Hi all
I purchased an i9195 lte from Kogan. It is an international phone and I want to flash it with an Australian version. There are no Branded or unbranded ROMs for the phone. is it possible to use the I9195T ROM on the international phone? I tried using ODIN to flash the phone with Telstra and XSA ROMS and it fails with a security failure message. I assume that ithe flashing process has some way of matching the ROM to the model number. From what I understand the Telstra and international version have the same specifications, with only difference being a larger battery.
If I can't use the i9195t rom, is there any way to change the CSC to Australia without having an Australian region ROM?
Any help much appreciated
dkw04058 said:
Hi all
I purchased an i9195 lte from Kogan. It is an international phone and I want to flash it with an Australian version. There are no Branded or unbranded ROMs for the phone. is it possible to use the I9195T ROM on the international phone? I tried using ODIN to flash the phone with Telstra and XSA ROMS and it fails with a security failure message. I assume that ithe flashing process has some way of matching the ROM to the model number. From what I understand the Telstra and international version have the same specifications, with only difference being a larger battery.
If I can't use the i9195t rom, is there any way to change the CSC to Australia without having an Australian region ROM?
Any help much appreciated
Click to expand...
Click to collapse
Hi
If You want help must give more data. What Rom have You installed, what Rom You want flash. If You type on phone keyboard *#1234# what data AP, CS, CSC You have.
ValenteL said:
Hi
If You want help must give more data. What Rom have You installed, what Rom You want flash. If You type on phone keyboard *#1234# what data AP, CS, CSC You have.
Click to expand...
Click to collapse
*#1234# for the current rom shows
AP I9195XXUAMH1
CP I9195XXUAMH1
CSC I9195OXXAMH3
The rom I want to install is (I9195TDVUAMH1_I9195TXSAAMH1_XSA)
AP I9195TDVUAMH1
CP I9195TDVUAMH1
CSC I9195TXSAAMH1
The main reason for the change is so that I can get NAVIGON which SAMSUNG provide free for Australian ROMs.
regards
Darren
Any solution?
Hey lad, So what did you do? I'm in a similar situation. Bought it from kogan also. Received the I9505T.. I want to flash an irish verion of the I9505 on this phone but not sure if it's allowed. How did it work out for you?
Regards, Eoghan.
Version Changelist
Currently: I9195TDVUAMH1 Android 4.2.2 01.08.2013 1266356
Want to put on: I9195XXUAMF5 Android 4.2.2 13.06.2013 870901
dkw04058 said:
*#1234# for the current rom shows
AP I9195XXUAMH1
CP I9195XXUAMH1
CSC I9195OXXAMH3
The rom I want to install is (I9195TDVUAMH1_I9195TXSAAMH1_XSA)
AP I9195TDVUAMH1
CP I9195TDVUAMH1
CSC I9195TXSAAMH1
The main reason for the change is so that I can get NAVIGON which SAMSUNG provide free for Australian ROMs.
regards
Darren
Click to expand...
Click to collapse
Hi all.
I just got a Note 2, N7100, and have a couple of things I'm wondering about.
First some information:
Bootloader Version:
N7100XXUEMK9
PDA Version:
N7100xxuemk9
Csc Version:
N7100XXEMK4.
I saw in the offical thread for 4.4.2, that some one was talking about mk4 and so, which is it?
The bootloader is unlocked, right?
Some thing I need to no about the basebands?
Can I chose a firmware on sammobile and download it from say turkey?
With Best regards Bobin
No need to unlock bootloader or anything like that. Just go to sam mobile and download any ROM for your model (N7100) it doesn't matter which country they all work and have all languages, even though it is best to use as close as possible or exact country because of the MODEM.... Just flash it through ODIN.
If you are downloading from SamMobile, make sure the roms are XXU
XXUE are location ROMs, and they will drain your battery.
Hi All,
Got a small question about upgrading my S4Mini (GT-I9195 LTE) from 4.2.2 to 4.4.2.
At the moment my phone is on stock-rom which is 4.2.2 , when i check for 'updates' it says, 'latest updates already installed'.
Also when connecting to 'Kies' , the program says latest firmware already installed..
However when i check the Sammobile website for the GT-I9195 Model there are newer firmware's showing up , Android 4.4.2, but it depends on the country if the firmware is already at 4.4.2.
For the Netherlands, where i'm from, this one is available :
Model: GT-I9195
Model name: GALAXY S4 mini LTE
Country: Netherlands (Vodafone)
Version: Android 4.4.2
Changelist: 1646188
Build date: Tue, 27 May 2014 08:17:05 +0000
Product Code: VDF
PDA: I9195XXUCNEA
CSC: I9195VFGCNE4
MODEM: I9195XXUCNEA
However, i'm not with Vodafone as a provider, would that be a problem ?
When i check my phone specs, this is what i get:
AP: I9195XXUBNB3
CP: I9195XXUBNB3
CSC: I9195PHNBND1
Can i just install android 4.4.2 from Sammobile without any problem ?
Thanks in advance.
Mascarponi said:
Hi All,
Got a small question about upgrading my S4Mini (GT-I9195 LTE) from 4.2.2 to 4.4.2.
At the moment my phone is on stock-rom which is 4.2.2 , when i check for 'updates' it says, 'latest updates already installed'.
Also when connecting to 'Kies' , the program says latest firmware already installed..
