Develop Bugs

Car Dock Kit

http://www.t-mobile.com/shop/AddOns/Accessories/AccessoryDetailPopUp.aspx?accessory=916075f6-938d-4ce1-a6d3-69a685769d1a&inCart=True&catCode=22
I travel alot and one of the main reasons I bought the GS2 was for the big screen to use with Nav. Just ordered this today. Will post pics and review
REVIEW:
Got the dock today. Gotta say, not too bad. Although I don’t really think it’s worth more than about $25 tops. The build quality is ok. Everything is plastic, but it feels kind of light (the suction holder). Guess that’s a good thing if it’s being mounted to the windshield.
What’s included: Phone Dock, Suction Holder, Car Charger, Sticky suction pad (to use on your dash)
Suction Holder
There are 3 main components to this. The suction it pretty heavy duty. Probably better than my Garmin windshield mount. Once positioned on the glass, there’s a lever you push down drawing the air out making for a pretty good and strong contact. To release it from the windshield is just as easy. Just pull the same lever up to release.
The holder allows for full 360 rotation of the phone. Loosen the round knob to position and tighten. Once tightened, it’s pretty snug.
Where the phone dock connects, the suction holder has a little spring loaded push lever that’s used to clamp the phone dock to the holder. Same method is used to release the phone dock.
Phone Dock
Again, it’s pretty light. I wouldn’t say it’s feels cheap but just really light. The phone fits in pretty sung. It’s definitely not going anywhere. The dock also has a cut out for the camera, which is nice if you want to take pics of the road or maybe even a video of the guy in front of you with a lowered Silverado with a mural of his trunk on his tailgate 
Once the phone is in, the bottom end of the phone dock slides in and out making the usb contact. On the back of the dock, you have a micro usb port for charging and a 3.5mm line out jack. My only concern is with time, this portion will get loose. Seems like there’s 2 positions this click into as you slide it one way or the other.
Car Charger
It’s a micro usb car charger. Nothing more to say. Always good to have a spare one.
The dock definitely DOES NOT accept the phone with any cases. Don’t know about skins though. It’s a pretty sung fit with. Going to head over to TMO sometime this week and pick up the a ZAGG Dry application skin and see.
Figured it would, but as soon as you slide the plug from the dock into the phone, it goes into car mode right away, even without it being plugged into a power source. This can be deactivated by going into notifications and clicking Deactivate Car mode.
All in all, I’d have to say I’m pretty pleased with it. Not really pleased about how much it costs, but hey…It would have been nice for them to include an audio cable with the package. I bought this to replace my older Garmin Nav. Figure it’s much easier having this than traveling with the Garmin.
Update: Looks like this is going back. The line-out doesn't work. Getting no sound

smellmyfingers said:
http://www.t-mobile.com/shop/AddOns/Accessories/AccessoryDetailPopUp.aspx?accessory=916075f6-938d-4ce1-a6d3-69a685769d1a&inCart=True&catCode=22
I travel alot and one of the main reasons I bought the GS2 was for the big screen to use with Nav. Just ordered this today. Will post pics and review
Click to expand...
Click to collapse
does anyone else find it interesting that all of these same accessories cost $29.95 with the Vibrant and now cost $44.95 with the SGSII?

Thinking of picking this up:
http://www.ebay.com/itm/Exogear-Exo...ccessories&hash=item588ef6bfb4#ht_4693wt_1270
Seems like a decent quality holder that will work no matter any case I use.

luckyduck69 said:
does anyone else find it interesting that all of these same accessories cost $29.95 with the Vibrant and now cost $44.95 with the SGSII?
Click to expand...
Click to collapse
Nope. Makes sense, T-Mobile just released the phone so they hiked up all prices on "new" accessories. It's all naming/branding my man.

Looks nice...if u get it post some pics please.
I have one but makes too much noise when the car moves.
Tmo Galaxy S2

http://www.amazon.com/MSW-Exogear-E...ZLOS/ref=sr_1_6?ie=UTF8&qid=1319143393&sr=8-6
It is cheaper on Amazon. I am searching for a few other universals and I will make a decision in a day or two.

