Develop Bugs

[Q] Problems with A2SD (non Froyo Version)

Hi there,
I have a little problem with a2sd.
I partitioned my 16 GB sd-card to 15GB Fat32 and 1 GB ext3.
My actual rom is AuraxTSense-8.1.1. Everything is fine ... the Desire says
640 MB ram left for applications ... that's ok.
Same when I flash MIUI. All is ok ... ok MIUI is not my favorite rom, so I want to flash the new AuraxTSense_8.4_Official_OTA_2.2_FRF91_A2SD+.zip, but there is
the problem. This rom did not notice my ext3 partition for apps, although it is an A2SD+. Same with LeeDrOiD_V2.4_A2SD.zip. On all flashing session I did a full wipe.
Now I'm back to the AuraxTSense-8.1.1 with working A2SD.
I searched the inet and forum, but I didn't find any good clue. Only hints how
to partition the sd-card. And my partition seems to be ok.
Hmm ... anyone any hint for me? AuraxTSense-8.1.1 is a bit unstable, it reboot without any reason once a day, MIUI is not mine ... I love sense ...
Thanks for your help ....
TechZombie ...

Possibly wrongly partitioned?
Try to re-partition it.
Download Gnome Partition Editor (GParted Live) here on CD or USB.
Read the documentation at on GParted website ~ how to partition your drive? (Most answers of your questions are there).
Backup your SD card data to PC before start partitioning.
Boot into GParted Live on CD or USB (Make sure that your motherboard first boot is either CD or USB).
Follow onscreen instructions to get GParted Live loaded.
Note – select your SD card as the drive. DON’T select your hard drive.
Delete every partition on SD card.
First create a primary FAT32 partition.
Then create another primary ext(2,3 or 4) partition ~ 1GB or more.
Exit GParted Live and back to Windows.
Copy back your data to SD card.
Click to expand...
Click to collapse

davebugyi said:
Possibly wrongly partitioned?
Try to re-partition it.
Click to expand...
Click to collapse
please try this:
Take a Usb-stick.
! YOUR DATA FROM YOUR STICK WILL BE LOST, BACKUP BEFOR GPARTED INSTALL!
! BACKUP YOUR DATA FROM YOUR DESIRE SD-CARD, ALL DATA WIL BE LOST USING THIS METHOD!
Download gparted, install it using unetbootin.
start gparted form your usb-stick.
Mount your sd-card in clockwork-recovery.
Remove all partitions in GParted from your desire sd-card.
create a new partition form about 1Gb ext-4.
then create a new partition (fat-32) that fils the rest of your sd-card.
Note: the ext-4 partition needs to be in front of the fat-32 partition.
restore your desire sd-card data.
I hope this helps

@davebugyi: This was the exact way I partitioned my sd-card ... strange ...
@Keon91: The ext4 partition before the fat32? I thought ext after fat ... ok let's give a try ... must it be ext4 or is ext3 ok? I heard ext4 reduces sd-card life?
Thanks ....
TechZombie ...

as I can remember I had my ext4 partition in front of my fat32 partition.
when I view my partions in gparted ext4 is in front of fat32.
fat32 has label : sba1.
ext4 has label : sba2.
I never heard ext4 would reduce sd-card life. In the insertcoin thread they recommend a ext4 partition.

Finnaly I solved it ...
First I tried ext4 in from of fat32. Problem: Windows didn't notice the fat32 partition.
@Keon91: The lables of your partitions show that in your configuration the fat32 is also in front of the ext partition.
After this, I partitioned again with gparted to 15gb fat32 and 1gb ext3 ... both primary ... and now ... i don't know why ... the ext3 is found by a2sd ...
Thanks to all ...
TechZombie ...

