I rooted p607t after I failed to read it would kill my spen then I reverted to stock still no spen.
snipestech said:
I rooted p607t after I failed to read it would kill my spen then I reverted to stock still no spen.
Click to expand...
Click to collapse
How did you revert to stock? using odin and full factory firmware? If you root with towelroot Spen should works, if you use other method (cfroot etc..) Spen will not works. Also did you flash twrp recovery also? if yes what version?
Odin 3.09 and full stock from sammobile. (highlighted in the picture) I don't use it much but still it's driving me nuts.
snipestech said:
Odin 3.09 and full stock from sammobile. (highlighted in the picture) I don't use it much but still it's driving me nuts.
Click to expand...
Click to collapse
Try this method wrote by law16 (credit to him)
Download this twrp onto internal storage and then flashed.
https://www.dropbox.com/s/9i4z9gpfn5...3ltexx-4.4.img
as for spen i was actually able to re-enable by first flashing this recovery
then flashing the TW ROM for p605 (required as it need a dialer)
applied wacom update *#2663#
Good luck!
buhohitr said:
Try this method wrote by law16 (credit to him)
Download this twrp onto internal storage and then flashed.
https://www.dropbox.com/s/9i4z9gpfn5...3ltexx-4.4.img
as for spen i was actually able to re-enable by first flashing this recovery
then flashing the TW ROM for p605 (required as it need a dialer)
applied wacom update *#2663#
Good luck!
Click to expand...
Click to collapse
The link is dead.
What twrp recovery are you using ?
Ok so how is this flashed ?
As an update on root of internal storage?
Also do you have a link to download that rom ?
snipestech said:
The link is dead.
What twrp recovery are you using ?
Ok so how is this flashed ?
As an update on root of internal storage?
Also do you have a link to download that rom ?
Click to expand...
Click to collapse
http://techerrata.com/file/twrp2/lt03ltexx/openrecovery-twrp-2.7.1.1-lt03ltexx-4.4.img.tar
buhohitr said:
http://techerrata.com/file/twrp2/lt03ltexx/openrecovery-twrp-2.7.1.1-lt03ltexx-4.4.img.tar
Click to expand...
Click to collapse
Thanks, I take it that is flashed via odin ?
Can you please direct me to the link of the the rom ?
snipestech said:
Thanks, I take it that is flashed via odin ?
Can you please direct me to the link of the the rom ?
Click to expand...
Click to collapse
I assumed that you're on stock rom. First use towelroot to root your device, verify you have root, then use Odin to flash the recovery zip. Boot up and check to see if spen is working, if not, then proceed to the dial number to update the Wacom driver for Spen.
buhohitr said:
I assumed that you're on stock rom. First use towelroot to root your device, verify you have root, then use Odin to flash the recovery zip. Boot up and check to see if spen is working, if not, then proceed to the dial number to update the Wacom driver for Spen.
Click to expand...
Click to collapse
Ok but stock does not have a dialer.
snipestech said:
Ok but stock does not have a dialer.
Click to expand...
Click to collapse
This seems to have a dialer can flash it ?
snipestech said:
This seems to have a dialer can flash it ?
Click to expand...
Click to collapse
which one?? p605? yes or german firmware should have dialer also.
buhohitr said:
which one?? p605? yes or german firmware should have dialer also.
Click to expand...
Click to collapse
I was thinking this one but theres no way to download it damn.
http://www.stockyrom.de/p605/?lang=en
Solved after unrooting, I used towel root flashed twrp 2.7 and then flashed aokp dialer was fcing then flashed cm11 did the *#2663# got an error and then flashed revolution 2.0 HD pen is working flawlessly. Thanks for your help!
Related
I am unable to install cwm recovery on stock 4.3.
please guide me step by step..
or please upload a video please. ..
I tried different different methods but could not able to complete the job.
My knox warranty shows void, but phones status shows official and counter shows 10...
please help me.. devolopers..
