Related
ok i need help im going crazy i have a galaxy s3 at&t i unlocked it to work on different networks i have simple mobile now everything was working great unlocked but not rooted on stock rom then i decided to root it using odin 1.85v i did everything right it rooted my phone and then it said that it could connect to network so i said i probably need to flash a rom so i installed cm10 4.1.2 and now its not letting me call it says emergency calls only wifi everything else works wtf please help
You may need to enter your network information. Your rom may not be set up to enter that information automatically. Check your apn settings and make sure they are right for your network.
Found this:
http://forum.xda-developers.com/showthread.php?p=34173168
Sent from my SGH-I747 using Tapatalk 2
help fast galaxy s3 at&t
i tried to do that but when i press to save it nothing happens its empty
help fast galaxy s3 at&t
also my phone is at&t not tmobile
Flash a stock ROM back on it.
http://forum.xda-developers.com/showthread.php?t=1968625
And use Odin 3.07(the one we should be using), not 1.85.
Also, check to see if your imei number is correct (open a dialer, *#06#)
i have a bell galaxy note 2, after i flashed some custom ROM, my phone stop working, i have found similar problem on the sprint form, but doesn't know how to fix, please help.
Problem #1:
After flashing a ROM, the GN2 is unable to activate the radio/modem. The following read "Unknown" in the "About Phone" menu:
Baseband, Network, Mobile Network Type, MEID, IMEI, ICCID.....etc. Basically anything to do with the mobile network.
Problem #2:
When booted up and running, PC will not recognize the phone as usual (unable to copy files to phone).
i try odin a bell stock still doesn't work, and when i boot into recovery it keep saying is a RWC rogers phone, does that have something to do with the problem? i also try kies too, still no luck.
minghaoji said:
i have a bell galaxy note 2, after i flashed some custom ROM, my phone stop working, i have found similar problem on the sprint form, but doesn't know how to fix, please help.
Problem #1:
After flashing a ROM, the GN2 is unable to activate the radio/modem. The following read "Unknown" in the "About Phone" menu:
Baseband, Network, Mobile Network Type, MEID, IMEI, ICCID.....etc. Basically anything to do with the mobile network.
Problem #2:
When booted up and running, PC will not recognize the phone as usual (unable to copy files to phone).
i try odin a bell stock still doesn't work, and when i boot into recovery it keep saying is a RWC rogers phone, does that have something to do with the problem? i also try kies too, still no luck.
Click to expand...
Click to collapse
This has nothing to do with development.
However unless you have a backup. You'll need to return your phone for a new one.
antiochasylum said:
This has nothing to do with development.
However unless you have a backup. You'll need to return your phone for a new one.
Click to expand...
Click to collapse
sorry i posted wrong place, where can i get help, i am new to this, and how do i delete this post
Make sure you odin a rom that included the radio and kernel. Preferably a return to stock type thing. If that didn't work did you back up your efs partition?
Also what did you flash exactly?
OP please read the Forum Rules on posting in the correct Section, Moved & Thank You
I had same situation as you few days ago, I messed up my Rogers note ii with flashed 7100 rom to my i317m. I lost baseband, network imei. Luckily, after I flashed root injected FACTORY Stock rom to my rogers phone, the problem had been fixed, here is the link where you can download the root injected FACTORY Stock rom for you phone. Hopefully, you will get your phone fixed
http://forum.xda-developers.com/showthread.php?t=2004650
jjzeng said:
I had same situation as you few days ago, I messed up my Rogers note ii with flashed 7100 rom to my i317m. I lost baseband, network imei. Luckily, after I flashed root injected FACTORY Stock rom to my rogers phone, the problem had been fixed, here is the link where you can download the root injected FACTORY Stock rom for you phone. Hopefully, you will get your phone fixed
http://forum.xda-developers.com/showthread.php?t=2004650
Click to expand...
Click to collapse
Yeah i flashed this one no lucks, i think my parition is messed up, wonder if anyone has a back up efs file for my phone
Aridon said:
Make sure you odin a rom that included the radio and kernel. Preferably a return to stock type thing. If that didn't work did you back up your efs partition?
