My N7105 started with (Tre) HTS 4.1.2:
PDA: N7105XXDMB2
CSC: N7105HTSDMA1
MODEM: N7105XXDLL5
I switch provider and got the new update 4.3 from them:
Product Code: TLA
PDA: N7105XXUEMK9
CSC: N7105TLAEMK1
MODEM: N7105XXUEMJ9
After this i cant make any more calls. Or to say i can make 1 call after reboot and then it loses mobil network.
IMIE is correct and APN are correct.
I tried to see if there are any new firmwares for HTS Sweden but they havnt release 4.3
The wired thing is I still can surf the internet via 4G but cant make any calls or send sms.
Also my phone goes into roaming mode and things im somewhere else.
I have tried to change firmware to:
PDA: N7105XXUEMK9
CSC: N7105DNFEMK2
MODEM: N7105XXUEMJ9
and also:
GT-N7105 Galaxy Note II LTE
PDA: N7105XXUEMK5
CSC: N7105NEEEMK1
MODEM: N7105XXUEMJ9
But still same problems. I gone throw most of the forums here and found lots of information for N7100 but i need help with the N7105.
Please can anyone help me or refer me to right patches or firmware i can use to be able to make calls again.
I have now also tried flashing several modems:
XXALJ3 (Sweden / Telia) N7105XXDLK7
XXDLL4 (Sweden / Tre) N7105XXDLL4_modem_HTS
XXDLL7 (Sweden / Tre) N7105XXDLL5_modem_HTS
XXDMC3 (DNF) N7105XXDMC3_modem_DNF
Installed also DN3 V3.2 Rom.
Still same problem. Lose my mobil registration and can use the internet. (Not throw Wifi, but APN setting)
Getting frustrating not nowing what to do or try.
Bump
Finaly got kies to backup the firmware to:
Product Code: HTS
PDA: N7105XXUEML2
CSC: N7105HTSEML1
MODEM: N7105XXUEMJ9
BUT still same problem.
The phone seams to be connected with the operator as i spoke with the operator and they can se it. But i cant make calls or send sms.
Its like the phone is stuck on 4G.
I have tried to change to GSM only and more but still no luck.
Anyone out there that has the same problem as me?
i had nearly the same thing on my N7100
let some one call you , it heard the ring tone but your N7105 didn't ring , then you should use Z3 to rewrite your IEME number
freerose said:
i had nearly the same thing on my N7100
let some one call you , it heard the ring tone but your N7105 didn't ring , then you should use Z3 to rewrite your IEME number
Click to expand...
Click to collapse
There is no ringtone. Plus IEME nr is correct and sending right info to new peovider. Its a software problem thats for sure.
As the roaming is turning on all the time im starting to wounder if its the Region lock thats playing around. As all 4.3 have now recieved regional lockes and to unlock it you need to put the origanal sim provider to unlock it and after that you can use any provider. Have ordered a prepaid card from the original provider and will try to start it up to se if its regional locked.
Related
PDA: KJ3 / PHONE: KJ3 / CSC: KJ3 (XXX)
Can anyone tell me what the XXX means and why its there? My phone SHOULD be displayed TLS but it is displaying XXX. I had a Vietnamese dude Unlock my phone, is this related to that? Is my warranty void because of this? Is there any way to change it back? (Odin flashing to TLS stock firmware did not change this value)
I have a galaxy S2X but it sounds like these sorts of serial numbers are used on all samsung devices
alphahelix said:
PDA: KJ3 / PHONE: KJ3 / CSC: KJ3 (XXX)
Can anyone tell me what the XXX means and why its there? My phone SHOULD be displayed TLS but it is displaying XXX. I had a Vietnamese dude Unlock my phone, is this related to that? Is my warranty void because of this? Is there any way to change it back? (Odin flashing to TLS stock firmware did not change this value)
I have a galaxy S2X but it sounds like these sorts of serial numbers are used on all samsung devices
Click to expand...
Click to collapse
Yikes? Can I get a hand? Is this related to the preceding CSC (country specific code)?
I'm assuming this default XXX samsung code is preventing me from updating via Kies?
Recently I bought a Galaxy Note 2 , and I installed the following firmware :
Model: GT-N7100
Country: Greece (Cosmote)
Version: Android 4.1.2
Changelist: N/A
Build date: N/A
Product Code: COS
PDA: N7100XXDMB2
CSC: N7100COSDMA2
MODEM: N7100XXDLK7.
After Installing that firmware the phones IME number did change and there is no network signal at all ,gives an error message cannot register to network.
Does anyone have some ideas of how to change the IME number , as well as get signal back on the phone.
Any help really appreciated.
