Hey, i have a weird task but i don't trust myself to do it. So is it possible someone on here would be able to repair my T999L screen?
Details: The charger port is broken. I don't know how
The screen is cracked. The outer touch screen is fine, but the LCD is crack
I have a sprint one with a working LCD but the touch screen is cracked, but it works fine. If anyone would be able to separate the touch screen from the sprint S3 and put it on the LCD of the T999L since i use T-Mobile? Payment will be discussed
Related
I bought a G2 with a broken glass Digitizer. I replaced the digitizer but the LCD screen was cracked as well. So i replace that too. After replacing the glass digitizer and lcd screen the phone would respond in certain areas. SOOO I took the phone apart once more and press the LCD against the Glass digitizer which help with some of the "dead spots" on the screen. But there are still some "dead" spots here and there. Is there anything i could do to have the Lcd screen stick to the digitizer so i don't have these issues. I love my G2 but its useless at points when the multi touch is not working properly.
You should have sent it back on warranty.
Removed "Void" sticker over one of the screws
I removed one of the stickers do you think they'll notice?
no, they'll send you another one as soon as they get the tracking no. from you.
Hey guys, i read through a couple of threads about cacked screens but im still a little confused. i droped my phone and the bottom half of the screen cracked, i can still use the phone without any problems. so do i need a digitizer or new lcd??
digitizer is the glass part that you touch, lcd is the screen itself. If you can see a full picture, then the lcd is fine.
sitlet said:
digitizer is the glass part that you touch, lcd is the screen itself. If you can see a full picture, then the lcd is fine.
Click to expand...
Click to collapse
Ok thanks, my phone is still in perfect working condition. just the glass is all cacked up, so now i need to find a cheap digitizer..
Ebay
Sent from my EVO
My friend found one off amazon for like $13-15 I can't remember. I looked it up too and it was about the same. He didn't have any issues replacing the glass either. If you have the insurance you might try a sprint store, or a authorized sprint store. I bought a Epic fro ma coworker and it had a cracked screen, took it to the repair place and they did it for free. (after making the phone my wifes main phone)
I have a SGH-M919 Galaxy S4 that works fine except for the touch screen (digitizer). There are no cracks on the screen and the display is fine. I see that there are a lot of guides for replacing the LCD/digitizer combo, but none that show only replacing the digitizer. Is that possible? I assume the combo consists of a front glass, the digitizer, and then the LCD. Can these be separated?
I swapped the motherboard from this S4 with the motherboard on a working S4 and the touch screen remained inoperative, so I know it is just the digitizer. Is it possible it is just the flax cable that connects to the motherboard? If so, can it be replaced by itself.
There are a lot of vendors on eBay selling LCD/digitizer combos for $100 - $200, but I hate spending that much when the screen is working fine. Any suggestions from the forum would be greatly appreciated.
Craig
CraigLD said:
I have a SGH-M919 Galaxy S4 that works fine except for the touch screen (digitizer). There are no cracks on the screen and the display is fine. I see that there are a lot of guides for replacing the LCD/digitizer combo, but none that show only replacing the digitizer. Is that possible? I assume the combo consists of a front glass, the digitizer, and then the LCD. Can these be separated?
I swapped the motherboard from this S4 with the motherboard on a working S4 and the touch screen remained inoperative, so I know it is just the digitizer. Is it possible it is just the flax cable that connects to the motherboard? If so, can it be replaced by itself.
There are a lot of vendors on eBay selling LCD/digitizer combos for $100 - $200, but I hate spending that much when the screen is working fine. Any suggestions from the forum would be greatly appreciated.
Craig
Click to expand...
Click to collapse
I also would like to know this; if anyone can explain the steps or point towards a guide that would be very helpful.
I have had a bad luck and my phone fell out of my pocket and got cracks on the screen, i think its digitizer because the picture is all perfect inside the screen otherwise the liquid would have defiantly came out of the LCD!!!
I have tried pressing on the cracked class and see if liquid comes out or it forms a black spot or anything but nothing happened!!!
The combo of LCD & Digitizer costs 2500-4000 Indian Rupees while only 800Rs for Digitizer so i am thinking of only buying figitizer from ebay but i dont know any way to separate the LCD & Digitizer
Anyone have any idea on doing that and how can i put the digitizer back on LCD?
Thanks!
P.S. The touch is working perfectly even when cracked heavily!
Well..After posting a thread a few days back about the display problem i was facing with my phone..It's now completely dead everything works fine except no display,It plays sound at startup even vibrate is responsive had bought this phone in USA currently in India,i've visited countless samsung service center they give me the same BS reason as parts not avalible so i wanted to ask you guys there's a way i could possibly fit i9300 LCD into i9305? and what does digitizer do? my Touch is responsive so would i need to buy both LCD and Digitizer or just teh LCD,i need it ASAP as i have my data in phone and it's locked so i can''t copy my data either,please need urgent help.
This forum is for the i747 and i747m version of the s3. You have the international version and there is a separate forum here: http://forum.xda-developers.com/galaxy-s3
The digitizer is the glass on top of the LCD that senses touch. The LCD is what you can see on the phone's screen.
I recommend replacing the digitizer and screen together as the digitizer is bonded to the LCD.
It may not be so simple because it may not be the LCD that is defective. It could be the the phone's motherboard too.
audit13 said:
This forum is for the i747 and i747m version of the s3. You have the international version and there is a separate forum here: http://forum.xda-developers.com/galaxy-s3
The digitizer is the glass on top of the LCD that senses touch. The LCD is what you can see on the phone's screen.
I recommend replacing the digitizer and screen together as the digitizer is bonded to the LCD.
It may not be so simple because it may not be the LCD that is defective. It could be the the phone's motherboard too.
Click to expand...
Click to collapse
Yeah,i figured that out,thanks btw i got a new s4 got it for cheaper price as its older model
Sent from my GT-I9500 using XDA Free mobile app
Yeah, the cost of replacing the LCD and digitizer with a really OEM Samsung is expensive which is why I look for used phones with working screens.