This has a bad wifi bug, lets drop it and shuffle on to JMI!
Finally, Roto-JMG!. My development/jtag Tab was stuck in my luggage in Frankfurt due to all the flight cancellations, but Lufthansa delivered it to me at my home at 2am I was actually pleased to be woke up from a sound sleep, thanks!
I've created this for folks who want a safe and easy to install firmware.
This firmware is for any NA, Euro or Asian GSM Tab. They don't contain and won't install protected bootloaders.
All the files are here:
http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JMG/
Note:Please backup your apps and settings with Titanium Backup from the market.
Write down ALL your current APN settings in Settings/Wireless/Mobile/Access Point Names/, the one with the green dot next to it. There is 14 settings in all.
New Jan 30, 2011 Roto-JMG-v1
Fixes:
Stock JMG Swype (fullscreen version FC's sorry)
Added OpenVPN
Added cifs.ko
Added slow-work.ko
Added tun.ko
Added Ebook app
Added car home
Added all language locales
Added AppWidgetPicker
Added module loader script
Added perf tweaks
Full version wipes sdcard if corrupt
Code:
81cb74c5a2c173c8feaaf1b6649d1bd6 Roto-JMG-Full-v1.zip
9449a7eb4de1067488100ad2e16ee541 Roto-JMG-Upgrade-v1.zip
If you already flashed Roto-JME (upgrade or full), just re-flash with the Roto-JMG-Upgrade-v1.tar to get the new apps and not loose any settings.
(other than the home screen, but you can restore that from Titanium Backup right?)
The best option is to backup all your data/apps, flash Roto-JMG-Full-v1.tar with the PDA button and partition with P1_add_hidden.pit. Flash the any modem of your choice with the Phone button as well as its going to be erased due to partitioning. Thats a nice clean setup, guaranteed to work the best
Use the upgrade if you already have a lot of apps installed and you feel lucky. Don't use the pit file with the upgrade firmware. Worst case is you flash the whole enchilada later. Backup your data anyways before hand.
Flash using Odin, using PDA button for any file you flash. If you need/want to flash the addons too, use the PHONE and CSC buttons, they all do the same thing.
Simple how-to guide here:
http://forum.xda-developers.com/showthread.php?t=895827
Wow thanks for that. Just a question before I try this out - can I flash this if I have modacos kernal w ext4 conversion? Do I still use the .pit file?
Sent from my GT-P1000 using XDA App
Hi Roto,
Big THX for this and one question: What about Swype in different languages, like German?
In V4 I was a little bit dissapointed not having my german Swype......
irrelevancy said:
Wow thanks for that. Just a question before I try this out - can I flash this if I have modacos kernal w ext4 conversion? Do I still use the .pit file?
Click to expand...
Click to collapse
I haven't tried any ext4 firmwares yet, so I don't actually know. I'd assume you'd have to flash Roto-JMG-Full with the .pit file. I'm sure someone will chime in soon with the answer.
jammysunny said:
Hi Roto,
Big THX for this and one question: What about Swype in different languages, like German?
In V4 I was a little bit dissapointed not having my german Swype......
Click to expand...
Click to collapse
In general I'm disappointed with Swype being so tied to the firmware. Roto-JMG has the stock Swype which includes German. I really want to remove it altogether to reclaim 11mb of valuable space, but we'll see.
OKAY, so i flash your FW now
In V4 I tried to remove the original Swype in order to install my Swype Version, but it failed by uninstalling it "This Software cant be removed"
Maybe you manage this removing of Swype, so users like me can install this later.....
Do we know of any differences between JMG vs KM2?
Was loving and living on JMEv4, downloading now, thank you for your work sir.
you have made my tab alot more fun to use.
I saw and used an app i believe is free, backup APN, maybe include in the release, make it easy for the noobz....
alot easier then writing down all the info.
and or, some way of using the APN file from CM which im sure is open source and includes like 600 APNs...
just thinking outloud.
It is greatly appreciated.
regards,
Killster
Thanks for your work Rotohammer, works smooth!
I cannot seem to find a Chinese locale, is it availeable in this rom or should I look into other roms for this language? Thanks again!
It's working fine CF-Root for JME break autobacklight... and the eBook reader it's not present in the update can you upload it? Thank you!
rotohammer said:
I haven't tried any ext4 firmwares yet, so I don't actually know. I'd assume you'd have to flash Roto-JMG-Full with the .pit file. I'm sure someone will chime in soon with the answer.
