[Q] Help with Galaxy Note 2 N7100 - Galaxy Note II Q&A, Help & Troubleshooting

Recently I bought a Galaxy Note 2 , and I installed the following firmware :
Model: GT-N7100
Country: Greece (Cosmote)
Version: Android 4.1.2
Changelist: N/A
Build date: N/A
Product Code: COS
PDA: N7100XXDMB2
CSC: N7100COSDMA2
MODEM: N7100XXDLK7.
After Installing that firmware the phones IME number did change and there is no network signal at all ,gives an error message cannot register to network.
Does anyone have some ideas of how to change the IME number , as well as get signal back on the phone.
Any help really appreciated.
:good:

george120879 said:
Recently I bought a Galaxy Note 2 , and I installed the following firmware :
Model: GT-N7100
Country: Greece (Cosmote)
Version: Android 4.1.2
Changelist: N/A
Build date: N/A
Product Code: COS
PDA: N7100XXDMB2
CSC: N7100COSDMA2
MODEM: N7100XXDLK7.
After Installing that firmware the phones IME number did change and there is no network signal at all ,gives an error message cannot register to network.
Does anyone have some ideas of how to change the IME number , as well as get signal back on the phone.
Any help really appreciated.
:good:
Click to expand...
Click to collapse
I've read this thread http://forum.xda-developers.com/showthread.php?t=2389426 looks like in order for you to fix that, is you need to have a back up of your efs. And I'm guessing you don't have one.
Try searching through google or here for a way to restore it without the back up. And you can try sending private msg. to experts like dr.ketan. Make sure to thank him if he helps you
Sent from my GT-N7100
ROM: ARHD 19
KERNEL: Stock

laziafbaito said:
I've read this thread http://forum.xda-developers.com/showthread.php?t=2389426 looks like in order for you to fix that, is you need to have a back up of your efs. And I'm guessing you don't have one.
Try searching through google or here for a way to restore it without the back up. And you can try sending private msg. to experts like dr.ketan. Make sure to thank him if he helps you
Sent from my GT-N7100
ROM: ARHD 19
KERNEL: Stock
Click to expand...
Click to collapse
Then the Question now gets Different
How to restore my IMEI on Galaxy note 2 if I don't have a backup of /efs?

george120879 said:
Then the Question now gets Different
How to restore my IMEI on Galaxy note 2 if I don't have a backup of /efs?
Click to expand...
Click to collapse
Yes, but next time instead of posting a new topic, just edit your OP.
Sent from my GT-N7100
ROM: ARHD 19
KERNEL: Stock

Related

Problems updating to 4.0 and changing CSC

I need help updating to android 4.0. I have been going trough pages and reading, but there is simply too much stuff that i cant understand. Here is the situation: I can't update to android 4.0 through kies. What i need to do?
Model number: GT.i9100
Android version: 2.3.4
Baseband version: I9100XXKG1
Kernel version: 2.6.35.7-i9100XXKG1-CL349526 [email protected] #2
Build number: Gingerbread.XXKG1
I have rooted my phone earlier, installed custom ROM, and then installed android 2.3.4 stock firmware. Information above tells everything about my SGS2. I can't find android 4.0 firmware download links, or instructions how to even do it. I have odin, and before i rooted my phone i took this information up what my phone used to be
baseband 19100xxki4
kernel i9100xwki8
To be hones, i don't know what those even mean. I only know that now they are different, and because my CSC is wrong i cant update with kies. I installed application called CSC select and it says my CSC is KOR. I also read that it needed to be NEE(nordic countries), to be able to update with kies. How ever CSC select application doesn't have a NEE available...
I am pretty clueless what i needed to do now, would really apperciate if someone could give me some advice. I dont need my android 4.0 to be rooted.
In the same boat
Riikka said:
Model number: GT.i9100
Android version: 2.3.4
Baseband version: I9100XXKG1
Kernel version: 2.6.35.7-i9100XXKG1-CL349526 [email protected] #2
Build number: Gingerbread.XXKG1
Click to expand...
Click to collapse
Hi, I am much in the same position as you. I am still trying to figure out my options, and will post back if I get anywhere. In the meantime, can you please post CSC etc details of your phone? You can get this by opening the dialer, and dialling
Code:
*#1234#
This is what I get; can you confirm if you have the same thing?
Code:
PDA : I9100XXKG1
PHONE : I9100XXKG1
CSC : I9100[B]O[/B]XAKG1
Build Info: Tue Jul 5 23:11:24 KST 2011
(Note that the bold letter in CSC is an uppercase letter "o", NOT numeral "0").
Do you have any idea if your phone is region-locked, region-free, unlocked, factory unlocked etc? Bought in India?
Cheers,
prshah said:
Hi, I am much in the same position as you. I am still trying to figure out my options, and will post back if I get anywhere. In the meantime, can you please post CSC etc details of your phone? You can get this by opening the dialer, and dialling
Code:
*#1234#
This is what I get; can you confirm if you have the same thing?
Code:
PDA : I9100XXKG1
PHONE : I9100XXKG1
CSC : I9100[B]O[/B]XAKG1
Build Info: Tue Jul 5 23:11:24 KST 2011
(Note that the bold letter in CSC is an uppercase letter "o", NOT numeral "0").
Do you have any idea if your phone is region-locked, region-free, unlocked, factory unlocked etc? Bought in India?
Cheers,
Click to expand...
Click to collapse
I have to same problem
I order my phone on ebay from china made in Korea

