Related
Any news on Brodit holders for the Galaxy S2?
Can't seem to find anything on DSL Developments (who I normally use). Timescales? or are we still looking at weeks yet. Might have to find a temporary alternative in the short term.
Why not email [email protected]? They are usually very helpful.
AndyM said:
Any news on Brodit holders for the Galaxy S2?
Click to expand...
Click to collapse
I'm using the passive HTC HD2 cradle. It's fits perfect at the bottom but a little bit of movement at the top where the phone is thinner. It's not loose enough it rattles or moves when you touch the screen. Volume and power buttons aren't blocked.
Might be easier and cheaper to find a used or new HD2 holder.
There may even be enough space to add a very thin skin, which is what I'll add if I can find a nice one.
Thanks will look into it.
Mujja said:
I'm using the passive HTC HD2 cradle. It's fits perfect at the bottom but a little bit of movement at the top where the phone is thinner. It's not loose enough it rattles or moves when you touch the screen. Volume and power buttons aren't blocked.
Might be easier and cheaper to find a used or new HD2 holder.
There may even be enough space to add a very thin skin, which is what I'll add if I can find a nice one.
Click to expand...
Click to collapse
Great to know, I currently have a HD2 with Brodit passive holder, and will receive my Galaxy S II tomorrow
I'll see if it's the same for me too...
I have an adjustable iPhone 3GS passive Brodit mount (it expands to use with gel type cases). I have a cheapo gel case on my SGII and it works fine, solid as a rock.
turt said:
Great to know, I currently have a HD2 with Brodit passive holder, and will receive my Galaxy S II tomorrow
I'll see if it's the same for me too...
Click to expand...
Click to collapse
Okay so here's what I've done: on each side of my passive holder, I've put a few centimeters of black adhesive tape. It's the kind of heavy one, which you can buy in a hardware store...
Now the Galaxy S 2 is completely stable in a HD2 Brodit passive holder!
travisb said:
I have an adjustable iPhone 3GS passive Brodit mount
Click to expand...
Click to collapse
I gave mine to a friend for free when I sold my first 3GS. Later when I bought another 3GS I tried to get it back. I think i'm going to have to ask again now
turt said:
Okay so here's what I've done: on each side of my passive holder, I've put a few centimeters of black adhesive tape. It's the kind of heavy one, which you can buy in a hardware store...
Now the Galaxy S 2 is completely stable in a HD2 Brodit passive holder!
Click to expand...
Click to collapse
Nice tip there. However, I might pick up one the offical cases from P4U this week. It looks like there may be enough room for the phone to fit the holder with the case on.
http://www.brodit.com/productinformation.jsp?anr=513255&sortiment=null
Dashers said:
http://www.brodit.com/productinformation.jsp?anr=513255&sortiment=null
Click to expand...
Click to collapse
good news - thanks for posting the update ...
Just orderEd mine from pda hut.
They claim to have stock!
Sent from my GT-I9100 using XDA App
jscsltd said:
Just orderEd mine from pda hut.
They claim to have stock!
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
do you have a link ? i can't see anything about the SGS2 on the site ?
Seems dodgy, couldn't find anything on pdahut...
Maybe he's been mistaken with the original "Galaxy S"?
I've pre-ordered from dsldevelopments as usual, claims to be in stock in 10 days or so...
Sorry, it was:
http://www.holdersandmounts.co.uk/
They must be a subsidiary of pda hut.
Product code is: 512255
Hope this helps.
Sent from my GT-I9100 using XDA App
Okay thanks for the information. However it's not in stock, it says:
"Please note: This product is expected to be in stock in the UK week commencing 30th May and is available on Pre-order basis. Demand will be very high, order yours today to secure this item."
So it is in line with what dsldevelopments have told me
Looks like I didn't spot that. Oh well, I won't hold my breath then.
Cheers.
Sent from my GT-I9100 using XDA App
Just to let you know, on Friday dsldevelopments has shipped my brodit passive holder, I should get it this week
I installed my Brodit SII-holder last Saturday. Fits perfectly. I had it pre-ordered to be one of the first to have it
I have the passive one, I use separate wires for power-in and audio-out.
