Develop Bugs

Brodit Holder

Any news on Brodit holders for the Galaxy S2?
Can't seem to find anything on DSL Developments (who I normally use). Timescales? or are we still looking at weeks yet. Might have to find a temporary alternative in the short term.

Why not email [email protected]? They are usually very helpful.

AndyM said:
Any news on Brodit holders for the Galaxy S2?
Click to expand...
Click to collapse
I'm using the passive HTC HD2 cradle. It's fits perfect at the bottom but a little bit of movement at the top where the phone is thinner. It's not loose enough it rattles or moves when you touch the screen. Volume and power buttons aren't blocked.
Might be easier and cheaper to find a used or new HD2 holder.
There may even be enough space to add a very thin skin, which is what I'll add if I can find a nice one.

Thanks will look into it.

Mujja said:
I'm using the passive HTC HD2 cradle. It's fits perfect at the bottom but a little bit of movement at the top where the phone is thinner. It's not loose enough it rattles or moves when you touch the screen. Volume and power buttons aren't blocked.
Might be easier and cheaper to find a used or new HD2 holder.
There may even be enough space to add a very thin skin, which is what I'll add if I can find a nice one.
Click to expand...
Click to collapse
Great to know, I currently have a HD2 with Brodit passive holder, and will receive my Galaxy S II tomorrow
I'll see if it's the same for me too...

I have an adjustable iPhone 3GS passive Brodit mount (it expands to use with gel type cases). I have a cheapo gel case on my SGII and it works fine, solid as a rock.

turt said:
Great to know, I currently have a HD2 with Brodit passive holder, and will receive my Galaxy S II tomorrow
I'll see if it's the same for me too...
Click to expand...
Click to collapse
Okay so here's what I've done: on each side of my passive holder, I've put a few centimeters of black adhesive tape. It's the kind of heavy one, which you can buy in a hardware store...
Now the Galaxy S 2 is completely stable in a HD2 Brodit passive holder!

travisb said:
I have an adjustable iPhone 3GS passive Brodit mount
Click to expand...
Click to collapse
I gave mine to a friend for free when I sold my first 3GS. Later when I bought another 3GS I tried to get it back. I think i'm going to have to ask again now

turt said:
Okay so here's what I've done: on each side of my passive holder, I've put a few centimeters of black adhesive tape. It's the kind of heavy one, which you can buy in a hardware store...
Now the Galaxy S 2 is completely stable in a HD2 Brodit passive holder!
Click to expand...
Click to collapse
Nice tip there. However, I might pick up one the offical cases from P4U this week. It looks like there may be enough room for the phone to fit the holder with the case on.

http://www.brodit.com/productinformation.jsp?anr=513255&sortiment=null

Dashers said:
http://www.brodit.com/productinformation.jsp?anr=513255&sortiment=null
Click to expand...
Click to collapse
good news - thanks for posting the update ...

Just orderEd mine from pda hut.
They claim to have stock!
Sent from my GT-I9100 using XDA App

jscsltd said:
Just orderEd mine from pda hut.
They claim to have stock!
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
do you have a link ? i can't see anything about the SGS2 on the site ?

Seems dodgy, couldn't find anything on pdahut...
Maybe he's been mistaken with the original "Galaxy S"?
I've pre-ordered from dsldevelopments as usual, claims to be in stock in 10 days or so...

Sorry, it was:
http://www.holdersandmounts.co.uk/
They must be a subsidiary of pda hut.
Product code is: 512255
Hope this helps.
Sent from my GT-I9100 using XDA App

Okay thanks for the information. However it's not in stock, it says:
"Please note: This product is expected to be in stock in the UK week commencing 30th May and is available on Pre-order basis. Demand will be very high, order yours today to secure this item."
So it is in line with what dsldevelopments have told me

Looks like I didn't spot that. Oh well, I won't hold my breath then.
Cheers.
Sent from my GT-I9100 using XDA App

Just to let you know, on Friday dsldevelopments has shipped my brodit passive holder, I should get it this week

I installed my Brodit SII-holder last Saturday. Fits perfectly. I had it pre-ordered to be one of the first to have it
I have the passive one, I use separate wires for power-in and audio-out.
I have decided to use it with a Kuda console, because that looks better in my car.
Now all I need to do is fill my SD-card with audio and I can enjoy my car-rides even better

andrek64 said:
I installed my Brodit SII-holder last Saturday. Fits perfectly. I had it pre-ordered to be one of the first to have it
I have the passive one, I use separate wires for power-in and audio-out.
I have decided to use it with a Kuda console, because that looks better in my car.
Now all I need to do is fill my SD-card with audio and I can enjoy my car-rides even better
Click to expand...
Click to collapse
Could you post some pictures of this setup please?
Thanks.