[Q] n7100 N7100XXUEMK9 no IMEI odin FAIL KNOX activated

Hi everyone,
I am tried to recuperate a Samsung note 2 GT-N7100 without efs backup and baseband, imei and network lost. KNOX is activated.
Following to "Originally Posted by dr.ketan View Post N7100XXUEMJ5 How to Root + Remove New Bootloader + KNOX Free" from "dr.ketan" I really hope that I can do it. But in the first steep I´m blocked, because when I try to flash "PDA: N7100XXUEMJ5" in the first second appears "FAIL" and the phone said "that is not compatible with this version".
To download the original rom from sammovile like dr-ketan said linking to "http://forum.xda-developers.com/showthread.php?t=2499794" of "Faryaab" and I cant find:
Model: GT-N7100
Country: Open Europe
Version: Android 4.3
Changelist: 2138564
Build date: Wed, 20 Nov 2013 19:16:05 +0000
Product Code: OXX
PDA: N7100XXUEMK9
CSC: N7100OXXEMK4
MODEM: N7100XXUEMJ9
Download: Mod Edit on links.
or
Model: GT-N7100
Country: Open Asia
Version: Android 4.3
Changelist: 1903221
Build date: Wed, 16 Oct 2013 23:49:26 +0000
Product Code: OLB
PDA: N7100XXUEMJ5
CSC: N7100OLBEMJ4
MODEM: N7100XXUEMJ5
Download:Mod Edit on links.
So I download from external webs but am not sure if it doesn’t work or is my phone´s problem.
I explain exactly all my probes that i did before this post, an actually I am really feel that I´m loose this battle, so please if anybody has an idea it´ll be great!
I beging with no IMEI, so the phone can´t take network to use it. Always that become dead the only way to recuperate it is flash via odin:
Model: GT-N7100
Model name: Galaxy Note II
Country: Spain
Version: Android 4.3
Changelist: 2138564
Build date: Wed, 20 Nov 2013 10:22:31 +0000
Product Code: PHE
PDA: N7100XXUEMK9
After that I can swicth on, but steel without IMEI and network; and of course KNOX activated.
Ok, let´s go to explain what I did before in case this can give aut some information:
1.- To recuperate the IMEI with ARIZA-Path
http://forum.xda-developers.com/galaxy-s3/help/solved-siii-network-problem-update-sn-t1918601
I obtain root access to install busy-box and ariza-patch with KNOX activated. The patch was apply correctly, but it wasn’t recuperate the IMEI
2.- To recuperate the modem or base band using different files
Here I used many post from XDA testing different modems, patch and baseband according of my PDA file in every moment. But still no work, sometimes become in CWM mode "signature fail", other via odin "PASS"; but the conclusion in every case is the same, "phone unknown, no baseband, no IMEI..."
Here I have other question, when u flash the modem, for example "XXDME4 / DXDMF1 / DDMG1" do you have to put only the correct one (DXDMF1 in my case) or all of it. I did both, just to try.
http://forum.xda-developers.com/showthread.php?t=1584250 to read and http://forum.xda-developers.com/showthread.php?t=2044937 to download modems
http://forum.xda-developers.com/showthread.php?t=2468119
3.- To recuperate the IMEI via flash Philz after that in CWM using this post http://forum.xda-developers.com/showthread.php?t=2536418
The same situation
4.- To complete flash and recovery with http://forum.xda-developers.com/showthread.php?t=2154890
I did the same operation in other S-4 and works, but here my problem is:
- The complete pack of 5 files to flash it via odin, I only found for android 4.1.2
- If I try to downgrade with KNOX active, become "FAIL"
- If I try to flash a version of android 4.3 without KNOX, appears one more time the same "FAIL"
Posible solution for that ¿¡?
- Find out a complete flash files for android 4.3 (PDA, MODEM or baseband, BOOTLOADER, CSS and in case Pit file)
- Downgrade to 4.1.2 and install OXA pack that I have it
- Restore it for SAT http://forum.xda-developers.com/showthread.php?t=2618261 with flash counter in 0
- Use KIES to restore it (I hate this possible solution) external link obviously in http://www.droidviews.com/firmware-upgrade-encountered-an-issue-solution/
Hopefully u posts it in correct place and someone can help me.
Regards to moderates people and every person who post looking for helps to others.
To Downgrade you N7100 and remove KNOX you need
1. OLD JTAG microSD card
2. Open the phone
3. Short Resistor
4. Power up the phone
5. Wait for success message
6. Assembly back
7. Flash to ANY old SW and Knox will not showed in Download Mode
Many phones checked like that