I have decided to use it with a Kuda console, because that looks better in my car.
Now all I need to do is fill my SD-card with audio and I can enjoy my car-rides even better
andrek64 said:
I installed my Brodit SII-holder last Saturday. Fits perfectly. I had it pre-ordered to be one of the first to have it
I have the passive one, I use separate wires for power-in and audio-out.
I have decided to use it with a Kuda console, because that looks better in my car.
Now all I need to do is fill my SD-card with audio and I can enjoy my car-rides even better
Click to expand...
Click to collapse
Could you post some pictures of this setup please?
Thanks.
Got a TPU case on my phone and love it. Is there a desktop charger other than the seidio one that could fit it?
Just use a USB cord with a case with a prop, works great
Sent from my Galaxy Nexus using xda premium
neederishelp said:
Just use a USB cord with a case with a prop, works great
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
what exactly do you mean ??
maybe you have a link or some guide..
Thanks in advance
get one that is made for the galaxy note.
kms108 said:
get one that is made for the galaxy note.
Click to expand...
Click to collapse
do you have a link?
neederishelp said:
Just use a USB cord with a case with a prop, works great
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
i know i can do something crappy like this but was looking for something possibly that would look nice. I did come across this and may see if I can have a friend help me with this as its way out of my league.
http://yanminhong.blogspot.com/2012/01/galaxy-nexus-dock-mod.html
kms108 said:
get one that is made for the galaxy note.
Click to expand...
Click to collapse
Do you know for sure it would work?
Sent from my Galaxy Nexus using xda premium
I got a few of these: http://www.ebay.com/itm/SAMSUNG-GALAXY-S2-S-II-I9100-ZENIS-DESKTOP-DOCK-CHARGER-CRADLE-/220883609072?_trksid=p4340.m185&_trkparms=algo%3DSIC.NPJS%26its%3DI%252BC%26itu%3DUA%26otn%3D5%26pmod%3D270865448058%26ps%3D63%26clkid%3D5859734319996833550
and they have worked with all my Samsung Android phones WITH "thinner" type cases. When I put the Diztronics case on the GNex it didn't fit by a hair so I took a Dremel tool and ground down the front edge just a little. It looks a LOT worse in the picture (since it is close up and due to the lighting) then it does on my desk but it could also be done a lot neater. I kind of slipped with the Dremel. For the price, these docks can't be beat. They only make them in 1 size yet they advertise them as if they are different (and jack up the prices depending on the phone). There is NO audio or video out, it's simply a charge/sync/nightstand cradle.
Today I broke down and ordered the "RND Power Solutions Deluxe 2nd Battery Charger and Data Sync Cradle" from amazon.com (too new to post a link, just give it a search).
This may be what you are looking for, because it is described as having an insert you can put in/remove depending on the case you are using.
I should have this guy in-hand Friday and I can give you a more detailed review.
wookaru said:
Today I broke down and ordered the "RND Power Solutions Deluxe 2nd Battery Charger and Data Sync Cradle" from amazon.com (too new to post a link, just give it a search).
This may be what you are looking for, because it is described as having an insert you can put in/remove depending on the case you are using.
I should have this guy in-hand Friday and I can give you a more detailed review.
Click to expand...
Click to collapse
Looking forward to read it
Sendt fra min Galaxy Nexus med Tapatalk
Someone just posted a review of the RND Power Solutions dock in this forum.
http://forum.xda-developers.com/showthread.php?t=1465597
Looks like his LTE phone with a thin case was a tight fit, so this may not be what you are looking for :-(
wookaru said:
Someone just posted a review of the RND Power Solutions dock in this forum.
http://forum.xda-developers.com/showthread.php?t=1465597
Looks like his LTE phone with a thin case was a tight fit, so this may not be what you are looking for :-(
Click to expand...
Click to collapse
Not sure you´r correct, since they are saying in the reviews, that the sparepart charger doesn´t fit their type of battery, but its ment for the GSM version. .
So IMO this one on Amazon is for the GSM-version, but still wil work for the LTE versions phones, but not the spare battery they may want to charge..
