I've been running a rooted pm-600 with clean rom for a week now. I decided to try the new megablast rom and after carefully following install instructions (all wiping done and zip install via twrp2.6.3.3.) I was stuck at the Samsung screen in the boot mode. After giving it some time and not getting past the Samsung screen, I tried restarting and the same thing happened. I used was able to go to download mode and used odin on my pc to flash back the stock rom, but I am still stuck at the Samsung screen. I get the galaxy note 10.1 2014 splash screen, the start up music, blue circle, but then it just hangs at 'samsung'. I have tried restoring stock twice now with the same results. Any ideas :crying:
tmord1 said:
I've been running a rooted pm-600 with clean rom for a week now. I decided to try the new megablast rom and after carefully following install instructions (all wiping done and zip install via twrp2.6.3.3.) I was stuck at the Samsung screen in the boot mode. After giving it some time and not getting past the Samsung screen, I tried restarting and the same thing happened. I used was able to go to download mode and used odin on my pc to flash back the stock rom, but I am still stuck at the Samsung screen. I get the galaxy note 10.1 2014 splash screen, the start up music, blue circle, but then it just hangs at 'samsung'. I have tried restoring stock twice now with the same results. Any ideas :crying:
Click to expand...
Click to collapse
The only avialable option for you now is getting into stock recovery, wiping data , cache & dalvik., you will loose your data on your internal card, but no other choices.
Thanks for the advice. I discovered that this was in part triggered/or perhaps caused by the failure of a brand new Samsung micro sdxc card. Very frustrating, had just gotten it the day before and all my recent nandroid backups were on it Appreciate the help
Sent from my SM-P600 using xda app-developers app
Related
Hi Guys.
So i flashed a few roms lately. started with EmotionMiUi then CM10, Omega, Alliance and well a few more.
i did a full wipe and cleared all caches each times and only had a few minor problems with the different ROMS that i was able to fix.
So i now returned to MiUi and have had it running for about a week. Tried some DPi modding yesterday, and did notice that it took longer time to boot and boot into recovery. i flashed the Xpose DPi remover, and continued using my phone. i have rebooted about 3 times today. And the last reboot caused the phone to enter the eternal "Samsung Galaxy Note II - N7100" boot static "animation".
Now i have tried pulling the battery several times, tried booting into recovery and the only thing that will let me boot into anything is power + home + volume down.
i have obtained the official samsung firmware ROM for my phone.
is my way ahead to "just" flash it using Odin, and i will have my good times back ?
Maybe try to clear Data and Cache partitions first?
mat9v said:
Maybe try to clear Data and Cache partitions first?
Click to expand...
Click to collapse
Just to clear you're stuck at the start screen( the screen it shows Note 2 and model number)?
If so, then i have no clue
If your phone goes in a bootloop ( startscreen then samsung logo animation, blank screen, start screen, samsung logo animation...) I have faced this issue while flashing Stock ROMs and you can clear this by doing a factory reset though i have no clue whether this is the correct one for MIUI ROM.
prabukannappan said:
Just to clear you're stuck at the start screen( the screen it shows Note 2 and model number)?
If so, then i have no clue
If your phone goes in a bootloop ( startscreen then samsung logo animation, blank screen, start screen, samsung logo animation...) I have faced this issue while flashing Stock ROMs and you can clear this by doing a factory reset though i have no clue whether this is the correct one for MIUI ROM.
Click to expand...
Click to collapse
i was stuck at the very first startscreen that just stayed there. i had been messing around with some DPi and a lot of tweaks.
i used Odin from my PC to flash the official firmware, then i used Philz recovery to format and clean before flashing my MiUi V5 ROM.
ALL works great.
Hey guys. I was running Omega rom for a while, and today i decied i would flash 4.3 paranoid android on my n7100, but when i tried to flash, it kinda went bad, first time it booted with no problem but than i wanted to reboot it to insert SIM and i got stuck on Samsung Galaxy NOTE II N7100 White text screen. I tried wiping everything, reflashin PA and CM10.1 but i cant get past the white text.Not even Boot Animation starts. I can get to Recovery no problem and I even tried reflashing the recovery. It didnt help any.Should i try to flash stock rom via odin? What should i do? It just wont get past the white screen. I repeat, flashing various ROMs didnt change anything.
Still a bit of noob here - but here's what happened:
I was running clean bean 4.2, then I successfully installed the MK3 baseband w/o any problems. I found that the wifi was broken so I flashed the wifi fix from (http://forum.xda-developers.com/showthread.php?t=2541900).
Once that flashed ok my system tried to reboot and then proceeded to sit at the samsung loading screen. After 10+ mins I hard pulled the battery and was able to get into twrp and tried a restore backup from before any changes today. Once that finished it rebooted and is still sitting at s3 load screen.
Now when I try to get into recovery nothing happens.
Powering of and on remains sitting at the s3 load screen.
Any help would be appreciated.
