[Q] help fas galaxy s3 at&t - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

ok i need help im going crazy i have a galaxy s3 at&t i unlocked it to work on different networks i have simple mobile now everything was working great unlocked but not rooted on stock rom then i decided to root it using odin 1.85v i did everything right it rooted my phone and then it said that it could connect to network so i said i probably need to flash a rom so i installed cm10 4.1.2 and now its not letting me call it says emergency calls only wifi everything else works wtf please help

You may need to enter your network information. Your rom may not be set up to enter that information automatically. Check your apn settings and make sure they are right for your network.
Found this:
http://forum.xda-developers.com/showthread.php?p=34173168
Sent from my SGH-I747 using Tapatalk 2

help fast galaxy s3 at&t
i tried to do that but when i press to save it nothing happens its empty

help fast galaxy s3 at&t
also my phone is at&t not tmobile

Flash a stock ROM back on it.
http://forum.xda-developers.com/showthread.php?t=1968625

And use Odin 3.07(the one we should be using), not 1.85.
Also, check to see if your imei number is correct (open a dialer, *#06#)

Related

after flashed a N7100 Rom to my I317M, I got unknown baseband and IMEI

I got my galaxy note ii from Canada Rogers network just yesterday. In order to add more language option, I falshed a N7100 ROM to my I317M. After that I got no signal on the phone, and I check into the 'about device' option, I see unknown baseband, IMEI, network and so on. I had backup the efs file, but when I trying to flash back to my phone, just nothing happen.
I did research on that, find out that to flash a stock ROM maybe have a chance to fix the problem. however, I can not find a Rogers stock ROM anywhere, so I am writing to ask if someone can help me about to fix the phone. Thanks very much.
I hope you regret using Roms which are not for your specific model.
Ok, with that aside. I have no idea where to get Rogers Roms, but I just checked that i317m is AT&T version of Note2, perhaps you'll have more luck in that section?
Beamed from Jupiter on my Galaxy Note II
AjunNg said:
I hope you regret using Roms which are not for your specific model.
Ok, with that aside. I have no idea where to get Rogers Roms, but I just checked that i317m is AT&T version of Note2, perhaps you'll have more luck in that section?
Beamed from Jupiter on my Galaxy Note II
Click to expand...
Click to collapse
thanks for the infor. I tried to flash ATT stock rom to my phone, and I keep getting fail message. Do you know how exact to flash stock rom using Odin? I can not upload the pic here because i am a new user, check the link below, the first pic
http://i914.photobucket.com/albums/ac346/jiazeng/Galaxy/Untitled1212.jpg
Dude you seriously need to read up on things before going ahead and flashing stuff with all the wrong settings.
Ask in the AT&T forums.
Beamed from Jupiter on my Galaxy Note II
This just happened to me with my i317m from rogers and all I did was use the Galaxy Note2 Toolkit to Root and install custom recovery. Voila no signal or baseband no sim etc... I returned it.
This was not posted yet... might help stock rogers rom ---rooted
http://forum.xda-developers.com/showthread.php?t=2005430
and found this NOW Rogers modem firmware
http://forum.xda-developers.com/showthread.php?t=1986480