That looks to be the same as the KiDiGi one listed on the Mobi site except the Amazon price is a lot less expensive. However on the Mobi site it is listed as a GSM (i9250) version.
I've been tempted as they also have a car dock with the same form factor but I'm really looking for something that looks decent but allows me to leave my Qmadix case on the phone.
tgmorris said:
That looks to be the same as the KiDiGi one listed on the Mobi site except the Amazon price is a lot less expensive. However on the Mobi site it is listed as a GSM (i9250) version.
I've been tempted as they also have a car dock with the same form factor but I'm really looking for something that looks decent but allows me to leave my Qmadix case on the phone.
Click to expand...
Click to collapse
it's the same thing.
kms108 said:
it's the same thing.
Click to expand...
Click to collapse
Has any of you bought from 4u-mobi??
Galaxy Nexus-Tapatalk
I finally got the charging dock from 4u-mobi and can confirm that the GSM model with a casemate barely there case will fit..
I also got a s-curve TPU case, that fit this dock as well....
In both combinations you need to take off the insert
what about the clingo desktop stand. i;ve been looking at getting a universal desktop dock so that i can use it with a case and future phones.
neotekz said:
what about the clingo desktop stand. i;ve been looking at getting a universal desktop dock so that i can use it with a case and future phones.
Click to expand...
Click to collapse
I just ended up getting the gogostand and taping it to my desk. Works flawless. Yes it doesnt charge, but I couldnt find anything that I liked without having to remove my case each time. And I wasnt going to do that.
KIDIGI Desktop Cradle/Charging Station[FULL REVIEW] >>>.LOTS OF PICS<<<
FULL REVIEW
This is the KIDIGI Desktop Cradle/ Charging Station customed designed to fit the HTC ONE X both WITH and WITHOUT CASES on.
The following are pictures showing the dock dimentions, shipping package (review unit), usb cable (Samsung?), and how the dock fits with and without a case on
REVIEW
Look and Feel
After constantly using the dock for the past few days, I must admit this: this dock looks amazing. Its form and design flows with the shape of the One X, and its borders are not restricting, but also curves to create round edges that really adds on to the look of this dock. Its construction is 100% plastic, but there is a little premium feel to it with its glossy lip and matte sides. Though I do not understand fully as to why there is a back piece jutting out so much, it does indeed provide the support for when the phone is placed on top.
Usability:
Advertised as the case fit version, it came with a plastic piece of adapter to be used when your phone is naked. The fit when case-less is perfect, with the polycarbonate body of the HOX just reaching the point where it would touch the plastic stand.
I was, however, very delighted to see that when the plastic adapter was taken off, the KIDIGI dock adapted all cases that I had, which was an OTTERBOX DEFENDER, and a Nillkin TPU case. The Otterbox when fitted, provided a very tight fit against the sides of the dock, where as the Nillkin left a little space, though both fit the dock perfectly. Thus, it is safe to say that any sort of case you have, would definitely fit on this dock.
It was a breeze to just dock my phone, and charge it, or simply to transfer data to my laptop. Though dock mode won’t activate by itself, this can be easily solved by using dock simulator from the play store.
Cons:
There was only one little thing that I didn’t quite like about this dock. When the phone was docked, it was quite wobbly. Yes, I know that the only link between the phone and the dock is the connector, but extra space around the front and back were a bit excessively left, and this happens both with a case and without.
Would I recommend it?
Yes, for the price and the amount of use it offers, I would definitely recommend this to any who is looking for a great looking, adaptable dock.
Feel free to ask any questions about the dock
This does look good.....
I have the HDMI Version works great!
send from my One X
magic_moe_ said:
I have the HDMI Version works great!
send from my One X
Click to expand...
Click to collapse
THAT is a good thing to hear. Have you tried watching movies while charging through that? Does the phone heat up? Also, how long does it take to charge through the dock?
So all it is, is a bit of plastic to prop it up, while allowing it to charge via usb?
Is there anything that uses the gold connectors?
