Hello everyone,
i recently got a LG G Pag 10.1 and picked up a otg cable for it, it reads flash drives just fine. i also picked up a inateck hbu3vl3-4 (a 3 port usb 3 hub and gigabit ethernet port) the tablet will not read any of the usb ports or even use the gigabit network. do any of you folks have any ideas on how to get this device to work?
(the same otg cable/hub works on my s4, though the ethernet port does not work on it either)
any help would be great,
Wizeone
I have an old USB-Ethernet adapter. It works with an OTG cable to provide me a wired internet connection. Unlike your device, my adapter is neither an USB hub nor gigabit capable.
I was wondering, is there an USB Ethernet adapter that will work with my Galaxy Tab S 10.5?
Yes I have an Asus USB ethernet dongle and it just works. The dongle was a Transformer Prime accessory but should be pretty standard and works on PCs too without drivers
Thank you for the info. I did some more research yesterday after the post, apparently since my Tab S 10.5 with Verizon has the "Ethernet" menu option so it's ready to go. I plan on getting this: http://www.amazon.com/BobjGear-Ultr...21242176&sr=8-1&keywords=android+usb+ethernet along with the USB OTG adapter.
STS-E Adapter by LAVA for Samsung Tablets
Yes, you can use USB Ethernet Adapter that will charge in the same time your Samsung S 10.5''. It's called STS-E and it can be found at lavalink.com
The product is more pricey but at the end, it also charges your tablet so you don't have to be worry about running out of the tablet battery. Cheers
since i got tablets, i miss the possibility to charge and use usb at the same time. And so,i tried a lot of adapters. On my note 10.1 2014, i tried one, from samsung, that was specialised for the note pro 12.2, sorry,dont know the exact Type,but i bring it,promised.....
Also with my tab s2 9,7Lte (815),i try different ones,but no one work,till i try this one from samsung again......and.....it works perfectly. The TabS2 have a build in ethernet interface (settings, other connections, ethernet). I plug in a ethernet cable,work....... plug in charger.......work......then i connect my IRig UA,got power and it works.......charging not interupted, ethernet still working......and the adapter have two Usb 2.0 Ports and 1 Usb3.0 mini Port (like Note3) for charging, but also works with a micro usb 2.0.........
Thats fantastic......i be absolutely happy with the tab S2.....got root now, amazing power.....great device samsung......
The only prob is, some apps don't support ethernet for internet connections,like chrome and others. There is a tool for xposed, calles fake wifi connection, but Xposed don't work at the moment,about my Rom isn't deodexed......but soon, i think.
Or anyone got another solution for this?
Gesendet von meinem SM-T815 mit Tapatalk
The Name of the Adapter is Samsung ET-UP900 ......
I installed the app Eth0 from playstore, that let the apps think, a 3G connection is running, so, all apps, inkluded playstore are working fine now......
In my company, we have a VPN network, Remote desktop Connections and all the Admin Stuff is working fine...... You can configure the Ethernet Settings automatic, with dhcp or you can set a fixed ip adress and set the subnet and Gateway ......
I tried it with Ethernet, charging, and two USB Ports running a Audio Interface, and an USBStick on the other....perfect....
Gesendet von meinem SM-T815 mit Tapatalk
Hi
I have the Tab S1 running stock kitkat 4.4.2, My windows computer is an HP 20" tablet and it came with an hp usb to ethernet adaptor, after reading this thread i decided to give it a go, and it works great and i did not have to change any setting or install any software and i can browse the net with not problems.
So it looks like non Samsung usb to ethernet adapters can work as well.
John.
Yes, the ethernet adapter is no wonder.......more interesting is that USB and charging work also.....normaly, the usb port on Android tablet is physically so configured, that is can only charge or Power a usb device....(of course a kernel thing also).....and on the Tab S2 work all at the same time........
on Android devices should work every USB to Ethernet Adapter via OTG Cable, or you find a micro usb to ethernet......
On the note 10.1 2014 LTE, i found no adapter, that allows to charge and using usb at the same time, including the Lavalink adapter, that should.....
Gesendet von meinem SM-T815 mit Tapatalk
@john, browsing the net is no problem, but some apps,playstore also, needs to have a WiFi or 3g connection. (Try to download an app in playstore with ethernet) so you need for this apps a tool, that fake them, they have a 3g or WiFi connection. That's not a problem of the adapter, that apps aren't made to run with lan . This problem can be fixed with eth0 app.....
