How To install Cygwin And Use Splitfus2
You can download any stock rom package for galaxy y from Sammobile and use Splitfus2 to split it into odin flashable parts
Skip how to install Cygwin if you already have it set up but if you run into problems later come back to this and set up Cygwin again properly
How to install Cygwin Properly
uninstall any version of Cygwin you currently have installed
now install Java SE Development Kit 7 from here
now download the 32bit x86 version of Cygwin from here
Run the setup and make sure you install all the packages by clicking the arrow at the top that changes everything from default to install all
Make sure you have selected the root of your harddrive to install it in Cygwin folder for eg c:\cygwin
Now you can install cygwin
For detailed video instructions watch http://www.youtube.com/watch?feature=player_embedded&v=sYJMdHPD410 (skip the bit at end about setting up kitchen - you just want Cygwin)
How To Install Splitfus2 And Run It
Download Splitfus2 attachment
now navigate to C:\cygwin\home\your username
create a folder called splitfus
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
unzip the Splitfus2 zip and place the containing splitfus2.exe and _base folder in the splitfus folder
place the stock firmware you want to split also in the splitfus folder
run Cygwin
type cd splitfus
now type ls
type ./splitfus2.exe -w S5360nameofyour firmware (note to make it easier just type S5360 then press the tab key and it will auto compleate - also note it is case sensitive and it starts dot then a forward slash)
now your firmware will be split and output in a zip file to your splitfus folder
unzip and use in odin
You can find already split firmware and links to dokys original threads here
Supported Models
B5510
S3300
S5360
S5360B
S5360L
S5360T
S5363
S5369
S5570I
S5830i
S6102
credits
doky for splitfus2
gitagaire for youtube video
Added Info!!
I have made a video on how to setup Cygwin Kitchen on linux in less than a minute.
Here's the link to the video: http://www.youtube.com/watch?v=Z45ocbB7e24
I have mentioned everything in detail in the description of the video.
Maybe you can add it if you find it useful!
the_pirate_predator said:
I have made a video on how to setup Cygwin Kitchen on linux in less than a minute.
Here's the link to the video: http://www.youtube.com/watch?v=Z45ocbB7e24
I have mentioned everything in detail in the description of the video.
Maybe you can add it if you find it useful!
Click to expand...
Click to collapse
this thread is for using splitfus2
if you had the splitfus2 linux version and guide I could add it to this thread
by all means create a seperate thread for setting up kitchen on linux
just as a note Cygwin is a linux terminal emulator for windows - its not for linux
Thanks
Thanks for correcting my mistake!
I found that sir Doky has already made a tutorial: http://forum.xda-developers.com/showpost.php?p=25130022&postcount=2
the_pirate_predator said:
Thanks for correcting my mistake!
I found that sir Doky has already made a tutorial: http://forum.xda-developers.com/showpost.php?p=25130022&postcount=2
Click to expand...
Click to collapse
thats ok - I recreated tutorials in a simple step by step form and also reuploaded files as the files on dokys threads now no longer work due to hotfile being closed down
splitting s5839i
hi,
i'm trying to split the latest UK galaxy ace firmware: S5839iBUMG1_S5839iVOPMG1_S5839iBULK1_HOME.tar.md5
is this possible as i've tried without luck or does splitfus not support s5839i
does it only split s5830i and not the above
cbbella said:
hi,
i'm trying to split the latest UK galaxy ace firmware: S5839iBUMG1_S5839iVOPMG1_S5839iBULK1_HOME.tar.md5
is this possible as i've tried without luck or does splitfus not support s5839i
does it only split s5830i and not the above
Click to expand...
Click to collapse
iv added the supported models to the op the s5839i is not included - the best person to contact is doky as he created this programme to see if there is a way to easily add your phone model
i dont know if you can simply copy the s5830i file in the base folder and rename the copy to s5839i - iv no idea if it will work and it may cause damage to your device if the phones are different in terms of mount points and partitions
I downloaded odin 3.07 and it flashed using the single file so no need to split when using odin 3.07. Happy days.