Was feeling frisky so picked it up at the store with the phone. Works great but the phone is held rather tightly and requires two hands to remove it when getting out of your car. Might loosen a bit over time, but a PITA for now. Phone also recognizes that this is a car dock (as opposed to desktop dock) and kicks on the VoiceTalk app automatically. Kind of nice.
-- edit --
Used a universal on my last phone... have to say that having the charger plug into the mount directly is hands-down worth the extra money. I hated having to find the dangling end of the usb cord every time I got in my truck... especially in the dark. With the made-for-it mount, you sit the phone in the mount and then slide the bottom part up which engages the charge and locks in the phone. All with one hand.
-GP

Dsmwookie said:
http://www.amazon.com/MSW-Exogear-E...ZLOS/ref=sr_1_6?ie=UTF8&qid=1319143393&sr=8-6
It is cheaper on Amazon. I am searching for a few other universals and I will make a decision in a day or two.
Click to expand...
Click to collapse
Have one and the best part about this mount is that it sticks to almost part in my car. Aside from the really curved parts.

Bought my first car dock for my old Vibrant few months ago, now have to get it again for my new SGS2. Like before I am getting OEM directly from Samsung website. Not sure what TM sells but the one I saw in their store looks pretty crappy from some 3rd party vendor.
Sent from my SGH-T989 using xda premium

The car dock... excuse me, "vehicle navigation mount" I got at the t-mo store two days ago is a Samsung-branded accessory. Guy had to actually open the box that UPS delivered that morning. Perhaps your store didn't have them yet?

Good for you! I guess the TM store I had a pleasure to visit had different model on display. Looked really ugly comparing to oem model.
Sent from my Galaxy Tab 8.9 using XDA Premium

esdwa said:
Good for you! I guess the TM store I had a pleasure to visit had different model on display. Looked really ugly comparing to oem model.
Sent from my Galaxy Tab 8.9 using XDA Premium
Click to expand...
Click to collapse
they should start getting them in. There OEM it should be in green and white box with samsung all over it

$64,000 question: will it work with a case?

What do you think of these Herbert Richter German made windshield mount? The mount is used in a Pioneer AVIC-F500BT GPS which is quite heavy.

ctkatz said:
$64,000 question: will it work with a case?
Click to expand...
Click to collapse
Probably not as it is made to fit the device snugly. This is why I use a pouch belt clip as I use my phone all the time for navigation and can't be taking a case on and off every time.

My Exogear mint will be here tomorrow. I'll let you know how it is. Cost $18 shipped off Amazon.
Sent from my SGH-T989 using xda premium

Some quick shots of my Exogear mount. Sticks to just about any surface and holds most phones in a case. Video is uploading as we speak.
---------- Post added at 06:27 PM ---------- Previous post was at 05:44 PM ----------
http://youtu.be/PApQgF4Q8Lk

cheap but nice mount
Just rec this mount ordered 2 one for my s2 and one fr my wifes vibrant really pleased with them ordered one more {ebay}Samsung Galaxy S II T989 Heavy Duty Windshield Premium Car Mount Phone Holder

Bummer. I need one that works with cases and has a longer arm to position the unit closer to the dash from the deeply set window. I really liked my previous one that I got from Amazon, but the bearing wore out or something and it won't stay in any position other than limply hanging down now...
Thanks for the review!

Splaktar said:
Bummer. I need one that works with cases and has a longer arm to position the unit closer to the dash from the deeply set window. I really liked my previous one that I got from Amazon, but the bearing wore out or something and it won't stay in any position other than limply hanging down now...
Thanks for the review!
Click to expand...
Click to collapse
Are you referring to mine? It works with a case on.
Sent from my SGH-T989 using Tapatalk

Got case on phone, is there a desktop charger that will fit?

Got a TPU case on my phone and love it. Is there a desktop charger other than the seidio one that could fit it?

Just use a USB cord with a case with a prop, works great
Sent from my Galaxy Nexus using xda premium

neederishelp said:
Just use a USB cord with a case with a prop, works great
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
what exactly do you mean ??
maybe you have a link or some guide..
Thanks in advance

get one that is made for the galaxy note.

kms108 said:
get one that is made for the galaxy note.
Click to expand...
Click to collapse
do you have a link?

neederishelp said:
Just use a USB cord with a case with a prop, works great
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
i know i can do something crappy like this but was looking for something possibly that would look nice. I did come across this and may see if I can have a friend help me with this as its way out of my league.
http://yanminhong.blogspot.com/2012/01/galaxy-nexus-dock-mod.html

kms108 said:
get one that is made for the galaxy note.
Click to expand...
Click to collapse
Do you know for sure it would work?
Sent from my Galaxy Nexus using xda premium