ProClip Vehicle Mounts available for pre-order

http://www.proclipusa.com/default.a...d=&parent_category=4&d_pcat=13451&d_cat=18854
I like these mounts, the page just went up today. It's much better than the crap Verizon is pushing. Anyone else ever use these docks?

I can't tell from the pics but does the one that have the charger block the audio out?
Never mind, I can see the audio jack now in the pics.

i came on to post this...I just got an email from proclip confirming this. Ive used proclip in the past and they are of good quality
http://www.proclipusa.com/default.a...d=&parent_category=4&d_pcat=13451&d_cat=18854

I'm guessing only the adjustable holder will fit our phones if we have cases on them?

bowsersoulstar said:
I'm guessing only the adjustable holder will fit our phones if we have cases on them?
Click to expand...
Click to collapse
Looks like it. I would like the active setup, but I will have a TPU case on it. I wonder if a heat gun can help me bend it out a bit.

Roroco said:
Looks like it. I would like the active setup, but I will have a TPU case on it. I wonder if a heat gun can help me bend it out a bit.
Click to expand...
Click to collapse
I'm looking at the same problem here. I've been using a holder with the 2 amp charger for the past two years with my Incredible and absolutely love it. I've never been able to get an extended battery because of how tight it slides in, though. I'll email them and ask but I might have to just swap in the stock battery for rides I know I'll need the juice.
Pros of using this are great, though. Because it's 2 amp charger I would get ~25% in about 20 minutes of driving with my Incredible with fast charging enabled in the kernel. GPS and Bluetooth for Google Maps would slow the charge down but would still give me a full charge from 20% to full in an hour. With Cyanogen I would set my bluetooth to only turn on when connected to a wall charger so I'd slide this in and my buetooth would turn on and connect to my car automatically. Last but not least, your wires are all tucked away! Very clean look.

Does the mount hold the audio cable so it doesn't move and it plugs into the phone?
Any issues with the diztronic TPU case? Would it prevent the microusb or audio plugs from inserting into the phone completely?

nomisunrider said:
Does the mount hold the audio cable so it doesn't move and it plugs into the phone?
Any issues with the diztronic TPU case? Would it prevent the microusb or audio plugs from inserting into the phone completely?
Click to expand...
Click to collapse
If you get the universal dock, the bottom of the phone is completely exposed so you won't have any issues. I got my wife one of these (universal) for her iPod a few years back and the build quality is top notch.
i wish I didn't have to also plug in the cables separately, but maybe I can jerryrig something up.

Roroco said:
If you get the universal dock, the bottom of the phone is completely exposed so you won't have any issues. I got my wife one of these (universal) for her iPod a few years back and the build quality is top notch.
i wish I didn't have to also plug in the cables separately, but maybe I can jerryrig something up.
Click to expand...
Click to collapse
Yah, that's I'm trying to avoid. Taking off my case every time I get in the car would be a big hassle.

nomisunrider said:
Yah, that's I'm trying to avoid. Taking off my case every time I get in the car would be a big hassle.
Click to expand...
Click to collapse
If you don't want to remove the case, then you need to get the universal dock. I wish them made a version of the active dock that was slightly adjustable, but they don't.

My question is would the charging holder accommodate the extended battery given that it barely adds any thickness to the device. From the looks of the pictures, it looks like the device slides in and is held on to the sides only so it looks like shouldn't be a problem.
I contacted customer service and they said this:
Indeed the added battery won't make it work in 512324. Our adjustable holder listed with the Galaxy Nexus listing might work. Our custom holders are made for the device as it comes out of the box, and indeed any added thickness will make it not work in our custom holders.
Click to expand...
Click to collapse
So I guess not?