Sent from my GT-I9300 using Tapatalk
cbbella said:
I downloaded odin 3.07 and it flashed using the single file so no need to split when using odin 3.07. Happy days.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
later phones support single file firmware files - this was made for the galaxy y which didnt
not able to install cygwin on win7.
as per above procedure i was trying to install cygwin on my win7 pc but the installation was unsuccessfull. after downloading cygwin setup.exe and running & trying to connect through direct internet option then selecting mirror link, the download not started. i have tried several link given in setup installation windows also my internet connection are working properly. so is there any way to install this program without internet connection i mean to say just downloading on another pc & installing it in another. and also i want to ask u that is after installing cygwin setup i think there is window to select package so which are the package i should have to select. my main concern to ask this is, as you have suggested me in another thread make odin flashable rom package for my samsung galaxy y pro duos GT B5512 downlaoded from sammobile.com
please help us!
lastword said:
as per above procedure i was trying to install cygwin on my win7 pc but the installation was unsuccessfull. after downloading cygwin setup.exe and running & trying to connect through direct internet option then selecting mirror link, the download not started. i have tried several link given in setup installation windows also my internet connection are working properly. so is there any way to install this program without internet connection i mean to say just downloading on another pc & installing it in another. and also i want to ask u that is after installing cygwin setup i think there is window to select package so which are the package i should have to select. my main concern to ask this is, as you have suggested me in another thread make odin flashable rom package for my samsung galaxy y pro duos GT B5512 downlaoded from sammobile.com
please help us!
Click to expand...
Click to collapse
follow my instructions on the op for installing cygwin
you do not need internet to install cygwin
download the package from the link given in the op
run the setup
select install from a package folder on harddrive
select the package folder you have downloaded from the link given in the op (the same as the setup.exe)
DO NOT DOWNLOAD THE PACKAGE FROM THE CYGWIN SETUP! INSTALL FROM HARDDRIVE!
also B5512 is not in the support list but B5510 is - I dont know if you can use B5510 firmware on B5512
how to make my firmware supported by splitfus? do i need to a img file in the base folder?
badagila said:
how to make my firmware supported by splitfus? do i need to a img file in the base folder?
Click to expand...
Click to collapse
I wasnt the one who created it - it was doky but the img files in the base folder are the support models
what phone do you have - if its not on the support list the chances are your phone supports single file flashing and you can just put the single file firmware pack in pda and flash it
marcussmith2626 said:
I wasnt the one who created it - it was doky but the img files in the base folder are the support models
what phone do you have - if its not on the support list the chances are your phone supports single file flashing and you can just put the single file firmware pack in pda and flash it
Click to expand...
Click to collapse
samsung galaxy gio s5660
badagila said:
samsung galaxy gio s5660
Click to expand...
Click to collapse
your phone is not supported by splitfus2
your phone may support single file firmware flashing - download firmware from sammobile.com unzip and place in pda section
Else please refer to your own phones forum if it has one as I only support 5360
i have successfully installed cygwin as per above instruction on my pc to make odin flashable firmware downloaaded from sammobile.com for my sgy pro duos gt b5512. but after running as per above procedure up to splitfus command line i am ok but when i am tryinng to enter following command in cygwin
./splitfus2.exe-B5512XWLG1_B5512ODDLG_INS
i get following message in cygwin
bash./ ./splitfus2.exe-B5512XWLG1_B5512ODDLG_INS no such file and directory
then myself i checked the command and make correction bu still i get following error
***error decoding filename
i am following all instruction given above but i think some thing little mistake that i dont know that i was doing so please guide me details.
lastword said:
i have successfully installed cygwin as per above instruction on my pc to make odin flashable firmware downloaaded from sammobile.com for my sgy pro duos gt b5512. but after running as per above procedure up to splitfus command line i am ok but when i am tryinng to enter following command in cygwin
./splitfus2.exe-B5512XWLG1_B5512ODDLG_INS
i get following message in cygwin
bash./ ./splitfus2.exe-B5512XWLG1_B5512ODDLG_INS no such file and directory
then myself i checked the command and make correction bu still i get following error
***error decoding filename
i am following all instruction given above but i think some thing little mistake that i dont know that i was doing so please guide me details.
Click to expand...