UK Seller
I found a UK seller Here:
http://www.ebay.co.uk/itm/Kidigi-Deluxe-Cover-Mate-USB-Desktop-Charger-Charging-Cradle-HTC-One-X-/140763173346?pt=UK_MobilePhones_MobilePhoneAccessories_MobilePhoneChargers&hash=item20c62391e2#ht_3846wt_1163
patriotaus said:
So all it is, is a bit of plastic to prop it up, while allowing it to charge via usb?
Is there anything that uses the gold connectors?
Click to expand...
Click to collapse
nothing just yet. wait for the official htc one. BTW, those pin connector are loose, and ur phone can be easily knocked off.. Since you are only placing the phone on the small connectors.
Kevin Ma said:
THAT is a good thing to hear. Have you tried watching movies while charging through that? Does the phone heat up? Also, how long does it take to charge through the dock?
Click to expand...
Click to collapse
Of course, works perfect. Playing Games too, everything for that matter.
Well, while playing heavy games it does heat up, but thats normal.
Didn't stop time from 0% to 100%, but I think it's the same with like any AC charger out there...
patriotaus said:
So all it is, is a bit of plastic to prop it up, while allowing it to charge via usb?
Is there anything that uses the gold connectors?
Click to expand...
Click to collapse
What do you need gold connectors for? You realize these are all digital connections right? 0's And 1's will still be 0's and 1's, even through a gold connector.
What you will have to consider is that the HDMI-cradle does not fastcharge your device, regardless what mod you make to your charger/cable. It disconnects the shortened data pins in the MHL/HDMI-path again, and only does USB-charging.
Furthermore no regular USB-connection is possible to your PC.
Expansys shipped the HDMI-version though I ordered the USB one. Been thinking about swapping it, because I need to fastcharge.
Re "gold connectors"... I think he means the pogo pins.
Sent from my HTC One X using XDA
magic_moe_ said:
I have the HDMI Version works great!
send from my One X
Click to expand...
Click to collapse
Does it activate Dock Mode?
A Photo Review of my KiDiGi dock.
http://forum.xda-developers.com/showthread.php?t=1699314
junialum said:
A Photo Review of my KiDiGi dock.
http://forum.xda-developers.com/showthread.php?t=1699314
Click to expand...
Click to collapse
Saw that, Great review. I have yet to receive my test unit, but i will try and take more pictures along with a video.
Picked one of these up and I'm pretty pleased with it, especially as I can use it while my rock case is on the puone...
Sent from my HTC One X using xda premium
chrishull85 said:
Picked one of these up and I'm pretty pleased with it, especially as I can use it while my rock case is on the puone...
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
what about any clear tpu cases on the phone？ do they still fit？
Sent from my HTC One X using Tapatalk
REVIEW UNIT DOCK ARRIVED TODAY, WILL UPDATE OP WITH FULL REVIEW AND PICS AFTER MORNING EXAMS
Sent from my HTC One X using Tapatalk 2
Kevin Ma said:
REVIEW IS NOW IN PROGRESS, Enjoy the pics while I test this stuff out.
This is the KIDIGI Desktop Cradle/ Charging Station customed designed to fit the HTC ONE X both WITH and WITHOUT CASES on.
The following are pictures showing the dock dimentions, shipping package (review unit), usb cable (Samsung?), and how the dock fits with and without a case on
Click to expand...
Click to collapse
Where did u get it from..i have been looking to get one myself..but couldnt find a good price..coz i'm located in the U.K...thanks....
Sent from my HTC One X using Tapatalk 2
magic_moe_ said:
I have the HDMI Version works great!
send from my One X
Click to expand...
Click to collapse
Where did u get it from?. Been looking to get one at a decent price?. Thanks..im located in UK..can u post link ?
Sent from my HTC One X using Tapatalk 2
f4rell09 said:
Where did u get it from..i have been looking to get one myself..but couldnt find a good price..coz i'm located in the U.K...thanks....
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
if u are in the uk, on the first page of this threas, someone shared a link to a ebay uk seller for 10 . check it out
http://forum.xda-developers.com/showthread.php?p=26921607
Sent from my HTC One X using Tapatalk 2
**UPDATE 8/17/2012**
I've been working on many of your suggestions and am really enjoying hearing new ones. Please keep them coming!
