[Q] Virgin Mobile S3 Jelly Bean 4.3 Clean Stock ROM - Sprint Samsung Galaxy S III

I tried rooting my Virgin Mobile SPH L710, running android 4.3. My firmware upgrade was interrupted somehow and asked to connect to Kies. I did not know what to do so I downloaded a ROM off of the internet and flashed it using Odin. It changed my service provider to Sprint and I have no Virgin Mobile stuff. I'm wondering if there is a way to either reset everything on my phone to Virgin Mobile or a clean stock ROM to flash. Thanks for all of your help.

The reason this is happening to you is because your phone doesn't have a build of cyanogenmood for it. I have The VM GS3 as well and it says the same thing. Basically the way VM works is it pays sprint to use their coverage. So when you install a sprint rom in your phone if doesn't mean that your phone won't work, it just means it's going to think VM is sprint.

Brooklynnn said:
I tried rooting my Virgin Mobile SPH L710, running android 4.3. My firmware upgrade was interrupted somehow and asked to connect to Kies. I did not know what to do so I downloaded a ROM off of the internet and flashed it using Odin. It changed my service provider to Sprint and I have no Virgin Mobile stuff. I'm wondering if there is a way to either reset everything on my phone to Virgin Mobile or a clean stock ROM to flash. Thanks for all of your help.
Click to expand...
Click to collapse
You can run Sprint ROMs only after changing some assert lines to show your baseband for Virgin Mobile.
sent from my GS3

Related

[Q] Need Virgin Mobile Stock Rom for GS2

I have the virgin mobile epic4g touch /gs2 and in an attempt to root it i accidentally installed a sprint rom onto the phone and have no backup. Now my phone looks like the sprint version. Most things still work but mms does not. This is the reason I am looking to install the original VM rom so if anyone could post a copy of theirs and explain how to install it I would greatly appreciate it!!

Galxy S4 - Not registering on Network

Hi, i've been using my S4 since May of this year.. It was originally bought in Canada (rogers) and I have been using it on Tmobile in Las Vegas since May... There were no problems until the other day. Out of now where it stopped working. It does not read sim. I went to the Tmobile store and got a replacement sim but still no luck. The sim works in another phone just fine...
Does anyone why it won't connect to the network? There was an update on my phone about a week ago and i did update it to the latest software.
Very frustrating. hope someone can help.
thanks
Sana2 said:
Did you root it ? Or you should uinstall some apps that have just installed
Click to expand...
Click to collapse
Im not sure how uninstalling apps will help. Lol
And no. Not rooted it.
Are you seeing the correct IMEI number in your phone or is it just showing bunch of zeros...?
Sent from my SGH-M919 using xda app-developers app
Could Odin the stock image.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Was it bought from the store or second hand? May be imei block
Sent from my SGH-T999 using xda app-developers app
imsosa said:
Hi, i've been using my S4 since May of this year.. It was originally bought in Canada (rogers) and I have been using it on Tmobile in Las Vegas since May... There were no problems until the other day. Out of now where it stopped working. It does not read sim. I went to the Tmobile store and got a replacement sim but still no luck. The sim works in another phone just fine...
Does anyone why it won't connect to the network? There was an update on my phone about a week ago and i did update it to the latest software.
Very frustrating. hope someone can help.
thanks
Click to expand...
Click to collapse
The update to 4.3 is the cause of your problems. Your phone is the I337M from Rogers which had the AWS bands enabled. Many people have reported losing their AWS with the update. If you are in an area where T-mobile has 1900Mhz connectivity then you should not be having a problem even with the update.
re: modem.bin
imsosa said:
Hi, i've been using my S4 since May of this year.. It was originally bought in Canada (rogers) and I have been using it on Tmobile in Las Vegas since May... There were no problems until the other day. Out of now where it stopped working. It does not read sim. I went to the Tmobile store and got a replacement sim but still no luck. The sim works in another phone just fine...
Does anyone why it won't connect to the network? There was an update on my phone about a week ago and i did update it to the latest software.
Very frustrating. hope someone can help.
thanks
Click to expand...
Click to collapse
NOTICE: If you are running/using any AOSP/AOKP/CM/GE/KitKat or any PORTED roms
then the following does NOT apply to you.!!!
Have you tried this:
You can Odin flash the MK2 modem.bin while on any Jellybean Touchwiz 4.2.2 based rom
or ODIN flash it after flashing the Infamous v9, Wicked v9.1, or any M919 MK2 JB based
Touchwiz 4.3 roms. Either way it makes no difference.
What does make a difference is to follow this step by step exactly.
#1: Manually power down the phone by using the power button only.
#2: Start ODIN and put the MODEM.BIN file into ODIN'S PHONE slot.
#3: Put the phone into download mode using the volume down and power button.
#4: Plug the USB cable into the phone and into the computer.
#5: Make sure that ODIN'S [COM:xx] lights up.
#6: Un-Check the Auto-Reboot in ODIN and click START.
#7: After its done flashing unplug the usb cable.
#8: Manually power off the phone by using the power button only.
#9: Wait 20 or so seconds before you power on the phone.
After doing this the MK2 baseband should show up in About Device.
Once it displays MK2 you can flash any MK2 JB TW 4.3 custom cwm/twrp zip file roms unless you have
already flashed it before flashing the modem.bin in which case you are done and ready to use the phone.
NOTE: this modem.bin is the official Tmobile M919 MDL radio which is meant to work anywhere in the USA.
Since none of these 4.2.2 & 4.3 custom zip file roms contain radios you are left with the Canadian modem
in your phone. That's why this step by step should work fine for you.
The only thing which may not work perfectly would be LTE because that's a separate radio (non-hlos.bin)
which must be copied from a MDL based Tmobile M919 Jellybean TW official 4.3 or 4.2.2 Odin flash TAR
firmware.
Here is the direct download link for the Tmobile 4.3 M919 MK2 modem.bin:
http://www.mediafire.com/download/1g...l89x/modem.bin
Good luck!