Click to collapse
Please read the 1st post B5512 is NOT on the support list
also if you type ls at the promp it will tell you where you are in the directory and what files are in that directory
also ./splitfus2.exe-B5512XWLG1_B5512ODDLG_INS is wrong it should be
./splitfus2.exe -w B5512XWLG1_B5512ODDLG_INS
as I said though B5512 is not on the support list so chance of it working unlikely
have you tried single file flashing? ie just putting the firmware you downloaded from sammobile into the pda section and flashing it?
I cant offer any other support as your device is not supported and this is the 5360 forum
marcussmith2626 said:
Please read the 1st post B5512 is NOT on the support list
also if you type ls at the promp it will tell you where you are in the directory and what files are in that directory
also ./splitfus2.exe-B5512XWLG1_B5512ODDLG_INS is wrong it should be
./splitfus2.exe -w B5512XWLG1_B5512ODDLG_INS
as I said though B5512 is not on the support list so chance of it working unlikely
have you tried single file flashing? ie just putting the firmware you downloaded from sammobile into the pda section and flashing it?
I cant offer any other support as your device is not supported and this is the 5360 forum
Click to expand...
Click to collapse
i have tryied it to put single filr earlier but in that case in odin there is not able to select file option in pda other than .tar .md5 etc so how i can try to flash single file through odin sorry for asking in wrong thread buut there is no active thread for gt b5512 and for my bad english.and last i think there is no hope for my sgy pro duos gt b5512.
lastword said:
i have tryied it to put single filr earlier but in that case in odin there is not able to select file option in pda other than .tar .md5 etc so how i can try to flash single file through odin sorry for my bad english.
Click to expand...
Click to collapse
once you have downloaded the firmware from sammobile use winrar (or another unzipper) to unzip the firmware
you should have a file like the following
ModelofphoneXXXX1_ModelofphoneXXXXX1_ModelofphoneXXXXX_HOME.tar.md5
click pda and navigate to where that file is and you can select it
finally i have flashed my sgy gt b5512 through odin but still it stuck into samsung logo. but after complteing all finally i received message that pass in odin and then my phone boots but now in samsung logo still so is there any idea. another thing is that now my phone can enter into recovery mode which before was not. and in that i have tried to wipe cache and partion but still not working. please reply us.
Related
Hello.
WP7DZExtract extracts every partition from DZ file and converts flash.bin to nb (opens by htcRIE).
My second tool WP7DZBuild builds DZ from partitions and their table (mb it will be not required, please pm me LG device owners).
By the way, files from that topic were extract using this tool.
Usage:
WP7DZExtract.exe input.dz output_dir, there input.dz is DZ ROM file, output_dir is directory.
In output directory will be created many files, one of them, flash.bin, is nb file, just rename it to flash.nb and open it using htcRIE or any tool.
WP7DZBuild.exe input_dir output.dz, there input_dir is directory constains flash.bin, output.dz is out file.
Note: This tools requires .Net Framework 4.0 (at least Client Profile). You can download it form Microsoft web site.
I hope it works (althrough my device is LG, but there is no way to dump or flash it's ROM). Any bugreports here.
Thanks!
I've used standart GZIPStream (works well for unpacking), but it's output doesn't equals original, i've tried to use SharpZip, DotNetZip and even gzip, but uselessly... LG Flasher doesn't work on my computer (why?), so i can't check my work, i fully hope on you, LG owners! Sorry for my english, i dislike online translators and write as i know, though my english skill is pour (too).
Very nice. Hope to get using this very soon.
Yes support for lg devices i am loving it :3 Thanks.
I will tested out.
thx for sharing
Build tool is ready!
Great work!
I'm getting a "#46 Cannot load. Invalid file format" when opening flash.nb with HTCRIE
Please post the link to your ROM, mb i broked down something while developed build tool.
Telus_LG_E900
airwa1kin7 said:
Telus_LG_E900
Click to expand...
Click to collapse
Everything works well. Mb you are using old version of htcRIE? Try to donwload most fresh. At least WP7DZExtract checks hash after unpacking and compares it with dz included, so if hash matchs file is successfully unpacked.
