I'm using the E975 and I've unlocked the bootloader, installed CM11 on it.
However I realised that the ROM did not detect any signals. I couldn't make calls or SMS.
I had to manually go to the network settings and find the carrier (Singtel) to register everytime I start the phone.
I then flashed savvy 4 ROM to see if the network was any better. It was, but then I was limited to GSM only. I couldn't get 3G or 4G.
Before I unlocked the bootloader, I had 3G and 4G signals.
Then I decided to KDZ back to stock ROM. I had network but only limited to GSM.
I realised my phone could only detect GSM signals from Singtel, M1 and Starhub. I couldn't see 3G or 4G.
I don't know what to do now. I need help. Must I flash any basebands or modems or anything? Thanks
Related
I recently just got a plan on the Canadian cell service provider, WIND, on my Roger's phone. I unlocked it and make it able to use AWS bands, which is what WIND is on. The phone read WIND fine when I was getting the plan, but only a few hours later the signal died and now I'm getting "Your SIM does not allow a connection to the network".
I tried using ODIN and flashing back to stock 4.1.1, but that has not worked. I don't know what to do right now.
I also tried turning the radio on and off, and that has not worked.
I'm stumped. Can anybody help?
You have to reapply the AWS mod the moment you flash another modem.
My phone was was modded and has had SEVERAL different modems and never had to re apply the mod is a hardware firmware flash and should stick. You could try I suppose but it may b with all the ownership changes with carriers here they may have changed frequencies. Like Telus screwed 90% of Public mobile customers.
When I modded mine I went through QPST there is a thread in development.
Sent from my AWS enabled I317m ❤ Running DN3 v5.
AgentTran said:
I recently just got a plan on the Canadian cell service provider, WIND, on my Roger's phone. I unlocked it and make it able to use AWS bands, which is what WIND is on. The phone read WIND fine when I was getting the plan, but only a few hours later the signal died and now I'm getting "Your SIM does not allow a connection to the network".
I tried using ODIN and flashing back to stock 4.1.1, but that has not worked. I don't know what to do right now.
I also tried turning the radio on and off, and that has not worked.
I'm stumped. Can anybody help?
Click to expand...
Click to collapse
Blacklisted maybe?
Hey all. I'm currently running a D855V (Australian model) rooted on stock Android 4.4.2.
So I recently upgraded to Lollipop but couldn't use it fully due to issues with some other software of mine. So I used the KDZ method to flash back to 10E. Since then I've lost all 4G/LTE on my phone.
I've tried changing the networking mode inside the mobile network settings from GSM/WCDMA to GSM/WCDMA/LTE but once selected my entire mobile network will drop. From there it will regain network connectivity for about 10 seconds (minus any data connection) and then drop off again, showing no network. It will continue to do this until I change the network type back to GSM/WCDMA or reboot (which defaults the connectivity method back to GSM/WCDMA anyway). I tried flashing the 10C firmware too (for Australia) but this will do the exact same thing.
I've also tried changing the LTE RAT settings inside the hidden menu to GSM/WCDMA/LTE and it still won't connect. It will drop the network like the previous method but will then reconnect only with a HSDPA connection rather than 4G/LTE.
I've checked the SIM card in another phone and it works fine with 4G/LTE. I've also checked my IMEI and it shows that I do have one so I can rule that out. Right now I"m at a loss. I'm thinking I need to flash a new radio or baseband but I can't find any info about that from any of the other threads I've read.
Any info at this stage would be great as it sucks having the 2nd best 4G speeds in the world and not being able to use them.
Cheers all.
EDIT: Resolved it by flashing KK modem/baseband. Thanks to JDr0iD for the suggestion. Turns out the KK and LP basebands are done differently. Figures considering the massive overhaul they've done with it. Anyway the modem can be found here - https://mega.co.nz/#!61QBVS5B!pa2xdGyeWAJKyAazkz9O8qc5b9hJOpxX5kaU_aFdjq4
potplanty said:
Hey all. I'm currently running a D855V (Australian model) rooted on stock Android 4.4.2.
So I recently upgraded to Lollipop but couldn't use it fully due to issues with some other software of mine. So I used the KDZ method to flash back to 10E. Since then I've lost all 4G/LTE on my phone.