Click to expand...
Click to collapse
I've flashed back to jme full+pit+cfroot with odin1.7 from modaco+ext with no problems, once you've flashed cfroot you can then boot into recovery and directly flash modaco+ext.
Noticeably faster than jmev4 at least as far as I can tell. So far the only thing I am missing is full screen swype.
Sent from my GT-P1000 using XDA App
ondoteam said:
It's working fine CF-Root for JME break autobacklight... and the eBook reader it's not present in the update can you upload it? Thank you!
Click to expand...
Click to collapse
It was in there, but the flash space is tight and it didn't all fit. I'm re-uploading a fixed version, grab the Upgrade file.
Flashed running great, hope to see a ext4 vesion soon!
Great job Roto. Tnx. I was thinking about the next version if it would be possible to include Shutdown.apk from ♫ Overcome v1.0.2 ♫ JMG Base ♫. That one has few more options like: reboot/recovery/download. I think they could be quite useful at least for me.
Thanks.
ondoteam said:
It's working fine CF-Root for JME break autobacklight... and the eBook reader it's not present in the update can you upload it? Thank you!
Click to expand...
Click to collapse
Upgrade went perfect from JMEv4... But as stated, no ebook reader.
Thanks again for your work Roto...
I know i keep asking, but with the RotoBackup, isnt there something you can make, or put in the marketplace? to do all that?
Regards,Killster
killster said:
Upgrade went perfect from JMEv4... But as stated, no ebook reader.
Click to expand...
Click to collapse
I re-packaged the tar file, and now the ebook app works for me. Just re-download the upgrade and reflash it and the ebook will work.
killster said:
I know i keep asking, but with the RotoBackup, isnt there something you can make, or put in the marketplace? to do all that?
Click to expand...
Click to collapse
Im trying, but unfortunately real work has to come first. This may be the last firmware I play with as now we have some other cool ones to choose from.
rotohammer said:
..... This may be the last firmware I play with as now we have some other cool ones to choose from.
Click to expand...
Click to collapse
Wow... Waiting for the other cool stuff from You, Bro.
Take Care.
KC
Anyone tried GPS?
Should be finally fixed!
At least on my Gtab I get a GPS fix in less then 5 seconds (in my room)
There are so many new roms sprouting up lately but I've been putting off flashing anyone of them.... waiting for yours to show up because you are my most trusted!! Flashed the update without any problem, and as usual.... smooth & crispy, so far so good Thanks again Roto!!!!!!
Related
Okay people, its done!
This is the procedure and firmware package for a single-step flash to DXJPA using Odin:
http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install-froyo.html
If you flash using that procedure, you should get a 'stock' DXJPA phone will all DX-series CSCs. Unfortunately, it *will* do a factory reset / wipe data.
DXJPA is the official Froyo for the Southeast Asian region: Singapore, Indonesia, Malaysia, Thailand, Vietnam, Philippines.
DXJPA is tricky because it really needs PIT 513 (it's the only ROM, as far as I know), probably because the /system partition size needs to be very big for the carrier customizations.
I've basically combined the missing parts from DXJPA with the files from the original DXJG4 and used the correct PIT.
Bro, thanks. now downloading from multiupload site. going to try flashing directly through odin1.7 with pit513 directly and will report back to see if successful or not.
btw, time to change your signature?
p/s: is it okay to use your k7 kernel on this rom?
edit: looking at the downloaded file from Richtofen, the modem.bin is missing. hmm....
edit2: after reviewing, i am using your package to flash.
No bro, you should use my download link. All the other packages have the wrong dbdata and the CSC wont work properly - unless u do the 2 step from DXJG4 to DXJPA.
Hey bro. Did you find any significant changes between this ROM compare to ADJP5 like does it work better with your kernel? Just curious.
Thanks!
danzgrace said:
Hey bro. Did you find any significant changes between this ROM compare to ADJP5 like does it work better with your kernel? Just curious.
Thanks!
Click to expand...
Click to collapse
ADJP5 is from another region. The DX series is for Southeast Asia. And yup, it works with my kernel too - all Froyo ROMs work.
hardcore said:
No bro, you should use my download link. All the other packages have the wrong dbdata and the CSC wont work properly - unless u do the 2 step from DXJG4 to DXJPA.
Click to expand...