Screenshot
Your correct. I was using "0.5.0.12" Upgraded to "0.7.0.19" and it works.
I was able to get the LG Quantum dz and use these tools to have a look inside the rom and the registry. It makes me wish we could rebuild these roms to unbrand them.
fb401 said:
I was able to get the LG Quantum dz and use these tools to have a look inside the rom and the registry. It makes me wish we could rebuild these roms to unbrand them.
Click to expand...
Click to collapse
That's right, i wanted to build my own rom, but as i wrote above there is no rom for my device. Please test it LG owners, i want to check my gz.
WP7DZBuild
I have been working on my own encrypt/decrypt program. The decrypting is fine, however the trick is encrypting the extracted files back into a flashable image. Using GZip or Zip on linux produces a ROM that is 200 KB smaller than the original LG C900AT ROM. The LG flasher program gives the error "ErrNum 501 Load Image."
So I tried using your WP7DZBuild tool to create a ROM and it's size is 214 MB, the original ROM is ~191.8 MB. The LG flasher program does not give an error when using the ROM built with your tool, but the ROM will not flash to the phone (LG Quantum C900). The LG flasher program just sits waiting. It seems as if the recompression of the files is the key to making the build process work. The original ROM from LG contains files that are decompressable with GZip, but using GZip to recompress results in an invalid file.
I have looked at the binary file produced when using both GZip and Zip, both contain the filename which is not included in the Original ROM . Also, looking at the GZIP file format, some of the Data headers are empty in the original ROM, but both GZip and ZIP fill these fields in.
Do you guys have any ideas as to a ZIP program/library that can output a valid Zip file for inclusion in a flashable ROM that does not include the name of the file that was compressed to make the file? Maybe the original LG encryption program deletes/zeros certain fields in the Zip file header?
Also, just taking the decrypted original ROM's files while still compressed by whatever method LG used, I can create a flashable ROM (it's actually what my phone is running right now!). I'm thinking of GZipping the files and then going back and zeroing out the fields so that the data headers match the original. Maybe that will work.
Has anybody else tried to rebuild a ROM and flash it to the phone?
Everyone test on kdz g5 ?
Hi All
I am so glad to present to all of you my custom ROM
So Let's strat
V1.0.0
Based on XPKJ1
Changelog:-
1.Added Polaris office
2.Remove 10 receptionists limit in SMS messaging
3.Added voice call recording
4.Ripped off some useless files like Java games,Ringtones & Wallpapers
Didn't Add Social Hub Premium because phone lags when it is activated in this FW
Important After Flashing:-
1.Connect the phone to Stune 1.0.6
2.Copy "office.dat" file from Extras folder to \Osp\Applications\06cm35xl2f\Data
3.Copy "All in 1.ttf" file from Extras folder to \AppEx\User\Font\Download (optional) (if you use apps with special language characters like Arabic,Urdu..etc)
4.Copy "Paperman.smt" file from Extras folder to \AppEx\User\Theme\Download (optional) (if you want Paperman theme)
5.Disconnect the phone from PC
6.Open Settings>>>Display>>>Font type &/or Theme to set your font &/or Theme
7.Open phone Keypad and enter the code *#33284*# choose Low and press Save and wait for phone reset
Download Links:-
S8500 V1.0.0
S8530 V1.0.0
Pass : sammobile.com
P.S : All in 1.ttf font is the font of 2.0.2 SDK so it supports almost all the languages
I am open for any questions so please don't hesitate to ask
Also please report any bug you find...I really appreciate feedback on my work
THIS FW HAS NO RELATION TO Samfirmware AND IT IS ONLY SUPPORTED BY ME
FLASH IT AT YOUR OWN RISK
Best Regards
@MyLove : social hub is necessary feature for me so i have changed clientstring.lang fi;e and csc using trix. and flash these files (csc and shpapp)as update but when i reboot the phome it says SHP has expired. and then i am unable to use shp. do you know what i did wrong?
