Develop Bugs

[App][Mod][Script] switch modem anytime anywhere (EDIT: 201011102047HKT csc added)

i made this little update.zip just for testing with different modems anytime i want to, so it may be useless to most of u guys but i think some ppl may need it in some cases
the attached is ONLY a skeleton, the modem file inside the zip is an empty file
usage:
- open the update-modem-xxx.zip file and drag the modem.bin u want to flash in the zip and replace the zero size modem.bin in it (no need to chg other files), close the zip and that's all
- make copies of zip file for different modems if u wish (sorry but no time to make fancy file selection at the moment)
- flash the modem by selecting ur desire modem in cwm under /sdcard (pls refer to cwm page for how-to)
- no need to worry about recovery2e or 3x coz as long as u can run cwm, u r with recovery2e (or others in the future)
so possibilily, u can have update-modem-jpp.zip, update-modem-jpa.zip, and so forth
and for me, i've the following files on my sdcard:
update-modem-I9000XWJPA.zip
update-modem-I9000XXJPP.zip
update-modem-I9000ZSJP8.zip
update-modem-I9000ZSJPE.zip
why?
- provides a way to let u switch modem if u suspects the modem causes problems
- see if u can find the best modem for u
how?
- the modem will be flashed with redbend_ua, a direct write to ur phone's /dev/block/bml12
Note: ur phone will flick 2 or 3 times during flash
WARNING: i tested it on my phone with JPx, froyo 2.2 on galaxy i9000 only. I cannot say it's 100% safe although i flashed my phone a lot of times, so use it at your own risks
Also note that there will be NO updates in the future
EDIT: the redbend_ua is taken from somwhere, all credits go to the modder

+1 for this. Can i use this to change my csc too?
Sent from my GT-I9000 using XDA App

ragin said:
+1 for this. Can i use this to change my csc too?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i've an update file to custom csc also

Can you post that? Please.
Sent from my GT-I9000 using XDA App

Very useful.
Thank you

Can somebody compile a zip file with JPE modem inside? I'm outside of my town for this week and I wanted to test JPE Modem, I just have my phone with me.
Please, thanks!

efegue said:
Can somebody compile a zip file with JPE modem inside? I'm outside of my town for this week and I wanted to test JPE Modem, I just have my phone with me.
Please, thanks!
Click to expand...
Click to collapse
here it is

ragin said:
Can you post that? Please.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
sure and attached
but i wonder why u need that coz the csc can be easily replaced
anyway, open the zip file, change all TGY (Hong Kong) to ur country/sales code, as well as rename the TGY directory to ur country/sales code. however, i've remove all localized apps from the csc (ie nothing except sales code, so u'll have to add urs if u want to)
Note that it does not "flash" anything to ur phone, instead it will create custom csc files on /system and /system/csc only

Thanks a lot ykk_five!!

OP, you could also just for "fun" include a .bat file, signapk.jar, testkeys and allow the user to drop in any modem and run the .bat to get a signed zip (ofcourse im targetting 2e users when i say this).

does anyone have specs on the modems signals ?
currently on jpo firmware and signal is very low
its not very good at home anytime with o2 but it would be nice to try them all to see if i get better reception .
has anyone compiled a full list of available modem files for froyo

ykk_five said:
sure and attached
but i wonder why u need that coz the csc can be easily replaced
anyway, open the zip file, change all TGY (Hong Kong) to ur country/sales code, as well as rename the TGY directory to ur country/sales code. however, i've remove all localized apps from the csc (ie nothing except sales code, so u'll have to add urs if u want to)
Note that it does not "flash" anything to ur phone, instead it will create custom csc files on /system and /system/csc only
Click to expand...
Click to collapse
Thanks for your effort, my problem is I keep flashing ROMS, & even the so called BIG APN list doesn't list all the providers of India. I use 2 of them & while with one I dont have a problem, with the other, I always need to feed APN settings everytime. I am an Architect, trigger happy & looking for readymade solutions so that I get more time for my profession.
Will you please do up a flashable update.zip for India? I can just flash it & all my settings are again correct.
Thanks again.
PS : If this can become like a repository of various modems & csc's, could be a HIT with people like me.

can someone give me the i9000ORO modem file ? i have jpa ver on my phone.
thx!

ragin said:
Thanks for your effort, my problem is I keep flashing ROMS, & even the so called BIG APN list doesn't list all the providers of India. I use 2 of them & while with one I dont have a problem, with the other, I always need to feed APN settings everytime. I am an Architect, trigger happy & looking for readymade solutions so that I get more time for my profession.
Will you please do up a flashable update.zip for India? I can just flash it & all my settings are again correct.
Thanks again.
PS : If this can become like a repository of various modems & csc's, could be a HIT with people like me.
Click to expand...
Click to collapse
i see...
i'm afraid not coz it requires some works to make a rom/kernel for a specific country

gt i9000m
can anyone provide modem for the galaxy s for bell . i use a rogers sim? but i have very poor signal .