Update: Ok not all hope is lost - I can get back into recovery, but restore while successful refuses to load past the s3 screen.
I'm a bit at loss now what to do - would factory resetting it do the trick?
Update 2: Tried a factory reset and still nothing - still sits at the s3 load screen.
Ok - I got a rom manually back on the sd card and reflashed a base rom.
Phone boots back into android. :good:
I have learned my lesson.
Yes, lesson is do not flash zips made for stock touchwiz when you are on AOSP, or vice versa.
Hi,
I recently tried installing the new 4.3 update onto my Samsung Galaxy S3 I747. Also, I never rooted my phone and my carrier is Telus if that matters.
When my phone finished updating, it lead to the lock screen. Just as I was about to enter my pin and unlock it, the phone restarts and gets stuck on the Samsung splash screen. I have tried entering into recovery mode and then wiping the cache and restarting it, but no luck.
I do not wish to restore my phone back to factory settings because I do not want to lose my music and apps. Is there a solution that can fix it without wiping the memory?
Thanks.
edit: i left it charging for a few minutes while it was stuck on the samsung splash screen, and then it went to the lockscreen and restarted it self
... i have to wait five minutes before i can save my edit
editedit: it just went to lockscreen for a second again
editeditedit: its going back to lockscreen quite often and restarting it self
aznpiggy said:
Hi,
I recently tried installing the new 4.3 update onto my Samsung Galaxy S3 I747. Also, I never rooted my phone and my carrier is Telus if that matters.
When my phone finished updating, it lead to the lock screen. Just as I was about to enter my pin and unlock it, the phone restarts and gets stuck on the Samsung splash screen. I have tried entering into recovery mode and then wiping the cache and restarting it, but no luck.
I do not wish to restore my phone back to factory settings because I do not want to lose my music and apps. Is there a solution that can fix it without wiping the memory?
Thanks.
edit: i left it charging for a few minutes while it was stuck on the samsung splash screen, and then it went to the lockscreen and restarted it self
... i have to wait five minutes before i can save my edit
editedit: it just went to lockscreen for a second again
editeditedit: its going back to lockscreen quite often and restarting it self
Click to expand...
Click to collapse
When you got it into recovery did you try to wipe data/factory reset??
But to be honest it sounds like your phone is soft bricked maybe. I'm experiencing the almost same problem with my AT&T sgh-i747. Mine is stuck at the Samsung Galaxy S III screen and doesn't go any further than that at all.
You will most likely have to do that same thing I am doing which is reflashing android 4.3 via odin. It may work for you, I'm pretty sure it'll work for mine. Head over here and read this thread and see if this can help if not let me know and we'll come up with somethin else to help you fix your phone. (If I'm correct following this thread and flashing via odin will not erase and of your data.)
Your only other real option is to install the 4.3 MJ2 leak via heimdall. http://forum.xda-developers.com/show....php?t=2496425
Heimdall will flash odin files. http://glassechidna.com.au/heimdall But odin will not flash heimdall files. It works much like odin flash in download mode so i'm told. I'm trying to figure it out now. I hope this helps.
I was never able to get the above Heimdall installed correctly on my pc. I am still stuck at the black and white galaxy s3 screen. I installed TWRP via odin to try my to run my nandroid i made earlier today and it says successful. But when I go to reboot It says No OS are you sure you want to reboot. I was already on 4.3.3 via the OTA update like you. And now i'm here turn phone on and it's going straight to download mode
Please HELP US BOTH Someone ANYONE
Hi guys, relatively new here.
To start of I wouldn't say that I'm a complete noob when it come to this sort of stuff but I'm at a bit of a loss here.
To sum up my issue real quick;
My Galaxy Tab 3 SM-t210r running 4.1.2 stock that I rooted a while back started acting strange. Google services begun to unexpectedly shut off or stop working and I was getting annoying os popups so I decided to install a new custom, debloated rom.
After a few quick google searched ended up downloading StockROM-Ultimate Edition for the t210r.
Launched into TWRP 2.8.0.0 recovery, did a wipe and installed said zip of rom.
Now the issue that arose here is that I can't seem to boot into the os at all. Upon restarting or powering off and on I am greeted with the Samsung Galaxy Tab 3 splash screen, it hangs there for about 10-20 seconds, reboots(screen goes black?) that same splash screen shows up and I'm booted back into TWRP.
After countless googles searches I decided to unroot and go back to stock FW.
I've found the correct 4.1.2 stock rom on sammobile. Opened up Odin 3.07 and flashed. Everything goes good, Odin says RESET, tablet reboots, same two Samsung Galaxy screens and I'm back into TWRP. Odin indicating PASS! after a few seconds in twrp. Whether I reset to factory setting in TWRP or not, after flash, I'm always ending up in TWRP with the os never booting.
tldr; stuck in TWRP boot loop after custom rom and even stock rom flash.
Any assistance would be great
-Dan