Click to collapse
yeah, i notice a huge difference in the dbdata.rfs as well as the cache.rfs. The cache.rfs should be containing all the bloatware apps i presume.
now flashing, almost done now.
give me sometime, and i will do the batterymod if anyone is interested.
Someone needs to work on customizing this ROM so we can save more space.
hmm, seems to get stuck at bootup screen, but no black screen yet. will wait a bit longer, and get into recovery to wipe cache, do a factory reset.
edit: just booted up. haha...
need a fast server
Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can't access a file after 24 hours, contact your domain administrator.
hardcore, posted this in the other thread. posting here again:-
is it possible to convert this to cwm package (like how doc rambone does with his jpa/jpo roms) so that it can be flashed without wiping out all the data and settings?
s88 said:
need a fast server
Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can't access a file after 24 hours, contact your domain administrator.
Click to expand...
Click to collapse
Is that error from blogspot, or from Google Docs?
BTW, please let me know if you can't download the file. Google Docs should be super fast but I'm not sure if they'll block it after a while...
g00ndu said:
give me sometime, and i will do the batterymod if anyone is interested.
Click to expand...
Click to collapse
Sure I'm interested! Version D please.
hardcore said:
Sure I'm interested! Version D please.
Click to expand...
Click to collapse
Check the battery mod thread.. Wrote a new tutorial..
Downloading... Can't update my galaxy s asian version from kies.
Google Docs, i try again and is able to download now
hardcore said:
Is that error from blogspot, or from Google Docs?
BTW, please let me know if you can't download the file. Google Docs should be super fast but I'm not sure if they'll block it after a while...
Click to expand...
Click to collapse
Thanks Hardcore. Hope someone will cook a custom based on this firmware for us!
PS - I cant download either
you can use mediafire.com
epicurean said:
Thanks Hardcore. Hope someone will cook a custom based on this firmware for us!
PS - I cant download either
Click to expand...
Click to collapse
If you can't download, try again in a while.
In the meantime I will try to upload it to multiupload but that also takes a long time!
Installed!! Working fine..
hardcore said:
If you can't download, try again in a while.
In the meantime I will try to upload it to multiupload but that also takes a long time!
Click to expand...
Click to collapse
I'm going to upload to my server in a while and will post the link here after its done, won't have any limitations
P1000_JMG_JMG_JMF_JMG_XX_ITV_OXA_STRIPPED
ro.build.builddate = 2011.01.21
ro.build.fingerprint = samsung/GT-P1000/GT-P1000/GT-P1000:2.2/FROYO/XXJMG:user/release-keys
http://www.multiupload.com/KEDNOCTJ5J
FOR YOUR SAFETY, I HAVE REMOVED THE BOOTLOADERS FROM THE PACKAGE. THE PACKAGE IS OTHERWISE UNMODIFIED
Enjoy!
EDIT: bdl1969 has posted a version that includes dbdata.rfs (needed for some upgrades) here: http://forum.xda-developers.com/showpost.php?p=10944109&postcount=21
Thank you!
Thanks for sharing Chainfire....
Appreciated
CF,
This zip/tar does not have dbdata in it and it wont load...had to load dbdata and works good now.
Maybe Roto can make a nice rooted version for us...or you can do a CWM/rooted version of this...seems to run nice and smooth.
Are there any constraints regarding flashing? Should I use Repart and the integrates PIT? Missing dbdata lets me assume not to use repart.
RiverSource said:
Are there any constraints regarding flashing? Should I use Repart and the integrates PIT? Missing dbdata lets me assume not to use repart.
Click to expand...
Click to collapse
If you're coming from an earlier JM* build then you shouldn't need to repartition as the partitions will already be correct.
Screen time out on this build is messed again...they fixed it in the last build and broke it on this one again! Baaahh!
rmanaudio said:
CF,
This zip/tar does not have dbdata in it and it wont load...had to load dbdata and works good now.
Maybe Roto can make a nice rooted version for us...or you can do a CWM/rooted version of this...seems to run nice and smooth.
Click to expand...
Click to collapse
I don't do cheffing anymore since years now ... dbdata isn't included in a lot of ROMs ("upgrade" ROMs).
I post them as I get them - this has been one rare case where I removed the bootloaders, but normally I do not do any modifications. Wait for someone like rotohammer to make it into something easy.
