I am currently using Beanstlk 4.4.075, Baseband I747UCLH9 on ATT Galaxy S3
When I try to install any Beanstalk upgrade ROM I get the following error message
assert failed: getprop ("ro.bootloader")==1747UCDLK3
getprop ("ro.bootloader")==1747MVLDLK4
getprop ("ro.bootloader")==1747MUMBLK3
getprop ("ro.bootloader")==1747MUMBLL1
error in /sdcard/cm-10.1.0-rc5-d2att.zip (status 7)
installation aborted
Any and all suggestions is greatly appreciated!!!
What bootloader is loaded onto your phone? Are you running the latest CWM or TWRP?
audit13 said:
What bootloader is loaded onto your phone? Are you running the latest CWM or TWRP?
Click to expand...
Click to collapse
bootloader I747UCALH9
CWM 6.0.4.5
Looks like the ROM does not support your phone's current bootloader. Was you phone running stock 4.04?
audit13 said:
Looks like the ROM does not support your phone's current bootloader. Was you phone running stock 4.04?[/QUOT
I did go back to stock then re-rooted and installed the ROM I have now. Should I install another bootloader? What and which do you suggest?
Click to expand...
Click to collapse
MSMoises said:
audit13 said:
Looks like the ROM does not support your phone's current bootloader. Was you phone running stock 4.04?[/QUOT
I did go back to stock then re-rooted and installed the ROM I have now. Should I install another bootloader? What and which do you suggest?
Click to expand...
Click to collapse
Have you ever had a stock 4.3 ROM on your phone? If you did, you cannot flash any bootloader that is older than your current bootloader.
What was the last official ROM you had on your phone?
Click to expand...
Click to collapse
audit13 said:
MSMoises said:
Have you ever had a stock 4.3 ROM on your phone? If you did, you cannot flash any bootloader that is older than your current bootloader.
What was the last official ROM you had on your phone?
Click to expand...
Click to collapse
The last official ROM was the stock ROM for ATT S3.. 4.0???
Click to expand...
Click to collapse
MSMoises said:
audit13 said:
The last official ROM was the stock ROM for ATT S3.. 4.0???
Click to expand...
Click to collapse
It's been updated all the way to 4.3 but it sounds like you never ran an OTA update for 4.3.
An easy way to update the bootloader is to install a pre-rooted stock AT&T 4.1.1 ROM from here: http://forum.xda-developers.com/showthread.php?t=1739426.
You should also make sure you're running the latest custom recovery. I recommend the tar version of Philz Touch located here and flashable via Odin: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
I use Philz on my i747m.
Click to expand...
Click to collapse
audit13 said:
MSMoises said:
It's been updated all the way to 4.3 but it sounds like you never ran an OTA update for 4.3.
An easy way to update the bootloader is to install a pre-rooted stock AT&T 4.1.1 ROM from here: http://forum.xda-developers.com/showthread.php?t=1739426.
You should also make sure you're running the latest custom recovery. I recommend the tar version of Philz Touch located here and flashable via Odin: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
I use Philz on my i747m.
Click to expand...
Click to collapse
all he has to do is change the updater script to remove the asserts in the updater script. if he downgrades from 4.3 he will brick even if it was OTA or the leak. if you try to downgrade you will brick
Click to expand...
Click to collapse
Andy_nu said:
audit13 said:
all he has to do is change the updater script to remove the asserts in the updater script. if he downgrades from 4.3 he will brick even if it was OTA or the leak. if you try to downgrade you will brick
Click to expand...
Click to collapse
I understand but the OP doesn't appear to be on a 4.3 bootloader so flashing a pre-rooted 4.1.1 AT&T ROM via Odin should be fine.
Click to expand...
Click to collapse
audit13 said:
Andy_nu said:
I understand but the OP doesn't appear to be on a 4.3 bootloader so flashing a pre-rooted 4.1.1 AT&T ROM via Odin should be fine.
Click to expand...
Click to collapse
So what would be my best and safest way to change or update my bootloader?
Click to expand...
Click to collapse
MSMoises said:
audit13 said:
So what would be my best and safest way to change or update my bootloader?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2321310
read
Click to expand...
Click to collapse
Andy_nu said:
MSMoises said:
http://forum.xda-developers.com/showthread.php?t=2321310
read
Click to expand...
