I am trying to carrier/sim-unlock my ATT I747 and when I try the unlock code in CM11 is throws a "network request unlock unsuccessful". I read somewhere that you have to be on a stock samsung rom in order to correctly sim unlock, but when I try to flash back to one of them using odin I get the error "SW REV CHECK FAIL : Fused 2 > Binary 0". Does anyone have any idea on how to fix this? Only trying to unlock the sim.
This is the full output I get when trying to flash back to stock.
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: Yes (1 COUNTS)
cURRENT BINARY: Custom
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
WARRANTY BIT: 1
BOOTLOADER AP SWREV: 2
SW REV CHECK FAIL : Fused 2 > Binary 0
APOLOGIES, THIS ISSUE HAS BEEN FIXED, I USED THE STEPS MENTIONED IN THIS THREAD
http://forum.xda-developers.com/showthread.php?t=2498233
Related
Hi,
I had stock 4.3 firmware on my att i747 galaxy s3, then I decided to flash cyanogenmod. everything went well but i dont really like it.
Now I want to go back to stock. I tried flashing the stock rom with odin but it fails and it says this on the phone:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: Yes (2 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOADER RP SWREV: 2
SW REV CHECK FAIL : Fused 2 > Binary 0
The android version it shows is 4.3.1 and im able to use it normally with the cyanogenmod.
What can I do to flash a stock rom back?
EDIT: used triangle away and the custom binary download says "no" now and the current binary says "samsung official" but still get the same problem.
Thank You
Watch out with the double threads. Some people can get cranky about it.
So I recently bought a galaxy s3 from a friend and tried rooting it today, but something went horribly wrong and it won't work.
It tells me "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I have tried doing that and I can not get it to work. The phone won't even connect to Kies... HELP
This is what it says at the top of the screen.
ODIN Mode
Product name: SPH-L710
Custom Binary Download: Yes (1 counts)
Current Binary: Custom
SYSTEM STATUS: Official
Dualcomm Secureboot: Enable
Warranty Bit: 0
Bootloader RP SWREV: 1
PLEASE HELP SOON!!!
Root/Recovery via ODIN stuck at recovery.img push
Jezdan said:
So I recently bought a galaxy s3 from a friend and tried rooting it today, but something went horribly wrong and it won't work.
It tells me "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I have tried doing that and I can not get it to work. The phone won't even connect to Kies... HELP
This is what it says at the top of the screen.
ODIN Mode
Product name: SPH-L710
Custom Binary Download: Yes (1 counts)
Current Binary: Custom
SYSTEM STATUS: Official
Dualcomm Secureboot: Enable
Warranty Bit: 0
Bootloader RP SWREV: 1
PLEASE HELP SOON!!!
Click to expand...
Click to collapse
Bump!
I am using the GS3 Toolkit v7.5.1 on a Sprint SPH-L710 totally stock untouched ROM.
I kinda made an alteration by adding the TWRP Recovery v2.6.3.1 for this Sprint GS3 variant, and renamed it to the TWRP recovery included with the Toolkit i.e. TWRP 2.5.0.0
Now while going through the Root/Recovery (ALLINONE) option, when Odin comes up, it sends the boot.img fine, but is now stuck on sending down recovery.img.
But I don't know enough about Odin or the GS3, to know if I can just shut down Odin, and it'll trigger the phone to reboot and I can not be sneaky, replace the original recovery, and try again?
This is what my phone says on the "Downloading..." screen
Code:
[COLOR="Red"][B]ODIN Mode[/B][/COLOR]
Product name: SPH-L710
Custom Binary Download: [B][COLOR="Green"]No[/COLOR][/B]
Current Binary: SAMSUNG Official
SYSTEM STATUS: Official
Qualcomm Secureboot: ENABLE
Can I shut down Odin, and manually reboot the phone to the Download mode, and repeat the process?
PLEASE Help!
Hi Guys,
I have an unlock code from AT&T and I want to use it from the Stock ROM. I am currently running CM 11 nightlies.
I tried the standard method of using ODIN from PC to flash stock ROM. It doesnt seem to work. I am always stuck in ;NAND write Fail'.
Before installing CM a while ago I updated OTA to 4.3, and based on what I read everywhere this seems to have something to do with the issue.
Any help on how to proceed will be great.
I am using ODIN 3.07
Downloaded Stock ROM from sammobile.
This is what my download screen reads.
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: Yes (2 Counts)
CURRENT BINARY: CUSTOM
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOADER AP SWREV: 2
SW REV CHECK FAIL: Fused 2 > Binary 0
Thanks!
Once you have the 4.3 bootloader, you cannot use Odin to install a stock AT&T ROM. You can try this: http://forum.xda-developers.com/showthread.php?t=2658486
audit13 said:
Once you have the 4.3 bootloader, you cannot use Odin to install a stock AT&T ROM. You can try this: http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
Thanks! I will take a look. Hopefully I can unlock my device at some point.
Was able to unlock based on the lead from post #2
Flashed my root s6 to new official MM6.0.1 firmware from SamFirm using Odin
Device wont boot only see samsung logo then takes me to Android Recovery this is what i see:
Android Recovery
MMB29K.G925TUVU3ED1
samsung/zeroltetmo/zeroltetmo
6.0.1/MMB29K/G925TUVU3EPD1
user/release-keys
...
Supported API: 3
Device does not have DRK, contact to SW PL
Please flash ENG binary then install DRK
It allows me to go into download mode but every time i flash a firmware i get same DRK issue...
Download Mode shows:
ODIN MODE
PRODUCT NAME: SM-G925T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
FRP LOCK: OFF
Secure Download : Enabled
KNOX WARRANTY VOID: 1 (0x0304)
RP SWREV: B:3 K:2 S:2
already tried...
http://forum.xda-developers.com/note5/help/how-to-solve-dm-verity-verification-t3293306
http://forum.xda-developers.com/tmo.../g925t-4-files-firmware-6-0-1-update-t3357408
and flashing other official software using odin but no luck...
i had my s3 i747m on cm13. i was having a lot of problems with bluetooth. so i tried going back to stock firmware and i bricked my phone. i can still access download mode.
with odin running as admin or not, this is what it says when i try to install stock rom in download mode:
ODIN MODE
PRODUCT NAME: SGH-I747M
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOADER RP SWREV: 2
SW REV CHECK FAIL : Fused 2 > Binary 0
i've tried looking for solutions, but all say the same thing...which is to use odin and install the stock rom file.
i had twrp recovery installed if that helps.
sal82 said:
i had my s3 i747m on cm13. i was having a lot of problems with bluetooth. so i tried going back to stock firmware and i bricked my phone. i can still access download mode.
with odin running as admin or not, this is what it says when i try to install stock rom in download mode:
ODIN MODE
PRODUCT NAME: SGH-I747M
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOADER RP SWREV: 2
SW REV CHECK FAIL : Fused 2 > Binary 0
i've tried looking for solutions, but all say the same thing...which is to use odin and install the stock rom file.
i had twrp recovery installed if that helps.
Click to expand...
Click to collapse
can you re-flash twrp recovery?
ethanchow said:
can you re-flash twrp recovery?
Click to expand...
Click to collapse
OMFG!! thank you!! it's working again with cm13! i was pulling my hair out lol.
i just reflashed twrp with odin and it started to work. i guess it was just the recovery files damaged?
sal82 said:
OMFG!! thank you!! it's working again with cm13! i was pulling my hair out lol.
i just reflashed twrp with odin and it started to work. i guess it was just the recovery files damaged?
Click to expand...
Click to collapse
Yes, sometimes stock images won't flash because the bootloader version is lower than the one you have.