Develop Bugs

[App][Mod][Script] switch modem anytime anywhere (EDIT: 201011102047HKT csc added)

i made this little update.zip just for testing with different modems anytime i want to, so it may be useless to most of u guys but i think some ppl may need it in some cases
the attached is ONLY a skeleton, the modem file inside the zip is an empty file
usage:
- open the update-modem-xxx.zip file and drag the modem.bin u want to flash in the zip and replace the zero size modem.bin in it (no need to chg other files), close the zip and that's all
- make copies of zip file for different modems if u wish (sorry but no time to make fancy file selection at the moment)
- flash the modem by selecting ur desire modem in cwm under /sdcard (pls refer to cwm page for how-to)
- no need to worry about recovery2e or 3x coz as long as u can run cwm, u r with recovery2e (or others in the future)
so possibilily, u can have update-modem-jpp.zip, update-modem-jpa.zip, and so forth
and for me, i've the following files on my sdcard:
update-modem-I9000XWJPA.zip
update-modem-I9000XXJPP.zip
update-modem-I9000ZSJP8.zip
update-modem-I9000ZSJPE.zip
why?
- provides a way to let u switch modem if u suspects the modem causes problems
- see if u can find the best modem for u
how?
- the modem will be flashed with redbend_ua, a direct write to ur phone's /dev/block/bml12
Note: ur phone will flick 2 or 3 times during flash
WARNING: i tested it on my phone with JPx, froyo 2.2 on galaxy i9000 only. I cannot say it's 100% safe although i flashed my phone a lot of times, so use it at your own risks
Also note that there will be NO updates in the future
EDIT: the redbend_ua is taken from somwhere, all credits go to the modder

+1 for this. Can i use this to change my csc too?
Sent from my GT-I9000 using XDA App

ragin said:
+1 for this. Can i use this to change my csc too?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i've an update file to custom csc also

Can you post that? Please.
Sent from my GT-I9000 using XDA App

Very useful.
Thank you

Can somebody compile a zip file with JPE modem inside? I'm outside of my town for this week and I wanted to test JPE Modem, I just have my phone with me.
Please, thanks!

efegue said:
Can somebody compile a zip file with JPE modem inside? I'm outside of my town for this week and I wanted to test JPE Modem, I just have my phone with me.
Please, thanks!
Click to expand...
Click to collapse
here it is

ragin said:
Can you post that? Please.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
sure and attached
but i wonder why u need that coz the csc can be easily replaced
anyway, open the zip file, change all TGY (Hong Kong) to ur country/sales code, as well as rename the TGY directory to ur country/sales code. however, i've remove all localized apps from the csc (ie nothing except sales code, so u'll have to add urs if u want to)
Note that it does not "flash" anything to ur phone, instead it will create custom csc files on /system and /system/csc only

Thanks a lot ykk_five!!

OP, you could also just for "fun" include a .bat file, signapk.jar, testkeys and allow the user to drop in any modem and run the .bat to get a signed zip (ofcourse im targetting 2e users when i say this).

does anyone have specs on the modems signals ?
currently on jpo firmware and signal is very low
its not very good at home anytime with o2 but it would be nice to try them all to see if i get better reception .
has anyone compiled a full list of available modem files for froyo

ykk_five said:
sure and attached
but i wonder why u need that coz the csc can be easily replaced
anyway, open the zip file, change all TGY (Hong Kong) to ur country/sales code, as well as rename the TGY directory to ur country/sales code. however, i've remove all localized apps from the csc (ie nothing except sales code, so u'll have to add urs if u want to)
Note that it does not "flash" anything to ur phone, instead it will create custom csc files on /system and /system/csc only
Click to expand...
Click to collapse
Thanks for your effort, my problem is I keep flashing ROMS, & even the so called BIG APN list doesn't list all the providers of India. I use 2 of them & while with one I dont have a problem, with the other, I always need to feed APN settings everytime. I am an Architect, trigger happy & looking for readymade solutions so that I get more time for my profession.
Will you please do up a flashable update.zip for India? I can just flash it & all my settings are again correct.
Thanks again.
PS : If this can become like a repository of various modems & csc's, could be a HIT with people like me.

can someone give me the i9000ORO modem file ? i have jpa ver on my phone.
thx!

ragin said:
Thanks for your effort, my problem is I keep flashing ROMS, & even the so called BIG APN list doesn't list all the providers of India. I use 2 of them & while with one I dont have a problem, with the other, I always need to feed APN settings everytime. I am an Architect, trigger happy & looking for readymade solutions so that I get more time for my profession.
Will you please do up a flashable update.zip for India? I can just flash it & all my settings are again correct.
Thanks again.
PS : If this can become like a repository of various modems & csc's, could be a HIT with people like me.
Click to expand...
Click to collapse
i see...
i'm afraid not coz it requires some works to make a rom/kernel for a specific country

gt i9000m
can anyone provide modem for the galaxy s for bell . i use a rogers sim? but i have very poor signal .