mylove90 said:
Hi All
I am so glad to present to all of you my custom ROM
So Let's strat
V1.0.0
Based on XPKJ1
Changelog:-
1.Added Polaris office
2.Remove 10 receptionists limit in SMS messaging
3.Added voice call recording
4.Ripped off some useless files like Java games,Ringtones & Wallpapers
Didn't Add Social Hub Premium because phone lags when it is activated in this FW
Important After Flashing:-
1.Connect the phone to Stune 1.0.6
2.Copy "office.dat" file from Extras folder to \Osp\Applications\06cm35xl2f\Data
3.Copy "All in 1.ttf" file from Extras folder to \AppEx\User\Font\Download (optional) (if you use apps with special language characters like Arabic,Urdu..etc)
4.Copy "Paperman.smt" file from Extras folder to \AppEx\User\Theme\Download (optional) (if you want Paperman theme)
5.Disconnect the phone from PC
6.Open Settings>>>Display>>>Font type &/or Theme to set your font &/or Theme
7.Open phone Keypad and enter the code *#33284*# choose Low and press Save and wait for phone reset
Download Links:-
S8500 V1.0.0
S8530 V1.0.0
Pass : sammobile.com
P.S : All in 1.ttf font is the font of 2.0.2 SDK so it supports almost all the languages
I am open for any questions so please don't hesitate to ask
Also please report any bug you find...I really appreciate feedback on my work
THIS FW HAS NO RELATION TO Samfirmware AND IT IS ONLY SUPPORTED BY ME
FLASH IT AT YOUR OWN RISK
Best Regards
Click to expand...
Click to collapse
For Important file after flash you can put in all in one PFS
flash it together or reset Hard if after flashing
badelemental said:
@MyLove : social hub is necessary feature for me so i have changed clientstring.lang fi;e and csc using trix. and flash these files (csc and shpapp)as update but when i reboot the phome it says SHP has expired. and then i am unable to use shp. do you know what i did wrong?
Click to expand...
Click to collapse
use stune to replace client file and customer.xml file too
then pre-config your phone with *#272*HHHH# code and choose the csc file you edited
you should get SHP by doing this
but as i said before your phone will lag
best regards
sent from S8500 using dolfin 3.0
can you fix samsung apps account issue?
can you fix samsung apps account issue?
Click to expand...
Click to collapse
In theory could try or compare Apps from working Version...
Maybe KH3 or MBUKI...
Check Osp\Applications...
Best Regards
it would be awesome if some1 made a quick tutorial to edit firmwares just like mylove90 did.
sorry for offtopic.
...some1 made a quick tutorial...
Click to expand...
Click to collapse
Maybe you could do this.
2 Tools exists for this Task:
http://forum.xda-developers.com/showthread.php?t=1028714
Wave_Remaker is maybe easier to handle...
And TriX.
Read... learn... write your Tutorial.
Best Regards
I already downloaded and checked those tools but still some questions.
Is there any need to sign or something the firmware after changing it?
Again, sorry for off topic mylove90, thanks for your work on firmware.
Is there any need to sign or something the firmware after changing it?
Click to expand...
Click to collapse
Normally both TriX AND Wave_Remaker create compatible files for Multiloader.
Both Tools have features for advanced users...
For you no need to enter Utils1 and 2 on Wave_Remaker.
Concentrate your energie only on First Tab... FW view
Best Regards
mylove90 said:
use stune to replace client file and customer.xml file too
then pre-config your phone with *#272*HHHH# code and choose the csc file you edited
you should get SHP by doing this
but as i said before your phone will lag
best regards
sent from S8500 using dolfin 3.0
Click to expand...
Click to collapse
Thanx for the answer. i found what i was doing wrong. Since i did not did full flash thats why shp was not working. Now after full flash i am able to run SHP snd polaris office. One more thing i want to ask from where everyone get thispolaris office fiile?? it is not available in stores. To integrate it i dumped it from previous beta .
Polaris is from S8600 Firmware...
Best Regards
one more thing i found this firmware. this firmware is comptable with bada1.2 application. i just tested some apps and there was not any problems with option menu anymore.
can i get polaris without having to reflash
kadavil said:
can i get polaris without having to reflash
Click to expand...
