[Q] Password rejected after full device encryption - Galaxy Note II Q&A, Help & Troubleshooting

Hello there.
I've just encrypted my N7105 with 4.1.2 stock ROM.
Well, big surprise... password is not accepted and I can no more boot Android.
Hard reset, any kind of wipe and firmware flash don't solve, it's still prompting for password.
At this point, I think the problem is in the bootloader, how can I restore the original bootloader?
Thanks and best regards

Related

Galaxy Neuxs Encryption woes!!!

Hey All,
New to XDA but been using this site years so my level of Android knowledge is not bad.
I am currently having a huge problem with my Nexus. I used Google Apps encryption on it recently and that seems to have bricked my phone. I am unable to reset to factory settings to wipe the encryption as recommended by Google and I am stuck now with a bricked Nexus.
I also tried flashing stock roms with Odin which appears to work but the encryption still remains. All I am trying to do is put the stock back on my phone and re-root but I am having no joy. When using CWM to flash a new rom the system does not mount in recovery mode so I can't load any other roms. I have also tried the fastboot method but it stalls on waiting for device all the time.
If anyone has seen this and can help or if anyone just knows how to fix it please help me! I am stuck now with a useless Nexus. I should have just left it alone but as usual I couldn't.
Any help would be so appreciated. Thank you.
By some chance is your phone both rooted with CWM?
Hey, yeah it was so when I did a factory reset it could'nt use the stock bootloader so it didn't know how to wipe it. Unfortunetly once you apply encryption from a Google Apps the only way to remove is to factory reset.
I got around it by fastbooting the stock bootloader, radio and image from Google. Then I completed a manual reset using the original bootloader.
A world of hurt really! I have learned a lot but never going near Google Apps encryption again. It also slowed down the phone too.
Anyhow all sorted now, re rooted and running revolution rom now.
theres another thread with a guy who had the same problem. I wonder if vzw nexus has an issue with encrypting...
If the phone wasn't rooted I would have had no issues. It is simply a problem when it comes to loading roms. In CWM the recovery cant mount the data/system so you can't flash anything. Also doing a factory reset from settings doesnt work because the phone is looking for a stock bootloader which it doesn't have once you root. So I ended up in a loop and could do nothing. Fortunetly I learned all about adb and fastboot this morning, never heard of them before and that allowed me to reload stock and unroot. I still had to wipe the phone using the bootloader as I couldn't get into the phone or past the encryption.
If anyone is having issues with this I will gladly help as I really thought that my phone was bricked and was very frustrated. The only way I got help was from a guy on this tread http://forum.xda-developers.com/showthread.php?t=1392037&page=3

[Q] CM10 m2 Encryption Issue

Ok. I foolishly enabled encryption on my i711 and after putting in the password, the volumes unlock and the system starts. The problem is that if the screen goes off for any reason, the phone reboots. Tried all sorts of things to correct and decided I no longer wanted the phone encrypted. There is no way back. Ok, so I thought I could do a factory reset... No dice. The phone reboots and all is still encrypted and there.
Next I tried clockworkmod but couldn't do ANYTHING there because the encrypted volumes aren't mountable. I couldn't factory reset, install a new rom, etc.
Next I went to ODIN and tried to repartition. No luck there either. I flashed clockworkmod again for good measure and even tried Nand Erase All.
After this I booted into the phone and tried to repartition... Now I have a phone that displays the lovely CM10 boot screen but never gets passed that. I can still get into recovery.
Any thoughts on how to undo the encryption and reflash a rom?
fza99 said:
Ok. I foolishly enabled encryption on my i711 and after putting in the password, the volumes unlock and the system starts. The problem is that if the screen goes off for any reason, the phone reboots. Tried all sorts of things to correct and decided I no longer wanted the phone encrypted. There is no way back. Ok, so I thought I could do a factory reset... No dice. The phone reboots and all is still encrypted and there.
Next I tried clockworkmod but couldn't do ANYTHING there because the encrypted volumes aren't mountable. I couldn't factory reset, install a new rom, etc.
Next I went to ODIN and tried to repartition. No luck there either. I flashed clockworkmod again for good measure and even tried Nand Erase All.
After this I booted into the phone and tried to repartition... Now I have a phone that displays the lovely CM10 boot screen but never gets passed that. I can still get into recovery.
Any thoughts on how to undo the encryption and reflash a rom?
Click to expand...
Click to collapse
I have some very bad news for you.... Encryption is a one way street. Once encrypted the only way back is to flash stock via fastboot.
I can't even start to explain how to use fastboot as I have never been in a situation where I have needed it.
recoveries lose all access on encrypted devices so this is the only way.
Here is some links to get you started... Please do research before you begin the process and make sure you've obtained the appropriate files. I will take no responsibility for bricking your device.
Flashing via Fastboot:
http://forum.xda-developers.com/wik...id#Android_Flashing_Guide_.28with_fastboot.29
Installing Fastboot on Windows:
http://www.redmondpie.com/how-to-set-up-android-adb-and-fastboot-on-windows-tutorial/
Sent from my SGH-I747 using xda app-developers app