I'm in the same boat, having unwittingly taken the OTA update to 4.3. The long and short answer is that our boot loader is locked; we can not install another recovery (CWM, TWRP, whatever) unless an exploit is found.
So far, the general consensus seems to be that that isn't possible.
can we Downgrade from 4.3 T0 4.1.2 And After that we can 9h stay prerooted 4.3 firmware?
hellmainia said:
can we Downgrade from 4.3 T0 4.1.2 And After that we can 9h stay prerooted 4.3 firmware?
Click to expand...
Click to collapse
The new bootloader does not allow one to downgrade. So, you cannot. Im from India too, and I too have the new bootloader. However, I have installed a custom recovery and im switching ROMs easily. My status says 'custom', and the custom binary download says '3 counts'. Does that mean when the counter clocks '10', its an end for flashers? Please provide a pic of your download mode screen and attach here for further reference..
Regards
Varun
Paul013 said:
The new bootloader does not allow one to downgrade. So, you cannot. Im from India too, and I too have the new bootloader. However, I have installed a custom recovery and im switching ROMs easily. My status says 'custom', and the custom binary download says '3 counts'. Does that mean when the counter clocks '10', its an end for flashers? Please provide a pic of your download mode screen and attach here for further reference..
Regards
Varun
Click to expand...
Click to collapse
10 doesn't means to the .
I want to say I am unable to install cwm recovery on my stock 4.3
hellmainia said:
10 doesn't means to the .
I want to say I am unable to install cwm recovery on my stock 4.3
Click to expand...
Click to collapse
What I did when I was on stock was, I flashed cf-root first. Then I flashed twrp via odin. You can also try a newer odin version. The latest is 3.09.
Paul013 said:
What I did when I was on stock was, I flashed cf-root first. Then I flashed twrp via odin. You can also try a newer odin version. The latest is 3.09.
Click to expand...
Click to collapse
U flashed cf root on 4.3 0r 4.1.2
hellmainia said:
U flashed cf root on 4.3 0r 4.1.2
Click to expand...
Click to collapse
You can flash cf-root on 4.3 then boot and go to playstore update supersu and open. It will display a message if you want to update the binarys hit the normal way and then hit disable knox.
Then you can flash your recovery
MU24R said:
You can flash cf-root on 4.3 then boot and go to playstore update supersu and open. It will display a message if you want to update the binarys hit the normal way and then hit disable knox.
Then you can flash your recovery
Click to expand...
Click to collapse
Oky thanks
but can you give me link for cf root thread.
Google cf autoroot
Enviado desde mi Galaxy Note II usando Tapatalk 2
hellmainia said:
Oky thanks
but can you give me link for cf root thread.
Click to expand...
Click to collapse
Tutorial+Download- http://forum.xda-developers.com/showthread.php?t=2143479
Select your model carefully!
Good luck.
I cannot use screen mirroring keep getting a message that says Unable to start Screen Mirroring because of a hardware issue
any help is appreciated thanks
A152394 said:
I cannot use screen mirroring keep getting a message that says Unable to start Screen Mirroring because of a hardware issue
any help is appreciated thanks
Click to expand...
Click to collapse
You're rooted and using a custom recovery, right?
blindmanpb said:
You're rooted and using a custom recovery, right?
Click to expand...
Click to collapse
Yes that is correct
A152394 said:
Yes that is correct
Click to expand...
Click to collapse
That's why, then.
Flash stock recovery and that should restore screen mirroring.
blindmanpb said:
That's why, then.
Flash stock recovery and that should restore screen mirroring.
Click to expand...
Click to collapse
Where do I get stock recovery from?
blindmanpb said:
That's why, then.
Flash stock recovery and that should restore screen mirroring.
Click to expand...
Click to collapse
Thanks but it didn't work for me...
Anybody have any ideas?
whatllitbenext said:
Thanks but it didn't work for me...
Anybody have any ideas?
Click to expand...