I've tried changing the networking mode inside the mobile network settings from GSM/WCDMA to GSM/WCDMA/LTE but once selected my entire mobile network will drop. From there it will regain network connectivity for about 10 seconds (minus any data connection) and then drop off again, showing no network. It will continue to do this until I change the network type back to GSM/WCDMA or reboot (which defaults the connectivity method back to GSM/WCDMA anyway). I tried flashing the 10C firmware too (for Australia) but this will do the exact same thing.
I've also tried changing the LTE RAT settings inside the hidden menu to GSM/WCDMA/LTE and it still won't connect. It will drop the network like the previous method but will then reconnect only with a HSDPA connection rather than 4G/LTE.
I've checked the SIM card in another phone and it works fine with 4G/LTE. I've also checked my IMEI and it shows that I do have one so I can rule that out. Right now I"m at a loss. I'm thinking I need to flash a new radio or baseband but I can't find any info about that from any of the other threads I've read.
Any info at this stage would be great as it sucks having the 2nd best 4G speeds in the world and not being able to use them.
Cheers all.
Click to expand...
Click to collapse
Hey mate. Do you think modem is still linked to lollipop? Try another modem or restore EFS to see if makes a difference
Sent from my LG-D855 using XDA Free mobile app
think it might be an lteconfig issue?
Please my G928T (unlocked) using internationaly, suddenly cannot no longer receive 3G network, can only reveive 2G/Edge. Once i set it to 3G only, the network will go and I will be off Network. But 3G use to work before now.
I have flashed the default most recent firmware (G28TUVU4DQC2) from sammobile yet it didn't work.
Pls I need help.
Thanks
Hi, I'm in the same situation, did you find a solution?
sunnycee said:
Please my G928T (unlocked) using internationaly, suddenly cannot no longer receive 3G network, can only reveive 2G/Edge. Once i set it to 3G only, the network will go and I will be off Network. But 3G use to work before now.
I have flashed the default most recent firmware (G28TUVU4DQC2) from sammobile yet it didn't work.
Pls I need help.
Thanks
Click to expand...
Click to collapse
Have you tried changing SIM Cards?
What about booting to recovery and performing a factory reset?
Ht c 10
Sprint
Unlocked
S-On
When i purchased this phone it was running Viper nougat rom with functional LTE
I updated to oreo firmware and lte gone. It would only show 3g where as i am in full lte coverage zone
I flashed different oreo and pie roms but fruitless
I tried to fix by erasing modemst1 and 2 but it always give error of 35 partition
Today i downgraded to Nougat and erase persist but it is still same
i can only get 3g no 4g or lte
I tried network reset by ##72786# but it eventually sim locked my phone and i had to unlock it manually
Any suggestion or possible fix
Thanks in advance
did you find the answer?
I have also lost connection. Except mine is both 3G and 4G. Oddly I can still call, text, use wifi and putting the sim in my other phone works just fine. I have no clue what's wrong. I've tried everything at this point.
Here's a link to my thread if you wish to follow any solutions provided if someone comments.
https://forum.xda-developers.com/htc-10/help/internet-connectivity-htc-10-please-help-t3946949
It had same situation but eventually I solved it. Now LTE is working. First of all, need to be S-OFF and then after unlocking SIM, you can install any firmware with any ROM that supports the encryption...Either US unlocked or UK International Roms will fix the LTE issue. One thing to notice: you must keep the data partition unformatted for keeping the SIM lock status and need to use SPRINT or VERIZON radio. I am using stock Oreo from with Verizon radio + Magisk.
In addition, I unlocked LTE bands as well with DFS Qualcomm tool
How can I improve my network quality,
As I saw 3g network of same carrier in my custom ROM and 4g network of same carrier in others standard phone?
Joybiswas19 said:
How can I improve my network quality,
As I saw 3g network of same carrier in my custom ROM and 4g network of same carrier in others standard phone?
Click to expand...
Click to collapse
(Take a Backup before doing anything)
First of all check check your base band version (Phone Settings-> Info)
if you are not on the latest version(2 different versions Chinese or Indian).
i not i would suggest you to download any version of your choice and then flash it.
once you are done with all of that. now comes the main part.
you have to now enable volte on the stock rom and try using it for 5- 10 mins and check if u get 4g network, else check you sim card to see if it is 3g or a 4g sim.
if a 3g sim, then just get the sim upgraded. (should consider doing this first). else you would have seen 4g network,thats all . follow all steps to root and unlock the bootloader.
Thats all any rom you would have 4g