I'll maintain this top post to include which projects I've finished, which I've started (and their progress) and which are in the pipeline.
Finished and posted to techneesh.com:
- Hybrid portrait//landscape dock (iExitus,
- Custom engraving (txkorm,
- Extra colors (-FuRBz-,
- Brass Knuckles Case (Se23, baghera1979,
- Bumper Case (thanks, ruvort)
In the pipeline (priority-ordered, approximately):
- Brass Knuckles 2.0 (with holes for charging/buttons, top cover for aesthetics, smaller finger holes, rounded edges)
- Dock for Otterbox Commuter Case
- Tobacco Case (not xda related, but xda member requested - will double as a microSD holder
- Bumper Case 2.0
- Dock for Hyperion Extended Battery
- Variable/adjustable dock for other cases
- Modular Dock (specs are not yet solidified. perhaps it will have a connection for an adapter to attach to your car, your bike, etc. Perhaps for preexisting docks like the iHome. Post your thoughts!) (tghockey07,
- HDMI//USB Host Dock
- Your next suggestion
Sorry if I didn't include you I got cut off bc I'm currently boarding a plane
*********************
Just upgraded from my bionic to this sweet phone & ordered the 4200 mah extended w/nfc from amazon for $19.
I made a custom car dock and docking station for the bionic- I was going to integrate HDMI & a usb hub (kind of like this ultrabook docking station) so ppl could use Motorola's Webtop Software more easily... but the # of ppl w/Bionics seems to have diminished extensively.
Anyway, I'm wondering if folks have any dreams for a sgs3 accessory that they'd like to exist.
I want the Mugen dock w/HDMI but it looks like it's out of stock until September... so I may design one myself. lmk any thoughts!
Triskite said:
Just upgraded from my bionic to this sweet phone & ordered the 4200 mah extended w/nfc from amazon for $19.
I made a custom car dock and docking station for the bionic- I was going to integrate HDMI & a usb hub (kind of like this ultrabook docking station) so ppl could use Motorola's Webtop Software more easily... but the # of ppl w/Bionics seems to have diminished extensively.
Anyway, I'm wondering if folks have any dreams for a sgs3 accessory that they'd like to exist.
I want the Mugen dock w/HDMI but it looks like it's out of stock until September... so I may design one myself. lmk any thoughts!
Click to expand...
Click to collapse
O_O man that printer is just insane. I've seen one in action and in some cases they have them in stores where you can just go an pay a certain amount for the object your printing
3D printers are amazing, and have really come down in price. I remember the first laser printers were in the $5000 and up range... ($5000 on the lower end as I recall)
And now, you can print in 3D ......... soooo cool.
So how would this work if you printed something for me? Not sure what yet, but I'm sure I could think of something that I've had in mind
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Araltd said:
3D printers are amazing, and have really come down in price. I remember the first laser printers were in the $5000 and up range... ($5000 on the lower end as I recall)
And now, you can print in 3D ......... soooo cool.
Click to expand...
Click to collapse
O_O dafuq am i the only one never heard of a 3D printer...?!
i'd like to have a cover with a 3d unishark on it!!!!!
Sent from my GT-I9300 using xda premium
Can you print a phone back?
Sent from my Samsung Galaxy S3 with XDA Premium
Awesome. One day I WILL have to buy/build a 3D printer, but they're still currently either way too expensive, or way too janky (MakerBot). And then one day a little further down the road: true desktop molecular manufacturing for everyone (nanotechnology).
In any case, here's something I'd definitely design and print for my phone if I had a 3D printer: End caps and/or snap-on housings for my right-angle 3.5mm stereo cable AND my right-angle micro USB cable. Why? Because I often have both plugged in and it's a pain to comfortably hold my phone in landscape mode while gaming with the nubs of each cable connector jamming into my hands. Would much rather have something with more surface area covering 'em. (KICKSTARTER?! $$$ )
GamerMYJ said:
Can you print a phone back?