Click to collapse
If your'e on Android 4.3, use this:
http://forum.xda-developers.com/showthread.php?t=2556527
On Android 4.4. it works fine for me, I use it all the time, hope I helped :good:
22sl22 said:
If your'e on Android 4.3, use this:
http://forum.xda-developers.com/showthread.php?t=2556527
On Android 4.4. it works fine for me, I use it all the time, hope I helped :good:
Click to expand...
Click to collapse
Thanks but my GN2 is on 4.3 (Jedi X2 Rom) and it's got not problem mirroring.
It's my GN10.1-2014Ed. on 4.4.2 (Hyperdrive RLS 3.1) that's not connecting...
whatllitbenext said:
Thanks but my GN2 is on 4.3 (Jedi X2 Rom) and it's got not problem mirroring.
It's my GN10.1-2014Ed. on 4.4.2 (Hyperdrive RLS 3.1) that's not connecting...
Click to expand...
Click to collapse
For me, the only that worked:
- once rooted, make sure you get both current status and version (to be checked in download mode) as OFFICIAL (you can use Xposed or similar to do this, different threads can be found on this)
- flash with stock recovery
Hope this can help you as well...
jeje2 said:
For me, the only that worked:
- once rooted, make sure you get both current status and version (to be checked in download mode) as OFFICIAL (you can use Xposed or similar to do this, different threads can be found on this)
- flash with stock recovery
Hope this can help you as well...
Click to expand...
Click to collapse
Thanks @jeje2.
In Xposed I found system status under "Security Hacks" but couldn't find where to change version? Would you please let me know?
Thanks!
whatllitbenext said:
Thanks @jeje2.
In Xposed I found system status under "Security Hacks" but couldn't find where to change version? Would you please let me know?
Thanks!
Click to expand...
Click to collapse
You should try to go over specific Mode / Module (not sure about the English translation). To do this:
- Install Xposed Installer (or similar mode xposed mode installer)
- In Xposed Installer, download the mode "Cosmetics Device Status Normal Modification"
- Then, in the mode menu, select ComesticSysScopeNormalizer (or something that looks like this...) to activate
Restart, flash stock recovery, boot in recovery mode... and cross fingers!
Hope this will work
Best,
Sorry if this is too simple, just afraid of the bricking with Knox, etc. Which Stock Recovery do I use with KitKat after rooting?
Thanks!
offtohavasu said:
Sorry if this is too simple, just afraid of the bricking with Knox, etc. Which Stock Recovery do I use with KitKat after rooting?
Thanks!
Click to expand...
Click to collapse
This one should be fine http://forum.xda-developers.com/showthread.php?t=2727607
jeje2 said:
This one should be fine http://forum.xda-developers.com/showthread.php?t=2727607
Click to expand...
Click to collapse
Worked perfect. Back to screen mirroring!
offtohavasu said:
Worked perfect. Back to screen mirroring!
Click to expand...
Click to collapse
Really happy it did and hopefully it will help some others, I have spent days trying to sort this out
not a rooted device
My tablet isn't rooted & I don't want to root it because it will violate my warranty so is there any other way to get the screen mirroring to work without rooting my device?
sweetthing4523 said:
My tablet isn't rooted & I don't want to root it because it will violate my warranty so is there any other way to get the screen mirroring to work without rooting my device?
Click to expand...
Click to collapse
Normally it should work until you flash a custom recovery. But in this case you already set the knox flag. So, it doesn't matter if you are also rooted or not.
For whom it not worked:
After flashing the stock recovery boot once into recovery mode. For some this helps.
Mine's stock unrooted and i get that error too.
I've installed this rom and I have many problems with it
when I flashed any update my note starts to reboot by itself.
How can I fix That?
Veras07 said:
I've installed this rom and I have many problems with it
when I flashed any update my note starts to reboot by itself.
How can I fix That?
Click to expand...
