Hey All,
New to XDA but been using this site years so my level of Android knowledge is not bad.
I am currently having a huge problem with my Nexus. I used Google Apps encryption on it recently and that seems to have bricked my phone. I am unable to reset to factory settings to wipe the encryption as recommended by Google and I am stuck now with a bricked Nexus.
I also tried flashing stock roms with Odin which appears to work but the encryption still remains. All I am trying to do is put the stock back on my phone and re-root but I am having no joy. When using CWM to flash a new rom the system does not mount in recovery mode so I can't load any other roms. I have also tried the fastboot method but it stalls on waiting for device all the time.
If anyone has seen this and can help or if anyone just knows how to fix it please help me! I am stuck now with a useless Nexus. I should have just left it alone but as usual I couldn't.
Any help would be so appreciated. Thank you.
By some chance is your phone both rooted with CWM?
Hey, yeah it was so when I did a factory reset it could'nt use the stock bootloader so it didn't know how to wipe it. Unfortunetly once you apply encryption from a Google Apps the only way to remove is to factory reset.
I got around it by fastbooting the stock bootloader, radio and image from Google. Then I completed a manual reset using the original bootloader.
A world of hurt really! I have learned a lot but never going near Google Apps encryption again. It also slowed down the phone too.
Anyhow all sorted now, re rooted and running revolution rom now.
theres another thread with a guy who had the same problem. I wonder if vzw nexus has an issue with encrypting...
If the phone wasn't rooted I would have had no issues. It is simply a problem when it comes to loading roms. In CWM the recovery cant mount the data/system so you can't flash anything. Also doing a factory reset from settings doesnt work because the phone is looking for a stock bootloader which it doesn't have once you root. So I ended up in a loop and could do nothing. Fortunetly I learned all about adb and fastboot this morning, never heard of them before and that allowed me to reload stock and unroot. I still had to wipe the phone using the bootloader as I couldn't get into the phone or past the encryption.
If anyone is having issues with this I will gladly help as I really thought that my phone was bricked and was very frustrated. The only way I got help was from a guy on this tread http://forum.xda-developers.com/showthread.php?t=1392037&page=3
Related
So I am the proud owner of a shiny, new Galaxy Nexus (GSM). Unlocked the bootloader and installed CWM recovery and was doing great. Today I decided to install the volume fix. Installed the zip through recovery, completed and rebooted. The phone got stuck in a bootloop over and over and over and over and would not boot Android at all. Did a ton of research here and everywhere and, in a panic, I booted into CWM recovery, reset the cache & did a full factory reset. NOW, the phone will not go past the Google bootscreen with the unlock symbol, no matter what I do. AND, I can't even flash the original google image because I can't get in to set USB debugging so my computer won't even recognize the phone (FYI, I'm on a Mac). I am at a complete loss and don't know what to do. If I could only get the computer to recognize the phone I could flash the original google image through Terminal, but alas, I can't. Any ideas? If I can somehow get this phone back up and running I would be eternally grateful. For now, I think I may be SOL. Thanks....
This happened to me, I was not able to solve the issue, even though I could push and pull data to and from the device via ADB. I could still not get past the google logo. I decided to lock the boot loader again and return to the store for a new device.
http://groups.google.com/group/android-building/msg/2cd2b16ed56a7e84
Sent from my Galaxy Nexus using XDA App
hartford said:
So I am the proud owner of a shiny, new Galaxy Nexus (GSM). Unlocked the bootloader and installed CWM recovery and was doing great. Today I decided to install the volume fix. Installed the zip through recovery, completed and rebooted. The phone got stuck in a bootloop over and over and over and over and would not boot Android at all. Did a ton of research here and everywhere and, in a panic, I booted into CWM recovery, reset the cache & did a full factory reset. NOW, the phone will not go past the Google bootscreen with the unlock symbol, no matter what I do. AND, I can't even flash the original google image because I can't get in to set USB debugging so my computer won't even recognize the phone (FYI, I'm on a Mac). I am at a complete loss and don't know what to do. If I could only get the computer to recognize the phone I could flash the original google image through Terminal, but alas, I can't. Any ideas? If I can somehow get this phone back up and running I would be eternally grateful. For now, I think I may be SOL. Thanks....
Click to expand...
Click to collapse
One more post like this in Dev section and you'll be banned for 3 weeks
So my issue is pretty similar, see what you guys think. i been trying everything i can think of.
i updated from xtrestolite 2.1 to 2.2 with out wiping. everything worked fine except when i would make calls, the other people could not hear me. so i updated the bootloader and modem again (i had done it before) and the problem persisted. i flashed back to stock and was getting stuck at the s6 edge screen. the only way to get around this was and get my phone to boot was to flash aou kernel. i was still having a similar issue with calling so I download a modem from a diffrent server and all of a sudden, it was working again on stock firmware... AWESOME!
now that i had all that done and my phone working as it should, i reset my phone for the first time and i got the FRP lock, wont boot phone because custom kernel. GREAT
I then flashed stock of6 again, the tar ball, and the 4 piece version. no dice
i then found of8, tried to flash that still no dice.
id love to flash twrp and load a rom on, but FRP is a alsjdflajs.
the phone will flash successfully, but upon reboot, it will go into recovery, run its course, reboot, and get stuck that the galaxy s6 edge screen.
i use the vol and power click during recovery to see what its doing and everything seems to go fine. it will then say failed to mount /data. im hoping flashing this with the pit file will work, but i cannot download the pit file from my work computer (hahah its blocks on 4shard and mega).
anyone have any other advice? i will update if i figure it out.
Regards team,
-Mad
p.s. none of this is xtrestolite's fault, that rom has been nothing but good to me.. my phone has been picky though. after 5.1.1 i had to flash a custom kernel in order for the digitizer to function properly.... any help is appriciated guys.