Sent from my Samsung Galaxy S3 with XDA Premium
Click to expand...
Click to collapse
if you give him the 3d geometry file he can print it providing the overhangs are not too bad or it may have to be done in multiple parts.
A D&D Character holding a White Galaxy S III
Triskite said:
Just upgraded from my bionic to this sweet phone & ordered the 4200 mah extended w/nfc from amazon for $19.
I made a custom car dock and docking station for the bionic- I was going to integrate HDMI & a usb hub (kind of like this ultrabook docking station) so ppl could use Motorola's Webtop Software more easily... but the # of ppl w/Bionics seems to have diminished extensively.
Anyway, I'm wondering if folks have any dreams for a sgs3 accessory that they'd like to exist.
I want the Mugen dock w/HDMI but it looks like it's out of stock until September... so I may design one myself. lmk any thoughts!
Click to expand...
Click to collapse
I would love a docking station for this beast.
which 3d printer did you get? I'm pricing a few out right now as well if anyone has any pointers...
I desperately want a 3D printer. So many ideas in this thick skull. lol
You should do the inductive charging mod for your phone with the Pre back cover and fabricate a car mount for the S3 with a slot to slide a touchstone into it.
Oh yeah, I'd want one. I'm hoping for something similar when Samsung eventually gets around to releasing their official inductive charging kit unlike the Verizon only one that Big Red just released.
That's a really nice docking station for the Moto btw.
Responses for all!
baghera1979 said:
So how would this work if you printed something for me? Not sure what yet, but I'm sure I could think of something that I've had in mind
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Well if it's something that I think sounds cool I would probably just make it and send you one for free- the material isn't exactly cheap but it's definitely not expensive, either. The design time sometimes takes a while (2-10 hours), though, depending what it is. But yeah just throw down some ideas.
I'm also up to do custom orders for relatively cheap (~$20/hr design time, $3 per ounce printed). You can see some stuff I've done here, here, and here.
GamerMYJ said:
Can you print a phone back?
Sent from my Samsung Galaxy S3 with XDA Premium
Click to expand...
Click to collapse
After I hacked my bionic for wireless charging I tried designing part of a phone back (my first print + first design ever, so it looks terrible). Even now that I'm pretty good with the printer & designing things, I don't think it has quite the precision for the fine interlocking mechanism required for the phone back to snap to the phone.
Also, you can see the fine bead of the print so it doesn't look as smooth as china-factory-printed-plastic. (see photo from first post) - so it's better for docks and things like that.
zmore said:
Awesome. One day I WILL have to buy/build a 3D printer, but they're still currently either way too expensive, or way too janky (MakerBot). And then one day a little further down the road: true desktop molecular manufacturing for everyone (nanotechnology).
In any case, here's something I'd definitely design and print for my phone if I had a 3D printer: End caps and/or snap-on housings for my right-angle 3.5mm stereo cable AND my right-angle micro USB cable. Why? Because I often have both plugged in and it's a pain to comfortably hold my phone in landscape mode while gaming with the nubs of each cable connector jamming into my hands. Would much rather have something with more surface area covering 'em. (KICKSTARTER?! $$$ )
Click to expand...
Click to collapse
The makerbot replicator has worked extremely well for me! ($1700). It will do 50+ prints without an issue, and until last week the only fixes I had to do were replacing the tape on the platform and cleaning out the extruder's motor. (last week the motherboard blew, but they immediately shipped me a new one free of charge, and now I'm running again).
OK so let me get this right - you have right angle cables and you'd like something to snap onto the phone to essentially cover both cables so it is
a) more comfortable to hold in landscape
b) protects the jacks from damage
is that about right? or do you want it to snap onto the cables themselves
bdangol said:
if you give him the 3d geometry file he can print it providing the overhangs are not too bad or it may have to be done in multiple parts.
Click to expand...
Click to collapse
Yes I can print most things, even if there's an overhang (it just requires wasting plastic to print support material). Creating a design is pretty easy in Google's (actually Trimble just bought it) free program Sketchup. You can send me the file or an STL exported from any other 3d modeling software.
txkorm said:
I would love a docking station for this beast.