Click to collapse
Did you flash the entire file? There are usually two. The full rom and then updates to the rom. I would check in his thread to see what happened.
Also clearing the cache can help with the boot process
fogame said:
Did you flash the entire file? There are usually two. The full rom and then updates to the rom. I would check in his thread to see what happened.
Also clearing the cache can help with the boot process
Click to expand...
Click to collapse
I did everything, but the problem begins when I install the updates.
If I only install v5, my note doesn't reboot by itself.
Gotta ask what was your process for flashing 5.0 did you wipe x3 and format data x3 that is what I normally do Im playing with mods right now but have been running 5.0.3 for a couple of days with no reboots actually never got any reboots while on DomPop
What Baseband and Modem are you running download the systeminfo app from playstore and it should tell you if you are unsure.
sawixso81 said:
Gotta ask what was your process for flashing 5.0 did you wipe x3 and format data x3 that is what I normally do Im playing with mods right now but have been running 5.0.3 for a couple of days with no reboots actually never got any reboots while on DomPop
What Baseband and Modem are you running download the systeminfo app from playstore and it should tell you if you are unsure.
Click to expand...
Click to collapse
OK, I've solved the problem.
I updated the Baseband and bootloader, now everything works fine.
Thanks a lot.
Veras07 said:
OK, I've solved the problem.
I updated the Baseband and bootloader, now everything works fine.
Thanks a lot.
Click to expand...
Click to collapse
How did you update the baseband and bootloader? Mines doing the exact same thing
G2blkteg said:
How did you update the baseband and bootloader? Mines doing the exact same thing
Click to expand...
Click to collapse
I used Odin v3.10.6 to flash T-Mobile 5.0 stock rom, but I modified Odin to can update the baseband and bootloader.
Veras07 said:
I used Odin v3.10.6 to flash T-Mobile 5.0 stock rom, but I modified Odin to can update the baseband and bootloader.
Click to expand...
Click to collapse
Thanks... Wasnt sure if i should have done N900TUVUDNK3 4.4.2 or 5.0... So there's obviously a root for stock 5.0 correct?
Veras07 said:
I used Odin v3.10.6 to flash T-Mobile 5.0 stock rom, but I modified Odin to can update the baseband and bootloader.
Click to expand...
Click to collapse
As I have understood, you can only update the baseband and bootloader through ota. I Flashed the rom twice, the first time only the system was updated but no the baseband, the second did the modification of odin and everything went perfect.
G2blkteg said:
Thanks... Wasnt sure if i should have done N900TUVUDNK3 4.4.2 or 5.0... So there's obviously a root for stock 5.0 correct?
Click to expand...
Click to collapse
I was on N900TUVUDNK3 baseband, installed the stock rom, after that Flashed twrp recovery via Odin, and finally Flashed DomPop v5.0 and updates.
Veras07 said:
I was on N900TUVUDNK3 baseband, installed the stock rom, after that Flashed twrp recovery via Odin, and finally Flashed DomPop v5.0 and updates.
Click to expand...
Click to collapse
So how did you modify odin to update the baseband and bootloader?
G2blkteg said:
So how did you modify odin to update the baseband and bootloader?
Click to expand...
Click to collapse
Download Odin v3.10.6 from this link http://forum.xda-developers.com/showthread.php?t=2711451, unzip and search for the odin3.ini file, open it and modify this two lines:
PhoneEFSClear=0
PhoneBootUpdate=0k
Change the first from 0 to 1 if you want to do a factory reset when you install the rom
Change the second one from OK to 1 to Odin update the baseband and bootloader automatically. After that open Odin, connect your note on download mode and install the rom.
Veras07 said:
Download Odin v3.10.6 from this link http://forum.xda-developers.com/showthread.php?t=2711451, unzip and search for the odin3.ini file, open it and modify this two lines:
PhoneEFSClear=0
PhoneBootUpdate=0k
Change the first from 0 to 1 if you want to do a factory reset when you install the rom
Change the second one from OK to 1 to Odin update the baseband and bootloader automatically. After that open Odin, connect your note on download mode and install the rom.