If I am going to USA, which modem should I use (i.e. which modem is from a US version firmware)?

[RELEASE] Froyo DXJPA one-step flash package

Okay people, its done!
This is the procedure and firmware package for a single-step flash to DXJPA using Odin:
http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install-froyo.html
If you flash using that procedure, you should get a 'stock' DXJPA phone will all DX-series CSCs. Unfortunately, it *will* do a factory reset / wipe data.
DXJPA is the official Froyo for the Southeast Asian region: Singapore, Indonesia, Malaysia, Thailand, Vietnam, Philippines.
DXJPA is tricky because it really needs PIT 513 (it's the only ROM, as far as I know), probably because the /system partition size needs to be very big for the carrier customizations.
I've basically combined the missing parts from DXJPA with the files from the original DXJG4 and used the correct PIT.

Bro, thanks. now downloading from multiupload site. going to try flashing directly through odin1.7 with pit513 directly and will report back to see if successful or not.
btw, time to change your signature?
p/s: is it okay to use your k7 kernel on this rom?
edit: looking at the downloaded file from Richtofen, the modem.bin is missing. hmm....
edit2: after reviewing, i am using your package to flash.

No bro, you should use my download link. All the other packages have the wrong dbdata and the CSC wont work properly - unless u do the 2 step from DXJG4 to DXJPA.

Hey bro. Did you find any significant changes between this ROM compare to ADJP5 like does it work better with your kernel? Just curious.
Thanks!

danzgrace said:
Hey bro. Did you find any significant changes between this ROM compare to ADJP5 like does it work better with your kernel? Just curious.
Thanks!
Click to expand...
Click to collapse
ADJP5 is from another region. The DX series is for Southeast Asia. And yup, it works with my kernel too - all Froyo ROMs work.

hardcore said:
No bro, you should use my download link. All the other packages have the wrong dbdata and the CSC wont work properly - unless u do the 2 step from DXJG4 to DXJPA.
Click to expand...
Click to collapse
yeah, i notice a huge difference in the dbdata.rfs as well as the cache.rfs. The cache.rfs should be containing all the bloatware apps i presume.
now flashing, almost done now.
give me sometime, and i will do the batterymod if anyone is interested.

Someone needs to work on customizing this ROM so we can save more space.

hmm, seems to get stuck at bootup screen, but no black screen yet. will wait a bit longer, and get into recovery to wipe cache, do a factory reset.
edit: just booted up. haha...

need a fast server
Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can't access a file after 24 hours, contact your domain administrator.

hardcore, posted this in the other thread. posting here again:-
is it possible to convert this to cwm package (like how doc rambone does with his jpa/jpo roms) so that it can be flashed without wiping out all the data and settings?

s88 said:
need a fast server
Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can't access a file after 24 hours, contact your domain administrator.
Click to expand...
Click to collapse
Is that error from blogspot, or from Google Docs?
BTW, please let me know if you can't download the file. Google Docs should be super fast but I'm not sure if they'll block it after a while...

g00ndu said:
give me sometime, and i will do the batterymod if anyone is interested.
Click to expand...
Click to collapse
Sure I'm interested! Version D please.

hardcore said:
Sure I'm interested! Version D please.
Click to expand...
Click to collapse
Check the battery mod thread.. Wrote a new tutorial..

Downloading... Can't update my galaxy s asian version from kies.

Google Docs, i try again and is able to download now
hardcore said:
Is that error from blogspot, or from Google Docs?
BTW, please let me know if you can't download the file. Google Docs should be super fast but I'm not sure if they'll block it after a while...
Click to expand...
Click to collapse

Thanks Hardcore. Hope someone will cook a custom based on this firmware for us!
PS - I cant download either

you can use mediafire.com

epicurean said:
Thanks Hardcore. Hope someone will cook a custom based on this firmware for us!
PS - I cant download either
Click to expand...
Click to collapse
If you can't download, try again in a while.
In the meantime I will try to upload it to multiupload but that also takes a long time!