I got a few of these: http://www.ebay.com/itm/SAMSUNG-GALAXY-S2-S-II-I9100-ZENIS-DESKTOP-DOCK-CHARGER-CRADLE-/220883609072?_trksid=p4340.m185&_trkparms=algo%3DSIC.NPJS%26its%3DI%252BC%26itu%3DUA%26otn%3D5%26pmod%3D270865448058%26ps%3D63%26clkid%3D5859734319996833550
and they have worked with all my Samsung Android phones WITH "thinner" type cases. When I put the Diztronics case on the GNex it didn't fit by a hair so I took a Dremel tool and ground down the front edge just a little. It looks a LOT worse in the picture (since it is close up and due to the lighting) then it does on my desk but it could also be done a lot neater. I kind of slipped with the Dremel. For the price, these docks can't be beat. They only make them in 1 size yet they advertise them as if they are different (and jack up the prices depending on the phone). There is NO audio or video out, it's simply a charge/sync/nightstand cradle.

Today I broke down and ordered the "RND Power Solutions Deluxe 2nd Battery Charger and Data Sync Cradle" from amazon.com (too new to post a link, just give it a search).
This may be what you are looking for, because it is described as having an insert you can put in/remove depending on the case you are using.
I should have this guy in-hand Friday and I can give you a more detailed review.

wookaru said:
Today I broke down and ordered the "RND Power Solutions Deluxe 2nd Battery Charger and Data Sync Cradle" from amazon.com (too new to post a link, just give it a search).
This may be what you are looking for, because it is described as having an insert you can put in/remove depending on the case you are using.
I should have this guy in-hand Friday and I can give you a more detailed review.
Click to expand...
Click to collapse
Looking forward to read it
Sendt fra min Galaxy Nexus med Tapatalk

Someone just posted a review of the RND Power Solutions dock in this forum.
http://forum.xda-developers.com/showthread.php?t=1465597
Looks like his LTE phone with a thin case was a tight fit, so this may not be what you are looking for :-(

wookaru said:
Someone just posted a review of the RND Power Solutions dock in this forum.
http://forum.xda-developers.com/showthread.php?t=1465597
Looks like his LTE phone with a thin case was a tight fit, so this may not be what you are looking for :-(
Click to expand...
Click to collapse
Not sure you´r correct, since they are saying in the reviews, that the sparepart charger doesn´t fit their type of battery, but its ment for the GSM version. .
So IMO this one on Amazon is for the GSM-version, but still wil work for the LTE versions phones, but not the spare battery they may want to charge..

That looks to be the same as the KiDiGi one listed on the Mobi site except the Amazon price is a lot less expensive. However on the Mobi site it is listed as a GSM (i9250) version.
I've been tempted as they also have a car dock with the same form factor but I'm really looking for something that looks decent but allows me to leave my Qmadix case on the phone.

tgmorris said:
That looks to be the same as the KiDiGi one listed on the Mobi site except the Amazon price is a lot less expensive. However on the Mobi site it is listed as a GSM (i9250) version.
I've been tempted as they also have a car dock with the same form factor but I'm really looking for something that looks decent but allows me to leave my Qmadix case on the phone.
Click to expand...
Click to collapse
it's the same thing.

kms108 said:
it's the same thing.
Click to expand...
Click to collapse
Has any of you bought from 4u-mobi??
Galaxy Nexus-Tapatalk

I finally got the charging dock from 4u-mobi and can confirm that the GSM model with a casemate barely there case will fit..
I also got a s-curve TPU case, that fit this dock as well....
In both combinations you need to take off the insert

what about the clingo desktop stand. i;ve been looking at getting a universal desktop dock so that i can use it with a case and future phones.

neotekz said:
what about the clingo desktop stand. i;ve been looking at getting a universal desktop dock so that i can use it with a case and future phones.
Click to expand...
Click to collapse
I just ended up getting the gogostand and taping it to my desk. Works flawless. Yes it doesnt charge, but I couldnt find anything that I liked without having to remove my case each time. And I wasnt going to do that.

Best Car Dock for LTE Nexus with Case and Extended Battery?

I'd prefer something windshield mounted. If I'm not getting the 3-pin version, I don't see why I should have to remove my case for the car dock, so I'd like one of those generic car mounts.
I have no experience with them though. What's the best one? Any recommendations?

check out Ram Mounts. google it
They are the most sturdy, but can be expensive.
i use the X mount one with my gnex and its awesome.