Click to expand...
Click to collapse
Ill give it a shot... Thanks.... Now another question.. What did you use to root 5.0?
G2blkteg said:
Ill give it a shot... Thanks.... Now another question.. What did you use to root 5.0?
Click to expand...
Click to collapse
You don't need to root stock rom. Download openrecovery-twrp-2.8.0.1-hltetmo-4.4.zip from Google and install via Odin, after that you only have to reboot into the twrp recovery and install the DomPop rom.
This rom comes rooted.
Veras07 said:
You don't need to root stock rom. Download openrecovery-twrp-2.8.0.1-hltetmo-4.4.zip from Google and install via Odin, after that you only have to reboot into the twrp recovery and install the DomPop rom.
This rom comes rooted.
Click to expand...
Click to collapse
Oohhhhh thanks man... I appreciate that... I always thought i had to root first before i can flash a recovery... Good to know... Im downloading what i need now.... Now i wish the dompop had unlimited tethering lol
G2blkteg said:
Oohhhhh thanks man... I appreciate that... I always thought i had to root first before i can flash a recovery... Good to know... Im downloading what i need now.... Now i wish the dompop had unlimited tethering lol
Click to expand...
Click to collapse
About the unlimited tethering I don't know.
Veras07 said:
About the unlimited tethering I don't know.
Click to expand...
Click to collapse
One last thing... What file did you use for 5.0? Ive seen a few... Was it 1.4gb?
G2blkteg said:
One last thing... What file did you use for 5.0? Ive seen a few... Was it 1.4gb?
Click to expand...
Click to collapse
That's the correct file.
Veras07 said:
That's the correct file.
Click to expand...
Click to collapse
Ok last thing.. Do i place the file in BL, AP, CP, or CSC in odin?
G2blkteg said:
Ok last thing.. Do i place the file in BL, AP, CP, or CSC in odin?
Click to expand...
Click to collapse
Place the file on AP
Cwm, kernel and root files is ready Check this posts:
Cwm
Kernel & Root
Nada
bodyzen said:
Nada
Click to expand...
Click to collapse
Pizdec kak nada)))))
Mr. Chainfire maid the last one,but this is just a hobby for him soo... let's hope that he will get a bit bored soon
So after we get a recovery we could root our neos by flashing superuser.zip v 2.46... just wait till there is twrp
Twrp is already here, just download it from the official website and flash it trough Odin. As of supersu, I tried to flash the latest beta, but it got me into a bootloop.
TWRP is working with 5.1.1 and our 7505 ?
Deltastylez said:
Twrp is already here, just download it from the official website and flash it trough Odin. As of supersu, I tried to flash the latest beta, but it got me into a bootloop.
Click to expand...
Click to collapse
Sent from my V4S using XDA Free mobile app
full2000 said:
TWRP is working with 5.1.1 and our 7505 ?
Click to expand...
Click to collapse
Yes, just to as i told
TWRP > https://dl.twrp.me/hlltexx/twrp-2.8.7.0-hlltexx-4.4.img.tar
Just flash this trough odin.
tip : disable auto-reboot in Odin.
Deltastylez said:
Yes, just to as i told
TWRP > https://dl.twrp.me/hlltexx/twrp-2.8.7.0-hlltexx-4.4.img.tar
Just flash this trough odin.
tip : disable auto-reboot in Odin.
Click to expand...
Click to collapse
Bro it says its for 4.4 look at the last letters of the file name... if you say it is working than can u send SS or someone other to confirm? Flash this via twrp in order to get root premission
timuralaskara said:
Bro it says its for 4.4 look at the last letters of the file name... if really work than i will try to port it n7505 so anyone can confiirm working on n750 at least
Click to expand...
Click to collapse
You don't have t port anything. It works, I did flash it by myself .