If I am going to USA, which modem should I use (i.e. which modem is from a US version firmware)?

[ROM] Hybrid Stock XWJS3 pda + OLBJPA csc + DXJPB modem

Many people have been asking me how to get the combination of the stock Android 2.2.1 ROM, XWJS3 with the CSC and modem from the Asian DXJPE rom.
I decided to put up this procedure and downloads for those who want to try it.
I assume that you already know how to use Odin.
1. Download the XWJS3 PDA file, this file includes the SpeedMod K12P kernel already.
>>> DOWNLOAD LINK.
2. Download the DXJPB modem file below, and extract the .tar file inside the .7z file (DXJPB modem is from the DXJPE rom).
3. Flash the XWJS3 PDA tar as PDA using Odin, and DXJPB modem tar as MODEM.
No re-partition, no PIT.
4. Now you should get XWJS3 PDA and DXJPB modem, but no CSC.
5. Download the file below - it is a 7zip file that contains update-csc-olbjpa-xsp.zip. Extract the file update-csc-olbjpa-xsp.zip and put that in your internal SD card.
6. Reboot into the CWM Recovery and choose "Install ZIP, choose zip", then choose the update-csc-olbjpa-xsp.zip file above.
7. Now reboot your phone again and you should have the OLBJPA CSC with the XSP sales code selected.
----- About the CSC -----
The attached update-csc zip file contains a modified XSP sales code which has the APNs and MMS settings for all operators in the OLBJPA CSC - so that's all operators in Southeast Asia. I made this for my own convenience as I swap SIM cards from several countries a lot, but I figured it will be useful for most people living in SEA.

Reserved for future use.

Any possibility to have the native locale as SEA instead of Euro based?

just what i was looking for. nice one hardcore!

I got Force Close after lagfix, it seems only happen to I9000XWJS3 - "the process com.android.phone has stopped unexpectedly. please try again" any idea?
P.S: It works fine if only "Root", happen like this after lagfix has been done, I had tried to wipe all, reflash rom etc, it still happen same. has flash back to I9000DXJPE...

haha.. this is what im asking! thanks!

Thank u very much, Hardcore.
I've posted sometime ago in your Speedmode thread to ask u if u mind to share your rom, modem and csc. Finally... Happy to see this.

Hi Hardcore ,
would you add JPJPG modem to XWJS3 ? I think this is the way that lead us to have persian/arabic support on this rom...
Thanks a lot.

maybe u should format your internal memory card
darychia said:
I got Force Close after lagfix, it seems only happen to I9000XWJS3 - "the process com.android.phone has stopped unexpectedly. please try again" any idea?
P.S: It works fine if only "Root", happen like this after lagfix has been done, I had tried to wipe all, reflash rom etc, it still happen same. has flash back to I9000DXJPE...
Click to expand...
Click to collapse

darychia said:
I got Force Close after lagfix, it seems only happen to I9000XWJS3 - "the process com.android.phone has stopped unexpectedly. please try again" any idea?
P.S: It works fine if only "Root", happen like this after lagfix has been done, I had tried to wipe all, reflash rom etc, it still happen same. has flash back to I9000DXJPE...
Click to expand...
Click to collapse
i got that too when i tried doc's 9.1 dxjpe and hardcore's modified csc. doc said it was an issue but will address later.

amir_rafie said:
Hi Hardcore ,
would you add JPJPG modem to XWJS3 ? I think this is the way that lead us to have persian/arabic support on this rom...
Thanks a lot.
Click to expand...
Click to collapse
The modem has nothing to do with persian/arabic support.
Anyway, I believe webstar1 has done something. Go check out his thread.
Sent from my GT-I9000 using XDA App

Will it display chinese?

Will this work for AT&T Captivate

In fact I had did that each time when I flash new rom, it still same...

Yeah... This answer the mistery behind hardcore's mixed ROM status... Really what I'm looking for... Thanks hardcore...

@hardcore
Thanks for the rom - works great.
I seem to have a problem now with text messages not being correct.
Ex: Should say Power Off on menu, but says Sound is On.
My csc version says unknown.
Any ideas?