Chainfire said:
I don't do cheffing anymore since years now ... dbdata isn't included in a lot of ROMs ("upgrade" ROMs).
I post them as I get them - this has been one rare case where I removed the bootloaders, but normally I do not do any modifications. Wait for someone like rotohammer to make it into something easy.
Click to expand...
Click to collapse
Why no cooking?
rmanaudio said:
Maybe Roto can make a nice rooted version for us...
Click to expand...
Click to collapse
I've snagged a copy and hopefully I can work on this on the long flight home tomorrow.
rotohammer said:
I've snagged a copy and hopefully I can work on this on the long flight home tomorrow.
Click to expand...
Click to collapse
On a flight home? You are a LEGEND!
Thanks very much Chainfire. The CSC is a multi version for Europe and contains CPW, DBT, ITV, KOR, XEF, XEO, XEU. Does anyone know if the hidden.rfs can be flashed with Heimdal or do we need to use Odin to be able to include hidden.rfs?
Hello roto,
what about including ext4 conversion? I've readen so much in other threads, but i would like to have your opinion about as this is a major change and you were also right about the bootloaders. Pros/cons, and if yes how to work it out with your mod firmware.
Have a nice flight!
abuser0815 said:
Hello roto,
what about including ext4 conversion? I've readen so much in other threads, but i would like to have your opinion about as this is a major change and you were also right about the bootloaders. Pros/cons, and if yes how to work it out with your mod firmware.
Have a nice flight!
Click to expand...
Click to collapse
Yeah, I think its time to go ext4, and along with that the tools to flash upgrades from your /sdcard, its time to ditch the pc.
The GPS performance is amazing in this release. Just the display timeout does not work right away after a reboot.
Arabic Support
I wish this upgrade will have Arabic support. Its so annoying that this awesome device can't connect arabic letters I am not going to upgrade till rotohammer does his magic and gives his stamp of approval
Navigation with "Checking navigation availability" [SOLVED]
Successful flash with a struggle of dbdata.rfs.
Everything is on the test, but up to now, the app Navigation is running with "Checking navigation availability" and nothing else.
Does it happened to You?
KC
PS.
GPS' working properly, Place & Map are OK
SOLVED
Un-install the MAP, then start Navigation. The map would be installed by Navigation by itself.
I miss the ebook reader app in this rom.
Ebook is inside hidden.rfs
This rom seems to have the fixed gps, too.
WOOOOOT!!!
This ROM deffo needs dbdata.rfs included. I've just re-Tar's Chainfire's package to include the dbdata.rfs from JMA. As soon as the upload is finnished I'll post a link. I've flashed it to my Tab and it's flashed fine, it just gives a few FCs on apps after update which is to be expected.
Since JMG has wifi isuues, I jumped onto JMI !
I've created this for folks who want a safe and easy to install firmware.
This firmware is for any NA, Euro or Asian GSM Tab. They don't contain and won't install protected bootloaders.
All the files are here:
http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JMI/
Note:Please backup your apps and settings with Titanium Backup from the market.
Write down ALL your current APN settings in Settings/Wireless/Mobile/Access Point Names/, the one with the green dot next to it. There is 14 settings in all.
New Feb 4, 2011 Roto-JMI-v2
Fixes:
Replace cache with that of JMG so Upgrade wont wipe apps.
Remove Eng dictionary due to FC's until a fix is found
Code:
b708f71257ce83d9bf7089fc2ff623db Roto-JMI-Full-v2.zip
66c1b8efbff6f10c8b5b3f26cf11f9d0 Roto-JMI-Upgrade-v2.zip
New Feb 3, 2011 Roto-JMI-v1
Warning: Even the upgrade with wipe your /data, so backup first!
Fixes:
Stock JMG Swype (fullscreen version FC's sorry)
Added OpenVPN
Gallery app from Overcome ROM, as stock one keeps FC'ing
Added cifs.ko
Added slow-work.ko
Added tun.ko
Ebook app already there
Added car home
Added all language locales
Added AppWidgetPicker
Added module loader script
Added perf tweaks
Full version wipes sdcard if corrupt
Code:
abaa94af8c9fb868459dac0d231dfe9e Roto-JMI-Full-v1.zip
8ab42612496640b00a661b8de80f09f6 Roto-JMI-Upgrade-v1.zip
Flash using Odin, using PDA button for any file you flash. If you need/want to flash the addons too, use the PHONE and CSC buttons, they all do the same thing.