SO UPDATE!
nothing good, i tried the pit with of6 and of8, no dice. still stuck.
anyone got a s6 edge w a broken screen? you can claim it lost for all i care.
no one?
i guess if anything past flash stock firmware people dont know? was hoping for alittle more insight.
im sure if i could flash a kernel i could get it to turn on, but FRP has be at bay...
no help for you bro...Samsung just needs to release there software fixing for this comunity...I'm looking a for a dev to answer my question in this section about just flashing zip files in twrp instead of using odin or whatever other methods that can avoid all these problems that are all similar...hopefully in next few months it will be addressed
Hey mate, try this...
http://forum.xda-developers.com/showthread.php?p=61531848
Sent from my SM-G925T using Tapatalk 2
holy... fu34%# /S45it.... IT BOOT?!
after flashing every firmware 100000 times...
THANK YOU!
I initially used odin to flash OI1 update, after a rom I was using caused problems and I got bootloop. It changed bootloader value to b:3 and I'm unable to downgrade now so I used smart switch which didn't recognize device so used emergency recovery and still bootloop. I have factory reset and wipe cache multiple times along with adb side load and individual flashes of bootloader, modem, kernel, flashed custom kernel and twrp to access fix permissions and to mount partitions with advanced wipe etc and still wont boot past logo. Also during one fix attempt phone said can't mount system.. Idk I'm not understanding where the problem is .everything says successful but I'm still in bootloop. Please help. I've spent hours everyday for the past week searching & trying different things that seem might help so open to any suggestions.
Ok guys I am pretty sure I fubar'd my tablet.
I am stuck in a recovery loop. When I start the tablet it just goes back into recovery. Which if I still had TWRP I think I could still do something, but I flashed cyanogen recovery trying to flash cm13 since I cold not get anything else to work. I cannot boot into download/firmware update screen. The screen just flickers a little and goes dark.
A little background:
Started when tablet forced install of 5.0 update and I was in a recovery loop. I flashed 410 test build, rooted, flashed twrp, installed stock rooted ROM. Everything was fine. Then tablet did it again, this time I just flashed rooted ROM and factory reset. Even took the steps to fix the white lines and storage issues. Was working fine. Got home a few days ago and I was in a recovery loop again. But now I don't have the bootloader screen/download mode/firmware update screen (whatever you want to call it) so last night i tried to download cm13, Gapps and cyanogen recovery with no avail.
I can access adb on my PC while in recovery, but when I try to access ADB shell I get unauthorized something or other. Because I cannot authorize USB debugging, because ROM won't boot. I tried to flash stock rooted ROM from cyanogen recovery and it says not signed or something like that.
Does anyone have any ideas? I really think I have screwed the pooch here.
sent from a device using an app
title
if you have a stock recovery image flashing it is easy, i had a LOT of troubles with my v410 and still am working with it. i have mine rooted, just with TWRP though, i cant use xposed framework, which negates why i rooted this in the first place. anyway, through much grit and determination flash your stock image after wiping what needs to be wiped and doing all other necessary things. Then, you must download kingo root, supersu, superuser. flashify would help with the flashing i hear, but it has troubles with the v410. kingo root was an apk i managed to find buried under a million viruses on the 34th page of google..or something. rooted mine in one click, from stock to reboot to twrp root.. many glitches.
I need help myself, deleted my "Phone" system app, causing me to lose connectivity with my data plan. cant seem to restore it, and flashify nor twrp has been able to flash a custom recovery, or a backup, im at a loss.
Help? We seek the same thing.
Ok but how do I flash the stock recovery image. I can't use fastboot. ADB says I am unauthorized.
sent from a device using an app
Anyone have any other ideas?
I am at a complete loss. I am by no means a developer, but I do know my way around. I really think I have FUBAR'd this one.
Kind of stinks, I give up. Anyone want a bricked v410?
Sent from my Galaxy Tab 2 using Tapatalk
Hey Guys,
my sisters phone stopped working...
Its a normal M9 with stock recovery thats not rooted, bootloader is still locked and no usb debugging turned on. no SD card.
Its somehow stuck on boot. I have tried wiping cache, but that did not help.
I did not go for a factory reset yet, since my sister really wants to keep her photos (its the first 4 months with her 1st child).
The phone is still under warranty but support says, they would just repair, not recover the data, obviously.
What would be the best way to recover the data?
I know i could try a factory reset and then work with data recovery tools, but is that really reliable?
I also read that a custom recovery like CWM or TWRP can give access to the stored data, but i am unsure if that would void the warranty.
So i am quite torn on what to do with this thing since im really scared of messing something up.
Any help would be really appreaciated
Edit: wrong forum, im so sorry
I have an Iriver NS-14T002. Not sure how but I still have stock rom on the device and worked on some rooting. Worked well didn't have any issues until one day seems it wont boot into OS. Gladly I had a backup just in case with cwm. I restored and everything seem to work fine. Then it happened again so I thought well I will just unroot it and make it factory again, but I wasnt going to mess with it at the moment. I worked on some other projects and realized that the cwm backup was gone. Little upset so I researched the internet for the stock rom. Couldn't find it. Maybe a custome rom? Nope this device has little support which I understand. I tried factory resetting with CWM. Didn't fix it. Delvik? Nope. So I had adb shell available for CWM. I thought if I reflash stock recovery that it would know how to properly factory reset the OS. Nope no go. Now I am stuck with factory recovery and a broken OS. Factory recovery doesn't have adb access or if it does I dont know how to gain it. The recover version is 4.2.01. Or Android system recover <3e>. Anyway I can possibly flash cwm back on it? or if there is any solution to repair android OS that would be great. On another not I am not sure if the tablet has a bootloader.