[Q] Install 4.4.2 from Sammobile manually

Hi All,
Got a small question about upgrading my S4Mini (GT-I9195 LTE) from 4.2.2 to 4.4.2.
At the moment my phone is on stock-rom which is 4.2.2 , when i check for 'updates' it says, 'latest updates already installed'.
Also when connecting to 'Kies' , the program says latest firmware already installed..
However when i check the Sammobile website for the GT-I9195 Model there are newer firmware's showing up , Android 4.4.2, but it depends on the country if the firmware is already at 4.4.2.
For the Netherlands, where i'm from, this one is available :
Model: GT-I9195
Model name: GALAXY S4 mini LTE
Country: Netherlands (Vodafone)
Version: Android 4.4.2
Changelist: 1646188
Build date: Tue, 27 May 2014 08:17:05 +0000
Product Code: VDF
PDA: I9195XXUCNEA
CSC: I9195VFGCNE4
MODEM: I9195XXUCNEA
However, i'm not with Vodafone as a provider, would that be a problem ?
When i check my phone specs, this is what i get:
AP: I9195XXUBNB3
CP: I9195XXUBNB3
CSC: I9195PHNBND1
Can i just install android 4.4.2 from Sammobile without any problem ?
Thanks in advance.
Mascarponi said:
Hi All,
Got a small question about upgrading my S4Mini (GT-I9195 LTE) from 4.2.2 to 4.4.2.
At the moment my phone is on stock-rom which is 4.2.2 , when i check for 'updates' it says, 'latest updates already installed'.
Also when connecting to 'Kies' , the program says latest firmware already installed..
However when i check the Sammobile website for the GT-I9195 Model there are newer firmware's showing up , Android 4.4.2, but it depends on the country if the firmware is already at 4.4.2.
For the Netherlands, where i'm from, this one is available :
Model: GT-I9195
Model name: GALAXY S4 mini LTE
Country: Netherlands (Vodafone)
Version: Android 4.4.2
Changelist: 1646188
Build date: Tue, 27 May 2014 08:17:05 +0000
Product Code: VDF
PDA: I9195XXUCNEA
CSC: I9195VFGCNE4
MODEM: I9195XXUCNEA
However, i'm not with Vodafone as a provider, would that be a problem ?
When i check my phone specs, this is what i get:
AP: I9195XXUBNB3
CP: I9195XXUBNB3
CSC: I9195PHNBND1
Can i just install android 4.4.2 from Sammobile without any problem ?
Thanks in advance.
Click to expand...
Click to collapse
Network/carrier specific firmware may have custom software or setting for the ROM, it better to find some other model that are as close to your phone's spec as possible to avoid any potential problem.
As if your phone has Know, it would trigger Know if you don't update via the official way.
TNCS said:
Network/carrier specific firmware may have custom software or setting for the ROM, it better to find some other model that are as close to your phone's spec as possible to avoid any potential problem.
As if your phone has Know, it would trigger Know if you don't update via the official way.
Click to expand...
Click to collapse
Hi, thanks for your answer.
Knox-flag is already triggered on my phone, but because i had to sent it back to shop for maintenance they reset it back to factory settings (android 4.2.2.)
However, i don't get it the way Samsung is updating the phone's. It's said that 4.4.2 is out for S4Mini , however when i'm searching for my device on Sammobile (I9195XXUBNB3), it still says 4.2.2.
Should I wait with updating, or what else ?
Mascarponi said:
Hi, thanks for your answer.
Knox-flag is already triggered on my phone, but because i had to sent it back to shop for maintenance they reset it back to factory settings (android 4.2.2.)
However, i don't get it the way Samsung is updating the phone's. It's said that 4.4.2 is out for S4Mini , however when i'm searching for my device on Sammobile (I9195XXUBNB3), it still says 4.2.2.
Should I wait with updating, or what else ?
Click to expand...
Click to collapse
That depends entirely on you... If you wish to preserve the warranty and keep the KNOX, than don't. If you can't wait and don't get bother by KNOX or warranty than go for it.
LOL, too tired, I just realize I keep typing KNOX as 'know'...
TNCS said:
That depends entirely on you... If you wish to preserve the warranty and keep the KNOX, than don't. If you can't wait and don't get bother by KNOX or warranty than go for it.
LOL, too tired, I just realize I keep typing KNOX as 'know'...
Click to expand...
Click to collapse
I just typed that my KNOX warranty is already void, it's triggerd 0x1.
I'm now just wondering what the best way is for me to update to stock 4.4.2...i'm confused with al the stock-roms that have 4.4.2 for S4Mini on Sammobile.
Mascarponi said:
I just typed that my KNOX warranty is already void, it's triggerd 0x1.
I'm now just wondering what the best way is for me to update to stock 4.4.2...i'm confused with al the stock-roms that have 4.4.2 for S4Mini on Sammobile.
Click to expand...
Click to collapse
All the ROM listed on Smmmobile is for different region. And I would also expect there won't be a 4.4.2 for your specific phone since you've check via Kies. So you need to find a phone from another region that are same spec as yours - band, function, etc and prefer not a carrier/network model.
Alternatively you can go for the custom KK ROM here.
TNCS said:
All the ROM listed on Smmmobile is for different region. And I would also expect there won't be a 4.4.2 for your specific phone since you've check via Kies. So you need to find a phone from another region that are same spec as yours - band, function, etc and prefer not a carrier/network model.
Alternatively you can go for the custom KK ROM here.
Click to expand...
Click to collapse
O.k..that is right