Link2SD - getting two partitions working on your SD card

I have been fighting with this for some time but finally figured it out.
To get Link2SD working I had to format my first partition as FAT (aka Fat16 - NOT Fat32!). The second (for Link2SD afaik) was Ext2. I tried Fat32 but couldn't get that working so stuck with Ext2 for partition 2. I'm using Windows on my main PC so used minitool partition wizard home edition to create the partitions. Minitool is brilliant freeware for Windows, for ages one had to boot linux to fiddle with other than Windoze partitions.
I hope this helps someone else - I was pulling my hair out!! Perhaps a sticky??

how large was your second partition? I'm using minitool and didn't see an option for fat 16

ryanpl said:
how large was your second partition? I'm using minitool and didn't see an option for fat 16
Click to expand...
Click to collapse
I also used Minitool - what I did was Create my first FAT partition of 3 Gb, then my second FAT32 partition of 1Gb. 1Gb for Link2SD and 3Gb for data - I was thinking that's enough. *EDIT* Fat32 wasn't being mounted properly so I changed partition 2 to Ext2 and it's working fine now.
Minitool calls it FAT as opposed to FAT32. FAT = Fat16. HTH

Oh I have a 16gb card I'm trying to use.

BTW, how much of the original memory is allocated for apps? Has someone ever reached it?

Partitioning SD Card

Hi, I have already partitioned my 8gb SD card. I made 1 FAT32 Partition with 1.3gb of unused space, while i used the left memory to make a EXT4 partition with around 6.5gb.... My question is, why the second partition is invisible in windows, and where should i put my music and stuff...... Also, Link2SD says that it can't mount the script because of an invalid argument... Please help me fix this..... I'm using HenseMod6 by the way

Around 1-2 GB of Ext partition is enough. Ext* partitions are linux filesystems and cannot be read by windows. Your music and photos should go on the fat partition.
Your rom may not support ext4, try reformatting it to ext3

Thanks, mate. My ClockworkMod Recovery helped mi fix it..

[Q] About Ext partition from CWM

Hi, I have bought a 4gb SD Card, and made Ext partition from CWM 5.0.2.6.
Anyone can tell me what ext partition I have made: ext2/ext3/ext4? How i can upgrade to higher ext partition?
Sorry for my bad English
Thx for reply

I think you shoud use pc and partition managers to know that and upgrade.
Sent from my GT-S5660 using Tapatalk 2

I think you've made a EXT2 partition, CWM only goes up to EXT2
If you're using a Windows PC, you can download and use a tool called MiniTool® Partition Wizard (Home)
Delete the EXT2 partition on your SDCARD and make (move/resize) a new EXT4 Primary partition with a cluster size of 4KB
Hit Apply on the Top-Left corner

baterfly777 said:
I think you shoud use pc and partition managers to know that and upgrade.
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Thx
Peteragent5 said:
I think you've made a EXT2 partition, CWM only goes up to EXT2
If you're using a Windows PC, you can download and use a tool called MiniTool® Partition Wizard (Home)
Delete the EXT2 partition on your SDCARD and make (move/resize) a new EXT4 Primary partition with a cluster size of 4KB
Hit Apply on the Top-Left corner
Click to expand...
Click to collapse
Thx but I must use card reader?

multifearz261 said:
Thx but I must use card reader?
Click to expand...
Click to collapse
Yes. You must.

i have tried with MiniTool Partition but after make ext4, partition force back to ext2 and linux swap?
_______________
I tried with another SD card, after make ext partition, there no ext4 partition apear on MiniTool Partition Wizard Home Edition
Click to expand...
Click to collapse
Solved

Link2SD & Partitioning Help

Hey everyone. I'm going nuts trying to figure out how to use Link2SD. I partitioned my 32G SD card using Mini Partition Tool. I made a 1 gig partition. I've tried FAT32 and EXT2. After partitioning, i rebooted and tried Link2SD. I keep getting the error "Mount script cannot be created. [1] Segmentation fault mount ..."
Is there any solution for the xperia play? I manually moved my apps but still ran out of space keeping system tools like Titanium Backup on the internal. Maybe I should make them System Apps?