Mr Chainfire doesn't make superuser for any samsung 5.1.1 devices because kernel is selinux enforcing(always block root) we need to make root compatible kernel and flash with cwm
Mr.Bola said:
Mr Chainfire doesn't make superuser for any samsung 5.1.1 devices because kernel is selinux enforcing(always block root) we need to make root compatible kernel and flash with cwm
Click to expand...
Click to collapse
ok this will be hard... ther isnt cf-autoroot and the superSU.zip causes bootloop. Did anyone smth like kernel modding?... isnt there any other way.??..
btw recovery is working fine i will try to port some Galaxy A8 apps (flashable in zip since there isnt any other option to replace apk without root) lets see....
bubenking said:
ok this will be hard... ther isnt cf-autoroot and the superSU.zip causes bootloop. Did anyone smth like kernel modding?... isnt there any other way.??..
btw recovery is working fine i will try to port some Galaxy A8 apps (flashable in zip since there isnt any other option to replace apk without root) lets see....
Click to expand...
Click to collapse
how will u get the base apks without root? from odin package?
bubenking said:
ok this will be hard... ther isnt cf-autoroot and the superSU.zip causes bootloop. Did anyone smth like kernel modding?... isnt there any other way.??..
btw recovery is working fine i will try to port some Galaxy A8 apps (flashable in zip since there isnt any other option to replace apk without root) lets see....
Click to expand...
Click to collapse
I will search another root ways. Twrp work n750 or n7505?
Mr.Bola said:
I will search another root ways. Twrp work n750 or n7505?
Click to expand...
Click to collapse
i have the n7505 but it should also work for n750 if u select the last one for n750 4.4
timuralaskara said:
i have the n7505 but it should also work for n750 if u select the last one for n750 4.4
Click to expand...
Click to collapse
When I flashed twrp-2.8.7.0-hlltexx-4.4.img with odin 3.09, I have this error text 'recovery is not seandroid enforcing' on left side and opened to stock recovery :/
Edit: When disabled auto-reboot in Odin, it work
Mr.Bola said:
When I flashed twrp-2.8.7.0-hlltexx-4.4.img with odin 3.09, I have this error text 'recovery is not seandroid enforcing' on left side and opened to stock recovery :/
Edit: When disabled auto-reboot in Odin, it work
Click to expand...
Click to collapse
cool bro i am now about making a systemdump will also upload the kernel when its done but upload speed is slow lol
edit systemdump successfully done
now uploading
will open new thread when its uploadad
Did someone found a way to root it?
ok i know what we have to do in order to get a rootable kernel:
we need to build a kernel with selinux permissive mode instead of enforcing mode
i am downloading the kernel sources for n7505 LP ~150mb 15kb/s server
found this cool guide http://graemehill.ca/compiling-permissive-android-kernel/ which looks simple
so if this will work we will get root before end of 2015
I have a rooted Honor 8 pro (DUK-L09C675B130), with an update in queue but everytime I download the update the phone boots into TWRP and it is not able to flash it. I searched for threads to unroot the phone (or get the old recovery) but I didn't find any solid answer. Also, when I try to enter recovery using the button combination Huawei E recovery shows up instead of TWRP. And TWRP is unable to flash anything, be it an official update or custom files. Any kind of assistance is appreciated. Thank you!
You have SuerSU or magisk?!
PalakMi said:
You have SuerSU or magisk?!
Click to expand...
Click to collapse
I have phh's SuperUser.
devilrulz4ever said:
I have phh's SuperUser.
Click to expand...
Click to collapse
Can you try to reflash your firmware to reset everything?
sniperlife:D said:
Can you try to reflash your firmware to reset everything?
Click to expand...
Click to collapse
From where do i get the firmware?
Most firmwares I saw here are for other build numbers.
devilrulz4ever said:
From where do i get the firmware?
Most firmwares I saw here are for other build numbers.
Click to expand...
Click to collapse
I just checked. You're right. Can't find it too.