[Q] Help! Baseband/IMEI lost

i have a bell galaxy note 2, after i flashed some custom ROM, my phone stop working, i have found similar problem on the sprint form, but doesn't know how to fix, please help.
Problem #1:
After flashing a ROM, the GN2 is unable to activate the radio/modem. The following read "Unknown" in the "About Phone" menu:
Baseband, Network, Mobile Network Type, MEID, IMEI, ICCID.....etc. Basically anything to do with the mobile network.
Problem #2:
When booted up and running, PC will not recognize the phone as usual (unable to copy files to phone).
i try odin a bell stock still doesn't work, and when i boot into recovery it keep saying is a RWC rogers phone, does that have something to do with the problem? i also try kies too, still no luck.
minghaoji said:
i have a bell galaxy note 2, after i flashed some custom ROM, my phone stop working, i have found similar problem on the sprint form, but doesn't know how to fix, please help.
Problem #1:
After flashing a ROM, the GN2 is unable to activate the radio/modem. The following read "Unknown" in the "About Phone" menu:
Baseband, Network, Mobile Network Type, MEID, IMEI, ICCID.....etc. Basically anything to do with the mobile network.
Problem #2:
When booted up and running, PC will not recognize the phone as usual (unable to copy files to phone).
i try odin a bell stock still doesn't work, and when i boot into recovery it keep saying is a RWC rogers phone, does that have something to do with the problem? i also try kies too, still no luck.
Click to expand...
Click to collapse
This has nothing to do with development.
However unless you have a backup. You'll need to return your phone for a new one.
antiochasylum said:
This has nothing to do with development.
However unless you have a backup. You'll need to return your phone for a new one.
Click to expand...
Click to collapse
sorry i posted wrong place, where can i get help, i am new to this, and how do i delete this post
Make sure you odin a rom that included the radio and kernel. Preferably a return to stock type thing. If that didn't work did you back up your efs partition?
Also what did you flash exactly?
OP please read the Forum Rules on posting in the correct Section, Moved & Thank You
I had same situation as you few days ago, I messed up my Rogers note ii with flashed 7100 rom to my i317m. I lost baseband, network imei. Luckily, after I flashed root injected FACTORY Stock rom to my rogers phone, the problem had been fixed, here is the link where you can download the root injected FACTORY Stock rom for you phone. Hopefully, you will get your phone fixed
http://forum.xda-developers.com/showthread.php?t=2004650
jjzeng said:
I had same situation as you few days ago, I messed up my Rogers note ii with flashed 7100 rom to my i317m. I lost baseband, network imei. Luckily, after I flashed root injected FACTORY Stock rom to my rogers phone, the problem had been fixed, here is the link where you can download the root injected FACTORY Stock rom for you phone. Hopefully, you will get your phone fixed
http://forum.xda-developers.com/showthread.php?t=2004650
Click to expand...
Click to collapse
Yeah i flashed this one no lucks, i think my parition is messed up, wonder if anyone has a back up efs file for my phone
Aridon said:
Make sure you odin a rom that included the radio and kernel. Preferably a return to stock type thing. If that didn't work did you back up your efs partition?
Also what did you flash exactly?
Click to expand...
Click to collapse
i flashed a rogers rooted stock version rom on my phone, so now after i did recovery it just keep on shows is a RWC in the recovery mode doesn't matter which stock rom i flash, and its saying a BMC in the download more product name. so its really messed up. because i unlocked the phone from bell, so the guy at bell told me i void the warranty on it. now i don't know what i can do to fix my phone.
Pit CSC file
any idea where i can find a pit file for my bell note 2 so i can repartion it, or that's something only samsung has it
This was a big issue with the gs3 and they've come up with a solution in that thread so given the similarities I would think that would work with some tweaking for the different partitions on the note 2. Check out the gs3 forum & maybe get in touch.. they might be able to help.
Sent from my SGS3 using my finger

Help please! Cannot get modem to work (yes, I've installed the right one!)

Hey everyone,
I just got the Galaxy S3 from Telus today, and I wanted to get Jellybean up and running as quick as possible. I rooted using mskip's toolkit, but in my haste I used Rom Manager to download a custom recovery meant for the Metro PCS Galaxy S3 and I think a rom (cm10) also meant for the Metro PCS Galaxy S3. Whenever I boot, the network shows up as Metro PCS when it should be Telus. When I use the Canada version of this: http://forum.xda-developers.com/showthread.php?t=1831898 , the phone boots up, says activating, but never finishes. If I exit out of it, nothing works. Can someone please help me?
Thanks so much, and any help is appreciated.
Start from scratch. Load a telus ROM via Odin. Root. Then continue on.
Sent from my Samsung Galaxy S3
Alright, that's what I'll do.
Thanks so much!