Roroco said:
If you don't want to remove the case, then you need to get the universal dock. I wish them made a version of the active dock that was slightly adjustable, but they don't.
Click to expand...
Click to collapse
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
http://www.proclipusa.com/brodit-de...and-pass-through-connector--516165-18357.aspx
I emailed them asking if they have plans for such a device for the galaxy nexus.

Mooem7 said:
My question is would the charging holder accommodate the extended battery given that it barely adds any thickness to the device. From the looks of the pictures, it looks like the device slides in and is held on to the sides only so it looks like shouldn't be a problem.
I contacted customer service and they said this:
So I guess not?
Click to expand...
Click to collapse
Most extended batteries tend to add a lot of bulk (more than cases sometimes). The person who emailed you back may not be aware that the GN's extended battery adds about 1-2 mm of bulk to the bottom half of the phone.
Since the holder is a slide-in type, I can't see this being 'millimeter-tight'. Don't take my word for it but I'm willing to bet that this will fit even with the extended battery on.
I guess we won't know for sure until someone gets the fitted holders and try it though. I'd try, but I've a case so the fitted ones do me no good for sure.

nomisunrider said:
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
I emailed them asking if they have plans for such a device for the galaxy nexus.
Click to expand...
Click to collapse
80 bucks for that dock. Ouch. Good concept, but that is a bit rich.

I wish you could buy these at a store. I've already got the whole set for the Nexus One and I've been waiting for the GN mount. I just added to my cart and it's an extra $20 in shipping (to Toronto). So after duty at the border I'm looking easy at $60 just for that one piece of molded plastic. Yeah the mount is great, but that's seriously expensive.

I've used their cases for the last 2 years, nexus s and thunderbolt, and they are great. I still have my Nexus S holder and the picture of the one on their site for the GNex looks like the same style, if so it should work with the extended battery. The slide in case is tight on the sides but leaves a gap behind the phone, see attached pic. The phone slides into that groove and the groove itself is very thin so it doesn't appear it will interfere with the rear battery cover at all.

Proclips is a great solution. I've used it for my car for years. I used them in 3 different cars. Pricey however, it works very well. A+

Got a negative response =(
Unfortunately not. We only have adjustable holder with charging for our Apple line. These have all the same connectors in exact the same location.
For other phones there are too many differences in charging location and thickness of cases.
Best Regards,
Customer Service
ProClip USA, Inc.
nomisunrider said:
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
http://www.proclipusa.com/brodit-de...and-pass-through-connector--516165-18357.aspx
I emailed them asking if they have plans for such a device for the galaxy nexus.
Click to expand...
Click to collapse

Hi
For those in the UK... just ordered an active mount from http://www.mountonus.com/
£59.99... bit steep but I guess thats the price you pay for a nice phone-specific/car-specific mount!

nomisunrider said:
Got a negative response =(
Unfortunately not. We only have adjustable holder with charging for our Apple line. These have all the same connectors in exact the same location.
For other phones there are too many differences in charging location and thickness of cases.
Best Regards,
Customer Service
ProClip USA, Inc.
Click to expand...
Click to collapse
It was to be expected. They are not going to design a niche product for a phone until it sells consistently in the millions. That said... Creating a Micro USB small swing arm to make it universal should be too hard....
If I feel industrial, I might see what I can make on my own.

Got case on phone, is there a desktop charger that will fit?

Got a TPU case on my phone and love it. Is there a desktop charger other than the seidio one that could fit it?

Just use a USB cord with a case with a prop, works great
Sent from my Galaxy Nexus using xda premium

neederishelp said:
Just use a USB cord with a case with a prop, works great
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
what exactly do you mean ??
maybe you have a link or some guide..
Thanks in advance

get one that is made for the galaxy note.

kms108 said:
get one that is made for the galaxy note.
Click to expand...
Click to collapse
do you have a link?

neederishelp said:
Just use a USB cord with a case with a prop, works great
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
i know i can do something crappy like this but was looking for something possibly that would look nice. I did come across this and may see if I can have a friend help me with this as its way out of my league.
http://yanminhong.blogspot.com/2012/01/galaxy-nexus-dock-mod.html

kms108 said:
get one that is made for the galaxy note.
Click to expand...
Click to collapse
Do you know for sure it would work?
Sent from my Galaxy Nexus using xda premium