Also what did you flash exactly?
Click to expand...
Click to collapse
i flashed a rogers rooted stock version rom on my phone, so now after i did recovery it just keep on shows is a RWC in the recovery mode doesn't matter which stock rom i flash, and its saying a BMC in the download more product name. so its really messed up. because i unlocked the phone from bell, so the guy at bell told me i void the warranty on it. now i don't know what i can do to fix my phone.
Pit CSC file
any idea where i can find a pit file for my bell note 2 so i can repartion it, or that's something only samsung has it
This was a big issue with the gs3 and they've come up with a solution in that thread so given the similarities I would think that would work with some tweaking for the different partitions on the note 2. Check out the gs3 forum & maybe get in touch.. they might be able to help.
Sent from my SGS3 using my finger
Hey guys.. I'm new to this forum and to flashing ROMs and all that so I need your help..
I used the search option and didn't find a clear answer to this..
I have bought about a month ago an at&t SGS3 SGH-i747 and I am not very happy with the current OS (android 4.1.1 at&t stock ROM) and I want to upgrade it to 4.1.2. After searching google a bit i found out that there IS an official 4.1.2 android from at&t for my device and wherever I go they say to go to settings, about device, software update and update my phone from there but it says that there is no update.
I have searched for a ROM on sammobile and only found a 4.0.4 ROM for my phone.
However, I found out that there is a 4.1.2 ROM for SGS3 SGH-i747M, and some people say that their ROMs will work on my device and some say they won't.
Can someone tell me, if I install a Rogers (for example) i747M ROM on my device will it work without problem? I don't want to stay with the at&t ROM because it has too many limitations on them.
I prefer not to install custom ROMs because they are all a bit unstable..
Sorry if I have bad English, tried my best..
First off an (att) rom will work with a (rogers) phone. I'm using one right now.
Secondly, if you do manage to install a (rogers) rom on your s3 it will probably be missing apn settings and you'll have rogers apps.
Lastly, through my experience with custom roms, I have found that they are far more stable then stock, if you're looking for a good custom touchwiz rom. Look at hyperdrive
ChaosG said:
Hey guys.. I'm new to this forum and to flashing ROMs and all that so I need your help..
I used the search option and didn't find a clear answer to this..
I have bought about a month ago an at&t SGS3 SGH-i747 and I am not very happy with the current OS (android 4.1.1 at&t stock ROM) and I want to upgrade it to 4.1.2. After searching google a bit i found out that there IS an official 4.1.2 android from at&t for my device and wherever I go they say to go to settings, about device, software update and update my phone from there but it says that there is no update.
I have searched for a ROM on sammobile and only found a 4.0.4 ROM for my phone.
However, I found out that there is a 4.1.2 ROM for SGS3 SGH-i747M, and some people say that their ROMs will work on my device and some say they won't.
Can someone tell me, if I install a Rogers (for example) i747M ROM on my device will it work without problem? I don't want to stay with the at&t ROM because it has too many limitations on them.
I prefer not to install custom ROMs because they are all a bit unstable..
Sorry if I have bad English, tried my best..
Click to expand...
Click to collapse
What you are describing on Sammobile are the stock firmwares that are flashed through a program called Odin. If you tried flashing a Rogers image, you could potentially brick your phone, or as the user above said, there would be a lot of issues since that is not the firmware for AT&T. Are you rooted? If you are, that is what is causing the upgrade issue, since you have to be 100% stock.
dbaler said:
First off an (att) rom will work with a (rogers) phone. I'm using one right now.
Secondly, if you do manage to install a (rogers) rom on your s3 it will probably be missing apn settings and you'll have rogers apps.
Lastly, through my experience with custom roms, I have found that they are far more stable then stock, if you're looking for a good custom touchwiz rom. Look at hyperdrive
Click to expand...
Click to collapse
Thanks for your answer. Well, if you say that custom roms are more stable than stock, I won't argue. Just some friends told me otherwise.
I'll try to find a good rom that suits me.