Simple how-to guide here:
http://forum.xda-developers.com/showthread.php?t=895827
gonna try this out..thanks.
Sent from my samsung tab
Sweet. Going to try this in a bit. I didn't get a chance to perform the upgrade on JMG to see if that would solve the Wi-Fi issues. Hope JMI does!
just did a clean flash and will see how it runs! JME v4 was rocking for me prior to this.
Phone_Junkie said:
Sweet. Going to try this in a bit. I didn't get a chance to perform the upgrade on JMG to see if that would solve the Wi-Fi issues. Hope JMI does!
Click to expand...
Click to collapse
So far so good. Maybe I'm mistaken, but damn this firmware is fast! Really fast!
I had the wifi issue since I got the tab even with the stock fware... I hope it gets solved soon. It prevents some apps to do nighttime leeching of podcasts and such... Once it did it over 3g and almost ate all of my data plan. With JMG the problem seems bit worse, it happens more often... Will try JMI tomorrow, man gotta sleep when man gotta sleep
P.S. The battery life with JMG seems significantly improved over JME
voicemail notification
Just flashed the rom and yeah i feel the speed, but how to remove the voicemail notification..
second that voicemail icon, see it and cant get rid of it
also is the market app an older version? looks not soo cool when compared to JMG...
flashed it again and still have the same problem, guess have to wait for a upgrade or something....
wipe everything & made a full flash, modem switcher works as usual, seems this rom really runs faster... so far so good. thanks again, Roto!!
instechgainza said:
Just flashed the rom and yeah i feel the speed, but how to remove the voicemail notification..
Click to expand...
Click to collapse
i don't have this problem...
xpgroup said:
i don't have this problem...
Click to expand...
Click to collapse
Voicemail icon is not a big deal, im wondering where it come from and no option to get rid of it,,Yeah made a clean and full flash.
Flashed back from MoDaCo+ext to Roto-JMI-Full-v1 with no problems (flashed Roto-JMI-Full-v1.tar + P1_add_hidden.pit + Bell I9000UGJK4 radio with Odin1.7).
Rom seems very snappy so far.
Haptic buttons auto-dim and screen times out as normal.
Just flashed this firmware and indeed it's fast. however is it normal no PDA and CSC when u pressed? *#1234#?
Thanks Roto!
blitzkriegh said:
Just flashed this firmware and indeed it's fast. however is it normal no PDA and CSC when u pressed? *#1234#?
Thanks Roto!
Click to expand...
Click to collapse
Yup, that's normal. It doesn't actually do any harm, so just forget about it
This is a great firmware, and yes, it's pretty damn fast. But all the firmwares seem fast once they're freshly installed... so I'll wait a couple of days and then see. That's the true test!
Anyway, I have a question for all you Tab'ers out there;
Have you noticed that while you're watching a video, the button backlights NEVER turn off?
If this is true and the bug belongs to the firmware (and not the fool using it) then is there some way to correct it? It's quite distracting when I'm watching a fine comedy in bed, trying to fall asleep, with these bright, white icons burning my eyeballs out
Thanks to Roto, by the way, for this REALLY fast package. My hero.
How do you check asian tab,euro tab? I have australian tab, how do I cheeck my tab belong to??
Sorry I'm noob Whare Pit file??
jeebspawnshop said:
This is a great firmware, and yes, it's pretty damn fast. But all the firmwares seem fast once they're freshly installed... so I'll wait a couple of days and then see. That's the true test!
Click to expand...
Click to collapse
+1 for that, you are 100% right !!!
fixzigma said:
Sorry I'm noob Whare Pit file??
Click to expand...
Click to collapse
http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/
masbego said:
How do you check asian tab,euro tab? I have australian tab, how do I cheeck my tab belong to??
Click to expand...
Click to collapse
aussie tabs are euro tabs i believe
Hello, I've tried to download the LibSwypeCore.so and put in system/lib folder to get pt-br language into my phone, but it just wont recognize any library, neither potuguese nor english... How can i get PT-BR in my swype??
Thanks a lot
I'm running Darky's 9.3b3 and ever since I jumped on the Darky bandwagon, I've had to flash a separate Swype package everytime I wanted to upgrade the ROM to a newer version.
You might be able to find the language you're looking for following this link: http://forum.xda-developers.com/showpost.php?p=10208534&postcount=14303
You'll need Darky's ROM installed and a custom recovery to do this.