I got a few of these: http://www.ebay.com/itm/SAMSUNG-GALAXY-S2-S-II-I9100-ZENIS-DESKTOP-DOCK-CHARGER-CRADLE-/220883609072?_trksid=p4340.m185&_trkparms=algo%3DSIC.NPJS%26its%3DI%252BC%26itu%3DUA%26otn%3D5%26pmod%3D270865448058%26ps%3D63%26clkid%3D5859734319996833550
and they have worked with all my Samsung Android phones WITH "thinner" type cases. When I put the Diztronics case on the GNex it didn't fit by a hair so I took a Dremel tool and ground down the front edge just a little. It looks a LOT worse in the picture (since it is close up and due to the lighting) then it does on my desk but it could also be done a lot neater. I kind of slipped with the Dremel. For the price, these docks can't be beat. They only make them in 1 size yet they advertise them as if they are different (and jack up the prices depending on the phone). There is NO audio or video out, it's simply a charge/sync/nightstand cradle.

Today I broke down and ordered the "RND Power Solutions Deluxe 2nd Battery Charger and Data Sync Cradle" from amazon.com (too new to post a link, just give it a search).
This may be what you are looking for, because it is described as having an insert you can put in/remove depending on the case you are using.
I should have this guy in-hand Friday and I can give you a more detailed review.

wookaru said:
Today I broke down and ordered the "RND Power Solutions Deluxe 2nd Battery Charger and Data Sync Cradle" from amazon.com (too new to post a link, just give it a search).
This may be what you are looking for, because it is described as having an insert you can put in/remove depending on the case you are using.
I should have this guy in-hand Friday and I can give you a more detailed review.
Click to expand...
Click to collapse
Looking forward to read it
Sendt fra min Galaxy Nexus med Tapatalk

Someone just posted a review of the RND Power Solutions dock in this forum.
http://forum.xda-developers.com/showthread.php?t=1465597
Looks like his LTE phone with a thin case was a tight fit, so this may not be what you are looking for :-(

wookaru said:
Someone just posted a review of the RND Power Solutions dock in this forum.
http://forum.xda-developers.com/showthread.php?t=1465597
Looks like his LTE phone with a thin case was a tight fit, so this may not be what you are looking for :-(
Click to expand...
Click to collapse
Not sure you´r correct, since they are saying in the reviews, that the sparepart charger doesn´t fit their type of battery, but its ment for the GSM version. .
So IMO this one on Amazon is for the GSM-version, but still wil work for the LTE versions phones, but not the spare battery they may want to charge..

That looks to be the same as the KiDiGi one listed on the Mobi site except the Amazon price is a lot less expensive. However on the Mobi site it is listed as a GSM (i9250) version.
I've been tempted as they also have a car dock with the same form factor but I'm really looking for something that looks decent but allows me to leave my Qmadix case on the phone.

tgmorris said:
That looks to be the same as the KiDiGi one listed on the Mobi site except the Amazon price is a lot less expensive. However on the Mobi site it is listed as a GSM (i9250) version.
I've been tempted as they also have a car dock with the same form factor but I'm really looking for something that looks decent but allows me to leave my Qmadix case on the phone.
Click to expand...
Click to collapse
it's the same thing.

kms108 said:
it's the same thing.
Click to expand...
Click to collapse
Has any of you bought from 4u-mobi??
Galaxy Nexus-Tapatalk

I finally got the charging dock from 4u-mobi and can confirm that the GSM model with a casemate barely there case will fit..
I also got a s-curve TPU case, that fit this dock as well....
In both combinations you need to take off the insert

what about the clingo desktop stand. i;ve been looking at getting a universal desktop dock so that i can use it with a case and future phones.

neotekz said:
what about the clingo desktop stand. i;ve been looking at getting a universal desktop dock so that i can use it with a case and future phones.
Click to expand...
Click to collapse
I just ended up getting the gogostand and taping it to my desk. Works flawless. Yes it doesnt charge, but I couldnt find anything that I liked without having to remove my case each time. And I wasnt going to do that.

Case with batteries possibles?

Since One X has the pogo pin at the bottom that support charging, will it be possible to have case with extended batteries connect to OneX via the pogo pin?
Majority of case w/ batteries (for other phones) makes the phone bigger since it needs to connect to the port at the side. with pogo pin, the case can be same side, just making the phone a big thicker.

it's possible, but whether it will become reality will depend on HTC and third-party manufacturers..