Installed!! Working fine..

hardcore said:
If you can't download, try again in a while.
In the meantime I will try to upload it to multiupload but that also takes a long time!
Click to expand...
Click to collapse
I'm going to upload to my server in a while and will post the link here after its done, won't have any limitations

[ROM] Roto JMG Pre-Rooted Firmware v1 [Deprecated]

This has a bad wifi bug, lets drop it and shuffle on to JMI!
Finally, Roto-JMG!. My development/jtag Tab was stuck in my luggage in Frankfurt due to all the flight cancellations, but Lufthansa delivered it to me at my home at 2am I was actually pleased to be woke up from a sound sleep, thanks!
I've created this for folks who want a safe and easy to install firmware.
This firmware is for any NA, Euro or Asian GSM Tab. They don't contain and won't install protected bootloaders.
All the files are here:
http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JMG/
Note:Please backup your apps and settings with Titanium Backup from the market.
Write down ALL your current APN settings in Settings/Wireless/Mobile/Access Point Names/, the one with the green dot next to it. There is 14 settings in all.
New Jan 30, 2011 Roto-JMG-v1
Fixes:
Stock JMG Swype (fullscreen version FC's sorry)
Added OpenVPN
Added cifs.ko
Added slow-work.ko
Added tun.ko
Added Ebook app
Added car home
Added all language locales
Added AppWidgetPicker
Added module loader script
Added perf tweaks
Full version wipes sdcard if corrupt
Code:
81cb74c5a2c173c8feaaf1b6649d1bd6 Roto-JMG-Full-v1.zip
9449a7eb4de1067488100ad2e16ee541 Roto-JMG-Upgrade-v1.zip
If you already flashed Roto-JME (upgrade or full), just re-flash with the Roto-JMG-Upgrade-v1.tar to get the new apps and not loose any settings.
(other than the home screen, but you can restore that from Titanium Backup right?)
The best option is to backup all your data/apps, flash Roto-JMG-Full-v1.tar with the PDA button and partition with P1_add_hidden.pit. Flash the any modem of your choice with the Phone button as well as its going to be erased due to partitioning. Thats a nice clean setup, guaranteed to work the best
Use the upgrade if you already have a lot of apps installed and you feel lucky. Don't use the pit file with the upgrade firmware. Worst case is you flash the whole enchilada later. Backup your data anyways before hand.
Flash using Odin, using PDA button for any file you flash. If you need/want to flash the addons too, use the PHONE and CSC buttons, they all do the same thing.
Simple how-to guide here:
http://forum.xda-developers.com/showthread.php?t=895827

Wow thanks for that. Just a question before I try this out - can I flash this if I have modacos kernal w ext4 conversion? Do I still use the .pit file?
Sent from my GT-P1000 using XDA App

Hi Roto,
Big THX for this and one question: What about Swype in different languages, like German?
In V4 I was a little bit dissapointed not having my german Swype......

irrelevancy said:
Wow thanks for that. Just a question before I try this out - can I flash this if I have modacos kernal w ext4 conversion? Do I still use the .pit file?
Click to expand...
Click to collapse
I haven't tried any ext4 firmwares yet, so I don't actually know. I'd assume you'd have to flash Roto-JMG-Full with the .pit file. I'm sure someone will chime in soon with the answer.

jammysunny said:
Hi Roto,
Big THX for this and one question: What about Swype in different languages, like German?
In V4 I was a little bit dissapointed not having my german Swype......
Click to expand...
Click to collapse
In general I'm disappointed with Swype being so tied to the firmware. Roto-JMG has the stock Swype which includes German. I really want to remove it altogether to reclaim 11mb of valuable space, but we'll see.

OKAY, so i flash your FW now
In V4 I tried to remove the original Swype in order to install my Swype Version, but it failed by uninstalling it "This Software cant be removed"
Maybe you manage this removing of Swype, so users like me can install this later.....

Do we know of any differences between JMG vs KM2?