Seifer1975 said:
Will it display chinese?
Click to expand...
Click to collapse
Yes but no chinese input. Mighty be worth having a patch for that.

gcrutchr said:
@hardcore
Thanks for the rom - works great.
I seem to have a problem now with text messages not being correct.
Ex: Should say Power Off on menu, but says Sound is On.
My csc version says unknown.
Any ideas?
Click to expand...
Click to collapse
U might have used a modified resource apk like a battery icon mod. U have to make a new one matching this rom.

Thanks. I did use a JPY framework-res.apk. Will make a new one.

hardcore said:
Yes but no chinese input. Mighty be worth having a patch for that.
Click to expand...
Click to collapse
I am using the swype that has chinese input. So if I copy that over, I assume there should be chinese input right?

Jelly Bean wifi calling apk

Can someone please share this for me? I am using the i9300 and having wifi calling will be a real improvement for me. I've tried searching, all I get so far is that the apk works only on touchwiz (which is what I have), but nobody's put up a link to this mythical thing

It only works for Tmobile, if you're using international S3 it won't work.
It's not just a apk, it's in the framework too.
Powered by the SGSIII

ThC23 said:
It only works for Tmobile, if you're using international S3 it won't work.
It's not just a apk, it's in the framework too.
Powered by the SGSIII
Click to expand...
Click to collapse
I am on an Omega Jelly Bean ROM on t-mobile, with the i9300 variant. Don't I check all the right boxes? I thought the framework that it needed was part of touchwiz?

its way way more complicated then what you think it is.
Sent from my SGH-T999 using xda premium

The pack has to be built for touchwiz because of the libs used to make it work.
You need the wifi calling provisioning or it won't route the UMA traffic over the right T-Mobile gateway.
Files:
system/app/com.android.kineto.apk
system/lib/libganril.so
system/lib/lib_ril_switch.so <--- may be custom modded for vendor (ie: Samsung, HTC etc)
system/lib/libkineto.so
system/lib/libreference-ril.so
system/lib/librilswitch.so
There may or may not be other files but you can see it's not just an APK.

datafoo said:
The pack has to be built for touchwiz because of the libs used to make it work.
You need the wifi calling provisioning or it won't route the UMA traffic over the right T-Mobile gateway.
Files:
system/app/com.android.kineto.apk
system/lib/libganril.so
system/lib/lib_ril_switch.so <--- may be custom modded for vendor (ie: Samsung, HTC etc)
system/lib/libkineto.so
system/lib/libreference-ril.so
system/lib/librilswitch.so
There may or may not be other files but you can see it's not just an APK.
Click to expand...
Click to collapse
Thank you, that's a great start! When I get back home today, I'll take a stab at extracting these from a T999 update and try it out. If it works, I'll see how complicated creating an update.zip is and package it.

datafoo said:
The pack has to be built for touchwiz because of the libs used to make it work.
You need the wifi calling provisioning or it won't route the UMA traffic over the right T-Mobile gateway.
Files:
system/app/com.android.kineto.apk
system/lib/libganril.so
system/lib/lib_ril_switch.so <--- may be custom modded for vendor (ie: Samsung, HTC etc)
system/lib/libkineto.so
system/lib/libreference-ril.so
system/lib/librilswitch.so
There may or may not be other files but you can see it's not just an APK.
Click to expand...
Click to collapse
That is a start but im afraid that's about all it is. You'd also need wificall.apk (com.movial.wifiicall) and probably some binary files.
Also, even if you managed to get all the correct files, you would then need to port the code over to settings so you can use it. There is also probably code in systemui, framework, etc. I just doubt that simply flashing the files to your phone will work...unless the i9300 version of tw has it already and you just need it to work for tmobile. I dont think itll be a quick or easy thing to do.
Sent from my SGH-T999 using xda app-developers app

Please read forum rules before posting
Questions go in Q&A
Thread moved
Thanks
FNM

find wifi calling
sarathmenon said:
I am on an Omega Jelly Bean ROM on t-mobile, with the i9300 variant. Don't I check all the right boxes? I thought the framework that it needed was part of touchwiz?
Click to expand...
Click to collapse
Did you check under settings? On late model phones it's not an apk, but built into the phone.
kb

It is possible to get wifi calling on your i9300. As seen here http://www.youtube.com/watch?v=ZHhjduFCCug] need to flash a T-Mobile S3 ROM on your phone. Much more simply than the methods discussed above.

anteko said:
It is possible to get wifi calling on your i9300. As seen here http://www.youtube.com/watch?v=ZHhjduFCCug] need to flash a T-Mobile S3 ROM on your phone. Much more simply than the methods discussed above.
Click to expand...
Click to collapse
If the OP follows your instructions, he will have a brick.