Slugbug said:
I'm running Darky's 9.3b3 and ever since I jumped on the Darky bandwagon, I've had to flash a separate Swype package everytime I wanted to upgrade the ROM to a newer version.
You might be able to find the language you're looking for following this link: http://forum.xda-developers.com/showpost.php?p=10208534&postcount=14303
You'll need a custom recovery to do this.
Click to expand...
Click to collapse
Yeah and are you sure this will work for him without a rom from Darky? Just having a custom recovery is enough?
Since :
Darkyy said:
Swype Packages for Darky's ROM...I'll post several Swype Packages here for use with my ROM.
Click to expand...
Click to collapse
and I even tried it on my STOCK rom, and after it swype was NOT there
If I didnt do backup before I would end up now without swype now. But then again I might have done something wrong
Actually i DO have darky 9.3
I'll give it a shot when i get home...
plinho_v said:
Actually i DO have darky 9.3
I'll give it a shot when i get home...
Click to expand...
Click to collapse
lol , how did he KNOW that?! Seriously... you are two secret friends and teamed up on me...
well good for you. (wont help me much though, I hoped his solution would work for me )
PAGOT said:
lol , how did he KNOW that?! Seriously... you are two secret friends and teamed up on me...
well good for you. (wont help me much though, I hoped his solution would work for me )
Click to expand...
Click to collapse
Ouch, my bad. I'll edit my post to make sure others don't fall into the same trap.
Since I can't post in the developer section yet i'm asking here, hope it's ok. Been looking at the ROM for a few mins and it looks great, but i've been using MIUI for so long my flashing skills are kind of rusty.
First of all, the kernel is included in the ROM and is the one the developer recommends or have developed right?
And secondly, wich radio is recommended for the ROM? Could'nt find any answer to that in the first post dedicated to the ROM. Should i flash radio before or after i flash the ROM?
Again hope you don't mind me posting this stupid question here and thank you in advance for your answers.
Oh and btw does HTC Watch work with these ROMs? Living in Sweden if it matters.
googleye said:
Since I can't post in the developer section yet i'm asking here, hope it's ok. Been looking at the ROM for a few mins and it looks great, but i've been using MIUI for so long my flashing skills are kind of rusty.
First of all, the kernel is included in the ROM and is the one the developer recommends or have developed right?
And secondly, wich radio is recommended for the ROM? Could'nt find any answer to that in the first post dedicated to the ROM. Should i flash radio before or after i flash the ROM?
Again hope you don't mind me posting this stupid question here and thank you in advance for your answers.
Oh and btw does HTC Watch work with these ROMs? Living in Sweden if it matters.
Click to expand...
Click to collapse
Radio is your personal choice... just pick the one which works best for you. Flash the rom and yes the kernel is included in the rom.
---------- Post added at 10:58 PM ---------- Previous post was at 10:51 PM ----------
googleye said:
Since I can't post in the developer section yet i'm asking here, hope it's ok. Been looking at the ROM for a few mins and it looks great, but i've been using MIUI for so long my flashing skills are kind of rusty.
First of all, the kernel is included in the ROM and is the one the developer recommends or have developed right?
And secondly, wich radio is recommended for the ROM? Could'nt find any answer to that in the first post dedicated to the ROM. Should i flash radio before or after i flash the ROM?
Again hope you don't mind me posting this stupid question here and thank you in advance for your answers.
Oh and btw does HTC Watch work with these ROMs? Living in Sweden if it matters.
Click to expand...
Click to collapse
follow my signature for trouble free flash and welcome to rcmix3d 1.5... best rom out there and if the htc watch service is available in your country then yes it will work.
Transferring the ROM, Supercharger, full wipe 1.5 ext4, and the overclock thing right now, hopefully I'll have it done with the titanium backed up apps installed as well. Your signature actually helped alot.
googleye said:
Transferring the ROM, Supercharger, full wipe 1.5 ext4, and the overclock thing right now, hopefully I'll have it done with the titanium backed up apps installed as well. Your signature actually helped alot.
Click to expand...
Click to collapse
you are welcome just remember while using titanium backup DO NOT restore system apps and ONLY restore user apps without data.. even better if you have not started already just make a folder in the root of your sdcard\RCTeam\app.user and copy all your user apps from data\app folder to sdcard\RCTeam\app.user and let the rom install your apps automatically.