back flashing from 4.4.2 GT-N7105 LTE

hey everybody,
i hope somebody can help and advise me on my dilema,
i have recently bought a note 2 GT-N7105 LTE from a friend who upgraded to a note 3 and the problem i have is a simple one,the device is locked to EE/Tmobile in the UK and i would like to unlock the bootloader so i can use any sim
from what i have read so far here on the forum i need to flash the existing rom which is 4.4.2 back to 4.1.1 before running the bootloader unlock method i found here on XDA
the information i need is that i was warned that back flashing from 4.4.2 may hard brick the device and would like some confirmation is this is true or not
the device is not rooted and has no custom recovery is pure stock so some advise and maybe even links to solve mt problem would be very much appreciated...thank you
p.s. i found this firmware on sammobile and would also like to ask if this will work for the unlocking process
Model: GT-N7105
Model name: GALAXY Note II LTE
Country: United Kingdom (EE)
Version: Android 4.1.1
Changelist: N/A
Build date: Thu, 01 Jan 1970 00:00:00 +0000
Product Code: EVR
PDA: N7105XXALIJ
CSC: N7105EVRALIC
MODEM: N7105BVALIG
mrsynister1971 said:
hey everybody,
i hope somebody can help and advise me on my dilema,
i have recently bought a note 2 GT-N7105 LTE from a friend who upgraded to a note 3 and the problem i have is a simple one,the device is locked to EE/Tmobile in the UK and i would like to unlock the bootloader so i can use any sim
from what i have read so far here on the forum i need to flash the existing rom which is 4.4.2 back to 4.1.1 before running the bootloader unlock method i found here on XDA
the information i need is that i was warned that back flashing from 4.4.2 may hard brick the device and would like some confirmation is this is true or not
the device is not rooted and has no custom recovery is pure stock so some advise and maybe even links to solve mt problem would be very much appreciated...thank you
p.s. i found this firmware on sammobile and would also like to ask if this will work for the unlocking process
Model: GT-N7105
Model name: GALAXY Note II LTE
Country: United Kingdom (EE)
Version: Android 4.1.1
Changelist: N/A
Build date: Thu, 01 Jan 1970 00:00:00 +0000
Product Code: EVR
PDA: N7105XXALIJ
CSC: N7105EVRALIC
MODEM: N7105BVALIG
Click to expand...
Click to collapse
You might have trouble getting an Odin flash to succeed due to the 4.4.2 rom and it's bootloader. Try to flash the device's 4.1.1 modem to allow the menu options needed to unlock the device. Once the unlock is completed you can flash the correct modem back to the device.
what you can do is flash the 4.1.1 modem which should give you the options you need to unlock.

Galaxy Note 4 upgrade problem

Hello Xda , i need your help
i bought a new Galaxy Note 4 and every time i check for new updates i get a messege " registration failed" . i understand that it's something about csc and region.
currently i live in Egypt and this is the phone details:
SM-N910G
build number: LRX22C.N910GDTU1BOE1
baseband version: N910GDTU1BOC7
*#1234# results:
AP: N910GDTU1BOE1
CP:N910GDTU1BOC7
CSC:N910FOJK1BOC2
i need your help to fix this problem and enable me to update.
thank you.
any help please:crying:

Categories

Resources