[Q] The bests rom

Hi
What are the bests ROM for an Ace 2?
I heard CM, AOKP have little bugs. I want a very stable and bugfree one.
I will flash CM11 when it will be bugfree and stable but it isn't the case and I can't continue with ROM Stock. :S
And if I flash Italian Job (I'm on stock MC8 with a i8160P with non-p flashed rom), do I have to assert lines in updater script?
Thanks

CM10.1 for now.
Sent from my GT-I8160 using XDA Premium 4 mobile app

First wrong section use Q&A section
Second there's already a Thread answerig this question on generel forum it's one of the firsts Threads wirh name All Ace II firmwares for normal P and L or so.

str3tch72 said:
CM10.1 for now.
Sent from my GT-I8160 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It has little bugs, isn't it?
And if I flash Italian Job (I'm on stock MC8 with a i8160P with non-p flashed rom), do I have to delete assert lines in updater script?

Samwix26 said:
It has little bugs, isn't it?
And if I flash Italian Job (I'm on stock MC8 with a i8160P with non-p flashed rom), do I have to delete assert lines in updater script?
Click to expand...
Click to collapse
1: absolutely zero known bugs (apart from the default theme being very lame in my personal opinion )
2: If recovery uses the build.prop from the main system, there would be no need to. I'd personally do it anyway because then I can just have one zip that will always work...

Ryccardo said:
1: absolutely zero known bugs (apart from the default theme being very lame in my personal opinion )
2: If recovery uses the build.prop from the main system, there would be no need to. I'd personally do it anyway because then I can just have one zip that will always work...
Click to expand...
Click to collapse
I see anyone lost network when he receive incoming call of a private number he has to reboot for fix that..

Samwix26 said:
I see anyone lost network when he receive incoming call of a private number he has to reboot for fix that..
Click to expand...
Click to collapse
Never happened to me in the 2 weeks I used it... also remember that on P models you need to replace the RIL

RIL?
Did you receive incoming calls of privates numbers?
Do u have P version? What's you baseband if yes?
With P version, I only have to delete assert lines in updater-script.txt (how to?) and copy tee folder, isn't it?
Thx

Samwix26 said:
RIL?
Did you receive incoming calls of privates numbers?
Do u have P version? What's you baseband if yes?
Click to expand...
Click to collapse
Nope, standard model here (from the first and probably last giveaway I won...)
Most ROMs are for the normal model and will get blank IMEI if used on the P model, so you must manually replace
libreference-ril.so libril.so libsecril-client.so libsec-ril.so
somewhere under /system/lib with ones from a P ROM

Ryccardo said:
Nope, standard model here (from the first and probably last giveaway I won...)
Most ROMs are for the normal model and will get blank IMEI if used on the P model, so you must manually replace
libreference-ril.so libril.so libsecril-client.so libsec-ril.so
somewhere under /system/lib with ones from a P ROM
Click to expand...
Click to collapse
But With P version, I only have to delete assert lines in updater-script.txt (how to?) and copy tee folder, isn't it?

Just copy tee folder.if any problems ask in q&a
Sent from my GT-I8160 using Tapatalk

I don't have to delete assert lines? Or it's only with CM10.2?

Samwix26 said:
I don't have to delete assert lines? Or it's only with CM10.2?
Click to expand...
Click to collapse
Try it as is and if it fails... remove the line and try again
(unzip the ROM, go to META-INF\com\google\android\updater-script, remove the long line starting with assert(getprop, recreate the zip and flash as usual)... and if on Windows you must use some editor compatible with Linux terminators like Metapad, Notepad++ or Programmer's File Editor!

Last question..
Does Kyrillos is best than Italian Job ?
because if I flash Me1 3 parted for P version then MG2 i8160p for install Kyrillos I will not come back to MC8 because it will be to looooong

Samwix26 said:
Last question..
Does Kyrillos is best than Italian Job ?
because if I flash Me1 3 parted for P version then MG2 i8160p for install Kyrillos I will not come back to MC8 because it will be to looooong
Click to expand...
Click to collapse
I personally prefer it. In fact, I don't even remember if I was ever able to install The Italian Job, it always rejected the file or didn't boot... but I was a complete Android noob back then...

Ryccardo said:
I personally prefer it. In fact, I don't even remember if I was ever able to install The Italian Job, it always rejected the file or didn't boot... but I was a complete Android noob back then...
Click to expand...
Click to collapse
When you say "it" you're talking about Kyrillos? xD

I'm still on build from 17/11. Absolutly bugfree.
Sent from my GT-I8160 using XDA Premium 4 mobile app

I will flash Kyrillos V9 then CM11.