I use the following on mine setup:
64gb Card (Fat32 - Primary)
5GB for EXT4 partition (Make sure when you partition it to set it as primary.)
300mb Swap Partition
I had an issue with Link2SD too ad it was because I was not setting the EXT partition as primary, oncei formatted it again as primary Link2SD had not issue with it. Try that.

ozzmanj1 said:
I use the following on mine setup:
64gb Card (Fat32 - Primary)
5GB for EXT4 partition (Make sure when you partition it to set it as primary.)
300mb Swap Partition
I had an issue with Link2SD too ad it was because I was not setting the EXT partition as primary, oncei formatted it again as primary Link2SD had not issue with it. Try that.
Click to expand...
Click to collapse
Hey thanks for the reply. Just tried what you said. My FAT32, ext4, and Swap are all Primary and sill no go. I get the same error (segmentation fault mount -t ext4...). When Link2SD opens I've tried selecting all the options for the parition type too and none of them work.
Anything else I can try? Does the order of the partitions make any difference? Right now I am Primary, ext4, Swap.

echardcore said:
Hey thanks for the reply. Just tried what you said. My FAT32, ext4, and Swap are all Primary and sill no go. I get the same error. When Link2SD opens I've tried selecting all the options for the parition type too and none of them work.
Anything else I can try? Does the order of the partitions make any difference? Right now I am Primary, ext4, Swap.
Click to expand...
Click to collapse
Ah.... okay, I should have clarified this, only the fat32 and EXT partition are set to Primary. Swap Partition is set to logical, setting all three to primary causes issues.
Reformat only the swap and format to logical. Then in Link2SD force it to reinstall the scripting and see if that fixes it.

ozzmanj1 said:
Ah.... okay, I should have clarified this, only the fat32 and EXT partition are set to Primary. Swap Partition is set to logical, setting all three to primary causes issues.
Reformat only the swap and format to logical. Then in Link2SD force it to reinstall the scripting and see if that fixes it.
Click to expand...
Click to collapse
Okay then. New problem. Now Link2SD says "No SD card present" and android doesn't mount it either.
This is killing me slowly.
I'll try to reformat the whole card via a reader...
Didnt work. SD card still not recognized.

echardcore said:
Okay then. New problem. Now Link2SD says "No SD card present" and android doesn't mount it either.
This is killing me slowly.
I'll try to reformat the whole card via a reader...
Didnt work. SD card still not recognized.
Click to expand...
Click to collapse
OK. If your willing, lets start fresh. I am guessing you have your SDcard files backed up. Using Minitool partition delete all partitions and format as FAT32. Then create another partition of your size and format it as EXT (I prefer 4, EXT4) and set it to EXT(2,3,4,etc) and Primary. Then just for kicks, do not make a swap partition. I read that its not necessary, however I always do it..... well necessary only if you use a swap manager. So after the fat32 and ext partitions are made and minitool has created them. Take out the card, put it back into your pc and see if windows sees the fat32 partition. If good place it back into your phone and see if it upon bootup sees your sdcard.
Just in case as a reference here is the tutorial from the developer of Link2SD on how to set it up.
http://www.link2sd.info/description

ozzmanj1 said:
OK. If your willing, lets start fresh. I am guessing you have your SDcard files backed up. Using Minitool partition delete all partitions and format as FAT32. Then create another partition of your size and format it as EXT (I prefer 4, EXT4) and set it to EXT(2,3,4,etc) and Primary. Then just for kicks, do not make a swap partition. I read that its not necessary, however I always do it..... well necessary only if you use a swap manager. So after the fat32 and ext partitions are made and minitool has created them. Take out the card, put it back into your pc and see if windows sees the fat32 partition. If good place it back into your phone and see if it upon bootup sees your sdcard.
Just in case as a reference here is the tutorial from the developer of Link2SD on how to set it up.
http://www.link2sd.info/description
Click to expand...
Click to collapse
PC sees the FAT32. Phone sees the card now. Link2SD shows the partition but cant mount it and create the script for it. Also tried as ext2. Thanks for your help. I am going to try to update the ROM.
After updating the ROM to 2.4.0 and waiting 10 mins and rebooting as usual. was able to successfully link the partition! Thanks for your help!

No problem. Glad you got it working.
Sent from my R800at using xda premium

Got all my apps installed! Woot! Also, something must have been messed up with my previous flash.. I wasn't able to restore apps the newer way from titanium backup. I had to do it the old way one by one.
phone is going to make a great gaming alternative to my SGSII.