Btw, I don't care if ill have Rogers apps or AT&T apps, they are both useless to me. I just don't want to brick my phone.
drx895 said:
What you are describing on Sammobile are the stock firmwares that are flashed through a program called Odin. If you tried flashing a Rogers image, you could potentially brick your phone, or as the user above said, there would be a lot of issues since that is not the firmware for AT&T. Are you rooted? If you are, that is what is causing the upgrade issue, since you have to be 100% stock.
Click to expand...
Click to collapse
I didn't flash a Rogers rom because I couldn't find a clear answer that says that it will not brick my phone. I just seen some people ask about it and didn't get an answer either. I have tried to unroot and flash a stock rom from "samsung-updates.com", a 4.1.1. Its the same as the one that I already had. Still, no update available.
ChaosG said:
Thanks for your answer. Well, if you say that custom roms are more stable than stock, I won't argue. Just some friends told me otherwise.
I'll try to find a good rom that suits me.
Btw, I don't care if ill have Rogers apps or AT&T apps, they are both useless to me. I just don't want to brick my phone.
I didn't flash a Rogers rom because I couldn't find a clear answer that says that it will not brick my phone. I just seen some people ask about it and didn't get an answer either. I have tried to unroot and flash a stock rom from "samsung-updates.com", a 4.1.1. Its the same as the one that I already had. Still, no update available.
Click to expand...
Click to collapse
If you flash a ODIN package for rogers on an AT&T phone you may brick it due to bootloader and modem
if you flash a custom zip based on an AT&T rom from XDA you won't brick since they don't contain bootloader or a modem
hope this helps
Hey Guys
I was using a rooted Note II having 4.1.2 then i decided to run a custom rom which was having Android 4.4.4 and it worked perfectly then i decided to change to the Samsung Galaxy Note 2 (4.4.2) offical firmware and installed that using the sammobile uk version and using odin.
When it was installed i couldnt call nor i could send any messages but the mobile is detecting the Sim Card but having no signals on it, It is detecting the numbers of the sim and also the 3g Internet is working.
I saw on many threads people were complaining regarding no IMEI but my IMEI i think is the correct one, I have attached the screens of the status below.
Thanks
i.imgur.com/EFthaIz.png
i.imgur.com/1HD50mv.png
msk19994 said:
Hey Guys
I was using a rooted Note II having 4.1.2 then i decided to run a custom rom which was having Android 4.4.4 and it worked perfectly then i decided to change to the Samsung Galaxy Note 2 (4.4.2) offical firmware and installed that using the sammobile uk version and using odin.
When it was installed i couldnt call nor i could send any messages but the mobile is detecting the Sim Card but having no signals on it, It is detecting the numbers of the sim and also the 3g Internet is working.
I saw on many threads people were complaining regarding no IMEI but my IMEI i think is the correct one, I have attached the screens of the status below.
Thanks
i.imgur.com/EFthaIz.png
i.imgur.com/1HD50mv.png
Click to expand...
Click to collapse
U r on stock without root n ur imei is correct?
Sent from my GT-N7100 using Tapatalk
You've probably flashed incorrect rom.
But since you haven't bothered leaving relevant info like what model your phone is and specifically which rom file you flashed nobody can be sure.
karan2012 said:
U r on stock without root n ur imei is correct?
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
I downloaded the original one from the sammobile sammobile.com/firmwares/3/?download=32635 and installed it via odin and IMEI i think is correct and it didnt show signals so i rooted it but it still didnt work, Then getting pissed off i installed clockworkmod on it that is compatible on my device and then i rooted again with a custom rom but now it wont work on the custom rom too. In other words it down grading it from an upgraded custom rom to the original rom messed up some files and now i cant call nor message anyone
TheATHEiST said:
You've probably flashed incorrect rom.
But since you haven't bothered leaving relevant info like what model your phone is and specifically which rom file you flashed nobody can be sure.
Click to expand...