:good:
george120879 said:
Recently I bought a Galaxy Note 2 , and I installed the following firmware :
Model: GT-N7100
Country: Greece (Cosmote)
Version: Android 4.1.2
Changelist: N/A
Build date: N/A
Product Code: COS
PDA: N7100XXDMB2
CSC: N7100COSDMA2
MODEM: N7100XXDLK7.
After Installing that firmware the phones IME number did change and there is no network signal at all ,gives an error message cannot register to network.
Does anyone have some ideas of how to change the IME number , as well as get signal back on the phone.
Any help really appreciated.
:good:
Click to expand...
Click to collapse
I've read this thread http://forum.xda-developers.com/showthread.php?t=2389426 looks like in order for you to fix that, is you need to have a back up of your efs. And I'm guessing you don't have one.
Try searching through google or here for a way to restore it without the back up. And you can try sending private msg. to experts like dr.ketan. Make sure to thank him if he helps you
Sent from my GT-N7100
ROM: ARHD 19
KERNEL: Stock
laziafbaito said:
I've read this thread http://forum.xda-developers.com/showthread.php?t=2389426 looks like in order for you to fix that, is you need to have a back up of your efs. And I'm guessing you don't have one.
Try searching through google or here for a way to restore it without the back up. And you can try sending private msg. to experts like dr.ketan. Make sure to thank him if he helps you
Sent from my GT-N7100
ROM: ARHD 19
KERNEL: Stock
Click to expand...
Click to collapse
Then the Question now gets Different
How to restore my IMEI on Galaxy note 2 if I don't have a backup of /efs?
george120879 said:
Then the Question now gets Different
How to restore my IMEI on Galaxy note 2 if I don't have a backup of /efs?
Click to expand...
Click to collapse
Yes, but next time instead of posting a new topic, just edit your OP.
Sent from my GT-N7100
ROM: ARHD 19
KERNEL: Stock
AP: I9500XXUGNH2
CP: I9500XXUGNF6
CSC: I95000JVFNG1
1.) I cant find the firmware for this version. could you send me a direct link to it (I am android 4.4.2). The firmware is official
2.)also why is it I cant find a version. I am in Australia and but I bought it overseas, if I download a firmware for Australia will that mess with my imei and baseband number and stop me from calling
3.) Is there another baseband like my own which I can use instead of this with out stopping me from calling
Wrong forum. This is for the M919 variants. The firmware you need is here http://www.sammobile.com/firmwares/ just search for i9500. NH2 firmware is there but you should ask in the i9500 forums to make sure which is the correct one you need
Hello, This is my first ever post on this website. Please bear with me if it's too long or confusing.
I have a Galaxy Note II I317. It's basically an AT&T phone but when I insert SIM from another carrier (e.g. H2O) it doesn't ask me for an unlock code. Moreover, I have an unlock code from AT&T as well.
The phone shows full signal strength for the mobile carrier. However, I'm unable to send sms or make a phone call. Whenever I try to place a call, it says "emergency calls only". I tried this in USA and now I'm in Pakistan.
Here, I encountered the same problem. We have five major networks here in Pakistan. Ufone, Zong, Telenor, Mobilink and Warid. I tried with Ufone, Warid and Telenor. The phone works OK with Telenor but experienced the above problem with Warid and Ufone. I have rooted the phone, downgraded to 4.1.1. and then back to 4.4.2. However, nothing seems to work. Mobile repair shops are also of no help. If anyone has any idea, I will really appreciate this.
Model Number: SAMSUNG-SGH-I317
Android Version: 4.4.2
Baseband Version: I317UCUCNE5
Kernel Version: 3.0.31-1728680 [email protected] #1
Build Number: KOT49H.I317UCUCNE5
Serial Number: R21CA5HRQPP
Device Status: CUSTOM
Hi,
You can try this thread, and ask about it here if you wish,
http://forum.xda-developers.com/showthread.php?t=2037017
Good luck!
I have tried this method but I don't get the option "now you are in [6] Network Lock then choose [4] NW Lock NV Data INITIALLIZ".
I looked around on internet for this problem and found that this methods works with 4.1.1 and below. Moreover, this is for mobiles which ask for an unlock code. My Galaxy Note II doesn't ask for an unlock code.
I will have your thread moved then to your device section, so the experts who own your device can help.
?
Hi,
I am trying to find the correct version of firmware so I can flash it to my unbranded unlocked S20+ (SM-G986U1).
I flashed using Odin the following version:
PDA: G986U1UES1ATG3
CSC: G986U1OYZ1ATG3
downloaded from Sammobile with a date of 8-3-2020 and all it did was ad a purple theme. Still the phone does not show the wifi calling buttons. I had already registered my EMEI with ATT . Am I missing something?
Any help will be greatly appreciated.