basic question about unlocked At&t note 2

So, I have an i317 At&t note 2. It was originally on 4.3, but I wanted to unlock it. I followed some forum posts and reverted back to 4.1 and was able to unlock it. It worked with a tmobile sim on 4.1.1, but now when I try to update it (either through Kies or through update on phone), it updates but then gets stuck at the samsung galaxy note 2 display. I found another forum post (thanks, but cant find thread atm ) which had a file to download. I installed that using Odin, but that only got it to work on 4.1.1.
I guess my question is I have the note 2 running on 4.1.1 that I factory unlocked, but now it wont let me update. How do I get 4.3 on it? Thanks
Ok there's plenty of 4.3 Rom's in the development section...
Just have to search for them!
Q: »»»»
Is it rooted?
Do you have a custom recovery installed?
Are you sure your familiar flashing Rom's?
Etc etc etc......
SENT FROM MY SAMMY i317 USING TAPATALK4
Bajanman said:
Ok there's plenty of 4.3 Rom's in the development section...
Just have to search for them!
Q: »»»»
Is it rooted?
Do you have a custom recovery installed?
Are you sure your familiar flashing Rom's?
Etc etc etc......
SENT FROM MY SAMMY i317 USING TAPATALK4
Click to expand...
Click to collapse
It is not rooted. All I have done to it is downgrade it to 4.1.1, then unlocked it. Is there a stock ROM. I want to be able to go into settings -> about phone -> and update it that way whenever a new version comes out and not have to install custom ROMS. Is that possible?
No, I don't have a custom recovery installed and I am not familiar with flashing Rom's.
I thought I could downgrade to 4.1.1, unlock, then update to the newest stock version through updates in the phone, but thats not the way it works when you unlock the note 2??
thanks
Pardon me if I sound ignorant. I am new to android (switched over from apple a month ago). The note 2 had 4.3 on it. I followed thread
http://forum.xda-developers.com/showthread.php?t=2014982
to unlock my phone, but had to revert back to 4.1.1 in order to do so. I followed posting
http://wccftech.com/guide-to-downgrade-firmware-on-samsung-galaxy-devices/
to downgrade to 4.1.1. That went successfully and I successfully unlocked the note and all was good. It was running 4.1.1 and I was using a tmobile sim. I went to updates through settings on the phone and tried to update. After that point, it just boots up to "samsung galaxy note 2" screen. I used Odin3 v3.07 to reinstall 4.1.1 and its working again.
I would ideally like to be able to go through software updates on the phone to update it and not need to use custom roms. Is the problem I am trying to update from 4.1.1 to 4.3 and I need to manually update to 4.2.x first, then go to 4.3?
I don't understand why unlocking it prevents me from updating from 4.1.1. I have tried through the phone and through Kies, which keeps getting an error. Does this make sense? Am i doing something wrong? The phone is originally At&t. Do I need an At&t sim inserted to update through the phone?
thanks for all the help and once again, sorry if these questions seems elementary. I am reading through forum posts and trying to understand what all this means. I'm not sure what rooting or flashing means and how flashing is different then unlocking.
Thanks for the help
scottrf8 said:
Pardon me if I sound ignorant. I am new to android (switched over from apple a month ago). The note 2 had 4.3 on it. I followed thread
http://forum.xda-developers.com/showthread.php?t=2014982
to unlock my phone, but had to revert back to 4.1.1 in order to do so. I followed posting
http://wccftech.com/guide-to-downgrade-firmware-on-samsung-galaxy-devices/
to downgrade to 4.1.1. That went successfully and I successfully unlocked the note and all was good. It was running 4.1.1 and I was using a tmobile sim. I went to updates through settings on the phone and tried to update. After that point, it just boots up to "samsung galaxy note 2" screen. I used Odin3 v3.07 to reinstall 4.1.1 and its working again.
I would ideally like to be able to go through software updates on the phone to update it and not need to use custom roms. Is the problem I am trying to update from 4.1.1 to 4.3 and I need to manually update to 4.2.x first, then go to 4.3?
I don't understand why unlocking it prevents me from updating from 4.1.1. I have tried through the phone and through Kies, which keeps getting an error. Does this make sense? Am i doing something wrong? The phone is originally At&t. Do I need an At&t sim inserted to update through the phone?