FYI I saw someone mention using the standard Garmin nuvi suction cup mount, with a GN in a case it does seem to fit.
Sent from my Galaxy Nexus using XDA App

i have the european dock (3 pins present) and very firm. Little tight but other than that holds it very well

Javillanueva67 said:
i have the european dock (3 pins present) and very firm. Little tight but other than that holds it very well
Click to expand...
Click to collapse
This thread is about the verizon nexus. You say you have the european samsung dock with the pogo pins and the verizon phone fits in it?
If so, do the pins line up and work to put in in car mode?

I ordered the VZW/LTE specific version of the car dock from mycellworld.com. its supposedly legit in that it has the 3 pins and is definitely for the LTE handset. its on back order, supposed to ship next week. will review as soon as it shows up.
Sent from my Galaxy Nexus using Tapatalk

p.s. I have the extended OEM battery and I also have the generic car dock (no 3 pins) and it fits no problem.
Sent from my Galaxy Nexus using Tapatalk

I know you said you prefer windshield mounted but I just bought the Tetrax FIXWAY mount and I love it. There is a large thread on it with lots of pics/videos. That thread is one of the reasons I bought it.
I too was looking for a car mount to be used with a case and an extended battery. I was just going to use a generic one off of amazon that was like a clamp style. Even though the Tetrax doesn't suction cup to the windshield, I think it is worth you looking at if you haven't already.
I mounted mine onto my dash and think it works perfectly. It doesn't obstruct my view at all and its is just a quick glance down to check navigation/music.
The phone is really quick to just 'snap' it in place. The only downside to me is that you have to manually plug in the power and aux cords but I don't even see this as a true downside since you will have to do this with any generic mount you would need in order to keep the case on.
If you are interested and would like me to take any additional pictures for you just let me know and I would be happy to do what I can

ProClip adjustable width mount is what I'd recommend

bpowder1966 said:
check out Ram Mounts. google it
They are the most sturdy, but can be expensive.
i use the X mount one with my gnex and its awesome.
Click to expand...
Click to collapse
I ordered the X-grip mount with a medium size arm and the adhesive rubber ball base(I plan on keeping my car until its run into the ground) on January 11th.
Soon after ordering they informed me that the base wasn't in stock but it would ship out in 1-2 weeks. 2 weeks past with no word, then he said it would ship out at the end of the week. Still no shipping
I figured CS people would know not to give unrealistic ETA dates(especially when ram-mount makes the damn things themselves), especially over and over again, stringing the customer along...

rickt said:
I ordered the VZW/LTE specific version of the car dock from mycellworld.com. its supposedly legit in that it has the 3 pins and is definitely for the LTE handset. its on back order, supposed to ship next week. will review as soon as it shows up.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Let us know when you get it because I read a lot on the thread about the 3-pin that some people got burned by claims of the docks having 3 pin connection when they actually didn't. Keep us updated!

bpowder1966 said:
check out Ram Mounts. google it
They are the most sturdy, but can be expensive.
i use the X mount one with my gnex and its awesome.
Click to expand...
Click to collapse
Can it swivel to horizontal mode? Currently, this one seems to be the best.
jcwarren217 said:
I know you said you prefer windshield mounted but I just bought the Tetrax FIXWAY mount and I love it. There is a large thread on it with lots of pics/videos. That thread is one of the reasons I bought it.
I too was looking for a car mount to be used with a case and an extended battery. I was just going to use a generic one off of amazon that was like a clamp style. Even though the Tetrax doesn't suction cup to the windshield, I think it is worth you looking at if you haven't already.
I mounted mine onto my dash and think it works perfectly. It doesn't obstruct my view at all and its is just a quick glance down to check navigation/music.
The phone is really quick to just 'snap' it in place. The only downside to me is that you have to manually plug in the power and aux cords but I don't even see this as a true downside since you will have to do this with any generic mount you would need in order to keep the case on.
If you are interested and would like me to take any additional pictures for you just let me know and I would be happy to do what I can
Click to expand...
Click to collapse
I'm really tempted. Both options above are expensive. I was worried that the attachment thing might look like ****, but from the pictures in that thread, it doesn't look too bad. Same question though, can I turn it to landscape for Navigation? Also, how sturdy is the connection? Will it fall off as my car hits a bump or something?

acr89 said:
ProClip adjustable width mount is what I'd recommend
Click to expand...
Click to collapse
+1 to ProClip! They have a mount that can adjust with different cases, and it's very sturdy. The one I have mounts to my vent though (I prefer this anyway since my windshield is so...sloped). They are kinda pricey also, but they don't look too bulky and are specifically made for your car model. I love mine.