Restoring data was the reason i bought titanium backup
I'll just restore the apps i had then with market links. The ROM is really fast btw, the eyecandy isn't too bad either.
googleye said:
Restoring data was the reason i bought titanium backup
I'll just restore the apps i had then with market links. The ROM is really fast btw, the eyecandy isn't too bad either.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=18238757&postcount=5008
check out that post, and maybe try the zip i attached to it. really improves battery life and performance
I have a serious issue with fkin Wavesecure, whenever I open the app to enter my info and start using it the phone freezes and nothing responds so I have to pull out the battery and start over, after wich it happends again.
Anyone else using Wavesecure with RCMix?
googleye said:
I have a serious issue with fkin Wavesecure, whenever I open the app to enter my info and start using it the phone freezes and nothing responds so I have to pull out the battery and start over, after wich it happends again.
Anyone else using Wavesecure with RCMix?
Click to expand...
Click to collapse
don't use any sort of the anti virus or security apps. you could post in the support thread and see if any one is using wavesecure app who could help you. the support thread is here....
http://forum.xda-developers.com/showthread.php?t=1071455
Actually it seems that the script killersloth linked is the problem as the phone froze again before i even entered my SIM Pin, I'll just flash the restore thing before it freezes the next time.
And Wavesecure is actually really good, I can lock and locate and wipe the phone with simple text messages, though I never use any kind of AV apps.
googleye said:
Actually it seems that the script killersloth linked is the problem as the phone froze again before i even entered my SIM Pin, I'll just flash the restore thing before it freezes the next time.
And Wavesecure is actually really good, I can lock and locate and wipe the phone with simple text messages, though I never use any kind of AV apps.
Click to expand...
Click to collapse
I would just go with a standard Rom flash set it up as my liking then do a nand backup only then I will start playing with oc\uv and fine tuning the rom to my liking... it has saved me a lot of problems faced by many users. just my way of doing things. after every success mod I do a nand backup incase my next mod messes up something I have a backup to come back to saves a lot of time and hassle. IMHO I can't say any thing about killersloth's script coz I have not used it.
NAND backups takes ages xD
However the phone is working as it should now, all thats left is a nice theme, anyone?
I won't be playing around with voltages and speeds on the CPU, default is just fine.
googleye said:
NAND backups takes ages xD
However the phone is working as it should now, all thats left is a nice theme, anyone?
I won't be playing around with voltages and speeds on the CPU, default is just fine.
Click to expand...
Click to collapse
theme is just personal thing. go for the OPB theme 1.51, At the moment I have OPB runny blue 1.50 and I am happy about it.
http://forum.xda-developers.com/showthread.php?t=1265225
A bit too round and smooth for me, is there a topic with theme collections?
Went with this one:
http://forum.xda-developers.com/showthread.php?t=1286427
I have just downloaded this and after nand backup now checking it. It'd giving me weather clock fc. You might be luckier than me
Sent from my HTC Desire HD using XDA Premium App
Nope getting it aswell, I'll try the one you are using.
I can't log in to Facebook using friend stream when I want to put on my lockscreen, just says wrong username or password although I know it's not.
Can I use any of the ROMs listed in the OUT kitchen or do I have to upload my own files as the ones for this specific ROM aren't available.
googleye said:
Nope getting it aswell, I'll try the one you are using.
I can't log in to Facebook using friend stream when I want to put on my lockscreen, just says wrong username or password although I know it's not.
Can I use any of the ROMs listed in the OUT kitchen or do I have to upload my own files as the ones for this specific ROM aren't available.
Click to expand...
Click to collapse
your best bet is to upload the files from your phone or the downloaded rom, in the uot kitchen.. the fc problem in the glass theme is a known issue you overcome it by disabling the sound effects in the weather app
OK, thanks for the fc fix.
Only thing bothering me with the theme is the transparency in the status bar, replacing it and the battery, + a new font. Then I'm happy until I find something fancier
googleye said:
OK, thanks for the fc fix.
Only thing bothering me with the theme is the transparency in the status bar, replacing it and the battery, + a new font. Then I'm happy until I find something fancier
Click to expand...
Click to collapse
give it a try in uot kitchen you never know I and many more users will be installing your theme soon
Well the file uploads been sitting on pending for a while now, and the statusbar preview didn't work so I have no idea how it will turn out, we'll see soon