Was loving and living on JMEv4, downloading now, thank you for your work sir.
you have made my tab alot more fun to use.
I saw and used an app i believe is free, backup APN, maybe include in the release, make it easy for the noobz....
alot easier then writing down all the info.
and or, some way of using the APN file from CM which im sure is open source and includes like 600 APNs...
just thinking outloud.
It is greatly appreciated.
regards,
Killster

Thanks for your work Rotohammer, works smooth!
I cannot seem to find a Chinese locale, is it availeable in this rom or should I look into other roms for this language? Thanks again!

It's working fine CF-Root for JME break autobacklight... and the eBook reader it's not present in the update can you upload it? Thank you!

rotohammer said:
I haven't tried any ext4 firmwares yet, so I don't actually know. I'd assume you'd have to flash Roto-JMG-Full with the .pit file. I'm sure someone will chime in soon with the answer.
Click to expand...
Click to collapse
I've flashed back to jme full+pit+cfroot with odin1.7 from modaco+ext with no problems, once you've flashed cfroot you can then boot into recovery and directly flash modaco+ext.

Noticeably faster than jmev4 at least as far as I can tell. So far the only thing I am missing is full screen swype.
Sent from my GT-P1000 using XDA App

ondoteam said:
It's working fine CF-Root for JME break autobacklight... and the eBook reader it's not present in the update can you upload it? Thank you!
Click to expand...
Click to collapse
It was in there, but the flash space is tight and it didn't all fit. I'm re-uploading a fixed version, grab the Upgrade file.

Flashed running great, hope to see a ext4 vesion soon!

Great job Roto. Tnx. I was thinking about the next version if it would be possible to include Shutdown.apk from ♫ Overcome v1.0.2 ♫ JMG Base ♫. That one has few more options like: reboot/recovery/download. I think they could be quite useful at least for me.
Thanks.

ondoteam said:
It's working fine CF-Root for JME break autobacklight... and the eBook reader it's not present in the update can you upload it? Thank you!
Click to expand...
Click to collapse
Upgrade went perfect from JMEv4... But as stated, no ebook reader.
Thanks again for your work Roto...
I know i keep asking, but with the RotoBackup, isnt there something you can make, or put in the marketplace? to do all that?
Regards,Killster

killster said:
Upgrade went perfect from JMEv4... But as stated, no ebook reader.
Click to expand...
Click to collapse
I re-packaged the tar file, and now the ebook app works for me. Just re-download the upgrade and reflash it and the ebook will work.
killster said:
I know i keep asking, but with the RotoBackup, isnt there something you can make, or put in the marketplace? to do all that?
Click to expand...
Click to collapse
Im trying, but unfortunately real work has to come first. This may be the last firmware I play with as now we have some other cool ones to choose from.

rotohammer said:
..... This may be the last firmware I play with as now we have some other cool ones to choose from.
Click to expand...
Click to collapse
Wow... Waiting for the other cool stuff from You, Bro.
Take Care.
KC

Anyone tried GPS?
Should be finally fixed!
At least on my Gtab I get a GPS fix in less then 5 seconds (in my room)

There are so many new roms sprouting up lately but I've been putting off flashing anyone of them.... waiting for yours to show up because you are my most trusted!! Flashed the update without any problem, and as usual.... smooth & crispy, so far so good Thanks again Roto!!!!!!

[ROM] enhanced236 - Paypal issue

Dear,
Yesterday I have installed the enhanced236 ROM.
I can't find or install Paypal from the market or the Paypal-site.
What i tried bymyself:
Install an other ROM (GIO Speedo and Light Orange); I don't have this issue. I can install Paypal
Today i went back to the enhanced236 MOD and i have again the problem: No Paypal. Not from the market not from the site.
message:
This device is not compatible
-Did I something wrong?
-Is there anything I can do to have paypal on my Gio with the enhanced236 MOD?
This is my first message so I hope it is posted in the correct forum. Don't shoot me when it's not.

I can install it just fine over here on my ROM ... You can try one of these methods here: http://forum.xda-developers.com/showthread.php?t=1397661.

coccolino_dbro said:
I can install it just fine over here on my ROM ... You can try one of these methods here: http://forum.xda-developers.com/showthread.php?t=1397661.
Click to expand...
Click to collapse
Thank you for your quick response.
I tried option 1 and 3.
Both solutions don't work for me.
I can find it in the market but still the message: Not compatible wit your device

Don't know if it's the case, but have you wiped data/reset during installation?
Or, it may have something to do with the CSC - default in the ROM is a romanian one, and since you obviously have another provider, it may conflict.
You can try to find a CSC for your country/operator and manually install it (copy the files to /system partition); unfortunately, automatic CSC selection only works with stock recovery and RFS filesystem.