Click to collapse
Ah i did flash a correct Rom, I have already said that i have Galaxy Note 2 and flashed the android 4.4.2 rom from sammobile and it was the uk version rom url sammobile.com/firmwares/3/?download=32635
msk19994 said:
I downloaded the original one from the sammobile sammobile.com/firmwares/3/?download=32635 and installed it via odin and IMEI i think is correct and it didnt show signals so i rooted it but it still didnt work, Then getting pissed off i installed clockworkmod on it that is compatible on my device and then i rooted again with a custom rom but now it wont work on the custom rom too. In other words it down grading it from an upgraded custom rom to the original rom messed up some files and now i cant call nor message anyone
Ah i did flash a correct Rom, I have already said that i have Galaxy Note 2 and flashed the android 4.4.2 rom from sammobile and it was the uk version rom url sammobile.com/firmwares/3/?download=32635
Click to expand...
Click to collapse
"galaxy note 2" is not model number, Its name of phone. Model numbers for Note 2 are n7100 or n7105 for example. There are also multiple UK roms.
Hi,
My name is Asaf and I have a kinda weird problem:
I cannot update my phone to 4.4.4 (it's on 4.4.2)
My model is 4.4.2.
So the thing is:
I tried to update and it failed,
tried again and again for 2 months and I still can't.
Today I've installed Samsung Kies 3 and it failed to update.
I live in Israel and I don't think it matters.
It is T Mobile's phone and they aren't working in israel all tough I can call and SMS and use my 3G.
I don't want to flash and I am unrooted (I had root) and I have 3.5GB of memory.
Device Information:
Android Version: 4.4.2
Model Number: GSH-M919
Firmware Number/Build Number: M919UVUFNB4
Kernel Version: 3.4.0-540242
I got my phone from T Mobile
My carier is: Golen Telecom (again, I'm from Israel, this is an Israeli company.)
Thanks for helping!
You need to provide much more information like exact model number, exact firmware version that's running on phone now, what carrier your using and also your shoe size.
In order to get the best help you need you must provide better info.
You may be trying to install the wrong update.
Pp.
PanchoPlanet said:
You need to provide much more information like exact model number, exact firmware version that's running on phone now, what carrier your using and also your shoe size.
In order to get the best help you need you must provide better info.
You may be trying to install the wrong update.
Pp.
Click to expand...
Click to collapse
I did update the topic, try helping me ok?
and It's my phone's update I can't do that wrong.
Go here http://forum.xda-developers.com/showthread.php?p=54155517 follow instructions in post #8 , if doesn't work the first time do a factory reset then repeat procedure with odin 3.07 .
Refer to YouTube on how to flash firmware tmobile S4, there are many videos on this subject, just make sure it's tmobile, not Att or Verizon.
You should have no issues.
Afterwards you can use Chainfire's autoroot to root new firmware.
Pp.
PanchoPlanet said:
Go here http://forum.xda-developers.com/showthread.php?p=54155517 follow instructions in post #8 , if doesn't work the first time do a factory reset then repeat procedure with odin 3.07 .
Refer to YouTube on how to flash firmware tmobile S4, there are many videos on this subject, just make sure it's tmobile, not Att or Verizon.
You should have no issues.
Afterwards you can use Chainfire's autoroot to root new firmware.
Pp.
Click to expand...
Click to collapse
As I told you I want to update without installing any roms.
I don't want my phone's getting ruined and my dad's killing me..
So please if you have some answers or something that can help be sure to tell me.
AsafOV said:
As I told you I want to update without installing any roms.
I don't want my phone's getting ruined and my dad's killing me..
So please if you have some answers or something that can help be sure to tell me.
Click to expand...
Click to collapse
Download this free app from the Play Store:
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Then, take screen shots of the General, Firmware and Android screens. (You can take screenshots by holding down the Power and Home at the same time until you hear the camera sound).
Then, post those screens.
This will tell us what you have.
My guess is that the T-Mobile OTA updates may not work for phones outside of the US, but I could be wrong.
You may have to flash the phone using ODIN if you have a Windows PC. There are lots of threads on flashing the Stock Roms.
You can download the firmware from either Sammobile.com or this thread: http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Rob
AsafOV said:
As I told you I want to update without installing any roms.
I don't want my phone's getting ruined and my dad's killing me..
So please if you have some answers or something that can help be sure to tell me.
Click to expand...
Click to collapse
Its not a rom it's a firmware, official from Samsung, which is exactly what an update does. Other than an OTA, it is the only way to update your device