However when i check the Sammobile website for the GT-I9195 Model there are newer firmware's showing up , Android 4.4.2, but it depends on the country if the firmware is already at 4.4.2.
For the Netherlands, where i'm from, this one is available :
Model: GT-I9195
Model name: GALAXY S4 mini LTE
Country: Netherlands (Vodafone)
Version: Android 4.4.2
Changelist: 1646188
Build date: Tue, 27 May 2014 08:17:05 +0000
Product Code: VDF
PDA: I9195XXUCNEA
CSC: I9195VFGCNE4
MODEM: I9195XXUCNEA
However, i'm not with Vodafone as a provider, would that be a problem ?
When i check my phone specs, this is what i get:
AP: I9195XXUBNB3
CP: I9195XXUBNB3
CSC: I9195PHNBND1
Can i just install android 4.4.2 from Sammobile without any problem ?
Thanks in advance.
Click to expand...
Click to collapse
Network/carrier specific firmware may have custom software or setting for the ROM, it better to find some other model that are as close to your phone's spec as possible to avoid any potential problem.
As if your phone has Know, it would trigger Know if you don't update via the official way.
TNCS said:
Network/carrier specific firmware may have custom software or setting for the ROM, it better to find some other model that are as close to your phone's spec as possible to avoid any potential problem.
As if your phone has Know, it would trigger Know if you don't update via the official way.
Click to expand...
Click to collapse
Hi, thanks for your answer.
Knox-flag is already triggered on my phone, but because i had to sent it back to shop for maintenance they reset it back to factory settings (android 4.2.2.)
However, i don't get it the way Samsung is updating the phone's. It's said that 4.4.2 is out for S4Mini , however when i'm searching for my device on Sammobile (I9195XXUBNB3), it still says 4.2.2.
Should I wait with updating, or what else ?
Mascarponi said:
Hi, thanks for your answer.
Knox-flag is already triggered on my phone, but because i had to sent it back to shop for maintenance they reset it back to factory settings (android 4.2.2.)
However, i don't get it the way Samsung is updating the phone's. It's said that 4.4.2 is out for S4Mini , however when i'm searching for my device on Sammobile (I9195XXUBNB3), it still says 4.2.2.
Should I wait with updating, or what else ?
Click to expand...
Click to collapse
That depends entirely on you... If you wish to preserve the warranty and keep the KNOX, than don't. If you can't wait and don't get bother by KNOX or warranty than go for it.
LOL, too tired, I just realize I keep typing KNOX as 'know'...
TNCS said:
That depends entirely on you... If you wish to preserve the warranty and keep the KNOX, than don't. If you can't wait and don't get bother by KNOX or warranty than go for it.
LOL, too tired, I just realize I keep typing KNOX as 'know'...
Click to expand...
Click to collapse
I just typed that my KNOX warranty is already void, it's triggerd 0x1.
I'm now just wondering what the best way is for me to update to stock 4.4.2...i'm confused with al the stock-roms that have 4.4.2 for S4Mini on Sammobile.
Mascarponi said:
I just typed that my KNOX warranty is already void, it's triggerd 0x1.
I'm now just wondering what the best way is for me to update to stock 4.4.2...i'm confused with al the stock-roms that have 4.4.2 for S4Mini on Sammobile.
Click to expand...
Click to collapse
All the ROM listed on Smmmobile is for different region. And I would also expect there won't be a 4.4.2 for your specific phone since you've check via Kies. So you need to find a phone from another region that are same spec as yours - band, function, etc and prefer not a carrier/network model.
Alternatively you can go for the custom KK ROM here.
TNCS said:
All the ROM listed on Smmmobile is for different region. And I would also expect there won't be a 4.4.2 for your specific phone since you've check via Kies. So you need to find a phone from another region that are same spec as yours - band, function, etc and prefer not a carrier/network model.
Alternatively you can go for the custom KK ROM here.
Click to expand...
Click to collapse
O.k..that is right
Hi im trying to root my note 10 plus exynos model and am having some issues finding the proper firmware to patch. All samsung firmware for the note 10 is organized by region so I need some help figuring out what region my phone is made for so I can download the appropriate file. when I type *#1234# I get these
AP: N975FXXU1ASH5
CP: N975FXXU1ASH5
CSC: N975FOXM1ASH5
Model: SM-N(75F/DS
thanks in advance!
-randall
randallrbaker said:
Hi im trying to root my note 10 plus exynos model and am having some issues finding the proper firmware to patch. All samsung firmware for the note 10 is organized by region so I need some help figuring out what region my phone is made for so I can download the appropriate file. when I type *#1234# I get these
AP: N975FXXU1ASH5
CP: N975FXXU1ASH5
CSC: N975FOXM1ASH5
Model: SM-N(75F/DS
thanks in advance!
-randall
Click to expand...
Click to collapse
download N975F firmware that is OXM region.. u can probably find the exact firmware u listed even lol.. thatd be the safest rout for you..
Hi,
I am trying to find the correct version of firmware so I can flash it to my unbranded unlocked S20+ (SM-G986U1).
I flashed using Odin the following version:
PDA: G986U1UES1ATG3
CSC: G986U1OYZ1ATG3
downloaded from Sammobile with a date of 8-3-2020 and all it did was ad a purple theme. Still the phone does not show the wifi calling buttons. I had already registered my EMEI with ATT . Am I missing something?
Any help will be greatly appreciated.