Click to collapse
i don't think that it is possible
best regards
Seeking a firmware XPKJ1 hub polaris + p. on. those who pass me the link?
hello,just he;p my friend upgrade her wave 2 to bada 2.0 ~S8530ZCLB4_S8530OZCLB4_CHN~but now only have one problem is can't login to market~cause it only recognize~chn network provider~she using the malaysia provider~is that any tools or solution~i have found some one from others chinese forum they change the same fw~to allow login taiwan market
If You know Firmware editing Did it
Dump .FFS file With Wave_Remaker and Follow This
SystemFS<User<OspSys<registry<Service.ini
Open Service.ini You See chn.ospserver.net Change it To www.ospserver.net
after save .ffs file and Full Flash Your Phone
hero355 said:
If You know Firmware editing Did it
Dump .FFS file With Wave_Remaker and Follow This
SystemFS<User<OspSys<registry<Service.ini
Open Service.ini You See chn.ospserver.net Change it To www.ospserver.net
after save .ffs file and Full Flash Your Phone
Click to expand...
Click to collapse
TQ for reply,but after i dump~edit~but after save~the files is in 0kb~how? just try the other wave remaker~0.2.2version can success save but~when try to verify the service.ini~still~chn.ospserver.net problem solved,THANKS
Hi all, Is it possible to de-odex a stock rom & then remove all apk's bloatware of your own choice....Thx in advance ...:good:
Yeah,it will work...use dsixda kitchen
Grab the stock Rom from the ruu
Extract it from the kitchen and the Rom will become your *****
donhashem.dh said:
Yeah,it will work...use dsixda kitchen
Grab the stock Rom from the ruu
Extract it from the kitchen and the Rom will become your *****
Click to expand...
Click to collapse
Hey thx *****,
Just couple q's tho.
I HV the stock ROM. What does u mean grab from ruu?
Extract it from the kitchen and it will b de-odexed. Is there a tutorial?
Cheers dude.
No mate
1.Run the right ruu for your Rom
Then write in the search bar %temp%
It'll give you a folder called Temp go into it
2.search that Temp folder for the word rom
3.it will get you a Rom.zip file,grab that file but don't unzip it..
When you install the kitchen there us a folder called place Rom here...so put that Rom you extracted in that folder then use the kitchen
donhashem.dh said:
No mate
1.Run the right ruu for your Rom -
Then write in the search bar %temp% -
It'll give you a folder called Temp go into it
2.search that Temp folder for the word rom
3.it will get you a Rom.zip file,grab that file but don't unzip it..
When you install the kitchen there us a folder called place Rom here...so put that Rom you extracted in that folder then use the kitchen
Click to expand...
Click to collapse
Way above my head mate.
Install the kitchen? Is this software onto pc.
Im hboot 1.36 is this relevant?
What search bar?
Update: found the kitchen and big thx *****, just what ive needed. Dont like those custom roms...
That search bar on windows when you click that windows logo on the down left of the screen...btw to use the kitchen you have to also install cygwin,I've made a tutorial,search on google how to make your own Rom and write my username it'll give you the thread u made
donhashem.dh said:
That search bar on windows when you click that windows logo on the down left of the screen...btw to use the kitchen you have to also install cygwin,I've made a tutorial,search on google how to make your own Rom and write my username it'll give you the thread u made
Click to expand...
Click to collapse
Cool and exellent guide. But I cannot download the kitchen. Cant find the download button....Donate works fine......Found it. daaaaa
donhashem.dh said:
That search bar on windows when you click that windows logo on the down left of the screen...btw to use the kitchen you have to also install cygwin,I've made a tutorial,search on google how to make your own Rom and write my username it'll give you the thread u made
Click to expand...
Click to collapse
9) Read the Android Kitchen FAQ to copy the Android Kitchen to your Cygwin root directory and to finally run it
Not sure on this one have google it but many links and not sure which is relevant.......found it, think same page Kitchen xda
If I had WiFi I would of did it for you,but I'm on 3g
veroby said:
9) Read the Android Kitchen FAQ to copy the Android Kitchen to your Cygwin root directory and to finally run it
Not sure on this one have google it but many links and not sure which is relevant.......found it, think same page Kitchen xda
Click to expand...