Click to expand...
Click to collapse
What kind of docking station? Power only? HDMI too? Landscape? Vertical? How many folks would also be interested?
Darmokk said:
which 3d printer did you get? I'm pricing a few out right now as well if anyone has any pointers...
Click to expand...
Click to collapse
I got the Makerbot Replicator for the customer support. With relatively premature technology, I think it's worth it to spend a few bucks extra to get awesome support. They answer requests on weekends and will replace any broken parts promptly & free of charge.
However, I would probably try out the Solidoodle, as it is super cheap and looks good. I do feel bad supporting the company as the founder used to work at Makerbot and literally just stole their business model.
msgnyc said:
I desperately want a 3D printer. So many ideas in this thick skull. lol
You should do the inductive charging mod for your phone with the Pre back cover and fabricate a car mount for the S3 with a slot to slide a touchstone into it.
Oh yeah, I'd want one. I'm hoping for something similar when Samsung eventually gets around to releasing their official inductive charging kit unlike the Verizon only one that Big Red just released.
That's a really nice docking station for the Moto btw.
Click to expand...
Click to collapse
Thanks man. You must have seen my other post where I hacked my phone previously for wireless charging?
Not really sure I see the value to it being wireless charging if it's gonna stay stationary in a navigation dock, though? Would it be for device flexibility (so I wouldn't have to redesign it when I get a new phone)?
I'd like a dock that accepts the phone in a case and also works in landscape
Sent from my GT-I9300 using xda app-developers app
Actually didnt know about your previous mod lol.
Was more or less just thinkin aloud (or in text i should say) about a type of of car dock Id like to see for this and future devices. Im a little tired of buying 2-3 new docks (home, car, office) everytime I get a new phone in all honesty.
Would love for a slim universal car dock with inductive charging. Cable can be pulled from the inductive charging pad/touchstone for devices that require being physically plugged in. Makes things simple. Just get in the car, put the device in the dock quickly without worrying about fumbling wires or which side is your port on etc. When you get out just grab the phone. no worrying about wires, bending the usb connector cause you pulled at a wierd angle etc. you know?
Just figured the touchstone + mod would be a nice cheap base to start with for concepting over a $100ish inductive pad. Maybe even stick a laminated rewritable nfc tag in the center with a nice logo on it to program for carmode/ nav/ music or whatever as soon as you dock it. Maybe even make the dock itself detachable and usable as a desktop dock aswell... Ok ok lemme pause my brain for a lil while. I can keep going on and on about this stuff... lol
I am a mechanical engineer and do alot of 3D work in solidworks. I can sketch things up in 3D if people have an idea.
Could the OP use solidworks or step files to automatically print these? I would really like it to design docks and stand if I know the gap margibs from this markerbot
Sent from my GT-I9300 using xda premium
htcsnap93 said:
I am a mechanical engineer and do alot of 3D work in solidworks. I can sketch things up in 3D if people have an idea.
Could the OP use solidworks or step files to automatically print these? I would really like it to design docks and stand if I know the gap margibs from this markerbot
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I have an idea for a case for the sgh-i747. Just a simple 2 piece snap together case. Nothing fancy. Would be nice to see how that material holds up to some of the others I have.
I guess any clamshell style case would work as a template if you could do that and send it it to OP. I have looked for 3d dimensions for them and can't find anything for it.
Thank you
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
baghera1979 said:
I have an idea for a case for the sgh-i747. Just a simple 2 piece snap together case. Nothing fancy. Would be nice to see how that material holds up to some of the others I have.
I guess any clamshell style case would work as a template if you could do that and send it it to OP. I have looked for 3d dimensions for them and can't find anything for it.
Thank you
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Could you post some links or pics, in private or here of what you mean with clammshell? Dimensions i will get from my own device.
Sent from my GT-I9300 using xda premium
Think you could make a stand for me? I just need one that my phone could sit horizontally, and I'd just plug it in to my MHL adapter. How much would that cost?