thanks for all the help and once again, sorry if these questions seems elementary. I am reading through forum posts and trying to understand what all this means. I'm not sure what rooting or flashing means and how flashing is different then unlocking.
Thanks for the help
Click to expand...
Click to collapse
What is unclear is why ware you trying unlock it, what carrier it was on and what carrier you are changing to,
You're asking if it needs an ATT SIM to update, so I'm lost on what carrier it was on.
The original carrier is at&t. I unlocked it and now am using a tmobile sim. However, when I got to settings and check for updates, it says "checking at&t servers for updates". So it is working for tmobile now, but only on 4.1.1. I don't mind downloading custom roms (and definitely appreciate the work), but I would like the option to not have to.
And when I boot up the phone, even though the network says tmobile, it shows at&t start up screen when it boots up into 4.1.1. Which is why u was thinking maybe the reason it won't do updates through the phone is cause there is no at&t sim inserted when it is "checking at&t server for updates"
scottrf8 said:
And when I boot up the phone, even though the network says tmobile, it shows at&t start up screen when it boots up into 4.1.1. Which is why u was thinking maybe the reason it won't do updates through the phone is cause there is no at&t sim inserted when it is "checking at&t server for updates"
Click to expand...
Click to collapse
Well, over my head here. I think you have figured out technically why it's not working.
You are operating on a T-mobile network and you will not see ATT servers.
Even though it's says you are on T-mobile is anything working? Like texting, surfing or cell calls?
I would imagine texting is not since the config should be pointing at ATT servers.
I would think you should be running one of these factory images
http://forum.xda-developers.com/showthread.php?t=1969551
I personally do not know if the T-889 is close to the ATT Note 2 model.
You may want to bounce over to this forum
http://forum.xda-developers.com/note-2-tmobile
See if anyone has attempted what you are doing.
In my mind you need to flash a T-mobile image to do what you want.
I am not suggesting you do this, I am merely giving you an opinion.
You may want to investigate this custom ROM
http://forum.xda-developers.com/showthread.php?t=2568537
||ROM|| Jedi MasterX2 ||4.3||MULTICARRIER
Yeah, I dunno. It's an i317 on at&t. And it was definitely on tmobile cause it let me send text messages and it showed "tmobile" across the top as well as their 4g icon.
All I was trying to do was unlock my at&t note 2. Now its unlocked but stuck to 4.1.1. Lol
scottrf8 said:
Yeah, I dunno. It's an i317 on at&t. And it was definitely on tmobile cause it let me send text messages and it showed "tmobile" across the top as well as their 4g icon.
All I was trying to do was unlock my at&t note 2. Now its unlocked but stuck to 4.1.1. Lol
Click to expand...
Click to collapse
You may want to investigate this custom ROM
http://forum.xda-developers.com/show....php?t=2568537
||ROM|| Jedi MasterX2 ||4.3||MULTICARRIER
It is customized to install for multiple carriers. It's a user configurable install. You can pick which carrier you are, which apps to install etc.
It is 4.3
hey dicksteele, the page isnt found....
scottrf8 said:
hey dicksteele, the page isnt found....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2568537
Main page
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

In need of stock sch-s960l rom.

looking for the sock roms for a tracfone version of the s3 (sch-s960l) i have tried to update in kies but it tells me my s/n is wrong and wont let me get any futher. it is running a rooted version of a sprints rom ics but no mobile network not text or phone calls. looking for stock the rom to get the phone working. any help is greatly appreciated.
Did you find one?
xsteve4578x said:
looking for the sock roms for a tracfone version of the s3 (sch-s960l) i have tried to update in kies but it tells me my s/n is wrong and wont let me get any futher. it is running a rooted version of a sprints rom ics but no mobile network not text or phone calls. looking for stock the rom to get the phone working. any help is greatly appreciated.
Click to expand...
Click to collapse
Did you find one, I had found one but the link no longer works and I don't know what happened to my copy of the stock rom (md5 and pit files)... please let me know

Categories

Resources