Click to collapse
Thanks after running through Odin and letting it sit overnight.. booted up in 4.1.1 this morning. Thanks for all the help!
Click to expand...
Click to collapse
MSMoises said:
Andy_nu said:
Thanks after running through Odin and letting it sit overnight.. booted up in 4.1.1 this morning. Thanks for all the help!
Click to expand...
Click to collapse
awesome gladi could help
Click to expand...
Click to collapse
Related
Hi guys,
Is it possible to flash a custom kernel with stock rom (4.0.2) that is rooted?
Thanks in advance.
The kernel will have to be 4.0.2 compatible, but yes you can do it.
I have some question on this thread, If I flash the custom kernel to stock rom, when the new stock rom update launch, How do I got the update.
thanks,
mirageromeo said:
I have some question on this thread, If I flash the custom kernel to stock rom, when the new stock rom update launch, How do I got the update.
thanks,
Click to expand...
Click to collapse
You will have to flash it manualy.
Diger36 said:
You will have to flash it manualy.
Click to expand...
Click to collapse
As you told manually flash, you mean do follow like this http://forum.xda-developers.com/showthread.php?t=1419170 post right?
mirageromeo said:
As you told manually flash, you mean do follow like this http://forum.xda-developers.com/showthread.php?t=1419170 post right?
Click to expand...
Click to collapse
No. You will have to flash back the stock kernel for the update to install automatically.
efrant said:
No. You will have to flash back the stock kernel for the update to install automatically.
Click to expand...
Click to collapse
I found only custom kernel on this site, Please tell me where can I find the stock kernel.
thanks.
mirageromeo said:
I found only custom kernel on this site, Please tell me where can I find the stock kernel.
thanks.
Click to expand...
Click to collapse
The stock kernel is part of the boot.img file in the factory images. Extract it for the version of Android that you are on, and flash it.
I just want to know if i its possible to flash 4.2.2 rom official over custom rom 4.1.2 via odin? And what will be the process. Thank you.
kramzkie10 said:
I just want to know if i its possible to flash 4.2.2 rom official over custom rom 4.1.2 via odin? And what will be the process. Thank you.
Click to expand...
Click to collapse
Yes, it's possible. Just flash through ODIN. And after flash, reboot into stock recovery and wipe data or else you will get a bootloop.
soralz said:
Yes, it's possible. Just flash through ODIN. And after flash, reboot into stock recovery and wipe data or else you will get a bootloop.
Click to expand...
Click to collapse
I have downloaded the Latest Indian 4.2.2 update. Can anyone plz let me know how update this whole filmware by Odin
satyajit2412 said:
I have downloaded the Latest Indian 4.2.2 update. Can anyone plz let me know how update this whole filmware by Odin
Click to expand...
Click to collapse
Click PDA section. Only have 1 file right?
satyajit2412 said:
I have downloaded the Latest Indian 4.2.2 update. Can anyone plz let me know how update this whole filmware by Odin
Click to expand...
Click to collapse
See instructions here - http://forum.xda-developers.com/showpost.php?p=45340455&postcount=3
neawasthi said:
See instructions here - http://forum.xda-developers.com/showpost.php?p=45340455&postcount=3
Click to expand...
Click to collapse
Thanks guys. I have successfully updated my phone
I rooted p607t after I failed to read it would kill my spen then I reverted to stock still no spen.
snipestech said:
I rooted p607t after I failed to read it would kill my spen then I reverted to stock still no spen.
Click to expand...
Click to collapse
How did you revert to stock? using odin and full factory firmware? If you root with towelroot Spen should works, if you use other method (cfroot etc..) Spen will not works. Also did you flash twrp recovery also? if yes what version?
Odin 3.09 and full stock from sammobile. (highlighted in the picture) I don't use it much but still it's driving me nuts.
snipestech said:
Odin 3.09 and full stock from sammobile. (highlighted in the picture) I don't use it much but still it's driving me nuts.
Click to expand...