I inquired about something like this from power skin, got a reply that a case will be available in about 40 days, not sure if they'll be using the pogo stuff or standard micro usb
Sent from my HTC One X using Tapatalk 2

They have them for the Galaxy SII (with the MicroUSB connector) so it's obviously possible. I wonder if the charging pins on the back could be used - that would make it a much sleeker case. I would buy one...

gdelrosario said:
I inquired about something like this from power skin, got a reply that a case will be available in about 40 days, not sure if they'll be using the pogo stuff or standard micro usb
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
God I would hope they use the pogo pins... I mean they're so convenient!

Should be possible. Pogo pins are just USB really, only reason not to do it is poor design.
M.
Sent from my HTC One X using xda premium

I am also waiting for an accessory like this. Hope some company makes one I think it would be very popular!

A TPU case with a battery capable of recharging the phone 1.2 times would be great, especially with pogo-pin power delivery.
I'd imagine that it would run from just at the very edge of where the camera is, all the way down to just short of the speaker grille, and the full width of the back. That probably means that the battery can be comparatively thin instead of increasing thickness, or so I'd hope.

I am awaiting such cases badly ... if such a battery case is released I would buy it instantly ...
Sent from my HTC One X using xda premium

You know what's better than a case with a battery? A case with a battery and sdcard slot! If Usbotg gets working, it really could be a possibility!
Sent from my Thrive using Tapatalk 2

If it can be done for the galaxy nexus, then its ideal to have it for the ox, although it really depends on the manufacturers and I really think sd card thing would be brilliant
Sent from my HTC One X using Tapatalk 2

Looks like our cries have been heard!
http://www.ebay.com/itm/2200mAh-Ext...551334?pt=PDA_Accessories&hash=item231e5215a6
Too bad only in black......for now.

velvetdolphin said:
Looks like our cries have been heard!
http://www.ebay.com/itm/2200mAh-Ext...551334?pt=PDA_Accessories&hash=item231e5215a6
Too bad only in black......for now.
Click to expand...
Click to collapse
I bought this item already. Actually there's another model which comes in both white and black. Here it is.
http://www.ebay.com/itm/3200mAh-Whi...433515?pt=PDA_Accessories&hash=item1e6ee3acab

The second model looks awful. Really happy with this development though as the limited battery life for my needs is the only thing holding back this phone for me

digimaz said:
I bought this item already. Actually there's another model which comes in both white and black. Here it is.
http://www.ebay.com/itm/3200mAh-Whi...433515?pt=PDA_Accessories&hash=item1e6ee3acab
Click to expand...
Click to collapse
Cool! If not too much trouble, plz do a short review of the one you have with pics when possible....tia

velvetdolphin said:
Cool! If not too much trouble, plz do a short review of the one you have with pics when possible....tia
Click to expand...
Click to collapse
Will do!

How does this case work? Does it charge your phone battery or does your phone see it as part of the phone so just uses the power when it needs it?
Sent from my HTC One X using xda premium

Looks great, fancy the 2200mah black myself but 25 days shipping could be an issue lol
Sent from my HTC One X using XDA

Cool I've just ordered the 2200mha one as it looks a lot better and seems to give better protection. Powerskin should have listened to us and not use the stupid USB connection. I will post up a short review if I get mine first. Over 12 hours video playback is more than enough for me.... Can't wait
Sent from my HTC One X using Tapatalk 2

audiobookman said:
Cool I've just ordered the 2200mha one as it looks a lot better and seems to give better protection. Powerskin should have listened to us and not use the stupid USB connection. I will post up a short review if I get mine first. Over 12 hours video playback is more than enough for me.... Can't wait
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
Yea definitely post up a review. If its of good quality and all, will buy one myself.
Sent from my HTC One X using XDA

Touchstone MOD

I didn't want to Void my warranty by soldering the touchstone wires inside the phone so i cut open a micro USB cable and wired the coil to it. Much easier way to do it i recon.

Neat idea, though I'm not really convinced wireless charging is an improvement over wired so long as the phone still has to be right next to the hub.
Nice proof of concept though, certainly more user friendly than soldering.