Click to collapse
ROM_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27_Radio_5.1204.162.29_release_298897_signed
I have extract this rom to the destination folder specified and endeavoru shows up within tools\edify_ . Is this correct.
a.cd kitchen>press enter - bash: syntax error near unexpected token `newline`
Think some thing is gone wrong with my kitchen
update: needed to rename folder to "kitchen" is working now...
Dude without an a. Just
cd kitchen
./menu
btw don't put the ruu.exe in the destination folder you extract the rom from it,I gave you the way
no signature....problem ?!?!?!
rkDumpSlicer
RockChip firmware dump slicer to obtain flashable backup
Version 0.97 Windows
1. Slices dump of NAND into partitions (according "parameter" information)
2. Creates config,cfg for RKAndroidTool (1.xx, 2.xx)
Brief instruction
1) Download and unpack AndroidTool v.2.1 + rkDumpSlicer
2) Run AndroidTool 2.1
3) Get the "parameter" file (put a 0 in the "start" box and a 2 in the "count" at "advance functions" tab and press the "export image" button).
4) Open file ExportImage.img in any text editor (except MS Word).
5) Find line "CMDLINE:....bla-bla-bla"
6) Find last data in "mtdparts=rk29xxnand:" parameter (something like "[email protected](user)")
Value "0x005AE000" is count of blocks
7) Put a 0 in the "start" box and value from previous point in the "count".
8) Press the "export image" button.
9) Run "rkDumpSlicer.exe ExportImage.img"
The project is closed
Use rkDumperOld versions:
View attachment rkDumpSlicer_095.zip
View attachment rkDumpSlicer_096.zip
I don't know anybody needs this tool
Tell me please
RedScorpioXDA said:
I don't know anybody needs this tool
Tell me please
Click to expand...
Click to collapse
Hi Redscorpio
Have you seen this tool, I think it's similar to yours.
http://www.freaktab.com/showthread.php?12404-RockchipDumpSplit-Simplifies-the-creation-of-backups-from-rockchip-devices
dewettie said:
Have you seen this tool, I think it's similar to yours.
http://www.freaktab.com/showthread.php?12404-RockchipDumpSplit-Simplifies-the-creation-of-backups-from-rockchip-devices
Click to expand...
Click to collapse
I don't think so. Maybe even better , but I did this tool for myself. If anyone is not interesting I will not publish
RedScorpioXDA said:
rkDumpSlicer
RockChip firmware dump slicer to obtain flashable backup
Version 0.95 Windows
...
Click to expand...
Click to collapse
Just to know before I use your tool (or the other one in freaktab)
Some device makers post their firmware in one file, normally titled "update.img", in this are included all is needed.
Are flashed back using RKBatchTool ... your app will generate such file?
TIA
DaremoS said:
Some device makers post their firmware in one file, normally titled "update.img", in this are included all is needed.
Are flashed back using RKBatchTool ... your app will generate such file?TIA
Click to expand...
Click to collapse
Some files in "update.img" (RKAF) don't contained in devises partitions. For example: bootloader (like RK3188Loader(L)_V1.24.bin for RK3188), recover-script, update-script. You can add files and make own flashable fw (imgRePackerRK with option /rkaf)
rkDumpSlicer
RockChip firmware dump slicer to obtain flashable backup
New version 0.96 ready
+ RKAndroidTool's configuration files creating have added
- config_8.cfg for version 1.xx;
- config_16.cfg for version 2.xx;
thanks.
is this tools able to bacup rk2926
mithun roy said:
is this tools able to bacup rk2926
Click to expand...
Click to collapse
I haven't possibility to check
rkDumpSlicer
RockChip firmware dump slicer to obtain flashable backup
New version 0.97 ready
~minor bugs fixed
The project is closed
Use rkDumper
Excellent and reliable tool, thanks a lot!
Works much better for me than the other image splitting program which, for some reason, keeps aborting, telling me that I have 0.00MB or free disk space although I have hundreds of gigs free.
RkDumper is nice too, but I prefer doing a full NAND dump using RK Android Tool and use this one to split it.
Yet another one of your very, very useful tools, RedScorpio.
спасибо !