Develop Bugs

[Q] Need some help with connectivity issues

Hi I recently bought the Samsung Galaxy S3 MHL/HDMI Adapter so that I can mirror my Galaxy Note II to TV.
HTML:
http://www.clove.co.uk/samsung-galaxy-s3-mhlhdmi-adaptor
Basically what I'm trying to do is to be able to connect simultaneously this adapter with my external HDD 500Gb.
HTML:
http://www.amazon.co.uk/Intenso-6021530-500GB-External-Drive/dp/B0056ZOLXQ/ref=sr_1_1?ie=UTF8&qid=1358358015&sr=8-1
That way I will be able to carry all my movies in the HDD and being able to play it through my mobile at TV.
Now when I connect the drive alone(non externally powered) to the mobile through USB OTG cable everything works fine.
That's the case when I connect the MHL adapter alone in the mobile. It works great.
My problem is when I try to connect BOTH the HDD and the adapter together. That way I can open my mobile navigate to my HDD and open the video file and play it at any given HDTV. But I can't find the right configuration to make it work. Now the first thing that comes into mind is a USB hub. I try to use this one I own with 3 slots I have but with no luck.
Code:
http://www.tomatoflash.com/products/product_detail.php?Cate=products&label=15&dSN=16&tSN=85&mSN=45#03
What I do is the following. I connect the HDD directly to the hub through usb. I use a usb to usb cable to power the hub. And on the third usb slot of the hub I power the MHL adapter. To the mobile goes the micro usb male cable of the MHL adapter.
Now what happens is that the MHL adapter as expected works fine, but the HDD, while it seems to power (green light on the HDD) cannot be recognized from the mobile.
I believe this happens for either 2 reasons.
First : There's no way the mobile can see the HDD through the hub this way (could an externally powered usb hub help I wonder??)
Second : I need to have a dual micro usb female to micro usb male cable (which doesn't exist??), so that I can directly connect both the HDD and the MHL adapter on the phone.
Below is a photo of the connectivity if it helps
HTML:
http://i50.tinypic.com/2myw2rl.jpg
So what do you think I'm doing wrong or what do you suggest in terms of connectivity?
Thanks in advance for your help and ask anything to clarify if I made things complicated
I'm sorry but I cannot post links because of my limited number of posts thus the "html"

USB C and ethernet

Hi all,
Has anyone tried a USB C to Ethernet converter... I tried one today but seems as if Android won't see it as a connected device or get an IP address...
Has anyone tried this before I go down a road that leads no where...
Thanks

Tried a Windows contiuum Dock once, but that was not connected to the Ethernet

I am facing the same problem.
I tried the official cable, usb type c to usb type A, it doesn't work. Then I bought a usb type c to usb type c cable, neither...

What about installing a custom kernel that supports usb to ethernet over otg?

It should work with some devices, but not sure about any HTC.
Both LG V20 and Samsung Galaxy S8/S8+ support OTG USB to ethernet adapters. See more here:
[TIP] LG V20 H990ds supports OTG USB to Ethernet adapter
(OTG) List of USB to ethernet RJ45 adapters that work with Nexus devices

HTC One M9 OTG USB to ethernet adapter with stock ROM?

I want to connect the HTC One M9 to RJ45 ethernet, using some micro-usb to ethernet adapter via OTG. Android supports it starting from marshmallow, but no idea if the feature is present on the One M9, I think it depends on the kernel.
Anyone knows if it's possible or got it working?