coccolino_dbro said:
Don't know if it's the case, but have you wiped data/reset during installation?
Or, it may have something to do with the CSC - default in the ROM is a romanian one, and since you obviously have another provider, it may conflict.
You can try to find a CSC for your country/operator and manually install it (copy the files to /system partition); unfortunately, automatic CSC selection only works with stock recovery and RFS filesystem.
Click to expand...
Click to collapse
WOW............ thats sounds new for me. This will take some more time.
I will google for a new CSC and after that i will try.
Please have some patience for a response, as i said: this will take some time and understanding. Since this week i tried to install a custom rom so i have to learn a lot.
Again, Thank you.
Your help is appreciated!
Sorry for bad english

Maybe you can download a modded play store on xda. I had the same problem when I tried cm9
Sent from my GT-S5660 using xda premium

Remember that most CSC changing guides use the automatic way (dial a certain code etc.) - it will not work on roms that use other recoveries/filesystem format. I can help you to manually add your CSC after you find the appropiate one.
Hint: look for a firmware for your country or even branded for your operator, if it exists. You can extract from there.

vangerken said:
Maybe you can download a modded play store on xda. I had the same problem when I tried cm9
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
Thank you for your response.
I found one but it doesn't solve the 'problem'. :crying:

coccolino_dbro said:
Remember that most CSC changing guides use the automatic way (dial a certain code etc.) - it will not work on roms that use other recoveries/filesystem format. I can help you to manually add your CSC after you find the appropiate one.
Hint: look for a firmware for your country or even branded for your operator, if it exists. You can extract from there.
Click to expand...
Click to collapse
Thank you again.
I think i have to give it up. This is, on this moment, a level too high. Maybe I have to install another ROM like Light Orange or so. It's also a nice ROM and a high antutu benchmark. Light Orange = 1824, Enhanced236 = 1835
Both ROMS are fast. The enhanced236 looks nicer........
You are great help! :good:

EdRo01 said:
Thank you again.
I think i have to give it up. This is, on this moment, a level too high. Maybe I have to install another ROM like Light Orange or so. It's also a nice ROM and a high antutu benchmark. Light Orange = 1824, Enhanced236 = 1835
Both ROMS are fast. The enhanced236 looks nicer........
You are great help! :good:
Click to expand...
Click to collapse
If the problem its for compalibility of country, why dont you use market enabler? Its free on market ;D
Enviado desde mi GT-S5660 usando Tapatalk 2

No i don't think it is a compatibility problem. I tried the market enabler. It didn't solve the problem.
Thank you for you answer.
Sent from my GT-S5660 using xda app-developers app

try to get the app from another site and install it. But before, enable Install from other locations (it is an option to enable installation of apk files that are not from the market). I had the same issue with other apps and it worked for me

I already install the light orange rom. That one works fine too.
Thank you for your response
Sent from my GT-S5660 using xda app-developers app

[Q] N7100 - Working and stable call reception

Hi! This is my second question in this forum ... I just want to thank all of you posters as a lot of these posts has been useful for me!
My question:
Android 4.3/4.4/4.4.2
Modems: XXDME4, DDDMG1, XXEMJ5, and many more.
I've been struggling with bad reception on my N7100 (Nordic) for a while ... I can make and receive calls, but when it's like 50% signal it's almost no use and the sound is laggy and poor... I've tried a lot of different ROMs and modems here.
Android 4.1.2
Modem: DDDMG1
I tried Moon Rom with this android version and the reception and caller sound was working perfectly in the same places where it was poor with the other Roms.
So the voices and sounds are perfect with this ROM ... But I don't want to back to the "stone age" (4.1.2).
Does anyone have any working modem for me with (hopefully) a 4.4.2 ROM or a 4.3 ROM (that I can live with) ?
Or any other answer to why it's not working good with newer android versions?

Not sure this will helps from http://opensignal.com , good luck.
Sent from my GT-N7105 using Tapatalk

No, that doesn't help. I think it has something to do with the modem ...

thasnes said:
No, that doesn't help. I think it has something to do with the modem ...
Click to expand...
Click to collapse
I experience the same with Faria's deknoxed stock 4.3 ROM.
Almost impossible to surf the web, without wifi. It sux....