Would like to bump this thread to see if anyone else had suggestions for good universal car mounts/docks that will work with a GNEX in a case.

Samcobra said:
I'd prefer something windshield mounted. If I'm not getting the 3-pin version, I don't see why I should have to remove my case for the car dock, so I'd like one of those generic car mounts.
I have no experience with them though. What's the best one? Any recommendations?
Click to expand...
Click to collapse
try the iBolt pro dock alumina... this car dock works with just about any phone, and especially works great with the galaxy nexus.... this cardock allows you to place it on either the windshield, dashboard, or air vent since extra pins are supplied to place the dock there and theres no need to remove your case from your phone... which is a god send.. it only cost me about $35 on amazon, so i cant argue with the price... i have excellent photos of it, that i'll share as soon as i reach the 10 post mark, that allows me to attach files and externals link...

SNNTEC said:
i have excellent photos of it, that i'll share as soon as i reach the 10 post mark, that allows me to attach files and externals link...
Click to expand...
Click to collapse
You're past 10 posts, pics please!

Airframe - Car Mount Vent Kit

Thought id take a gamble and just ordered one of these:
http://airframe.kenu.com/
Looked perfect for my needs and future proof due to generic design.

Have you recieved it yet? Impressions?

I like the fact that the clip is metal, my last plastic air vent holder snapped within a day of buying it :/

Won't get until next month as it appears a little like kick starter projects. Does look good though and future proof to a certain extent
Sent from my HTC One using Tapatalk 2

Ok, ordered one aswell. I hope I'll get it before my HTC arrives late april.

discomega said:
Ok, ordered one aswell. I hope I'll get it before my HTC arrives late april.
Click to expand...
Click to collapse
what if you want to use the heater in your car? youll be blowing hot air right onto your phone

djbenny1 said:
what if you want to use the heater in your car? youll be blowing hot air right onto your phone
Click to expand...
Click to collapse
If it were me, I'd just change the fan settings to not blow hot air straight at me (it's uncomfortable most of the times anyways). Use the upper or lower vent settings. If I had no other choice but get that Hair Dryer effect with the front vents, I'd put a credit card (or CD maybe) in between the Airframe clips and fit it inside the narrow CD player slot. Just sayin'.

djbenny1 said:
what if you want to use the heater in your car? youll be blowing hot air right onto your phone
Click to expand...
Click to collapse
on most cars you can turn off the vents individually .. at least all cars I have owned so far ..
and in summer it comes in handy, you can cool the phone down haha

Sv: Airframe - Car Mount Vent Kit
djbenny1 said:
what if you want to use the heater in your car? youll be blowing hot air right onto your phone
Click to expand...
Click to collapse
I have a ventmount for my iPhone 4 today. Use it too cool phone during summer and turn off vent during winter. Works perfectly. Used it for 2 years in this way.
Sent from my N7.

That looks rather awesome May get myself one!
Edit: Just did... damn impulse buying! lol

Tempted to order but it only fits up to 4.8" so not future proof.

ichi2k said:
Tempted to order but it only fits up to 4.8" so not future proof.
Click to expand...
Click to collapse
Herbert Richter is the only universal future proof mounting system.

Sv: Airframe - Car Mount Vent Kit
compact_bijou said:
Herbert Richter is the only universal future proof mounting system.
Click to expand...
Click to collapse
Maybe so. But so ugly. Herbert will not enter my car
Sent from my N7.

discomega said:
Maybe so. But so ugly. Herbert will not enter my car
Click to expand...
Click to collapse
WTF are you on about?

oh damn also want one of these, but shipping to germany for about 20 bugs is way to much

Just got my shipping email so I'll take some pics when it arrives
Sent from my HTC One using Tapatalk 2

only does portrait, no landscape?
edit: nm, it does: "Yes, assuming the make and model of your car’s air vent has enough space to display your phone horizontally."