[Q] Wiping phone

I need help wiping data off my phone. Back then when I tried to wipe phone to sell all I had to do is Encrypt the phone then select Factory Reset to take care of everything. LG G3 seems to ask me to decrypt it first before I can factory reset. I'm on stock rom. No root or bootloader unlock.
Bump, I have the same question. I want to factory reset to turn my phone in. I encrypted it and went to factory reset and it says it wants to decrypt first.
Is there no way to decrypt it first?
Sent from my LG-D851 using Tapatalk
There is, but doesn't that defeat the purpose of encrypting in the first place?

TWRP password problem with my OP5T

Hi everyone,
I have recently flashed my new O5T with OmniROM 8.1, tried a few hours and i decided to restore my backup. But i could not enter TWRP with my pin code. So i enter in as encrypted and wiped it. But when i reset the system the rom didn't start properly, there was only black screen. So i can not set my pin as a password, because i can not enter my settings.
Could anyone please help me on this?
Sorry for my English.
You should try restoring back to stock. U need to be familiar with ADB, which I assume u are. https://forum.xda-developers.com/oneplus-5t/how-to/how-to-revert-to-oos-oreo-8-1-t3730952

Stuck on Startup

Having some serious trouble. I rebooted my phone and it asked for my password once it was done as always but this time it said it was wrong. I'm certain I used the correct password but even tried my other alternatives to be sure and still a no go. This isn't the decryption option password you get when booting but my lockscreen password. I booted into recovery and it asks me for an encryption password that I never set but I know this is a common issue with twrp. Tried to go back into android but wouldn't let me because of the "wrong" password so I used the failsafe and went into recoveries file manager and deleted my lockscreen settings to remove my lockscreen passcode (tried and proven method, done it dozen times before). Got past my lockscreen this time but now it was saying starting android forever. Figured it was something with the passcode being deleted so I just decidd to factory reset from the recovery and take that loss. NOW the problem is upon booting the rom in trying to start the setup, I'm stuck on the "just a sec..." screen that comes up after you click start. What do I do from here? I cant access anything in recovery because the encryption passcode issue so I'm kind of stuck. Also I'm a work right now and we cant connect our phones (or any USB for that matter) to the computers and laptops because theyre government property and on a secured line. Any help PLEASE, Ill be home later and can try more then.
Well since you already did a factory reset on the device you mine as well just do a clean install of the OFW then get twrp back and flash your ROM etc back. Would probably be better then to deal with everything going on with the device right now.
loeffler23 said:
Well since you already did a factory reset on the device you mine as well just do a clean install of the OFW then get twrp back and flash your ROM etc back. Would probably be better then to deal with everything going on with the device right now.
Click to expand...
Click to collapse
Hey, I got my phone back working after that and rooted again and flashed same rom. NOW another problem, I rebooted my phone and its not accepting my PIN anymore, nor my fingerprint, and I cant reset through TWRP because of encryption. WTF is the issue, how do I fix this or do I have to flash-all again?

Categories

Resources