Gesendet von meinem SM-T815 mit Tapatalk
I made my own USB OTG cable and with an 82k resistor on pin 5 of the USB cable it charges and does OTG at the same time. Note however that it also keeps the CPU awake so you need to keep the charger connected, or put a switch/relay in series with the resistor- otherwise the battery only lasts a couple of days.
I've installed my S2 9.7 LTE as a replacement for my car's stereo and its going pretty great so far.
Are you using a (specific) USB hub for all these cables / adapters to connect to you tab 2?
one4spl said:
I made my own USB OTG cable and with an 82k resistor on pin 5 of the USB cable it charges and does OTG at the same time. Note however that it also keeps the CPU awake so you need to keep the charger connected, or put a switch/relay in series with the resistor- otherwise the battery only lasts a couple of days.
I've installed my S2 9.7 LTE as a replacement for my car's stereo and its going pretty great so far.
Click to expand...
Click to collapse
Using as my car stereo is the reason I bought this. What deck are you using. What apps to use for driving, that sorta thing. I'm kinda new to exploring the simplest way to integrate this. I have a magnetic mount so I just throw it on my dash and drive. So far so good but I know it can be better.
Sent from my Nexus 6P using XDA-Developers mobile app
There is also adapter called STS-2UE. It's a hub that has 2 x USB ports, Ethernet connection, and it charges the tablet and peripherals in the same time while accessing ethernet and USBs data. It cost around $90 or $100 bucks. On their website lavalink.com you can find a list of supported Samsung tablets. They are a Silver Samsung Partner, plus using this board won't wave your warranty because it doesn't require rooting the tablet. Cheers
Palima said:
There is also adapter called STS-2UE. It's a hub that has 2 x USB ports, Ethernet connection, and it charges the tablet and peripherals in the same time while accessing ethernet and USBs data. It cost around $90 or $100 bucks. On their website lavalink.com you can find a list of supported Samsung tablets. They are a Silver Samsung Partner, plus using this board won't wave your warranty because it doesn't require rooting the tablet. Cheers
Click to expand...
Click to collapse
Looking around in Aliexpress and haven't found any so far. There seems to be either one or other, charge or otg. Any keywords or any that could be bought in 2019 at Amazon or Aliexpress? Literally I want charging and Internet thru rj45 at the same time to flow to the same micro-usb cable that connects to tablet.
Charging and Ethernet at same time
Hi,
Take a look here for these product > https://lavasimulcharge.com/shop/page/1/
It's very expensive... i think.
Best Regards
Hello
I have a P5210 Tab 3 10.1"
I was wondering if my tablet works with the USB network adapters and which ones?
If it can could I use it to connect to a network and use the phone wifi to connect to another at the same time?
I've used a firestick (I believe it's a FS2) for a long time and love it. But my home wlan bandwidth has become congested making it difficult to watch streaming movies without some annoying stuttering.
Is there a way to connect an Ethernet cable directly to the firestick to speed data to it? I looked at my firestick and there seems to be no Ethernet port I could connect a cable to. Is there a trick I could use so it doesn't have to depend on a wireless connection?
maybeme2 said:
I've used a firestick (I believe it's a FS2) for a long time and love it. But my home wlan bandwidth has become congested making it difficult to watch streaming movies without some annoying stuttering.
Is there a way to connect an Ethernet cable directly to the firestick to speed data to it? I looked at my firestick and there seems to be no Ethernet port I could connect a cable to. Is there a trick I could use so it doesn't have to depend on a wireless connection?
Click to expand...
Click to collapse
The official Amazon Ethernet Adapter work fine with a 2nd generation stick.
I use a wii usb adapter I got at gamestop for 1.99, works with everything but you will need a charging OTG adapter (unless the amazon one has it integrated)
Thank you both. I'll explore the suggested options.
Take advantage of the speed and reliability of wired internet. Easy to set up – simply connect the Amazon Ethernet Adapter into the USB port on your Fire TV and plug in an Ethernet cable directly from your router.
[/COLOR]
maanvi02 said:
Take advantage of the speed and reliability of wired internet. Easy to set up – simply connect the Amazon Ethernet Adapter into the USB port on your Fire TV and plug in an Ethernet cable directly from your router.
Click to expand...
Click to collapse
Please don't revive a dead thread just to increase your post count. Also, you just repeated the obvious answer.