In need of stock sch-s960l rom.

looking for the sock roms for a tracfone version of the s3 (sch-s960l) i have tried to update in kies but it tells me my s/n is wrong and wont let me get any futher. it is running a rooted version of a sprints rom ics but no mobile network not text or phone calls. looking for stock the rom to get the phone working. any help is greatly appreciated.
Did you find one?
xsteve4578x said:
looking for the sock roms for a tracfone version of the s3 (sch-s960l) i have tried to update in kies but it tells me my s/n is wrong and wont let me get any futher. it is running a rooted version of a sprints rom ics but no mobile network not text or phone calls. looking for stock the rom to get the phone working. any help is greatly appreciated.
Click to expand...
Click to collapse
Did you find one, I had found one but the link no longer works and I don't know what happened to my copy of the stock rom (md5 and pit files)... please let me know

flashing a boost mobile with sprint stock rom

I have a boost mobile s3 and want to know weather its possible to flash it with a sprint s3 stock rom WITHOUT complications
the Baseband version is L710VPUBMK5
i have downloaded the sprint rom and want to confirm its safe before i go ahead
its fresh from box and not activated, all i want is to use the phone on another cdma network outside the USA
alemosman said:
I have a boost mobile s3 and want to know weather its possible to flash it with a sprint s3 stock rom WITHOUT complications
the Baseband version is L710VPUBMK5
i have downloaded the sprint rom and want to confirm its safe before i go ahead
its fresh from box and not activated, all i want is to use the phone on another cdma network outside the USA
Click to expand...
Click to collapse
Try HERE. I suggest you read 1st couple of pages. I think JDSingle's ROMS on that thread are stock and have been modified for you. Also you will need root and modified recovery from HERE. If your wanting to use phone on a different carrier, your gonna have to unlock phone, totally different than changing roms, but you wil still need to be rooted and have custom recovery that I linked above. Read HERE for unlocking. ALSO Im not 100% sure this method will work as thread is for unlocking the Sprint version. Ask in that thread.

[Q] Galaxy s3 Sph l710 No APN Settings

I'm helping my mom with her phone. She recently lost data connection. She called her provider and they said everything is working on her end.
So now I'm trying to help her.
She is on stock rom and running 4.4.2
There's no apn under her mobile networks! How can she find it?
Thanks for your help!
You could try to Odin the latest stock ROM if you have a PC available- http://forum.xda-developers.com/showthread.php?t=3007847

Categories

Resources