Sent from my Samsung Galaxy S3 with XDA Premium
Does anyone have a design for a stand that you can attach the Nexus Wireless Charger to?? I want to get one printed but have no clue how to design it myself
EDIT: Found what I'm looking for
http://www.thingiverse.com/thing:221115
**** that's amazing! Now where to print it?
Just typed in 3D printing Toronto and found a couple of local shops
Sent from my Nexus 5 using xda app-developers app
yesss this is awesome! gunna print this at my school. need to see if i can, or i can find someone to make this into a car charger as well. id imagine the magnets would work for a car charger
fergdizzle9090 said:
yesss this is awesome! gunna print this at my school. need to see if i can, or i can find someone to make this into a car charger as well. id imagine the magnets would work for a car charger
Click to expand...
Click to collapse
It took me about 3 hrs to hunt down that design because I had no clue where to look. You can always commission someone to design it for you
Nah I got the design and have access to a few different 3d printers in class. Post your results of what you get when it's done!
Tapatalk Nexus 5 Master Race
Found a guy on Reddit who has access to a printer in his lab. Working on details to get one printed! Will post back once it's all done and received.
That looks great!
I'm also curious if anyone's created a version like this for the car.
I just got my Nexus Wireless Charger recently and have been looking at different options on how to mount it to my car dashboard without doing any permanent modifications. This printed dock/stand looks like the right idea.
I got a quote for this thing this morning and they want $300 to print it because it's a solid model rather than shelled.
Something to keep in mind before you guys get your hopes up.
Might contact the creator and see if he can edit to make it hollow?
Sent from my Nexus 5 using xda app-developers app
Hey Guys,
We have a Makerbot 2X. Happy to help prototype anything you need!
I'm sure the higher up's wouldn't mind.
-Weston
Slickwraps
slickwraps said:
Hey Guys,
We have a Makerbot 2X. Happy to help prototype anything you need!
I'm sure the higher up's wouldn't mind.
-Weston
Slickwraps
Click to expand...
Click to collapse
Thanks Weston, I found a friend local who has one and I'm getting a lesson on how to use it Saturday to print my own. Once I do that, a designer friend of mine are going to sit down and refine the design to clean it up and make the stand as stable as possible
I just had one printed by a co-worker and love it. The most difficult part is getting the cable through and it cuts 6-8 inches off of the cable which is already rather short for the official nexus charger. Just keep that in mind.
slickwraps said:
Hey Guys,
We have a Makerbot 2X. Happy to help prototype anything you need!
I'm sure the higher up's wouldn't mind.
-Weston
Slickwraps
Click to expand...
Click to collapse
prototyping right now and it looks like the angle is a bit steep but I'm just doing a rough draft
ive been thinking and i think it would look better and be cheaper if i could redesign it like the guy who made his own wood charger. buy some strong magnets for the nexus 5 back and use a cheap disassembled generic qi charger. then you wouldnt have to buy the expensive nexus 5 charger
fergdizzle9090 said:
ive been thinking and i think it would look better and be cheaper if i could redesign it like the guy who made his own wood charger. buy some strong magnets for the nexus 5 back and use a cheap disassembled generic qi charger. then you wouldnt have to buy the expensive nexus 5 charger
Click to expand...
Click to collapse
Tru but I already bought the nexus charger sooooo.
UPDATE After many tries, the print has been difficult to do because of the shape of it. 4th try and counting
gwertheim said:
Tru but I already bought the nexus charger sooooo.
UPDATE After many tries, the print has been difficult to do because of the shape of it. 4th try and counting
Click to expand...
Click to collapse
Have you tried to remove the guts from the charger case?
Sent from my Nexus 5 using Tapatalk
I admire this work
Soooooo I finally got around to getting it printed through the contact I found on Reddit.
He sent me these pictures of the final product:
http://imgur.com/a/GpAA3
Looks amazing, hoping it all fits together nicely.
balla786 said:
Soooooo I finally got around to getting it printed through the contact I found on Reddit.
He sent me these pictures of the final product:
http://imgur.com/a/GpAA3
Looks amazing, hoping it all fits together nicely.
Click to expand...
Click to collapse
That Is pretty awesome :fingers-crossed: