Related
Never thought I'd be the one to create a thread like this..
After I flashed the OKV4 ROM, strange things started to happen (this was after a full wipe). Apps kept force closing, etc. Later that day, when I picked up my phone, I saw the samsung logo flashing over and over. Making me unable to enter recovery.
Download mode still worked though and I proceeded to flash a stock firmware via ODIN. This did not help. Oh, and the Odin flash succeeded, without rebooting my phone though...
So, I'm still stuck with my phone which can't seem to get out of this strange loop.
HELP :C
I remember reading somewhere here that if you have flashed a diff FW now and then a possibility the last recent kernel is still in the system folder etc....this is maybe the cause of the bootloop.
Since you had confirmed going to download mode is possible..this may work logically... Why not do the following :
Get your phone rooted via Recovery (there is a thread here by The-E)..Once done flash arco68's CWM Recovery....Boot to recovery n do this :
Factory Format....Wipe n Clear including Delvik...Then go to Mount n Storage wipe every single folder...System...Data...Etc (this will wipe every single data left behind but I assure you the CWM will not be wiped) once done reboot n put the device into DL mode and use Odin to flash back to the stock FW.
From this moment the recovery will be replaced by stock version and the stock FW will be restored....once it boot up..Walla as I had done this over two times :
Best of Luck !!
Sent from my GT-I8150 using xda premium
I think you misunderstood me :/
This isn't the ordinary bootloop where the boot animation plays. It resets literally 2 seconds after starting. This makes me unable to enter the recovery at all. Thanks for the effort tho.
Tl;dr:I can not enter recovery mode.
treUse said:
I think you misunderstood me :/
This isn't the ordinary bootloop where the boot animation plays. It resets literally 2 seconds after starting. This makes me unable to enter the recovery at all. Thanks for the effort tho.
Tl;dr:I can not enter recovery mode.
Click to expand...
Click to collapse
Hi Bro...
I already discuss it in this Tread couple a days a go
You not alone bro
I ask The-E to mention all Wonder user to get safety flashing
Until this time we didn't get way to fix it yet
Ok, so I flashed a MIUI port for the AT&T Note 2, and it was disgusting...it crashed everything, and needless to say I ended up stuck at the boot logo for a long time. FINALLY managed to get it to flash via Odin...so I flashed Stock Rom...and now it's stuck on Samsung logo...Ok..so I go flash CWM...do a wipe and everything, and install CM10.1 via that...stuck at CM logo. I've left each ROM plugged in, stuck on boot screen for over 20-30 minutes each. I'm at a loss of what to do. Could I need to flash a kernel? or am I missing something obvious? The good news, I guess, is with a few steps, I can get into DL mode and use Odin, and I can flash CWM and get into that..but I can't inject anything into my phone so CWM can use it, I only have what's there now, which is CM10.1. I'm so mad...I've never had too many issues with ROMs but this one jacked things up badly...guess that's what I get for using a port even though it noted that everything was working now. Anyway...does anyone have any advice?
Edit: I flashed CWM, and tried to clear cache/dalvik then factory reset...the first two worked...as soon as I hit factory reset, that's where the screen goes black and it resets...it's like it just refuses to do it. I'm seriously at a loss here. Is it toast?
Edit again: sorry but I'm trying more to give more info. I went into CWM and went to advanced and started formatting one by one...it's when you hit format /data that it immediately dies and restarts. So..something weird is going on there. Can I use a PIT file for this phone, if it exists, to reformat and just get it going? I'm desperate...
Us this http://forum.xda-developers.com/showthread.php?t=2052779 on a PC.
Follow directions and Odin back to stock.
Sent from my SAMSUNG-SGH-I317 using xda premium
Ok, this is my first post so forgive if this is in the wrong section...
I have a friend's Galaxy Note 2 ATT that was stuck on the Galaxy Note 2 Boot screen, and it wouldn't go any further.
Because I work for Samsung at the Samsung Experience Shop, I tried running it through our smart reflash tool
-----> This didn't work because it would fully download it onto the phone, but when it got to the Android with the thing spinning in its chest, it would stop and ALWAYS freeze halfway.
Next step I tried doing was going through Samsung Kies and downloading the stock OS and load that, but the same Android with the spinning thing in its chest would show up and it would freeze.
Due to this guy being my friend I told him I would try anything to get his phone to work again (root, to custom recovery, to custom rom)
My steps so far:
1. I have successfully rooted my device via ODIN 1.85 by using CF-Auto-Root
2. Afterwards, I loaded on a custom recovery via ODIN 1.85 which now is philz_touch_6.07.9
Here is my problem now, I've tried searching everywhere and I can't really find the answer...
Whenever I try to side load a rom through ADB through Android tools (its in the right directory and everything because it transfers over), I keep getting an error message "E: Error in /tmp/update.zip (status 7) Installation Aborted."
Now before I get that error I get stuff like getprop("ro.product.device")==t0lte" ||getprop("ro.build.product").... etc. and it goes on and on.
So far the ROMs that I have tried were Cyanogenmod 10.1 and the Pacman Rom, and yes, both are for the correct device like the model name/number match up. And now how I said I thought I rooted the device, whenever I try to reboot into recovery via Philztouch, it says at the top Root Access is missing. Root device, and I click yes. When it reboots into recovery and I want to turn the phone off again, it still says Root Access is missing.
I am open for anything really. My friend just wants his phone to work again. and I've literally exhausted all of my ideas as I keep running into the same issue.
What am I doing wrong? and is something like this possible to fix? Or is my friend SOL?
Thanks for all the help. It's much appreciated.
Your recovery is outdated. Status 7 error.
I use TWRP from the original development section.
rangercaptain said:
Your recovery is outdated. Status 7 error.
I use TWRP from the original development section.
Click to expand...
Click to collapse
+1 to this^^^^^
Look here»»» http://forum.xda-developers.com/showthread.php?t=1981198
And why not give him something stock instead of a CM Rom??[emoji37]
Plenty of stock 4.3 Rom's in the development section...
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Good advice ^^^^ for your friend.
Ok, thanks for the direct response. I've downloaded the latest TWRP recovery and when I try to push it through ODIN, I still have PhilZ Touch 6..? Sorry, I feel like I'm skipping something simple...
according to a guide, I have to make sure when I'm pushing a custom recovery through ODIN I have to leave Auto Reboot and F. Reset Time UNCHECKED. I made sure they were, and for some reason after it says PASS and thread successful 1 failed 0. When I disconnect the phone and turn it back on into recovery mode, I still has PhilZ Touch...
Use your recovery to flash TWRP. There's a zip version and an odin version.
Ok, I got stock recovery on there just by redoing the CF-Auto Root package through ODIN.
I figured well I can apply the ROM the adb through the stock recovery...
It was going well until I got this error. The last line before the error stated:
"Veryfying update package..."
Error:
E: failed to verify whole-file signature
E: signature verification failed
is that due to the fact that i'm using stock recovery?
In the mean time since that didn't work I'm going to flash TWRP and hopefully that fixes the issue.
I'm kinda just documenting my steps here in case anyone wants to follow and chime in if i'm doing something wrong.
Thanks for the help guys!
************3AM EDIT*****************
Ok so I managed to get TWRP 2.7 on the device as I needed the ability to adb sideload the update.zip to the phone since I can't boot into the phone's OS whatsoever.
This is the error I'm receiving now:
Checking for MD5 file...
Skipping Md5 check: no MD5 file found.
then it restarts and I'm stuck at the Samsung GALAXY Note II screen... what's my next step..? Find a different ROM?
**********Another Edit**************
It has just come to me, I shouldn't have to adb sideload the update.zip or the custom rom... even though I can't get into the phones OS and can't copy and paste to the root of the device. Can't I just copy and paste it to a micro SD card and mount that, and then apply the update from there? And as far as those errors I had earlier, I'm still not sure why I received them...
Again, thanks for all the help
Adb won't work if USB debugging wasn't enabled.
In TWRP you can disable md5 checking.
And you don't unzip the zip file.
Thanks for the reply. ADB didn't work because, in fact, since I haven't been able to turn the phone on, I know USB debugging isn't turned on.
And as far as having the MD5 check, it is unchecked.
I received a success message. However, when I try to boot the phone it still gets stuck at the Samsung Galaxy Note II screen.
******Edit******
Ok ended up using a different ROM, I think PacMan rom? It seemed to work until it got to extracting system files and then the phone sits for a couple minutes, screen turns black. And when I try to wake the screen, only the back and menu buttons come up...
Another thing, even though I've already rooted my device using CF-Auto-Root, When I reboot my device with TWRP I go to reboot and then recovery. Then it warns me saying no OS bla bla bla, and then it says it notices that my phone isn't rooted? And that SuperSU isn't on the device. It asks to install it by swiping. I swipe it starts to install, phone reboots. When I reboot it again, it still tells me that the phone isn't rooted. And with the phone not being rooted, I'm coming to the conclusion why I'm having trouble trying to flash Roms.. Is this a possibility?
Why are you using ADB? just drop the .zip for the ROM you wish to flash onto a micro SD card, and flash from within the TWRP. Don't try to extract the .zip whatsoever.
My daughter's note 2, which looks to be in perfect condition, was running dirty unicorn. She messages me in a panic because the phone turned off on her, and wouldn't reboot.
I could get into recovery, but many of the options like factory reset wouldn't work. Reformatting /cache gives an error with ext4 and can't write, and at the bottom of some of the screens is an error about unable to access some log files in the /cache directory. Going to install zip to reinstall dirty unicorn doesn't seem to do anything, it can't find any files.
Wipe system gives errors like "format_volume: make_extf4fs failed on /dev/block/mmcblk0p12". It can't mount /data, just gives an error.
I tried reflashing the stock mj4 via odin, which ran successfully, but didn't resolve anything.
Tried using KIES 2.6, which did go into download mode and said it downloaded a bunch of stuff and then flashed the phone, but it's still stuck at the bootloader.
I tried flashing a bootloader, but am unclear of how to flash the param file if necessary (does it go in bootloader? PDA? what slot in odin?).
I need some ideas. Maybe the flash has died on it, and it's unrecoverable, but it's in such perfect shape that I hate to just toss it.
I have recover 6.0.4.3 (CWM) installed, and can still get into it. But upon loading recovery, it gives me errors like "Can't mount /cache/recovery/command", "Can't open /cache/recovery/last_log", etc.
Any help appreciated.
mrcpu said:
My daughter's note 2, which looks to be in perfect condition, was running dirty unicorn. She messages me in a panic because the phone turned off on her, and wouldn't reboot.
I could get into recovery, but many of the options like factory reset wouldn't work. Reformatting /cache gives an error with ext4 and can't write, and at the bottom of some of the screens is an error about unable to access some log files in the /cache directory. Going to install zip to reinstall dirty unicorn doesn't seem to do anything, it can't find any files.
Wipe system gives errors like "format_volume: make_extf4fs failed on /dev/block/mmcblk0p12". It can't mount /data, just gives an error.
I tried reflashing the stock mj4 via odin, which ran successfully, but didn't resolve anything.
Tried using KIES 2.6, which did go into download mode and said it downloaded a bunch of stuff and then flashed the phone, but it's still stuck at the bootloader.
I tried flashing a bootloader, but am unclear of how to flash the param file if necessary (does it go in bootloader? PDA? what slot in odin?).
I need some ideas. Maybe the flash has died on it, and it's unrecoverable, but it's in such perfect shape that I hate to just toss it.
I have recover 6.0.4.3 (CWM) installed, and can still get into it. But upon loading recovery, it gives me errors like "Can't mount /cache/recovery/command", "Can't open /cache/recovery/last_log", etc.
Any help appreciated.
Click to expand...
Click to collapse
The other weird thing is that I used odin 3.06 to flash twrp 2.8.5, or at least attempt to, download processed, device reset, but recovery is still CWM 6.0.4.3. WTH?
Ok check this thread where I just helped fix a note 2, simular to your situation ok.
Plenty of links in there for you. Keep in mind everything in this thread I'm sending you too it's for the AT&T i317 ok.
http://forum.xda-developers.com/showthread.php?p=59000961
Which I'm sure that is what you have, posting your problem in the Att q&a thread.
Bajanman said:
Ok check this thread where I just helped fix a note 2, simular to your situation ok.
Plenty of links in there for you. Keep in mind everything in this thread I'm sending you too it's for the AT&T i317 ok.
http://forum.xda-developers.com/showthread.php?p=59000961
Which I'm sure that is what you have, posting your problem in the Att q&a thread.
Click to expand...
Click to collapse
Correct, it is an AT&T. I have tried the options in that thread, but I swear, nothing I flash actually "sticks". I've used odin 3.06, put the files in PDA, plugged it in in download mode, the progress bar appears on both odin and the phone, it resets, it reboots, and nada. Hung.
I can't even flash a replacement recovery, nothing "sticks". I've used KIES to flash, it tells me it's successful, but I still have CWM 6.0.4.3. I've tried the original 4.1.1, NJ1 (rooted), I've tried flashing a bootloader, then tried the one with the param file attached, I downloaded a pit file, followed the directions on that page with the Re-partition option, and I still can't get anywhere with it.
If I cold even just get a different recovery installed, just so that I *know*, my odin is OK, then I'd feel better about making progress.
I've tried to flash philz_touch 6.48.4, openrecovery-twrp-2.8.5 through odin, and I can't even get the CWM recovery replaced. Odin reports success, reboots the device, frozen.
I swear, if this was one of my servers at work, I'd figured the NSA has hacked the firmware to just discard writes and report back success.
I'm not crystal clear in ODIN how to flash bootloaders, on one hand, presumably, the "bootloader" button, but one guide shows the bootloader file being put in PDA, so who knows. I may have ended up with a bootloader mismatch, but I thought flashing the latest stock recoveries.
FWIW, the phone was running Dirty Unicorn, although I'm unsure of specifically which version, she's had it for a while.
Thanks for any help.
Just realized something.
If I hold down the power/vol down/home and boot into download mode, I get the little red "odin mode" at the top left, 4 lines of text about custom, etc, and then the green android icon.
If I boot into recovery, then use it to boot into download mode, the green android is there, but none of the text (odin mode, etc) is on the screen. Is this normal?
I have also been having some strangeness with my Telus Note II. Very similar symptoms to what you're describing. One morning I woke up to my phone stuck on the Samsung logo as the phone must have rebooted itself overnight. When I tried to reboot it would freeze at the same spot once again. I tried to go into recover (TWRP) and it wouldn't, and a subsequent reboot left me in a boot loop.
Nothing I tried would help. I couldn't get into TWRP. Using ODIN 3.07 I put on CWM and I was able to get into recovery now, but nothing in it worked. Finally I tried using ODIN to put on CF-Auto-Root-t0ltecan-t0ltevl-sghi317m and I was finally able to get into a recovery that allowed me to do a factory reset. Once I did that I was able to boot up the phone.
I then re-installed TWRP and restored a back up that I had, and everything was normal again. The phone was running great. However, sometime at night things get messed up again. The phone has either reboot itself, and get's stuck again. I then have to repeat this whole process. During the day, the phone runs amazing. It almost seems to run better than before. However at night, if I'm on battery it will get messed up again.
I hope this helps you. Good luck.
have you tried all this using the same computer and usb cable? i would try a different computer, port, usb and re download all files again. perhaps use a different version of odin. good luck:fingers-crossed:
It's the same computer and cable I do my Note 3, and kindle fire 8.9, and with a different cable my nook HD, so I'm skeptical that it's any of those pieces, but for the heckuvit, I will try a different one.
Note 2 GT N 7100 --Stuck on CWM 6.0.4.3
gizhola said:
I have also been having some strangeness with my Telus Note II. Very similar symptoms to what you're describing. One morning I woke up to my phone stuck on the Samsung logo as the phone must have rebooted itself overnight. When I tried to reboot it would freeze at the same spot once again. I tried to go into recover (TWRP) and it wouldn't, and a subsequent reboot left me in a boot loop.
Nothing I tried would help. I couldn't get into TWRP. Using ODIN 3.07 I put on CWM and I was able to get into recovery now, but nothing in it worked. Finally I tried using ODIN to put on CF-Auto-Root-t0ltecan-t0ltevl-sghi317m and I was finally able to get into a recovery that allowed me to do a factory reset. Once I did that I was able to boot up the phone.
I then re-installed TWRP and restored a back up that I had, and everything was normal again. The phone was running great. However, sometime at night things get messed up again. The phone has either reboot itself, and get's stuck again. I then have to repeat this whole process. During the day, the phone runs amazing. It almost seems to run better than before. However at night, if I'm on battery it will get messed up again.
I hope this helps you. Good luck.
Click to expand...
Click to collapse
Dear friends, sorry for my interference, i having CWM recovery v 6.0.4.3 on GT N7100, i used to flash omega ROM 4.3, everything went well until i got stuck on Samsung log and the phone did want restart, i decided to go on CWM recovery, stunned with this message
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
Still I can go on download mode, I tried use odin to flash stock rom but failed it takes me always to CWM v 6.0.4.3 where it stuck and dont allow me to format or do any thing except my external sd1 that I tried to flash from but returned to same prob ( CWM v 6.0.43)
also I tried to flash tried twrp 2.8.0.4 but failed
the prob is my internal sd can't be mounted and whatever i do don't pass
I read in your post something about flashing auto root in odin or fix CWM root
can you help please Im stuck in CWM v 6.0.4.3
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
You probably need to do a factory reset
In the future you should make a full backup before installing a rom
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
AHH!! Sorry to have made this post... here's what I did to get it actually boot:
reflahed the stock firmware through odin again, tried to reboot, it failed, obviously. rebooted to recovery, factory reset in recovery, power down option in recovery, then turned the phone on again and it magically worked!
hopefully this post will help someone who encountered the same issue
eousphoros said:
You probably need to do a factory reset
In the future you should make a full backup before installing a rom
Click to expand...