Click to collapse
Try this method wrote by law16 (credit to him)
Download this twrp onto internal storage and then flashed.
https://www.dropbox.com/s/9i4z9gpfn5...3ltexx-4.4.img
as for spen i was actually able to re-enable by first flashing this recovery
then flashing the TW ROM for p605 (required as it need a dialer)
applied wacom update *#2663#
Good luck!
buhohitr said:
Try this method wrote by law16 (credit to him)
Download this twrp onto internal storage and then flashed.
https://www.dropbox.com/s/9i4z9gpfn5...3ltexx-4.4.img
as for spen i was actually able to re-enable by first flashing this recovery
then flashing the TW ROM for p605 (required as it need a dialer)
applied wacom update *#2663#
Good luck!
Click to expand...
Click to collapse
The link is dead.
What twrp recovery are you using ?
Ok so how is this flashed ?
As an update on root of internal storage?
Also do you have a link to download that rom ?
snipestech said:
The link is dead.
What twrp recovery are you using ?
Ok so how is this flashed ?
As an update on root of internal storage?
Also do you have a link to download that rom ?
Click to expand...
Click to collapse
http://techerrata.com/file/twrp2/lt03ltexx/openrecovery-twrp-2.7.1.1-lt03ltexx-4.4.img.tar
buhohitr said:
http://techerrata.com/file/twrp2/lt03ltexx/openrecovery-twrp-2.7.1.1-lt03ltexx-4.4.img.tar
Click to expand...
Click to collapse
Thanks, I take it that is flashed via odin ?
Can you please direct me to the link of the the rom ?
snipestech said:
Thanks, I take it that is flashed via odin ?
Can you please direct me to the link of the the rom ?
Click to expand...
Click to collapse
I assumed that you're on stock rom. First use towelroot to root your device, verify you have root, then use Odin to flash the recovery zip. Boot up and check to see if spen is working, if not, then proceed to the dial number to update the Wacom driver for Spen.
buhohitr said:
I assumed that you're on stock rom. First use towelroot to root your device, verify you have root, then use Odin to flash the recovery zip. Boot up and check to see if spen is working, if not, then proceed to the dial number to update the Wacom driver for Spen.
Click to expand...
Click to collapse
Ok but stock does not have a dialer.
snipestech said:
Ok but stock does not have a dialer.
Click to expand...
Click to collapse
This seems to have a dialer can flash it ?
snipestech said:
This seems to have a dialer can flash it ?
Click to expand...
Click to collapse
which one?? p605? yes or german firmware should have dialer also.
buhohitr said:
which one?? p605? yes or german firmware should have dialer also.
Click to expand...
Click to collapse
I was thinking this one but theres no way to download it damn.
http://www.stockyrom.de/p605/?lang=en
Solved after unrooting, I used towel root flashed twrp 2.7 and then flashed aokp dialer was fcing then flashed cm11 did the *#2663# got an error and then flashed revolution 2.0 HD pen is working flawlessly. Thanks for your help!
I've installed this rom and I have many problems with it
when I flashed any update my note starts to reboot by itself.
How can I fix That?
Veras07 said:
I've installed this rom and I have many problems with it
when I flashed any update my note starts to reboot by itself.
How can I fix That?
Click to expand...
Click to collapse
Did you flash the entire file? There are usually two. The full rom and then updates to the rom. I would check in his thread to see what happened.
Also clearing the cache can help with the boot process
fogame said:
Did you flash the entire file? There are usually two. The full rom and then updates to the rom. I would check in his thread to see what happened.
Also clearing the cache can help with the boot process
Click to expand...
Click to collapse
I did everything, but the problem begins when I install the updates.
If I only install v5, my note doesn't reboot by itself.
Gotta ask what was your process for flashing 5.0 did you wipe x3 and format data x3 that is what I normally do Im playing with mods right now but have been running 5.0.3 for a couple of days with no reboots actually never got any reboots while on DomPop
What Baseband and Modem are you running download the systeminfo app from playstore and it should tell you if you are unsure.
sawixso81 said:
Gotta ask what was your process for flashing 5.0 did you wipe x3 and format data x3 that is what I normally do Im playing with mods right now but have been running 5.0.3 for a couple of days with no reboots actually never got any reboots while on DomPop
What Baseband and Modem are you running download the systeminfo app from playstore and it should tell you if you are unsure.
Click to expand...
Click to collapse
OK, I've solved the problem.
I updated the Baseband and bootloader, now everything works fine.
Thanks a lot.
Veras07 said:
OK, I've solved the problem.