Got the Mountek cd mount since I haven't listened to a cd for years. I have a bluetooth with usb and listen to Pandora or my mp3s.
It doesn't block the vents and adjusts vertical and horizontal.
http://www.amazon.com/gp/aw/d/B004G1L52Q/ref=mp_s_a_1?qid=1367353620&sr=8-1&pi=SL75
Sent from my HTC One™ using xda app

I was wondering how you all are getting on after using them for a while, are they worth buying? I cant find any cheaper alternatives and the international shipping its quite expensive...but if they are awesome I might just buy one.

fracmo2000 said:
I was wondering how you all are getting on after using them for a while, are they worth buying? I cant find any cheaper alternatives and the international shipping its quite expensive...but if they are awesome I might just buy one.
Click to expand...
Click to collapse
i like it feels solid and quality, its smaller than what you think, i throw away all my old one
---------- Post added at 07:48 AM ---------- Previous post was at 07:47 AM ----------
iraqgsm said:
i like it feels solid and quality, its smaller than what you think, i throw away all my old one
Click to expand...
Click to collapse
btw go to their facebook page and like them and you will get coupon, or watch their sales on facebook

Recommend a car holder...

hi guys
im going on a long road trip tomorrow so i was considering the official HTC d160 mount but not keen on spending that much on a mount.
anyone recommend an alternative or is the d160 really worth it?
thanks

simba2585 said:
hi guys
im going on a long road trip tomorrow so i was considering the official HTC d160 mount but not keen on spending that much on a mount.
anyone recommend an alternative or is the d160 really worth it?
thanks
Click to expand...
Click to collapse
I ordered the D160
and this one
http://www.amazon.com/iBOLT-xProDoc...&qid=1367492787&sr=8-2&keywords=ibolt+for+htc
Ibolt has always been a winner for me.

check this one works great for me
http://www.amazon.com/gp/product/B004G1L52Q/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

I have this one that was recommended in another thread.
It works great (so much so that now my wife wants one)
http://www.amazon.com/gp/product/B0099RGRT8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

The Brodit mounts ... which in my opinion are very good are available for pre-order now.
http://www.dsldevelopments.com/brodit/holder/HTC+One-Brodit-Holder.asp

I have the official one and it works great...
Once I connect the phone, it goes automatically to car mode. Also, it seems to b pretty strong

vent mounts the way to go:
http://www.kenu.com/products/airframe

ranova said:
vent mounts the way to go:
http://www.kenu.com/products/airframe
Click to expand...
Click to collapse
i like the look of this - cant seem to find UK availability.

:No-Frost: said:
I have the official one and it works great...
Once I connect the phone, it goes automatically to car mode. Also, it seems to b pretty strong
Click to expand...
Click to collapse
i would love to have it, but i dont want to take my case everytime i want to attach it

I ordered the official car dock today and I've read it's really high quality and not to mention works with the phone really well .
Sent from my HTCONE using xda premium

I'm happy with this one, and it's only $15
Arkon SM410: http://www.amazon.com/Arkon-SM410-U...F8&qid=1367507237&sr=1-1&keywords=arkon+phone

Wish I could find the D160 locally. I need to see if it will fit a certain spot in my car and don't feel like hassling with shipping something back.

ProClip
I went with the ProClip Dashboard mounts for my Mustang GT and the Universal T3 adjustable so mine would fit with the Otterbox Commuter. I used them about 5 years ago and loved them.
Should have it in a couple days I will let you know how it worked out.
http://www.proclipusa.com/mobile-device-holders/universal-holders/product/medium-universal-adjustable-proclip-holder-t3-246806.cmsv

geez these car docks are expensive...

Really like this one, its the Mountek nGroove Universal CD slot mount (sorry I cant post the link!!) It fits in your cd slot, which I really never use. Holds the One nice and firm.

iraqgsm said:
check this one works great for me
http://www.amazon.com/gp/product/B004G1L52Q/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I second this. Also worked well sideways in car mode.

Of the car mounts I've used, this Arkon one is my favorite so far: http://www.arkon.com/mobile-grip/mobile-grip-dashboard-mount-mg178.html

DJayRage said:
I have this one that was recommended in another thread.
It works great (so much so that now my wife wants one)
http://www.amazon.com/gp/product/B0099RGRT8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Click to expand...
Click to collapse
How does it hold up on the dashboard?

rnbkcalderon said:
How does it hold up on the dashboard?
Click to expand...
Click to collapse
Very well. Not sure what material the suction pad is made from but it sticks very well to my dashboard and window more so than any other car holders I have tried over the years.

Sticks a little too well for me. I can't reposition it.
Sent from my HTC One using Tapatalk 2