begin download in xfstk.
if u have further question post in in above thread you are following to unbrick
sukhwant717 said:
you must post question in the thread you are trying instead of making new one. any ways. long press power button to shut down the device completely. then press power button and volume down button. as phone vibrates release power button but keep holding volume down button and wait till moorefield appears in device manager. now release the volume button then click begin download in xfstk.
if u have further question post in in above thread you are following to unbrick
Click to expand...
Click to collapse
I did it already and only shows up for a brief moment like I said and then disappears a second before the phone vibrate
help please D:
Seikushim said:
help please D:
Click to expand...
Click to collapse
any luck fixing? i got the same result, no screen or anything, two vibrations since yesterday
Sadly, no.
no fix for me yet...
Let me know if you find something
You have tô unbrick your phone. There are some tutorials in the forum
I am using the Z008D variant of the Zenfone 2.
I had bricked my phone 3 times and the guides that had helped me are:
https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
https://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
I too had the same problem the first time I unbricked my phone. The moorefield device would show up briefly in device manager. It is stated in the guide that you had to press power+vol down when connecting the phone to use xFSTK. I googled and found that you had to actually press and hold the vol down button only and then connect the USB cable, then release it when the moorefield device is detected.
My ADB is On in settings and I can use ADB normal. But when my Phone is off I can't turn it on anymore the only way would be with ADB command: ADB reboot devices!
Power button + Volume UP/DOWN isn't working anymore...
The thing is, when connecting my Phone to my PC after it gets off it will show the charging animation. And when my phone reached 100% it stays in the animation and doesn't boot up. ADB isnt working in that state.
How can I boot my phone?? Pls I hope someone can help me PLS PLS
You must try conclude pins on motherboard for button volume up when you connecting USB cable, after that fastboot was started and you can type fastboot reboot command on pc.
my volume up button broken and i need that to flash stock rom again as phone in bootloop and cant access recovery,phone boots and shows logo for 1 sec and reboots again any ideas plz i flashed the oneos rom
ireaper4592 said:
my volume up button broken and i need that to flash stock rom again as phone in bootloop and cant access recovery,phone boots and shows logo for 1 sec and reboots again any ideas plz i flashed the oneos rom
Click to expand...
Click to collapse
If you have power and volume-down buttons functioning, boot the phone with the power button and when the bootloader unlocked warning comes up, press the volume-down button and you will get the options for restart, fastboot, recovery etc. Simply choose what you want with the volume-down button and confirm with the power button.
tnsmani said:
If you have power and volume-down buttons functioning, boot the phone with the power button and when the bootloader unlocked warning comes up, press the volume-down button and you will get the options for restart, fastboot, recovery etc. Simply choose what you want with the volume-down button and confirm with the power button.
Click to expand...
Click to collapse
yes got that problem is i need volume up button to work so i can put in adb mode so i can flash stock rom,i decrypted my devices then installed the oneos rom and thats when i lost access to recovery and goot into bootloop?