Always nice to see a Touchstone mod. I wired my coil up to the pogo pins for a neater appearance, and to leave the micro USB free. Works very nicely as a desktop dock/cradle.

itsdaaaave said:
Always nice to see a Touchstone mod. I wired my coil up to the pogo pins for a neater appearance, and to leave the micro USB free. Works very nicely as a desktop dock/cradle.
Click to expand...
Click to collapse
I tried wiring it to the Pogo pins on the outside of the phone but no success. Unfortunately i sent my phone back for a full refund today (Screen seems to be coming off and vibration motor is weak) This was my 4th replacement. Given up with HTC now. I'm getting a Sony Xperia Z

omondisingh said:
I tried wiring it to the Pogo pins on the outside of the phone but no success. Unfortunately i sent my phone back for a full refund today (Screen seems to be coming off and vibration motor is weak) This was my 4th replacement. Given up with HTC now. I'm getting a Sony Xperia Z
Click to expand...
Click to collapse
Being the 4th replacement, I have to say it is something you are doing, and not the manufacture

omondisingh said:
I tried wiring it to the Pogo pins on the outside of the phone but no success. Unfortunately i sent my phone back for a full refund today (Screen seems to be coming off and vibration motor is weak) This was my 4th replacement. Given up with HTC now. I'm getting a Sony Xperia Z
Click to expand...
Click to collapse
A very small piece of copper foil screwed up and pushed into the pogo pin recess was how I managed it. Not the most elegant solution, but it works well Top pin is +5V, bottom pin is Ground.

jakearnott said:
Being the 4th replacement, I have to say it is something you are doing, and not the manufacture
Click to expand...
Click to collapse
1st phone had Audio stutter issues and the vibration motor was making a clicking noise, Sent it for repair and returned it the same way. Not even the software update fixed the issue. The second one had Screen flex issues and capacitive button light leaked a lot into the screen. Third one has screen flicker issue mostly visible in grey areas. Software upgrade and custom Roms did not fix the issue. The 4th one's vibration motor was weak and did not work sometimes and the screen was loose from the top. Its like they have not used strong glue to stick the Digitizer to the LCD panel. My girlfriend has the same phone which she got on contract yet she has no issues with it. I guess i'm an unlucky guy when it comes to HTC. I should get my Xperia Z on March 1st Super exited

itsdaaaave said:
A very small piece of copper foil screwed up and pushed into the pogo pin recess was how I managed it. Not the most elegant solution, but it works well Top pin is +5V, bottom pin is Ground.
Click to expand...
Click to collapse
I'm basically thinking of doing the same thing that you did but my case is kinda tight . How much do you think it adds to the thickness? Where did you get materials from?
Sent from my HTC One X using xda app-developers app

PaKii94 said:
I'm basically thinking of doing the same thing that you did but my case is kinda tight . How much do you think it adds to the thickness? Where did you get materials from?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
I'm using the sgp ultra thin case and there is no thickness difference. Materials can be found on eBay.
Sent from my EndeavorU using xda premium

PaKii94 said:
I'm basically thinking of doing the same thing that you did but my case is kinda tight . How much do you think it adds to the thickness? Where did you get materials from?
Click to expand...
Click to collapse
My case is both thin and tight to the back, and it will fit in there as it is, but it will leave a bulge. I refined this by carving out recesses in the case with a dremel for a better fit, and now you wouldn't know that anything is in there. I recommend using circuitry from the Palm Pre back case rather than the Pixi as there is a smaller circuit board to fit in.
Materials are all from ebay. I just bought another Pre case so I can mod my HTC Desire, and that cost me £3.50 delivered. Touchstone bases can usually be found for about £5. If you don;t see any on there for such cheap prices, then just wait a few days and one will almost always come up. Copper tape/foil is sold on there too, usually marketed as snail repellent.
A word of warning about the Touchstone base: you need a very slim micro USB plug to fit in the narrow gap. The One X lead works perfectly, but anything bigger will not be able to go through the opening.
Finally here's a diagram showing the thickness of the parts. Have fun modding

Btw u got nice cover and rom,from where did u get this cover and which rom r u using.
Sent from my HTC One X using xda app-developers app

manikdhir said:
Btw u got nice cover and rom,from where did u get this cover and which rom r u using.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Its a Spigen Cover with a Monster Energy sticker on it. I think i was using a sense rom with xperia Z launcher.