You will always get a better signal/ call quality if you flash the appropriate modem for your country. Most carriers have their own modem/csc file.
Sent from my GT-N7105 using XDA Premium 4 mobile app

same issue here
since i install the Probam Kit Kat 4.4 rom my signal never be the same. I used various roms and modems combinatios but still dont have the quality of the signal thay i used to be. Also lost my mic and charging port in the process. someone has to take a look at that rom.

thasnes said:
Hi! This is my second question in this forum ... I just want to thank all of you posters as a lot of these posts has been useful for me!
My question:
Android 4.3/4.4/4.4.2
Modems: XXDME4, DDDMG1, XXEMJ5, and many more.
I've been struggling with bad reception on my N7100 (Nordic) for a while ... I can make and receive calls, but when it's like 50% signal it's almost no use and the sound is laggy and poor... I've tried a lot of different ROMs and modems here.
Android 4.1.2
Modem: DDDMG1
I tried Moon Rom with this android version and the reception and caller sound was working perfectly in the same places where it was poor with the other Roms.
So the voices and sounds are perfect with this ROM ... But I don't want to back to the "stone age" (4.1.2).
Does anyone have any working modem for me with (hopefully) a 4.4.2 ROM or a 4.3 ROM (that I can live with) ?
Or any other answer to why it's not working good with newer android versions?
Click to expand...
Click to collapse
Try flash your own stock country 4.3.
or, copy (your country/region *check tour country csc version) csc version.txt, sw configuration on /system and your country code csc files /system/csc/your country code (contents.db,customer.xml,other.xml,sales_code) to /system/csc
dont forget set permission rw-r-r.
*sometimes your stock country firmwares dont set the csc customer.xml right. so. HD voice wouldnt turn on.

System/CSC folder?
chobztopz said:
Try flash your own stock country 4.3.
or, copy (your country/region *check tour country csc version) csc version.txt, sw configuration on /system and your country code csc files /system/csc/your country code (contents.db,customer.xml,other.xml,sales_code) to /system/csc
dont forget set permission rw-r-r.
*sometimes your stock country firmwares dont set the csc customer.xml right. so. HD voice wouldnt turn on.
Click to expand...
Click to collapse
I can't find system/csc folder Trying to look in hidden files too... Rooted with Android 4.4.2 with ProBAM 1.2.3

thasnes said:
I can't find system/csc folder Trying to look in hidden files too... Rooted with Android 4.4.2 with ProBAM 1.2.3
Click to expand...
Click to collapse
what explorer are you using? use root explorer or any explorer with root.

chobztopz said:
what explorer are you using? use root explorer or any explorer with root.
Click to expand...
Click to collapse
Yeah, I use everything ... I created the folder, though.. And when I used the app "Hidden settings for Note 2" it created a file called others.xml.. That means I don't have the other files. Where can I find these?

thasnes said:
Yeah, I use everything ... I created the folder, though.. And when I used the app "Hidden settings for Note 2" it created a file called others.xml.. That means I don't have the other files. Where can I find these?
Click to expand...
Click to collapse
i see that u use aosb.. i never use that rom and see inside of the rom. maybe tomorrow i'll download it to see. all of stock or custom stock rom use csc files

I thought I could search for the modem for my country, as sawdoctor said, and found this page.
http://www.sammobile.com/firmwares/1/?model=GT-N7100&pcode=NEE#firmware
It's only 4.3, but it actually worked much better on 4.4.2! Not as much as it can, so I will try to flash the stock 4.3 firmware first, and maybe the CSC folder will appear when I install a 4.4.2 rom. I guess I will try another one than ProBAM this time, because I couldn't send sms with it.. (Maybe that has something to do with the csc folder being gone?)

solved sms problem
I manage to solve my problem with sending sms messages.. It just didn't work in any rom, firmware or stock .. (Message not sent ... failed) So I found the answer here: http://forum.xda-developers.com/showthread.php?t=1060826
"open up Messaging, hit menu, and choose Settings. Change the field for "Message centre" to your carrier's number."
And I could also say that the calling problem is kinda solved.. The right 4.3 modem on 4.3 works, but 4.3 modem on 4.4.2 works like 90%... When in 2G mode.. = liveable.

4.4.2 modem??
After using 4.4.2 for a while, I realize that the 4.3 modem doesn't compare that well with KitKat 4.4.2.
Is there a working (nordic) modem for n7100 running 4.4.2 out there? Does anyone know??