I updated the Baseband and bootloader, now everything works fine.
Thanks a lot.
Click to expand...
Click to collapse
How did you update the baseband and bootloader? Mines doing the exact same thing
G2blkteg said:
How did you update the baseband and bootloader? Mines doing the exact same thing
Click to expand...
Click to collapse
I used Odin v3.10.6 to flash T-Mobile 5.0 stock rom, but I modified Odin to can update the baseband and bootloader.
Veras07 said:
I used Odin v3.10.6 to flash T-Mobile 5.0 stock rom, but I modified Odin to can update the baseband and bootloader.
Click to expand...
Click to collapse
Thanks... Wasnt sure if i should have done N900TUVUDNK3 4.4.2 or 5.0... So there's obviously a root for stock 5.0 correct?
Veras07 said:
I used Odin v3.10.6 to flash T-Mobile 5.0 stock rom, but I modified Odin to can update the baseband and bootloader.
Click to expand...
Click to collapse
As I have understood, you can only update the baseband and bootloader through ota. I Flashed the rom twice, the first time only the system was updated but no the baseband, the second did the modification of odin and everything went perfect.
G2blkteg said:
Thanks... Wasnt sure if i should have done N900TUVUDNK3 4.4.2 or 5.0... So there's obviously a root for stock 5.0 correct?
Click to expand...
Click to collapse
I was on N900TUVUDNK3 baseband, installed the stock rom, after that Flashed twrp recovery via Odin, and finally Flashed DomPop v5.0 and updates.
Veras07 said:
I was on N900TUVUDNK3 baseband, installed the stock rom, after that Flashed twrp recovery via Odin, and finally Flashed DomPop v5.0 and updates.
Click to expand...
Click to collapse
So how did you modify odin to update the baseband and bootloader?
G2blkteg said:
So how did you modify odin to update the baseband and bootloader?
Click to expand...
Click to collapse
Download Odin v3.10.6 from this link http://forum.xda-developers.com/showthread.php?t=2711451, unzip and search for the odin3.ini file, open it and modify this two lines:
PhoneEFSClear=0
PhoneBootUpdate=0k
Change the first from 0 to 1 if you want to do a factory reset when you install the rom
Change the second one from OK to 1 to Odin update the baseband and bootloader automatically. After that open Odin, connect your note on download mode and install the rom.
Veras07 said:
Download Odin v3.10.6 from this link http://forum.xda-developers.com/showthread.php?t=2711451, unzip and search for the odin3.ini file, open it and modify this two lines:
PhoneEFSClear=0
PhoneBootUpdate=0k
Change the first from 0 to 1 if you want to do a factory reset when you install the rom
Change the second one from OK to 1 to Odin update the baseband and bootloader automatically. After that open Odin, connect your note on download mode and install the rom.
Click to expand...
Click to collapse
Ill give it a shot... Thanks.... Now another question.. What did you use to root 5.0?
G2blkteg said:
Ill give it a shot... Thanks.... Now another question.. What did you use to root 5.0?
Click to expand...
Click to collapse
You don't need to root stock rom. Download openrecovery-twrp-2.8.0.1-hltetmo-4.4.zip from Google and install via Odin, after that you only have to reboot into the twrp recovery and install the DomPop rom.
This rom comes rooted.
Veras07 said:
You don't need to root stock rom. Download openrecovery-twrp-2.8.0.1-hltetmo-4.4.zip from Google and install via Odin, after that you only have to reboot into the twrp recovery and install the DomPop rom.
This rom comes rooted.
Click to expand...
Click to collapse
Oohhhhh thanks man... I appreciate that... I always thought i had to root first before i can flash a recovery... Good to know... Im downloading what i need now.... Now i wish the dompop had unlimited tethering lol
G2blkteg said:
Oohhhhh thanks man... I appreciate that... I always thought i had to root first before i can flash a recovery... Good to know... Im downloading what i need now.... Now i wish the dompop had unlimited tethering lol
Click to expand...
Click to collapse
About the unlimited tethering I don't know.
Veras07 said:
About the unlimited tethering I don't know.
Click to expand...
Click to collapse
One last thing... What file did you use for 5.0? Ive seen a few... Was it 1.4gb?
G2blkteg said:
One last thing... What file did you use for 5.0? Ive seen a few... Was it 1.4gb?