CM is still best. With Stone Kernel and TwinTurbo it is really a rocket.
Sent from my GT-I8160 using XDA Premium 4 mobile app

But battery isn't good..

At&t 4g lte icon on tmobile note 4

Well I got the lollipop at&t 4g lte icon product name from TEKHD and it works good and i noticed it also takes off the sfinder and quick connect.
If you guys wanna try it out you need build.prop and edit this two lines and reboot.
ro.product.name=trlteuc
ro.product.device=trlteatt

All I had to change was product.name=to trlteatt nothing else unless your on Canadian firmware

This has actually been posted and discussed before in several forums. You can also try
trltevzw - verizon
Trltespr - sprint
Trltexx - international
And a few more that I can't think of right now.

do I need to be rooted to do this? i tryed but it is read only.

Build.prop editor works best with root.
Is there a wat I can get the LTE icons and kill "ATT" like in Gravity Box. I'm on TEK rom and love it, but the carrier text tweak is not killing the "ATT"

One thing that tripped me up was the persistent gap in the layout. In a Doh moment I figured out it was the spot for the download booster ucin, typically shut off.

Working, thanks a lot. All i changed was product name too

Has anyone figured out how to get this to work on 5.1.1 roms?

blane3298 said:
Has anyone figured out how to get this to work on 5.1.1 roms?
Click to expand...
Click to collapse
x2 on it.....it seem that with 5.1.1 update it is not anymore possible to make these change.....

zxaz said:
x2 on it.....it seem that with 5.1.1 update it is not anymore possible to make these change.....
Click to expand...
Click to collapse
Along with the build prop edits you must also change the sale_code.dat file in the csc folder from tmo to att. Works on the latest Tek rom. I'm using one from a stock Att Rom, but editing the file with file explorer, etc..may work as well.

I'd like to see screen captures of the different logos....they may all suck? LOL

bigron77 said:
Along with the build prop edits you must also change the sale_code.dat file in the csc folder from tmo to att. Works on the latest Tek rom. I'm using one from a stock Att Rom, but editing the file with file explorer, etc..may work as well.
Click to expand...
Click to collapse
i can confirm that"s it work perfectly on 5.1.1 stock rom.......bigron77 your the man!! after 6 month you finally solve the mystery...lolll

zxaz said:
i can confirm that"s it work perfectly on 5.1.1 stock rom.......bigron77 your the man!! after 6 month you finally solve the mystery...lolll
Click to expand...
Click to collapse
Does changing these files have any effect on anything other than just icons? Would changing tmo to vzw affect any other things because of gsm/cdma differences?

on my side, i have a sm-n910w8 wich is a canadians version....it worked perfectly!! i alway liked to have the carrier id on the status bar (i"m a rare one i guess loll) it didn"t change anything about the gsm/cdma thing...

well....have installed marshmallow on my note 4......have tested to see if we still able to change the data icon...and onm my side on stock rom android 6 i"m not able anymore to change anything....i change the ro.product.name and the sale_code.dat and it change nothing???? somebody have tested it to see???
thanks.......

Is this possible with MM 6.0.1 n910t?
Sent from my SM-N920G using XDA-Developers mobile app

should have made an update since my last thread......i"ve marshmallow on my note 4...you can"t change the build.pro to have for example the at&t data icon since marshmallow is still not available for the note 4....this is why the build.pro change mod doesn"t work......

Well.....saw that att upgraded finally the note 4 to marshmallow....have made a trie to have the att data icon by the build.prop.....it didn't worked.....maybe i made something wrong?? Someone had succes to make the change?
Thanks in advance.........

mr pnut said:
Well I got the lollipop at&t 4g lte icon product name from TEKHD and it works good and i noticed it also takes off the sfinder and quick connect.
If you guys wanna try it out you need build.prop and edit this two lines and reboot.
ro.product.name=trlteuc
ro.product.device=trlteatt
Does this work for the new bootloader mm?
Click to expand...
Click to collapse

mbr007 said:
mr pnut said:
Well I got the lollipop at&t 4g lte icon product name from TEKHD and it works good and i noticed it also takes off the sfinder and quick connect.
If you guys wanna try it out you need build.prop and edit this two lines and reboot.
ro.product.name=trlteuc
ro.product.device=trlteatt
Does this work for the new bootloader mm?
Click to expand...
Click to collapse
it didn"t work on mine....stock marshmallow rom
Click to expand...
Click to collapse