Click to collapse
thank you so much for the quick reply, I ended up figuring out the solution while you were typing. sorry to pull you away from other tasks. I have several backups saved to my PC but thank you for the reminder!! :laugh::laugh:
kswa1987 said:
AHH!! Sorry to have made this post... here's what I did to get it actually boot:
reflahed the stock firmware through odin again, tried to reboot, it failed, obviously. rebooted to recovery, factory reset in recovery, power down option in recovery, then turned the phone on again and it magically worked!
hopefully this post will help someone who encountered the same issue
Click to expand...
Click to collapse
I had the same excat same thing happen when flashing this via Odin. I didnt need to Odin stock twice though . I just booted stock recovery and did a factory reset. After that I went ahead an powered down and rebooted . All good now
How long did you have to wait in the stock recovery to get past the "installing system update" screen? Mine just sits there and I'm unable to view other options in recovery.
EDIT for noobs (like me): wait 30 seconds on the "installing system update" screen.
I'm still stuck in boot loop
Im in the same exact situation , but I'm still stuck in boot loop. I followed your restore instructions and nothing. Please help.
Creel711 said:
Im in the same exact situation , but I'm still stuck in boot loop. I followed your restore instructions and nothing. Please help.
Click to expand...
Click to collapse
Looks here, may apply to your case. http://forum.xda-developers.com/showthread.php?p=63226466
Pp.
I initially used odin to flash OI1 update, after a rom I was using caused problems and I got bootloop. It changed bootloader value to b:3 and I'm unable to downgrade now so I used smart switch which didn't recognize device so used emergency recovery and still bootloop. I have factory reset and wipe cache multiple times along with adb side load and individual flashes of bootloader, modem, kernel, flashed custom kernel and twrp to access fix permissions and to mount partitions with advanced wipe etc and still wont boot past logo. Also during one fix attempt phone said can't mount system.. Idk I'm not understanding where the problem is .everything says successful but I'm still in bootloop. Please help. I've spent hours everyday for the past week searching & trying different things that seem might help so open to any suggestions.
Problem with Samsung Galaxy S4 Mini GT-I9195
Hi everyone
I'm new to the whole ROM flashing and using Odin. I had a bootloop problem and recovery mode showed all the options but has a green android man laying down with red icon above him and No Command below the android man. Tried the factory wipe and cache wipe but it gives some red writing with the word failed in the coding and the word error under the android man. Tried to flash a stock ROM from sammobile using Odin. Odin gives a pass but the same problems persist. Can someone please help?
any solution, i have this problem to? only bootloop, nothing else. Updatet bootloader with 4up
kswa1987 said:
Hi guys,
I have the t-mobile s6 edge
After messing around with my device last night and this morning, I decided to go back to stock for a bit.
I have ODIN 3.10.6. I went into download mode on my phone. extracted the stock firmware from this thread: http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
loaded the "G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5" file into the ap box for odin
connected my phone to computer, odin recognized it. hit start. ran successfully. rebooted, android guy came up briefly and said installing system update, then it changed to "Erasing..." then it rebooted again
now it's just bootloops forever after the tmobile screen. I can boot to recovery and it says installing system update each time I boot to recovery, but selecting reboot system there shows a no command error. force the phone to power off... power on again to bootloops.
tried to go into download mode again and reflash everything through odin, same issue!
I started last night by rooting using chainfire, then installing TWRPv2, then I flashed the 5.1.1 ROM available from @eousphoros (sorry for the tag, just thought you might want to be apprised of the issues in getting back to stock after using the 5.1.1 ROM).
with 5.1.1 loaded, smart switch didn't recognize the phone for a reset so I decided to go with the ODIN method and now i'm in bootloop city
any help would be greatly appreciated
Click to expand...
Click to collapse
had the same issue ... did a factory wipe...(had lineage os 14 installed with gapps 7.1.1) flashed stock rom using odin(success) . stuck in bootloop(samsung logo fades in and out) pleaase help (sm-g900H)
Very usefull post, same issue, solved trough recovery->wipedata/factoryreset. Thanks!!!!
my s6 was freezing and restarting again and again, I reinstalled the firmware for odin and then it didn't encounter any problem for a whole day but now i have the same problem again - freezing and restarting
any help would be appreciated
I am already done with factory reset and wiping cache partition but still nothing turnout to be helpful
Hi Please help me.
I did everything that mentioned but no succes at all. Any new suggestion?
Btw my phone passing ODIN and stuck in "installing system updates then erasing"
hello
i need downgred g925t frome androide 7 to 6 or 5.1.1
can anyone help me
im flashed phone whit dis frimwer from anroide 7 G925TUVS6FRC1_G925TTMB6FRC1_TMB
im dawnloaded this frimwer 4Files-G925TTMB3EPD1-6.0.1-By-NoLoGiG but not work or not flashed have error