Click to expand...
Click to collapse
That's the correct file.
Veras07 said:
That's the correct file.
Click to expand...
Click to collapse
Ok last thing.. Do i place the file in BL, AP, CP, or CSC in odin?
G2blkteg said:
Ok last thing.. Do i place the file in BL, AP, CP, or CSC in odin?
Click to expand...
Click to collapse
Place the file on AP
I am not responsible for bricked devices
Software info:
STOCK - not rooted
Android-version: 5.0.2
Software-number: 2.19.401.1
Kernel-version: 3.4.0
Europe Version
Odexed
Click to expand...
Click to collapse
Download
Click to expand...
Click to collapse
How to flash this rom:
If you haven't already: upgrade your Firmware, Thread @condi for Lollipop
[*]If you haven't already: Unlock device and flash a custom recovery
Download the rom.zip and put it to your device storage
Flash it via recovery
Click to expand...
Click to collapse
Thanks for the post, especially including flashable firmware. Has anyone with US ATT model tried this yet? Do you know where I can find US 4.4.4 firmware to go back if needed? I have searched, but no luck on this apparently orphaned device.
kcteun said:
Thanks for the post, especially including flashable firmware. Has anyone with US ATT model tried this yet? Do you know where I can find US 4.4.4 firmware to go back if needed? I have searched, but no luck on this apparently orphaned device.
Click to expand...
Click to collapse
Not sure where to find a branding specific firmware, sorry.
kcteun said:
Thanks for the post, especially including flashable firmware. Has anyone with US ATT model tried this yet? Do you know where I can find US 4.4.4 firmware to go back if needed? I have searched, but no luck on this apparently orphaned device.
Click to expand...
Click to collapse
The firmware in the first post works good but you have to take the radio out of it or it will break your wireless connection with att.. I know from first hand experience ?
Please tell me where I can get stock 5.0.2 recovery to flash after flashing this rom to lock bootloader and get back to full stock and to be able to receive OTAs?
NoXXX said:
Please tell me where I can get stock 5.0.2 recovery to flash after flashing this rom to lock bootloader and get back to full stock and to be able to receive OTAs?
Click to expand...
Click to collapse
There you go: https://www.androidfilehost.com/?fid=24052804347812147
I have extracted this recovery from the stock ota update for 2.19.401.1
zFr3eak said:
There you go: https://www.androidfilehost.com/?fid=24052804347812147
I have extracted this recovery from the stock ota update for 2.19.401.1
Click to expand...
Click to collapse
Is it ok that after flashing the ROM and the stock recovery I have "Software status MODIFIED?" Is it ok to lock bootloader?
NoXXX said:
Is it ok that after flashing the ROM and the stock recovery I have "Software status MODIFIED?" Is it ok to lock bootloader?
Click to expand...
Click to collapse
Yes this is normal.
i need stock boot recovery can u please upload it....?
thanks in advance
armaankhan354 said:
i need stock boot recovery can u please upload it....?
thanks in advance
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24052804347812147
zFr3eak said:
https://www.androidfilehost.com/?fid=24052804347812147
Click to expand...
Click to collapse
Its the recovery file if i m not wrong....the boot file is in the same file sir...?
armaankhan354 said:
Its the recovery file if i m not wrong....the boot file is in the same file sir...?
Click to expand...
Click to collapse
the boot file is included in the rom...
What will happen if I flash this on an ATT version of Desire Eye? It's now sim unlocked and being used in europe(so problems with the ATT carrier, frequencies, etc dont matter), and I would like to get a cleaner android ATT version is full of ****. Will there be a problem?
Thanks!
If i flash this will i get OTA updates
Hi to all . I have one big problem which causes me to cant flash ota i use stock 4.4.4 recovery i relocked mu bootloader but in software status it shows modified so when i try to update my phone it boots in to recovery but then it turns to a red triangle . Can anyone help me
Hi all! Thank you for this post because it was useful to me.
I have the htc desire eye and I have well flash this rom stock via twrp 2.8 on my eye and must say that Rom works very well. The only concern I have is when I try to do a software update; It finds an update, downloads it but it can not install it. It displays the following error message: "It seems that you are using a modified version of htc software then for your security we can not install the update."
So please, could anyone help me ??
Thank you!