Forget this phone, LG V20 and Samsung Galaxy S8/S8+ support OTG USB to ethernet adapters. See more here:
[TIP] LG V20 H990ds supports OTG USB to Ethernet adapter
(OTG) List of USB to ethernet RJ45 adapters that work with Nexus devices

One Plus 3T OTG and Micro USB to type C adaptors/ Oneplus3t OTG capabilities

I had some initial difficulty getting a micro usb OTG cable working, I ended up testing a few and thought I would share in case it saves anyone else some time or money.
if anyone else has adapters they've tried feel free to list them
I actually haven't tried a straight USB type C OTG cable yet, all have been micro USB OTG units with a micro USB to type C converter since I already had so many lying around.
First off I should mention not all micro usb to USB type C converters support OTG.
this Meenova one does and works with the oneplus 3t: https://www.amazon.com/gp/product/B018G6IK7E/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
with that converter pretty much any OTG adapter will work.
Charging also works.
This micro USB OTG adaptor is nice because its so low profile.
I tested it with a flash drive and it works fine with the Meenova adapter listed above.
https://www.amazon.com/gp/product/B0196FG4DG/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
This Samsung adapter also works well with the Meenova adapter, it has quite a few features which I tested on the Oneplus 3t, its expensive though so unless you have a Samsung tablet as well its not likely to be worth it for most people:
built in features:
two USB ports
Ethernet port
Charging port for simultaneous charging and OTG
On the Oneplus 3t both charging and OTG work fine but not at the same time.
whichever you plug in first is what it will use until you unplug and re-plug in the adapter.
That being said my understanding is that this is likely just a kernel limitation, it was the same way on the nexus 7 and a custom kernel enabled the simultaneous charging.
I'm not sure how useful that would be on a phone but I thought I would mention it.
Both USB ports work simultaneously, I connected two flash drives and both were picked up by the phone right away.
I wasn't able to get the Ethernet port working, or at least there was no indicator that it was working (My samsung tablet gives a notification that the Ethernet is plugged in but Samsung may have added that, I'm not sure) I'll play with it some more later.
Adaptor link: https://www.amazon.com/gp/product/B00J2N0GB4/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
and lastly I tried this micro USB to type c adapter and charging works but OTG does not:
https://www.amazon.com/gp/product/B0191FRCAA/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Thanks for your post about OTG adapters. Do you have any updates on this issue? I'm looking for possible adapters but cannot find any.
The Meenova adapter is not available in Europe and also seems not to be available from Amazon.com anymore. I can also disadvise from Anker USB adapter because it doesn't work.
What I'm looking for is an USB typ-C to microUSB adapter for audio output via USB.

Anker adapter supports dash charge (works with oppo vooc power bank). I am trying OTG now, but I have some cheap OTG dongle (https://www.aliexpress.com/item/5pc...G-adapter-for-HTC-for-Samsung/1734417126.html) and I am not sure if it works at all Anyway OTG via Anker is not working for me at this moment.

mmmm1234 said:
Thanks for your post about OTG adapters. Do you have any updates on this issue? I'm looking for possible adapters but cannot find any.
The Meenova adapter is not available in Europe and also seems not to be available from Amazon.com anymore. I can also disadvise from Anker USB adapter because it doesn't work.
What I'm looking for is an USB typ-C to microUSB adapter for audio output via USB.
Click to expand...
Click to collapse
i have this one
http://www.ebay.co.uk/itm/381793306261
Black / For One Plus Two 2 3 (that's what it says in the drop down)
my Fiio E10k headphone amplifier works with it if that's what you're looking for

reubenbubu said:
i have this one
Black / For One Plus Two 2 3 (that's what it says in the drop down)
my Fiio E10k headphone amplifier works with it if that's what you're looking for
Click to expand...
Click to collapse
Thanks! Though it's USB type B. I need micro USB.

OTG and power negotiation for peripherals.

Nexus 5x 7.1.1 rooted.
OTG works when mounting a flash drive, using a USB-C -> female USB A adapter.
If I plug in a USB LTE dongle, it doesn't power on. I've tried the above adapter, and a standard micro-USB OTG cable connected to a micro-USB -> USB-C adapter, without success. The dongle works with an OTG cable on a Galaxy S4, and on computers.
USB-C can manage OTG via negotiation between the phone and peripheral; it doesn't rely on the ID pin to be shorted. I'm guessing the dongle doesn't have the software to talk to USB-C devices.
Has anyone else had issues with peripherals (not flash cards) connecting via OTG?
For reference, the dongle is a Huawei 397u-53 4G LTE adapter.